forks/forgejo
1
0
Fork 0
Code Releases Activity

[GITEA] Allow changing the email address before activation

Browse source 
During registration, one may be required to give their email address, to
be verified and activated later. However, if one makes a mistake, a
typo, they may end up with an account that cannot be activated due to
having a wrong email address.

They can still log in, but not change the email address, thus, no way to
activate it without help from an administrator.

To remedy this issue, lets allow changing the email address for logged
in, but not activated users.

This fixes gitea#17785.

Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit aaaece28e4)
(cherry picked from commit 639dafabec)
(cherry picked from commit d699c12ceb)

[GITEA] Allow changing the email address before activation (squash) cache is always active

This needs to be revisited because the MailResendLimit is not enforced
and turns out to not be tested.

See e7cb8da2a8 * Always enable caches (#28527)

(cherry picked from commit 43ded8ee30)

Rate limit pre-activation email change separately

Changing the email address before any email address is activated should
be subject to a different rate limit than the normal activation email
resending. If there's only one rate limit for both, then if a newly
signed up quickly discovers they gave a wrong email address, they'd have
to wait three minutes to change it.

With the two separate limits, they don't - but they'll have to wait
three minutes before they can change the email address again.

The downside of this setup is that a malicious actor can alternate
between resending and changing the email address (to something like
`user+$idx@domain`, delivered to the same inbox) to effectively halving
the rate limit. I do not think there's a better solution, and this feels
like such a small attack surface that I'd deem it acceptable.

The way the code works after this change is that `ActivatePost` will now
check the `MailChangeLimit_user` key rather than `MailResendLimit_user`,
and if we're within the limit, it will set `MailChangedJustNow_user`. The
`Activate` method - which sends the activation email, whether it is a
normal resend, or one following an email change - will check
`MailChangedJustNow_user`, and if it is set, it will check the rate
limit against `MailChangedLimit_user`, otherwise against
`MailResendLimit_user`, and then will delete the
`MailChangedJustNow_user` key from the cache.

Fixes #2040.

Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e35d2af2e5)
This commit is contained in:
Gergely Nagy 2023-12-07 12:57:16 +01:00 committed by Earl Warren
parent a0ad36f0ad
commit 03989418a7
No known key found for this signature in database
GPG key ID: 0579CB2928A78A00
6 changed files with 212 additions and 28 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

77
models/user/email_address.go
View file

@ -375,31 +375,7 @@ func updateActivation(ctx context.Context, email *EmailAddress, activate bool) e
return UpdateUserCols(ctx, user, "rands")
}
// MakeEmailPrimary sets primary email address of given user.
func MakeEmailPrimary(ctx context.Context, email *EmailAddress) error {
has, err := db.GetEngine(ctx).Get(email)
if err != nil {
return err
} else if !has {
return ErrEmailAddressNotExist{Email: email.Email}
}
if !email.IsActivated {
return ErrEmailNotActivated
}
user := &User{}
has, err = db.GetEngine(ctx).ID(email.UID).Get(user)
if err != nil {
return err
} else if !has {
return ErrUserNotExist{
UID: email.UID,
Name: "",
KeyID: 0,
}
}
func makeEmailPrimary(ctx context.Context, user *User, email *EmailAddress) error {
ctx, committer, err := db.TxContext(ctx)
if err != nil {
return err
@ -429,6 +405,57 @@ func MakeEmailPrimary(ctx context.Context, email *EmailAddress) error {
return committer.Commit()
}
// ReplaceInactivePrimaryEmail replaces the primary email of a given user, even if the primary is not yet activated.
func ReplaceInactivePrimaryEmail(ctx context.Context, oldEmail string, email *EmailAddress) error {
user := &User{}
has, err := db.GetEngine(ctx).ID(email.UID).Get(user)
if err != nil {
return err
} else if !has {
return ErrUserNotExist{
UID: email.UID,
Name: "",
KeyID: 0,
}
}
err = AddEmailAddress(ctx, email)
if err != nil {
return err
}
err = makeEmailPrimary(ctx, user, email)
if err != nil {
return err
}
return DeleteEmailAddress(ctx, &EmailAddress{UID: email.UID, Email: oldEmail})
}
// MakeEmailPrimary sets primary email address of given user.
func MakeEmailPrimary(ctx context.Context, email *EmailAddress) error {
has, err := db.GetEngine(ctx).Get(email)
if err != nil {
return err
} else if !has {
return ErrEmailAddressNotExist{Email: email.Email}
}
if !email.IsActivated {
return ErrEmailNotActivated
}
user := &User{}
has, err = db.GetEngine(ctx).ID(email.UID).Get(user)
if err != nil {
return err
} else if !has {
return ErrUserNotExist{UID: email.UID}
}
return makeEmailPrimary(ctx, user, email)
}
// VerifyActiveEmailCode verifies active email code when active account
func VerifyActiveEmailCode(ctx context.Context, code, email string) *EmailAddress {
minutes := setting.Service.ActiveCodeLives

