1
0
Fork 0
peertube/support/doc/dependencies.md

614 lines
16 KiB
Markdown
Raw Permalink Normal View History

2018-01-12 17:55:45 +00:00
# Dependencies
2018-01-12 17:07:41 +00:00
:warning: **Warning**: dependencies guide is maintained by the community. Some parts may be outdated! :warning:
Main dependencies version supported by PeerTube:
* `node` >=18.x
2024-02-15 08:01:01 +00:00
* `yarn` 1.x (**must not be >=2.x**)
* `postgres` >=10.x
2023-02-28 10:45:57 +00:00
* `redis-server` >=6.x
2024-04-02 09:00:53 +00:00
* `ffmpeg` >=4.3 (using a ffmpeg static build [is not recommended](https://github.com/Chocobozzz/PeerTube/issues/6308))
_note_: only **LTS** versions of external dependencies are supported. If no LTS version matching the version constraint is available, only **release** versions are supported.
2018-09-23 13:18:02 +00:00
<!-- START doctoc generated TOC please keep comment here to allow auto update -->
<!-- DON'T EDIT THIS SECTION, INSTEAD RE-RUN doctoc TO UPDATE -->
2022-05-20 14:02:57 +00:00
- [Debian / Ubuntu and derivatives](#debian-ubuntu-and-derivatives)
2018-09-23 13:18:02 +00:00
- [Arch Linux](#arch-linux)
- [CentOS 7](#centos-7)
2021-09-02 09:54:13 +00:00
- [Centos 8](#centos-8)
- [Rocky Linux 8.4](#rocky-linux-84)
2018-09-23 13:18:02 +00:00
- [Fedora](#fedora)
2021-09-02 09:54:13 +00:00
- [Red Hat Enterprise Linux 8](#red-hat-enterprise-linux-8)
2018-09-23 13:18:02 +00:00
- [FreeBSD](#freebsd)
- [macOS](#macos)
- [Gentoo](#gentoo)
2021-09-02 09:54:13 +00:00
- [OpenBSD](#openbsd)
2018-09-23 13:18:02 +00:00
- [Other distributions](#other-distributions)
<!-- END doctoc generated TOC please keep comment here to allow auto update -->
## Debian / Ubuntu and derivatives
1. On a fresh Debian/Ubuntu, as root user, install basic utility programs needed for the installation
```
2018-03-14 08:15:17 +00:00
# apt-get install curl sudo unzip vim
```
2. It would be wise to disable root access and to continue this tutorial with a user with sudoers group access. You can see a guide for how to do this in Debian/Ubuntu [here](https://www.digitalocean.com/community/tutorials/how-to-add-and-delete-users-on-ubuntu-20-04).
3. Install NodeJS 18.x:
2024-04-16 07:39:49 +00:00
[https://nodejs.org/en/download/package-manager/all#debian-and-ubuntu-based-linux-distributions](https://nodejs.org/en/download/package-manager/all#debian-and-ubuntu-based-linux-distributions)
2021-01-11 09:09:24 +00:00
4. Install yarn, and be sure to have [a recent version](https://github.com/yarnpkg/yarn/releases/latest):
[https://yarnpkg.com/en/docs/install#linux-tab](https://yarnpkg.com/en/docs/install#linux-tab)
2018-01-12 17:07:41 +00:00
2021-09-02 09:54:13 +00:00
5. Install Python:
On Ubuntu <= bionic (18.04 LTS) or Debian <= Buster:
```
sudo apt update
sudo apt install python-dev
python --version # Should be >= 2.x or >= 3.x
```
On Ubuntu >= focal (20.04 LTS) or Debian >= Bullseye:
```
sudo apt update
sudo apt install python3-dev python-is-python3 # python-is-python2 should also work
python --version # Should be >= 2.x or >= 3.x
```
6. Install common dependencies:
2018-01-12 17:07:41 +00:00
2018-01-12 17:55:45 +00:00
```
sudo apt update
2021-09-02 09:54:13 +00:00
sudo apt install certbot nginx ffmpeg postgresql postgresql-contrib openssl g++ make redis-server git cron wget
2020-08-11 14:21:29 +00:00
ffmpeg -version # Should be >= 4.1
g++ -v # Should be >= 5.x
2023-02-28 10:45:57 +00:00
redis-server --version # Should be >= 6.x
2018-01-12 17:07:41 +00:00
```
Now that dependencies are installed, before running PeerTube you should start PostgreSQL and Redis:
```
sudo systemctl start redis postgresql
```
