peertube/support/doc/dependencies.md

# Dependencies

:warning: **Warning**: dependencies guide is maintained by the community. Some parts may be outdated! :warning:

Main dependencies version supported by PeerTube:

 * `node` >=14.x
 * `yarn` >=1.x
 * `postgres` >=10.x
 * `redis-server` >=6.x
 * `ffmpeg` >=4.3


_note_: only **LTS** versions of external dependencies are supported. If no LTS version matching the version constraint is available, only **release** versions are supported.

<!-- START doctoc generated TOC please keep comment here to allow auto update -->
<!-- DON'T EDIT THIS SECTION, INSTEAD RE-RUN doctoc TO UPDATE -->

- [Debian / Ubuntu and derivatives](#debian-ubuntu-and-derivatives)
- [Arch Linux](#arch-linux)
- [CentOS 7](#centos-7)
- [Centos 8](#centos-8)
- [Rocky Linux 8.4](#rocky-linux-84)
- [Fedora](#fedora)
- [Red Hat Enterprise Linux 8](#red-hat-enterprise-linux-8)
- [FreeBSD](#freebsd)
- [macOS](#macos)
- [Gentoo](#gentoo)
- [OpenBSD](#openbsd)
- [Other distributions](#other-distributions)

<!-- END doctoc generated TOC please keep comment here to allow auto update -->

## Debian / Ubuntu and derivatives

1. On a fresh Debian/Ubuntu, as root user, install basic utility programs needed for the installation

```
# apt-get install curl sudo unzip vim
```

2. It would be wise to disable root access and to continue this tutorial with a user with sudoers group access. You can see a guide for how to do this in Debian/Ubuntu [here](https://www.digitalocean.com/community/tutorials/how-to-add-and-delete-users-on-ubuntu-20-04).

3. Install NodeJS 16.x:
[https://nodejs.org/en/download/package-manager/#debian-and-ubuntu-based-linux-distributions](https://nodejs.org/en/download/package-manager/#debian-and-ubuntu-based-linux-distributions)
4. Install yarn, and be sure to have [a recent version](https://github.com/yarnpkg/yarn/releases/latest):
[https://yarnpkg.com/en/docs/install#linux-tab](https://yarnpkg.com/en/docs/install#linux-tab)

5. Install Python:

On Ubuntu <= bionic (18.04 LTS) or Debian <= Buster:

```
sudo apt update
sudo apt install python-dev
python --version # Should be >= 2.x or >= 3.x
```

On Ubuntu >= focal (20.04 LTS) or Debian >= Bullseye:

```
sudo apt update
sudo apt install python3-dev python-is-python3 # python-is-python2 should also work
python --version # Should be >= 2.x or >= 3.x
```

6. Install common dependencies:

```
sudo apt update
sudo apt install certbot nginx ffmpeg postgresql postgresql-contrib openssl g++ make redis-server git cron wget
ffmpeg -version # Should be >= 4.1
g++ -v # Should be >= 5.x
redis-server --version # Should be >= 6.x
```

Now that dependencies are installed, before running PeerTube you should start PostgreSQL and Redis:

```
sudo systemctl start redis postgresql
```

## Arch Linux

1. Run:

```
sudo pacman -S nodejs-lts-fermium yarn ffmpeg postgresql openssl redis git wget unzip python base-devel npm nginx
```

Now that dependencies are installed, before running PeerTube you should start PostgreSQL and Redis:

```
sudo systemctl start redis postgresql
```

## CentOS 7

1. Install NodeJS 16.x:
[https://nodejs.org/en/download/package-manager/#enterprise-linux-and-fedora](https://nodejs.org/en/download/package-manager/#enterprise-linux-and-fedora)

2. Install yarn:
[https://yarnpkg.com/en/docs/install](https://yarnpkg.com/en/docs/install)

3. Install or compile ffmpeg:

* Install - [https://linoxide.com/linux-how-to/install-ffmpeg-centos-7/](https://linoxide.com/linux-how-to/install-ffmpeg-centos-7/)
* Compile - [https://gist.github.com/mustafaturan/7053900#file-latest-ffmpeg-centos6-sh](https://gist.github.com/mustafaturan/7053900#file-latest-ffmpeg-centos6-sh)

4. Install Packages:

```
sudo yum update
sudo yum install epel-release centos-release-scl
sudo yum update
sudo yum install nginx postgresql postgresql-server postgresql-contrib openssl gcc-c++ make wget redis git devtoolset-7
```

