*SVN* * Fix cap shell to properly recognize sudo prompt [Mark Imbriaco, barnaby, Jamis Buck] * Git SCM module [Garry Dolley, Geoffrey Grosenbach, Scott Chacon] * Use the --password switch for subversion by default, but add :scm_prefer_prompt variable (defaults to false) [Jamis Buck] *2.0.100 (2.1 Preview 1)* September 1, 2007 * capify-generated Capfile will autoload all recipes from vendor/plugins/*/recipes/*.rb [Graeme Mathieson] * Use sudo -p switch to set sudo password prompt to something predictable [Mike Bailey] * Allow independent configurations to require the same recipe file [Jamis Buck] * Set :shell to false to run a command without wrapping it in "sh -c" [Jamis Buck] * Don't request a pty by default [Jamis Buck] * Add a "match" remote dependency method [Adam Greene] * Allow auth-caching of subversion credentials to be enabled via :scm_auth_cache [tsmith] * Don't let a task trigger itself when used as the source for an "on" hook [Jamis Buck] * Avoid using the --password switch with subversion for security purposes [sentinel] * Add version_dir, current_dir, and shared_dir variables for naming the directories used in deployment [drinkingbird] * Use Windows-safe binary reads for reading file contents [Ladislav Martincik] * Add Accurev SCM support [Doug Barth] * Use the :runner variable to determine who to sudo as for deploy:restart [Graham Ashton] * Add Namespaces#top to always return a reference to the topmost namespace [Jamis Buck] * Change the "-h" output so that it does not say that "-q" is the default [Jamis Buck] *2.0.0* July 21, 2007 * Make the "no matching servers" error more sane [halorgium] * Make sure the invoke task gives a sane error when the COMMAND value is omitted [halorgium] * Make sure variables are conditionally set in the deploy recipes, so as not to clobber values set elsewhere [Jamis Buck] * Fix "input stream is empty" errors from HighLine on prompt [Jamis Buck] * Added "synchronous_connect" setting to try and work around SFTP hangs for certain users [Jamis Buck] * Auto-require the SSH shell service, to avoid race conditions [Jamis Buck] * Add a millisecond sleep in upload to reduce CPU impact [Jamis Buck] * Allow the logger to be set via Configuration#logger= [Jamis Buck] * Allow $CAPISTRANO:HOST$ to be used in filenames to the put command [Jamis Buck] * Allow execute_on_servers to be called without a current task again [Jamis Buck] * Put $stdout in sync mode, so that Net::SSH prompts are displayed [Jamis Buck] * Make sure deploy:check aborts if it fails [Jamis Buck] * Spelling corrections in docs [Tim Carey-Smith, Giles Bowkett] *1.99.3 (2.0 Preview 4)* June 28, 2007 * Don't break task descriptions on a period that appears in the middle of a sentence [Jamis Buck] * Added support for :on_error => :continue in task definitions, allowing tasks to effectively ignore connection and execution errors that occur as they run [Rob Holland] * Use correct parameters for Logger constructor in the SCM and Strategy base initializers [Jamis Buck] * Set LC_ALL=C before querying the revision, to make sure the output is in a predictable locale and can be parsed predictably [via Leandro Nunes dos Santos] * Add :copy_remote_dir variable for the :copy strategy, to indicate where the archive should be copied to on the remote servers [Jamis Buck] * Make the awk use in the dependencies code work with POSIX awk [mcornick] * Make variable accesses thread safe [via Adrian Danieli] * Make user input for yes/no prompts work correctly in the Mercurial module [Matthew Elder] * Use single quotes to escape semicolon in find command, instead of a backslash [via michael.italia@gmail.com] * Better quoting of reserved characters in commands [Jamis Buck] * Make sure Net::SSH versions prior to 1.1.0 still work [Jamis Buck] * Allow the :hosts and :roles keys to accept lambdas, which will be evaluated lazily to allow runtime selection of hosts and roles in tasks [Jamis Buck] * Use `which' to test whether a command exists in the remote path, instead of `test -p' [Jamis Buck] * Make sure the connection factory is established synchronously, to avoid multiple gateway instances being spawned [Jamis Buck] * Make sure symlink and finalize_update tasks reference the most recent release when called by themselves [Jamis Buck] *1.99.2 (2.0 Preview 3)* June 15, 2007 * CVS SCM module [Brian Phillips] * Fix typo in Perforce SCM module [Chris Bailey] * ssh_options < server options when connecting [Jamis Buck] * Logger defaults to $stderr instead of STDERR [lhartley] * Use cp -RPp instead of -a in the remote cache strategy * Make the UploadError exception include an array of the hosts that failed [rob@inversepath.com] * Allow "empty" roles to be declared [Jamis Buck] * Mercurial SCM module [Tobias Luetke, Matthew Elder] * Invoke all commands via sh (customizable via :default_shell) [Jamis Buck] * Make sure all directories exist on each deploy which are necessary for subsequent commands to succeed, since some SCM's won't save empty directories [Matthew Elder] * Add :default_environment variable, which is applied to every command *1.99.1 (2.0 Preview 2)* May 10, 2007 * Fix some documentation typos [eventualbuddha] * Don't retry failed connections if an explicit auth_methods list is given [Chris Farms] * Added support for load and exit callbacks, which get invoked when all recipes have been loaded and when all requested tasks have been executed [Jamis Buck] * Added support for start and finish callbacks, which get invoked when any task is called via the command-line [Jamis Buck] * Make `capify' understand simple command-line switches [Jamis Buck] * Make the server definition itself available to SSH channels, rather than just the host name [Jamis Buck] * Identify servers by their complete credentials in logs, rather than simply by hostname [Jamis Buck] * Uniquely identify servers based on hostname, port, and username, instead of merely on hostname [Jamis Buck] * Allow (e.g.) scm_command and local_scm_command to be set in the event of different paths to the scm command on local vs. remote hosts. [Jamis Buck] * Kill the "deploy:app" namespace and move those tasks into deploy, directly. [Jamis Buck] * Make sure 'desc' applies to the next defined task, in any namespace. [Jamis Buck] * Fix shell so that servers for a task are correctly discovered. [Jamis Buck] * Added before(), after(), and on() callback creation methods. [Jamis Buck] * Fix broken check! method for some deployment strategies. [Jamis Buck] * deploy:cold should also run migrations before starting the app [Jamis Buck] * Make the copy strategy check out to a temporary directory [Jamis Buck] *1.99.0 (2.0 Preview 1)* April 24, 2007 * Add `capify' script to make it easier to prepare a project for deployment using cap [Jamis Buck] * Make sure the sudo helper understands the SuSE dialect of the sudo password prompt [Steven Wisener] * Fix synchronization issue with Gateway initialization [Doug Barth] * Added opt-in "compat" and "upgrade" recipes for tasks to aid in the upgrade process to Capistrano 2 [Jamis Buck] * The deployment recipes are now opt-in. Just do 'load "deploy"' in your recipe script. [Jamis Buck] * Added $CAPISTRANO:HOST$ placeholder in commands, which will be replaced with the name of the host on which the command is executing [Jamis Buck] * Added -e switch to explain specific task. Added -X to extend -x. Made -h much briefer. Added -T to list known tasks. [Jamis Buck] * Added namespaces for tasks [Jamis Buck] * Merged the Configuration and Actor classes, performed various other massive refactorings of the code [Jamis Buck] *1.4.1* (February 24, 2007) * Use the no-auth-cache option with subversion so that username/password tokens do not get cached by capistrano usage [jonathan] * Deprecated upper-cased variables [Jamis Buck] * Make sure Actor#get does not close the SFTP channel (so subsequent SFTP operations work) [Dov Murik] * Add :env option to 'run' (and friends) so that you can specify environment variables to be injected into the new process' environment [Mathieu Lajugie] *1.4.0* (February 3, 2007) * Use the auth info for subversion more consistently [Jamis Buck] * Add a "capture" helper, for capturing the stdout of a remote command and returning it as a string [Jamis Buck] * Add a "get" helper, to pull a file from a remote server to the localhost [bmihelac] * Fix gateway to actually increment local_port if a port is in use, so that multiple capistrano instances can run at the same time [Mark Imbriaco] * Refactor the permissions tweaking in update_code to a separate task so that people on shared hosts can override it as necessary [jaw6] * Set umask during the setup task, so that intermediate directories are created with the proper permissions [NeilW] * Removed -c/--caprc switch, since the new load order renders it meaningless (just use -f now) [Mike Bailey] * Make sure the standard recipe loads first, so that .caprc and friends can override what it defines. [Mike Bailey] * Add support for a system-wide capistrano config file [Mike Bailey] * Make cold_deploy call update instead of deploy (to avoid invoking the restart task). * Make the touch command run by update_code set the TZ to UTC, for consistent setting of asset timestamps. [NeilW] * Fix off-by-one bug in show_tasks width-computation [NeilW] *1.3.1* (January 5, 2007) * Fix connection problems when using gateways [Ezra Zygmuntowicz] *1.3.0* (December 23, 2006) * Deprecate rake integration in favor of invoking `cap' directly [Jamis Buck] * Make sure the CVS module references the repository explicitly in cvs_log [weyus@att.net] * Remove trace messages when loading a file [Jamis