2018-01-12 17:55:45 +00:00
## Arch Linux
2018-01-12 17:07:41 +00:00
1. Run:
2018-01-12 17:07:41 +00:00
2018-01-12 17:55:45 +00:00
```
2021-12-24 12:52:32 +00:00
sudo pacman -S nodejs-lts-fermium yarn ffmpeg postgresql openssl redis git wget unzip python base-devel npm nginx
2018-01-12 17:07:41 +00:00
```
Now that dependencies are installed, before running PeerTube you should start PostgreSQL and Redis:
```
sudo systemctl start redis postgresql
```
## CentOS 7
1. Install NodeJS 18.x:
2024-04-16 07:39:49 +00:00
[https://nodejs.org/en/download/package-manager/all#centos-fedora-and-red-hat-enterprise-linux](https://nodejs.org/en/download/package-manager/all#centos-fedora-and-red-hat-enterprise-linux)
2020-08-11 14:21:29 +00:00
2. Install yarn:
[https://yarnpkg.com/en/docs/install](https://yarnpkg.com/en/docs/install)
3. Install or compile ffmpeg:
* Install - [https://linoxide.com/linux-how-to/install-ffmpeg-centos-7/](https://linoxide.com/linux-how-to/install-ffmpeg-centos-7/)
* Compile - [https://gist.github.com/mustafaturan/7053900#file-latest-ffmpeg-centos6-sh](https://gist.github.com/mustafaturan/7053900#file-latest-ffmpeg-centos6-sh)
2020-08-11 14:21:29 +00:00
4. Install Packages:
```
sudo yum update
sudo yum install epel-release centos-release-scl
sudo yum update
sudo yum install nginx postgresql postgresql-server postgresql-contrib openssl gcc-c++ make wget redis git devtoolset-7
```
5. You need to use a more up to date version of G++ in order to run the yarn install command, hence the installation of devtoolset-7.
```
sudo scl enable devtoolset-7 bash
```
Later when you invoke any node command, please prefix them with `CC=/opt/rh/devtoolset-7/root/usr/bin/gcc CXX=/opt/rh/devtoolset-7/root/usr/bin/g++`, such as with:
```
sudo -H -u peertube CC=/opt/rh/devtoolset-7/root/usr/bin/gcc CXX=/opt/rh/devtoolset-7/root/usr/bin/g++ yarn install --production --pure-lockfile
```
2020-08-11 14:21:29 +00:00
6. Initialize the PostgreSQL database:
```
sudo PGSETUP_INITDB_OPTIONS='--auth-host=md5' postgresql-setup --initdb --unit postgresql
```
2020-08-11 14:21:29 +00:00
Now that dependencies are installed, before running PeerTube you should enable and start PostgreSQL and Redis:
```
sudo systemctl enable --now redis
sudo systemctl enable --now postgresql
```
## Centos 8
1. Install NodeJS 18.x:
2024-04-16 07:39:49 +00:00
[https://nodejs.org/en/download/package-manager/all#centos-fedora-and-red-hat-enterprise-linux](https://nodejs.org/en/download/package-manager/all#centos-fedora-and-red-hat-enterprise-linux)
2020-08-11 14:21:29 +00:00
2. Install yarn:
[https://yarnpkg.com/en/docs/install](https://yarnpkg.com/en/docs/install)
3. Install or compile ffmpeg:
```
sudo dnf install epel-release dnf-utils
sudo yum-config-manager --set-enabled powertools
sudo yum-config-manager --add-repo=https://negativo17.org/repos/epel-multimedia.repo
sudo dnf install ffmpeg
```
2020-08-11 14:21:29 +00:00
4. Install packages:
```
sudo dnf update
2020-08-11 14:21:29 +00:00
sudo dnf install epel-release
sudo dnf update
sudo dnf install nginx postgresql postgresql-server postgresql-contrib openssl gcc-c++ make wget redis git unzip
```
5. You'll need a symlink for python3 to python for youtube-dl to work
```
sudo ln -s /usr/bin/python3 /usr/bin/python
```
2020-08-11 14:21:29 +00:00
6. Initialize the PostgreSQL database:
```
sudo PGSETUP_INITDB_OPTIONS='--auth-host=md5' postgresql-setup --initdb --unit postgresql
```
2020-08-11 14:21:29 +00:00
Now that dependencies are installed, before running PeerTube you should enable and start PostgreSQL and Redis:
```
sudo systemctl enable --now redis
sudo systemctl enable --now postgresql