5. You need to use a more up to date version of G++ in order to run the yarn install command, hence the installation of devtoolset-7.

```
sudo scl enable devtoolset-7 bash
```

Later when you invoke any node command, please prefix them with `CC=/opt/rh/devtoolset-7/root/usr/bin/gcc CXX=/opt/rh/devtoolset-7/root/usr/bin/g++`, such as with:

```
sudo -H -u peertube CC=/opt/rh/devtoolset-7/root/usr/bin/gcc CXX=/opt/rh/devtoolset-7/root/usr/bin/g++ yarn install --production --pure-lockfile
```

6. Initialize the PostgreSQL database:

```
sudo PGSETUP_INITDB_OPTIONS='--auth-host=md5' postgresql-setup --initdb --unit postgresql
```

Now that dependencies are installed, before running PeerTube you should enable and start PostgreSQL and Redis:

```
sudo systemctl enable --now redis
sudo systemctl enable --now postgresql
```

## Centos 8

1. Install NodeJS 16.x:
[https://nodejs.org/en/download/package-manager/#enterprise-linux-and-fedora](https://nodejs.org/en/download/package-manager/#enterprise-linux-and-fedora)

2. Install yarn:
[https://yarnpkg.com/en/docs/install](https://yarnpkg.com/en/docs/install)

3. Install or compile ffmpeg:

```
sudo dnf install epel-release dnf-utils
sudo yum-config-manager --set-enabled powertools
sudo yum-config-manager --add-repo=https://negativo17.org/repos/epel-multimedia.repo
sudo dnf install ffmpeg
```

4. Install packages:

```
sudo dnf update
sudo dnf install epel-release
sudo dnf update
sudo dnf install nginx postgresql postgresql-server postgresql-contrib openssl gcc-c++ make wget redis git unzip
```

5. You'll need a symlink for python3 to python for youtube-dl to work

```
sudo ln -s /usr/bin/python3 /usr/bin/python
```

6. Initialize the PostgreSQL database:

```
sudo PGSETUP_INITDB_OPTIONS='--auth-host=md5' postgresql-setup --initdb --unit postgresql
```

Now that dependencies are installed, before running PeerTube you should enable and start PostgreSQL and Redis:

```
sudo systemctl enable --now redis
sudo systemctl enable --now postgresql
```

## Rocky Linux 8.4

1. Pull the latest updates:
```
sudo dnf update -y
```

2. Install NodeJS 16.x:
```
sudo dnf module install -y nodejs:16
```

3. Install yarn:
```
sudo npm install --global yarn
```

4. Install or compile ffmpeg (if you want to compile... enjoy):
```
sudo dnf install -y epel-release
sudo dnf --enablerepo=powertools install -y SDL2 SDL2-devel
sudo dnf install -y --nogpgcheck https://download1.rpmfusion.org/free/el/rpmfusion-free-release-8.noarch.rpm https://download1.rpmfusion.org/nonfree/el/rpmfusion-nonfree-release-8.noarch.rpm
sudo dnf install -y ffmpeg
sudo dnf update -y
```

5. Install PostgreSQL and Python3 and other stuff:
```
sudo dnf install -y nginx postgresql postgresql-server postgresql-contrib openssl gcc-c++ make wget redis git python3
sudo ln -s /usr/bin/python3 /usr/bin/python
sudo PGSETUP_INITDB_OPTIONS='--auth-host=md5' postgresql-setup --initdb --unit postgresql
sudo systemctl enable --now redis
sudo systemctl enable --now postgresql
```

6. Configure the peertube user:
```
sudo useradd -m -d /var/www/peertube -s /bin/bash -p peertube peertube
```

7. Unknown missing steps:
- Steps missing here... these were adapted from the CentOS 8 steps which abruptly ended.
- /var/www/peertube does not exist yet (expected? done in future steps? documentation?).
- Nothing about Certbot, NGINX, Firewall settings, and etc.
- Hopefully someone can suggest what is missing here with some hints so I can add it?

## Fedora

1. Upgrade your packages:

```
dnf upgrade
```

2. Add a user with sudoers group access:

```
useradd my-peertube-user
passwd my-peertube-user
usermod my-peertube-user -a -G wheel	# Add my-peertube-user to sudoers
su my-peertube-user
```

3. (Optional) Install certbot (choose instructions for your distribution):
[https://certbot.eff.org/all-instructions](https://certbot.eff.org/all-instructions)

4. Install NodeJS 16.x:
[https://nodejs.org/en/download/package-manager/#enterprise-linux-and-fedora](https://nodejs.org/en/download/package-manager/#enterprise-linux-and-fedora)

5. Install yarn:
[https://yarnpkg.com/en/docs/install](https://yarnpkg.com/en/docs/install)

6. Enable [RPM Fusion](https://rpmfusion.org) for Fedora (available for x86, x86_64, armhfp)

```
sudo dnf install https://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm
```
This is necessary because `ffmpeg` is not in the Fedora repos.