22
models/user/email_address_test.go
View file

@ -167,6 +167,28 @@ func TestMakeEmailPrimary(t *testing.T) {
assert.Equal(t, "user101@example.com", user.Email)
}
func TestReplaceInactivePrimaryEmail(t *testing.T) {
assert.NoError(t, unittest.PrepareTestDatabase())
email := &user_model.EmailAddress{
Email: "user9999999@example.com",
UID: 9999999,
}
err := user_model.ReplaceInactivePrimaryEmail(db.DefaultContext, "user10@example.com", email)
assert.Error(t, err)
assert.True(t, user_model.IsErrUserNotExist(err))
email = &user_model.EmailAddress{
Email: "user201@example.com",
UID: 10,
}
err = user_model.ReplaceInactivePrimaryEmail(db.DefaultContext, "user10@example.com", email)
assert.NoError(t, err)
user := unittest.AssertExistsAndLoadBean(t, &user_model.User{ID: 10})
assert.Equal(t, "user201@example.com", user.Email)
}
func TestActivate(t *testing.T) {
assert.NoError(t, unittest.PrepareTestDatabase())

5
options/locale/locale_en-US.ini
View file

@ -367,7 +367,7 @@ forgot_password_title= Forgot Password
forgot_password = Forgot password?
sign_up_now = Need an account? Register now.
sign_up_successful = Account was successfully created. Welcome!
confirmation_mail_sent_prompt = A new confirmation email has been sent to <b>%s</b>. Please check your inbox within the next %s to complete the registration process.
confirmation_mail_sent_prompt = A new confirmation email has been sent to <b>%s</b>. Please check your inbox within the next %s to complete the registration process. If the email is incorrect, you can log in, and request another confirmation email to be sent to a different address.
must_change_password = Update your password
allow_password_change = Require user to change password (recommended)
reset_password_mail_sent_prompt = A confirmation email has been sent to <b>%s</b>. Please check your inbox within the next %s to complete the account recovery process.
@ -377,6 +377,9 @@ prohibit_login = Sign In Prohibited
prohibit_login_desc = Your account is prohibited from signing in, please contact your site administrator.
resent_limit_prompt = You have already requested an activation email recently. Please wait 3 minutes and try again.
has_unconfirmed_mail = Hi %s, you have an unconfirmed email address (<b>%s</b>). If you haven't received a confirmation email or need to resend a new one, please click on the button below.
change_unconfirmed_email_summary = Change the email address activation mail is sent to.
change_unconfirmed_email = If you have given the wrong email address during registration, you can change it below, and a confirmation will be sent to the new address instead.
change_unconfirmed_email_error = Unable to change the email address: %v
resend_mail = Click here to resend your activation email
email_not_associate = The email address is not associated with any account.
send_reset_mail = Send Account Recovery Email