```
2021-08-26 07:02:22 +00:00
## Rocky Linux 8.4
2021-08-26 07:02:22 +00:00
1. Pull the latest updates:
```
sudo dnf update -y
```
2. Install NodeJS 18.x:
```
sudo dnf module install -y nodejs:18
```
2021-08-26 07:02:22 +00:00
3. Install yarn:
```
sudo npm install --global yarn
```
2021-08-26 07:02:22 +00:00
4. Install or compile ffmpeg (if you want to compile... enjoy):
```
2021-08-26 07:02:22 +00:00
sudo dnf install -y epel-release
sudo dnf --enablerepo=powertools install -y SDL2 SDL2-devel
sudo dnf install -y --nogpgcheck https://download1.rpmfusion.org/free/el/rpmfusion-free-release-8.noarch.rpm https://download1.rpmfusion.org/nonfree/el/rpmfusion-nonfree-release-8.noarch.rpm
sudo dnf install -y ffmpeg
sudo dnf update -y
```
5. Install PostgreSQL and Python3 and other stuff:
```
sudo dnf install -y nginx postgresql postgresql-server postgresql-contrib openssl gcc-c++ make wget redis git python3
sudo ln -s /usr/bin/python3 /usr/bin/python
sudo PGSETUP_INITDB_OPTIONS='--auth-host=md5' postgresql-setup --initdb --unit postgresql
sudo systemctl enable --now redis
sudo systemctl enable --now postgresql
```
6. Configure the peertube user:
```
sudo useradd -m -d /var/www/peertube -s /bin/bash -p peertube peertube
```
7. Unknown missing steps:
2021-08-26 07:02:22 +00:00
- Steps missing here... these were adapted from the CentOS 8 steps which abruptly ended.
- /var/www/peertube does not exist yet (expected? done in future steps? documentation?).
- Nothing about Certbot, NGINX, Firewall settings, and etc.
- Hopefully someone can suggest what is missing here with some hints so I can add it?
2018-09-23 13:14:15 +00:00
## Fedora
1. Upgrade your packages:
2018-09-23 13:14:15 +00:00
```
dnf upgrade
```
2. Add a user with sudoers group access:
2018-09-23 13:14:15 +00:00
```
useradd my-peertube-user
passwd my-peertube-user
usermod my-peertube-user -a -G wheel # Add my-peertube-user to sudoers
su my-peertube-user
```
2021-01-11 09:09:24 +00:00
3. (Optional) Install certbot (choose instructions for your distribution):
2018-09-23 13:14:15 +00:00
[https://certbot.eff.org/all-instructions](https://certbot.eff.org/all-instructions)
4. Install NodeJS 18.x:
2024-04-16 07:39:49 +00:00
[https://nodejs.org/en/download/package-manager/all#centos-fedora-and-red-hat-enterprise-linux](https://nodejs.org/en/download/package-manager/all#centos-fedora-and-red-hat-enterprise-linux)
2020-08-11 14:21:29 +00:00
5. Install yarn:
2018-09-23 13:14:15 +00:00
[https://yarnpkg.com/en/docs/install](https://yarnpkg.com/en/docs/install)
6. Enable [RPM Fusion](https://rpmfusion.org) for Fedora (available for x86, x86_64, armhfp)
2018-09-23 13:14:15 +00:00
```
sudo dnf install https://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm
```
This is necessary because `ffmpeg` is not in the Fedora repos.
7. Run:
2018-09-23 13:14:15 +00:00
```
sudo dnf install nginx ffmpeg postgresql-server postgresql-contrib openssl gcc-c++ make redis git vim
2020-08-11 14:21:29 +00:00
ffmpeg -version # Should be >= 4.1
2018-09-23 13:14:15 +00:00
g++ -v # Should be >= 5.x
2023-02-28 10:45:57 +00:00
redis-server --version # Should be >= 6.x
2018-09-23 13:14:15 +00:00
```
8. Configure nginx
```
sudo mkdir /etc/nginx/sites-available
sudo mkdir /etc/nginx/sites-enabled
sudo ln -s /etc/nginx/sites-enabled/peertube /etc/nginx/conf.d/peertube.conf
```
9. Post-installation
2018-09-23 13:14:15 +00:00
_from [PostgreSQL documentation](https://www.postgresql.org/download/linux/redhat/):_
> Due to policies for Red Hat family distributions, the PostgreSQL installation will not be enabled for automatic start or have the database initialized automatically.