7. Run:

```
sudo dnf install nginx ffmpeg postgresql-server postgresql-contrib openssl gcc-c++ make redis git vim
ffmpeg -version # Should be >= 4.1
g++ -v # Should be >= 5.x
redis-server --version # Should be >= 6.x
```

8. Configure nginx

```
sudo mkdir /etc/nginx/sites-available
sudo mkdir /etc/nginx/sites-enabled
sudo ln -s /etc/nginx/sites-enabled/peertube /etc/nginx/conf.d/peertube.conf
```

9. Post-installation

_from [PostgreSQL documentation](https://www.postgresql.org/download/linux/redhat/):_
> Due to policies for Red Hat family distributions, the PostgreSQL installation will not be enabled for automatic start or have the database initialized automatically.

```
# PostgreSQL
sudo PGSETUP_INITDB_OPTIONS='--auth-host=md5' postgresql-setup --initdb --unit postgresql
sudo systemctl enable postgresql.service
sudo systemctl start postgresql.service
# Nginx
sudo systemctl enable nginx.service
sudo systemctl start nginx.service
# Redis
sudo systemctl enable redis.service
sudo systemctl start redis.service
```

10. Firewall

By default, you cannot access your server via public IP. To do so, you must configure firewall:

-  Ports used by peertube dev setup:
```
sudo firewall-cmd --permanent --zone=public --add-port=3000/tcp
sudo firewall-cmd --permanent --zone=public --add-port=9000/tcp
```
- Optional

```
sudo firewall-cmd --permanent --zone=public --add-service=http
sudo firewall-cmd --permanent --zone=public --add-service=https
```

- Reload firewall

```
sudo firewall-cmd --reload
```

11. Configure max ports

This is necessary if you are running dev setup, otherwise you will have errors with `nodemon`

```
echo fs.inotify.max_user_watches=582222 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
```

[More info](https://stackoverflow.com/questions/34662574/node-js-getting-error-nodemon-internal-watch-failed-watch-enospc#34664097)

## Red Hat Enterprise Linux 8

1. Register system as root user to Red Hat Subscription Management (create a free Red Hat account if you don't have one yet).

```
# subscription-manager register --username <username> --password <password> --auto-attach
# dnf upgrade
# reboot
```

2. Install Node.JS

```
sudo dnf module install nodejs:16
```

3. Install Yarn

```
curl --silent --location https://dl.yarnpkg.com/rpm/yarn.repo | sudo tee /etc/yum.repos.d/yarn.repo
sudo dnf install yarn
```

4. Install FFmpeg

```
sudo subscription-manager repos --enable "codeready-builder-for-rhel-8-$(arch)-rpms"
sudo dnf install --nogpgcheck https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
sudo dnf install --nogpgcheck https://mirrors.rpmfusion.org/free/el/rpmfusion-free-release-8.noarch.rpm
sudo dnf upgrade
sudo dnf install ffmpeg
```

5. Run:

```
sudo dnf install nginx postgresql postgresql-server postgresql-contrib openssl gcc-c++ make wget redis git
```

6. You'll need a symlink for python3 to python for youtube-dl to work

```
sudo alternatives --set python3 /usr/bin/python
```

7. Initialize the PostgreSQL database:

```
sudo PGSETUP_INITDB_OPTIONS='--auth-host=md5' postgresql-setup --initdb --unit postgresql
```

Now that dependencies are installed, before running PeerTube you should enable and start PostgreSQL and Redis:

```
sudo systemctl enable --now redis
sudo systemctl enable --now postgresql
```

If you are running the production guide, you also need to slightly pre-configure nginx, because nginx is packaged differently in the Red Hat family distributions:

8. Configure nginx

```
sudo mkdir /etc/nginx/sites-available
sudo mkdir /etc/nginx/sites-enabled
sudo ln -s /etc/nginx/sites-enabled/peertube /etc/nginx/conf.d/peertube.conf
sudo systemctl enable --now nginx
```