50
routers/web/auth/auth.go
View file

@ -647,13 +647,22 @@ func Activate(ctx *context.Context) {
}
// Resend confirmation email.
if setting.Service.RegisterEmailConfirm {
if ctx.Cache.IsExist("MailResendLimit_" + ctx.Doer.LowerName) {
var cacheKey string
if ctx.Cache.IsExist("MailChangedJustNow_" + ctx.Doer.LowerName) {
cacheKey = "MailChangedLimit_"
if err := ctx.Cache.Delete("MailChangedJustNow_" + ctx.Doer.LowerName); err != nil {
log.Error("Delete cache(MailChangedJustNow) fail: %v", err)
}
} else {
cacheKey = "MailResendLimit_"
}
if ctx.Cache.IsExist(cacheKey + ctx.Doer.LowerName) {
ctx.Data["ResendLimited"] = true
} else {
ctx.Data["ActiveCodeLives"] = timeutil.MinutesToFriendly(setting.Service.ActiveCodeLives, ctx.Locale)
mailer.SendActivateAccountMail(ctx.Locale, ctx.Doer)
if err := ctx.Cache.Put("MailResendLimit_"+ctx.Doer.LowerName, ctx.Doer.LowerName, 180); err != nil {
if err := ctx.Cache.Put(cacheKey+ctx.Doer.LowerName, ctx.Doer.LowerName, 180); err != nil {
log.Error("Set cache(MailResendLimit) fail: %v", err)
}
}
@ -687,6 +696,43 @@ func Activate(ctx *context.Context) {
func ActivatePost(ctx *context.Context) {
code := ctx.FormString("code")
if len(code) == 0 {
email := ctx.FormString("email")
if len(email) > 0 {
ctx.Data["IsActivatePage"] = true
if ctx.Doer == nil || ctx.Doer.IsActive {
ctx.NotFound("invalid user", nil)
return
}
// Change the primary email
if setting.Service.RegisterEmailConfirm {
if ctx.Cache.IsExist("MailChangeLimit_" + ctx.Doer.LowerName) {
ctx.Data["ResendLimited"] = true
} else {
ctx.Data["ActiveCodeLives"] = timeutil.MinutesToFriendly(setting.Service.ActiveCodeLives, ctx.Locale)
err := user_model.ReplaceInactivePrimaryEmail(ctx, ctx.Doer.Email, &user_model.EmailAddress{
UID: ctx.Doer.ID,
Email: email,
})
if err != nil {
ctx.Data["IsActivatePage"] = false
log.Error("Couldn't replace inactive primary email of user %d: %v", ctx.Doer.ID, err)
ctx.RenderWithErr(ctx.Tr("auth.change_unconfirmed_email_error", err), TplActivate, nil)
return
}
if err := ctx.Cache.Put("MailChangeLimit_"+ctx.Doer.LowerName, ctx.Doer.LowerName, 180); err != nil {
log.Error("Set cache(MailChangeLimit) fail: %v", err)
}
if err := ctx.Cache.Put("MailChangedJustNow_"+ctx.Doer.LowerName, ctx.Doer.LowerName, 180); err != nil {
log.Error("Set cache(MailChangedJustNow) fail: %v", err)
}
// Confirmation mail will be re-sent after the redirect to `/user/activate` below.
}
} else {
ctx.Data["ServiceNotEnabled"] = true
}
}
ctx.Redirect(setting.AppSubURL + "/user/activate")
return
}

10
templates/user/auth/activate.tmpl
View file

@ -39,6 +39,16 @@
{{else}}
<p>{{ctx.Locale.Tr "auth.has_unconfirmed_mail" (.SignedUser.Name|Escape) (.SignedUser.Email|Escape) | Str2html}}</p>
<div class="divider"></div>
<details class="inline field">
<summary>{{ctx.Locale.Tr "auth.change_unconfirmed_email_summary"}}</summary>
<p>{{ctx.Locale.Tr "auth.change_unconfirmed_email"}}</p>
<div class="inline field">
<label for="email">{{ctx.Locale.Tr "email"}}</label>
<input id="email" name="email" type="email" autocomplete="on">
</div>
</details>
<div class="text right">
<button class="ui primary button">{{ctx.Locale.Tr "auth.resend_mail"}}</button>
</div>