2018-09-23 13:14:15 +00:00
```
# PostgreSQL
sudo PGSETUP_INITDB_OPTIONS='--auth-host=md5' postgresql-setup --initdb --unit postgresql
2018-09-23 13:14:15 +00:00
sudo systemctl enable postgresql.service
sudo systemctl start postgresql.service
# Nginx
sudo systemctl enable nginx.service
sudo systemctl start nginx.service
# Redis
sudo systemctl enable redis.service
sudo systemctl start redis.service
```
10. Firewall
2018-09-23 13:14:15 +00:00
By default, you cannot access your server via public IP. To do so, you must configure firewall:
- Ports used by peertube dev setup:
2018-09-23 13:14:15 +00:00
```
sudo firewall-cmd --permanent --zone=public --add-port=3000/tcp
sudo firewall-cmd --permanent --zone=public --add-port=9000/tcp
```
- Optional
```
sudo firewall-cmd --permanent --zone=public --add-service=http
sudo firewall-cmd --permanent --zone=public --add-service=https
```
- Reload firewall
```
sudo firewall-cmd --reload
```
11. Configure max ports
This is necessary if you are running dev setup, otherwise you will have errors with `nodemon`
```
echo fs.inotify.max_user_watches=582222 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
```
[More info](https://stackoverflow.com/questions/34662574/node-js-getting-error-nodemon-internal-watch-failed-watch-enospc#34664097)
## Red Hat Enterprise Linux 8
1. Register system as root user to Red Hat Subscription Management (create a free Red Hat account if you don't have one yet).
```
# subscription-manager register --username <username> --password <password> --auto-attach
# dnf upgrade
# reboot
```
2. Install Node.JS
```
sudo dnf module install nodejs:18
```
3. Install Yarn
```
curl --silent --location https://dl.yarnpkg.com/rpm/yarn.repo | sudo tee /etc/yum.repos.d/yarn.repo
sudo dnf install yarn
```
4. Install FFmpeg
```
sudo subscription-manager repos --enable "codeready-builder-for-rhel-8-$(arch)-rpms"
sudo dnf install --nogpgcheck https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
sudo dnf install --nogpgcheck https://mirrors.rpmfusion.org/free/el/rpmfusion-free-release-8.noarch.rpm
sudo dnf upgrade
sudo dnf install ffmpeg
```
5. Run:
```
sudo dnf install nginx postgresql postgresql-server postgresql-contrib openssl gcc-c++ make wget redis git
```
6. You'll need a symlink for python3 to python for youtube-dl to work
```
2021-10-25 08:22:55 +00:00
sudo alternatives --set python3 /usr/bin/python
```
7. Initialize the PostgreSQL database:
```
sudo PGSETUP_INITDB_OPTIONS='--auth-host=md5' postgresql-setup --initdb --unit postgresql
```
Now that dependencies are installed, before running PeerTube you should enable and start PostgreSQL and Redis:
```
sudo systemctl enable --now redis
sudo systemctl enable --now postgresql
```
If you are running the production guide, you also need to slightly pre-configure nginx, because nginx is packaged differently in the Red Hat family distributions:
8. Configure nginx
```
sudo mkdir /etc/nginx/sites-available
sudo mkdir /etc/nginx/sites-enabled
sudo ln -s /etc/nginx/sites-enabled/peertube /etc/nginx/conf.d/peertube.conf
sudo systemctl enable --now nginx
```
9. Prepare directory
To add the 'peertube' user, you first have to create the 'www' folder and once the 'peertube' user is added, you have to set the access permissions.