9. Prepare directory

To add the 'peertube' user, you first have to create the 'www' folder and once the 'peertube' user is added, you have to set the access permissions.

```
sudo mkdir /var/www

sudo useradd -m -d /var/www/peertube -s /bin/bash -p peertube peertube
sudo passwd peertube

sudo chmod 755 /var/www/peertube/
```

10. Firewall

By default, you cannot access your server via public IP. To do so, you must configure firewall:

-  Ports used by peertube dev setup:
```
sudo firewall-cmd --permanent --zone=public --add-port=3000/tcp
sudo firewall-cmd --permanent --zone=public --add-port=9000/tcp
```
- Optional

```
sudo firewall-cmd --permanent --zone=public --add-service=http
sudo firewall-cmd --permanent --zone=public --add-service=https
```

- Reload firewall

```
sudo firewall-cmd --reload
```

11. Configure max ports

This is necessary if you are running dev setup, otherwise you will have errors with `nodemon`

```
echo fs.inotify.max_user_watches=582222 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
```

[More info](https://stackoverflow.com/questions/34662574/node-js-getting-error-nodemon-internal-watch-failed-watch-enospc#34664097)


## FreeBSD

On a fresh install of [FreeBSD](https://www.freebsd.org), new system or new jail:

1. bootstrap pkg, initialize db and install peertube's dependencies, always as root (sudo not yet installed):

```
pkg
pkg update
pkg install -y sudo bash wget git python nginx pkgconf postgresql13-server postgresql13-contrib redis openssl node npm yarn ffmpeg unzip
```

2. Allow users in the wheel group (hope you don't forgot to add your user on wheel group!) to use sudo.

```
# visudo
```

Uncomment the line 90

```
%wheel ALL=(ALL) ALL
```

3. Enable nginx, redis, postgresql services and initialize database.

```
sysrc postgresql_enable="YES"
sysrc redis_enable="YES"
sysrc nginx_enable="YES"
```

Initialize database and start services

```
service postgresql initdb
service postgresql start
service redis start
service nginx start
```

## macOS

1. Add the packages:

```sh
brew install bash ffmpeg nginx postgresql openssl gcc make redis git yarn
```

You may need to update your default version of bash.

**How to change your default shell**

```sh
which -a bash # Check where bash is installed
bash --version # You need a version at least as recent as 4.0
sudo vim /etc/shells # Add in this file : /usr/local/bin/bash
chsh -s /usr/local/bin/bash # To set the brew-installed bash as default bash
```

In a new shell, type `bash --version` to assert your changes took effect and
correctly modified your default bash version.

2. Run the services:

```sh
brew services run postgresql
brew services run redis
```

On macOS, the `postgresql` user can be `_postgres` instead of `postgres`.
If `sudo -u postgres createuser -P peertube` gives you an `unknown user: postgres` error, you can try `sudo -u _postgres createuser -U peertube`.

## Gentoo

1. Add this to ``/etc/portage/sets/peertube``:

```
net-libs/nodejs
sys-apps/yarn
media-video/ffmpeg[x264] # Optionally add vorbis,vpx
dev-db/postgresql
dev-db/redis
dev-vcs/git
app-arch/unzip
dev-lang/python
dev-lang/python-exec
www-servers/nginx

# Optional, client for Let’s Encrypt:
# app-crypt/certbot
```

2. If you are on a "stable" Gentoo you need to accept the testing keyword ~amd64 yarn:

```
mkdir -p /etc/portage/package.keywords
cat << EOF >> /etc/portage/package.keywords/peertube
# required by yarn (argument) for PeerTube
sys-apps/yarn ~amd64
EOF
```

3. Compile the peertube set:

```
emerge -a @peertube
```

4. Initialize the PostgreSQL database if you just merged it:

```
emerge --config postgresql
```

5. (For OpenRC) Enable and then start the services (replace with the correct PostgreSQL slot):

```
rc-update add redis
rc-update add postgresql-11
rc-service redis start
rc-service postgresql-11 start
```

6. Create Python version symlink for youtube-dl:

```
emerge -1 python-exec
```

## OpenBSD

1. Install Packages:

```
pkg_add sudo bash wget git python nginx pkgconf postgresql-server postgresql-contrib redis openssl
```

2. Install yarn:

```
npm install --global yarn
```

3. Allow users in the wheel group to use sudo

```
visudo
```
Uncomment line #43:

```
%wheel ALL=(ALL) ALL
```

4. Enable services:

```
rcctl enable postgresql redis nginx
```

## Other distributions

Feel free to update this file in a pull request!