Buck] * Cleaner error messages for authentication failures and command errors [Jamis Buck] * Added support for ~/.caprc, also -x and -c switches. [Jamis Buck] * Updated migrate action to use db:migrate task in Rails instead of the deprecated migrate task [DHH] * Allow SSH user and port to be encoded in the hostname strings [Ezra Zygmuntowicz] * Fixed that new checkouts were not group-writable [DHH, Jamis Buck] * Fixed that cap setup would use 755 on the deploy_to and shared directory roots instead of 775 [DHH] * Don't run the cleanup task on servers marked no_release [Jamis Buck] * Fix typo in default_io_proc so it correctly checks the stream parameter to see if it is the error stream [Stephen Haberman] * Make sure assets in images, javascripts, and stylesheets are touched after updating the code, to ensure the asset timestamping feature of rails works correctly [Jamis Buck] * Added warning if password is prompted for and termios is not installed [John Labovitz] * Added :as option to sudo, so you can specify who the command is executed as [Mark Imbriaco] *1.2.0* (September 14, 2006) * Add experimental 'shell' task [Jamis Buck] * Display file for external configurations, rather than inspected proc. [Jamis Buck] * Connect to multiple servers in parallel, rather than serially. [Jamis Buck] * Add SCM module for Mercurial (closes #4150) [Matthew Elder] * Remove unused line in SCM::Base (closes #5619) [chris@seagul.co.uk] * More efficient "svn log" usage (closes #5620) [Anatol Pomozov] * Better support for key passphrases in the SVN module (closes #5920) [llasram@gmail.com] * Fix missing default for :local in cvs.rb (closes #3645) [jeremy@hinegardner.org] * Fix awkward spacing in gemspec file (closes #3888) [grant@antiflux.org] * Add support for :sudo variable to specify path to sudo (closes #4578) [timothee.peignier@tryphon.org] * Make previous_release return nil if there are no previous releases (closes #4959) [bdabney@cavoksolutions.com] * Uncache releases list after update_code is called so that newly released dir is included (closes #3766) [Jamis Buck] * Allow the subversion scm to accept HTTPS certificates (closes #4792) [Jamis Buck] * Make sure rollbacks occur within the scope of the task that triggered them [Jamis Buck] * Fixed the default recipe to work with setups that haven't yet gone pids [DHH] * Symlink and setup for shared/pids to tmp/pids [DHH] * Fix some incorrect usage text (closes #4507) [gerry_shaw@yahoo.com] * Added Actor#stream method that makes it easy to create cross-server streams [DHH]. Example: desc "Run a tail on multiple log files at the same time" task :tail_fcgi, :roles => :app do stream "tail -f #{shared_path}/log/fastcgi.crash.log" end * Make update_code and symlink a macro task under the name "update" for easy of deploy to servers that does not run fcgis [DHH] * Changed setup, update_code, rollback_code, and symlink to work on all servers instead of only those in the :app, :web, and :db roles. A server can opt out of being part of the release deployment by setting :no_release => true [DHH] * Added support for :except on task declarations as the opposite of :only [DHH]. Example: role :app, "192.168.0.2" role :file, "192.168.0.3", :no_release => true task :symlink, :except => { :no_release => true } do on_rollback { run "ln -nfs #{previous_release} #{current_path}" } run "ln -nfs #{current_release} #{current_path}" end cap symlink # will not run on 192.168.0.3 * Deprecate the -r/--recipe switch in favor of -f/--file (for more make/rake-like semantics) [Jamis Buck] * Fix gemspec to include a dependency on rake 0.7 [Jamis Buck] * Added respect for ENV["HOSTS"] that'll be used instead of the roles specified in the task definition [DHH]. Example: HOSTS=192.168.0.1 cap setup # one-off setup for that server, doesn't need to be prespecified in the recipes file * Added respect for ENV["ROLES"] that'll be used instead of the roles specified in the task definition [DHH]. Example: task :setup, :roles => [ :app, :web, :db ] # normally this would run every where end ROLES=app cap setup # this will only run for the app role, overwritting the default declaration * Added :hosts option to task definition that allows you to specify cross-cutting tasks [DHH]. Example: task :setup, :hosts => [ "06.example.com", "01.example.com" ] do # this task will happen on 06 and 01 regardless of which roles they belong to end * Fix operator precedence problem in script for touching the revisions.log #3223 [jason.garber@emu.edu] *1.1.0* (March 6th, 2006) * Simplify the generated capistrano.rake file, and make it easier to customize * Use rake-like command-line semantics ("cap deploy", in addition to "cap -a deploy") * Rename to capistrano * Make the generated capistrano.rake file use rake namespaces, and include all default tasks * Look for