```
sudo mkdir /var/www
sudo useradd -m -d /var/www/peertube -s /bin/bash -p peertube peertube
sudo passwd peertube
sudo chmod 755 /var/www/peertube/
```
10. Firewall
By default, you cannot access your server via public IP. To do so, you must configure firewall:
- Ports used by peertube dev setup:
```
sudo firewall-cmd --permanent --zone=public --add-port=3000/tcp
sudo firewall-cmd --permanent --zone=public --add-port=9000/tcp
```
- Optional
```
2018-09-23 13:14:15 +00:00
sudo firewall-cmd --permanent --zone=public --add-service=http
sudo firewall-cmd --permanent --zone=public --add-service=https
```
- Reload firewall
```
2018-09-23 13:14:15 +00:00
sudo firewall-cmd --reload
```
11. Configure max ports
2020-08-11 14:21:29 +00:00
This is necessary if you are running dev setup, otherwise you will have errors with `nodemon`
2018-09-23 13:14:15 +00:00
```
echo fs.inotify.max_user_watches=582222 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
```
2018-09-23 13:14:15 +00:00
[More info](https://stackoverflow.com/questions/34662574/node-js-getting-error-nodemon-internal-watch-failed-watch-enospc#34664097)
## FreeBSD
On a fresh install of [FreeBSD](https://www.freebsd.org), new system or new jail:
2020-08-11 14:21:29 +00:00
1. bootstrap pkg, initialize db and install peertube's dependencies, always as root (sudo not yet installed):
```
pkg
pkg update
2021-03-25 15:25:14 +00:00
pkg install -y sudo bash wget git python nginx pkgconf postgresql13-server postgresql13-contrib redis openssl node npm yarn ffmpeg unzip
```
2020-08-11 14:21:29 +00:00
2. Allow users in the wheel group (hope you don't forgot to add your user on wheel group!) to use sudo.
```
# visudo
```
Uncomment the line 90
2020-08-11 14:21:29 +00:00
```
%wheel ALL=(ALL) ALL
```
2020-08-11 14:21:29 +00:00
3. Enable nginx, redis, postgresql services and initialize database.
```
sysrc postgresql_enable="YES"
sysrc redis_enable="YES"
sysrc nginx_enable="YES"
```
Initialize database and start services
```
service postgresql initdb
service postgresql start
service redis start
service nginx start
```
## macOS
1. Add the packages:
```sh
brew install bash ffmpeg nginx postgresql openssl gcc make redis git yarn
```
You may need to update your default version of bash.
**How to change your default shell**
```sh
which -a bash # Check where bash is installed
bash --version # You need a version at least as recent as 4.0
sudo vim /etc/shells # Add in this file : /usr/local/bin/bash
chsh -s /usr/local/bin/bash # To set the brew-installed bash as default bash
```
2021-08-26 07:02:22 +00:00
In a new shell, type `bash --version` to assert your changes took effect and
correctly modified your default bash version.
2. Run the services:
```sh
brew services run postgresql
brew services run redis
```
On macOS, the `postgresql` user can be `_postgres` instead of `postgres`.
If `sudo -u postgres createuser -P peertube` gives you an `unknown user: postgres` error, you can try `sudo -u _postgres createuser -U peertube`.
## Gentoo
1. Add this to ``/etc/portage/sets/peertube``:
```
net-libs/nodejs
sys-apps/yarn
media-video/ffmpeg[x264] # Optionally add vorbis,vpx
dev-db/postgresql
dev-db/redis
dev-vcs/git
app-arch/unzip
dev-lang/python
2021-10-13 06:55:40 +00:00
dev-lang/python-exec
www-servers/nginx
# Optional, client for Lets Encrypt:
# app-crypt/certbot
```
2. If you are on a "stable" Gentoo you need to accept the testing keyword ~amd64 yarn:
```
mkdir -p /etc/portage/package.keywords
cat << EOF >> /etc/portage/package.keywords/peertube
# required by yarn (argument) for PeerTube
sys-apps/yarn ~amd64
EOF
```
3. Compile the peertube set:
```
emerge -a @peertube
```
4. Initialize the PostgreSQL database if you just merged it:
```
emerge --config postgresql
```
5. (For OpenRC) Enable and then start the services (replace with the correct PostgreSQL slot):
```
rc-update add redis
rc-update add postgresql-11
rc-service redis start
rc-service postgresql-11 start
```
2020-08-11 14:21:29 +00:00
2021-09-27 07:18:05 +00:00
6. Create Python version symlink for youtube-dl:
```
2021-10-13 06:55:40 +00:00
emerge -1 python-exec
2021-09-27 07:18:05 +00:00
```
## OpenBSD
1. Install Packages:
```
pkg_add sudo bash wget git python nginx pkgconf postgresql-server postgresql-contrib redis openssl
```
2. Install yarn:
```
npm install --global yarn
```
3. Allow users in the wheel group to use sudo
```
visudo
```
Uncomment line #43:
```
%wheel ALL=(ALL) ALL
```
4. Enable services:
```
rcctl enable postgresql redis nginx
```
2018-01-12 17:55:45 +00:00
## Other distributions
2018-01-12 17:07:41 +00:00
Feel free to update this file in a pull request!