76
tests/integration/signup_test.go
View file

@ -12,6 +12,7 @@ import (
"code.gitea.io/gitea/models/unittest"
user_model "code.gitea.io/gitea/models/user"
"code.gitea.io/gitea/modules/setting"
"code.gitea.io/gitea/modules/test"
"code.gitea.io/gitea/modules/translation"
"code.gitea.io/gitea/tests"
@ -91,3 +92,78 @@ func TestSignupEmail(t *testing.T) {
}
}
}
func TestSignupEmailChangeForInactiveUser(t *testing.T) {
defer tests.PrepareTestEnv(t)()
// Disable the captcha & enable email confirmation for registrations
defer test.MockVariableValue(&setting.Service.EnableCaptcha, false)()
defer test.MockVariableValue(&setting.Service.RegisterEmailConfirm, true)()
// Create user
req := NewRequestWithValues(t, "POST", "/user/sign_up", map[string]string{
"user_name": "exampleUserX",
"email": "wrong-email@example.com",
"password": "examplePassword!1",
"retype": "examplePassword!1",
})
MakeRequest(t, req, http.StatusOK)
session := loginUserWithPassword(t, "exampleUserX", "examplePassword!1")
// Verify that the initial e-mail is the wrong one.
user := unittest.AssertExistsAndLoadBean(t, &user_model.User{Name: "exampleUserX"})
assert.Equal(t, "wrong-email@example.com", user.Email)
// Change the email address
req = NewRequestWithValues(t, "POST", "/user/activate", map[string]string{
"email": "fine-email@example.com",
})
session.MakeRequest(t, req, http.StatusSeeOther)
// Verify that the email was updated
user = unittest.AssertExistsAndLoadBean(t, &user_model.User{Name: "exampleUserX"})
assert.Equal(t, "fine-email@example.com", user.Email)
// Try to change the email again
req = NewRequestWithValues(t, "POST", "/user/activate", map[string]string{
"email": "wrong-again@example.com",
})
session.MakeRequest(t, req, http.StatusSeeOther)
// Verify that the email was NOT updated
user = unittest.AssertExistsAndLoadBean(t, &user_model.User{Name: "exampleUserX"})
assert.Equal(t, "fine-email@example.com", user.Email)
}
func TestSignupEmailChangeForActiveUser(t *testing.T) {
defer tests.PrepareTestEnv(t)()
// Disable the captcha & enable email confirmation for registrations
defer test.MockVariableValue(&setting.Service.EnableCaptcha, false)()
defer test.MockVariableValue(&setting.Service.RegisterEmailConfirm, false)()
// Create user
req := NewRequestWithValues(t, "POST", "/user/sign_up", map[string]string{
"user_name": "exampleUserY",
"email": "wrong-email-2@example.com",
"password": "examplePassword!1",
"retype": "examplePassword!1",
})
MakeRequest(t, req, http.StatusSeeOther)
session := loginUserWithPassword(t, "exampleUserY", "examplePassword!1")
// Verify that the initial e-mail is the wrong one.
user := unittest.AssertExistsAndLoadBean(t, &user_model.User{Name: "exampleUserY"})
assert.Equal(t, "wrong-email-2@example.com", user.Email)
// Changing the email for a validated address is not available
req = NewRequestWithValues(t, "POST", "/user/activate", map[string]string{
"email": "fine-email-2@example.com",
})
session.MakeRequest(t, req, http.StatusNotFound)
// Verify that the email remained unchanged
user = unittest.AssertExistsAndLoadBean(t, &user_model.User{Name: "exampleUserY"})
assert.Equal(t, "wrong-email-2@example.com", user.Email)
}