config/deploy.rb, capfile, and Capfile by default *1.0.1* (February 20th, 2006) * Fix broken switchtower_invoke function in switchtower.rake (missing require statement) *1.0.0* (Feburary 18th, 2006) * Make CVS module's :local value default to "." * Add "invoke" task for executing one-off commands * Make port selection smarter for gateway connections * Add extension mechanism for custom ST operations and third-party task libraries * Make ST rails rake tasks more configurable * Add Actor#current_task and simplify Task#servers * Add Actor#connect! method for working around lazy connection establishing * Make sure IO::TRUNC is specified for Net::SFTP uploads (#3510) * Add branch support to CVS [jeremy@hinegardner.org] (#3596) * Add bazaar-ng SCM module [Damien Merenne] * Add optional :svn_username and :svn_password variables * Allow Proc-valued variables to be set more conveniently (set(:foo) { "bar" }) * Add perforce SCM module [Richard McMahon] * Add bazaar (v1) SCM module [Edd Dumbill] (#3533) * Fix stftime format string used in CVS module to be Windows-compatible (fixes #3383) * Add an better error when a task is run and no servers match the required conditions * Add default spinner and cold_deploy tasks, and spinner_user variable * Changed restart_via variable to (boolean) use_sudo * Only chmod when the revisions.log file is first created * Make UPPERCASE variables work * Added rails_env variable (defaults to production) for use by tasks that employ the RAILS_ENV environment variable * Added Actor.default_io_proc * Set :actor key on SSH channel instances *0.10.0* (January 2nd, 2006) * Handle ssh password prompts like "someone's password:" * Make CLI#echo available as a class method. * Add CLI#with_echo. * Make the default password prompt available as a class method. # Add documentation for the CLI class. * Add a sanity check to make sure the correct versions of Net::SSH and Net::SFTP are installed. * Added a cleanup task to remove unused releases from the deployment directory * Allow password to be reentered on sudo if it was entered incorrectly * Use && as the command separator for the checkouts, so that errors are caught early. * Ping each SSH connection every 1s during command processing so that long-running commands don't cause the connection to timeout. * Add a 0.01s sleep during the command loop so that the CPU doesn't go ballistic while ST is doing its thing. * Add :restart_via variable for specifying whether restart ought to use :sudo (default, use sudo) * Use SFTP for file transfers (if available). * Add an "update_current" task that will do an svn up on the current release * Use the :checkout variable to determine what operation to use for svn checkouts (instead of co, like "export"). * The Rails rake tasks now load ST directly, instead of invoking it via system * Added ssh_options variable to configure the SSH connection parameters #2734 [jerrett@bravenet.com] * Require Net::SSH 1.0.5 *0.9.0* (October 18th, 2005) * Use process reaper instead of custom reap script for restarting * Use -S switch to set variables before reading recipe files #2242 * Have setup.rb create a switchtower.cmd file on Win32 platforms #2402 * Add diff_from_last_deploy to the rails switchtower rakefile template * Add diff_from_last_deploy task (currently only works with subversion) * Add deploy_with_migrations task. * Make the migrate task more customizable. * If no password is given with the -p switch, prompt for password immediately. * Do not install a switchtower stub in the script directory. Assume the switchtower executable is in the path. * Remove trailing newlines from commands to prevent trailing backslash #2141 * Default parameters work correctly with the generator #2218 [Scott Barron] * Attempt to require 'rubygems' explicitly when running the switchtower utility #2134 * Make default tasks work only on app/db/web roles, so that additional roles may be created for boxes with specific needs without needing to (for instance) deploy the app to those boxes * Default the application name to "Application" when using --apply-to * Show the help screen instead of an error when no arguments are given * Make SwitchTower easier to invoke programmatically via SwitchTower::CLI * Specify the revision to release via the :revision variable (defaults to latest revision) * Allow variables to be set via the cli using the -s switch * Log checkouts to a "revisions.log" file * Changed behavior of checkout to use the timestamp as the release name, instead of the revision number * Added CVS module (very very experimental!) * Works with public keys now, for passwordless deployment * Subversion module recognizes the password prompt for HTTP authentication * Preserve +x on scripts when using darcs #1929 [Scott Barron] * When executing multiline commands, use a backslash to escape the newline