moby--moby/docs/reference/commandline/network_create.md

---
title: "network create"
description: "The network create command description and usage"
keywords: "network, create"
---

<!-- This file is maintained within the docker/docker Github
     repository at https://github.com/docker/docker/. Make all
     pull requests against that repo. If you see this file in
     another repository, consider it read-only there, as it will
     periodically be overwritten by the definitive file. Pull
     requests which include edits to this file in other repositories
     will be rejected.
-->

# network create

```markdown
Usage:	docker network create [OPTIONS] NETWORK

Create a network

Options:
      --aux-address value    Auxiliary IPv4 or IPv6 addresses used by Network
                             driver (default map[])
  -d, --driver string        Driver to manage the Network (default "bridge")
      --gateway value        IPv4 or IPv6 Gateway for the master subnet (default [])
      --help                 Print usage
      --internal             Restrict external access to the network
      --ip-range value       Allocate container ip from a sub-range (default [])
      --ipam-driver string   IP Address Management Driver (default "default")
      --ipam-opt value       Set IPAM driver specific options (default map[])
      --ipv6                 Enable IPv6 networking
      --label value          Set metadata on a network (default [])
  -o, --opt value            Set driver specific options (default map[])
      --subnet value         Subnet in CIDR format that represents a
                             network segment (default [])
```

Creates a new network. The `DRIVER` accepts `bridge` or `overlay` which are the
built-in network drivers. If you have installed a third party or your own custom
network driver you can specify that `DRIVER` here also. If you don't specify the
`--driver` option, the command automatically creates a `bridge` network for you.
When you install Docker Engine it creates a `bridge` network automatically. This
network corresponds to the `docker0` bridge that Engine has traditionally relied
on. When you launch a new container with  `docker run` it automatically connects to
this bridge network. You cannot remove this default bridge network, but you can
create new ones using the `network create` command.

```bash
$ docker network create -d bridge my-bridge-network
```

Bridge networks are isolated networks on a single Engine installation. If you
want to create a network that spans multiple Docker hosts each running an
Engine, you must create an `overlay` network. Unlike `bridge` networks, overlay
networks require some pre-existing conditions before you can create one. These
conditions are:

* Access to a key-value store. Engine supports Consul, Etcd, and ZooKeeper (Distributed store) key-value stores.
* A cluster of hosts with connectivity to the key-value store.
* A properly configured Engine `daemon` on each host in the cluster.

The `dockerd` options that support the `overlay` network are:

* `--cluster-store`
* `--cluster-store-opt`
* `--cluster-advertise`

To read more about these options and how to configure them, see ["*Get started
with multi-host network*"](https://docs.docker.com/engine/userguide/networking/get-started-overlay).

While not required, it is a good idea to install Docker Swarm to
manage the cluster that makes up your network. Swarm provides sophisticated
discovery and server management tools that can assist your implementation.

Once you have prepared the `overlay` network prerequisites you simply choose a
Docker host in the cluster and issue the following to create the network:

```bash
$ docker network create -d overlay my-multihost-network
```

Network names must be unique. The Docker daemon attempts to identify naming
conflicts but this is not guaranteed. It is the user's responsibility to avoid
name conflicts.

## Connect containers

When you start a container, use the `--network` flag to connect it to a network.
This example adds the `busybox` container to the `mynet` network:

```bash
$ docker run -itd --network=mynet busybox
```

If you want to add a container to a network after the container is already
running, use the `docker network connect` subcommand.

You can connect multiple containers to the same network. Once connected, the
containers can communicate using only another container's IP address or name.
For `overlay` networks or custom plugins that support multi-host connectivity,
containers connected to the same multi-host network but launched from different
Engines can also communicate in this way.

You can disconnect a container from a network using the `docker network
disconnect` command.

## Specifying advanced options

When you create a network, Engine creates a non-overlapping subnetwork for the
network by default. This subnetwork is not a subdivision of an existing
network. It is purely for ip-addressing purposes. You can override this default
and specify subnetwork values directly using the `--subnet` option. On a
`bridge` network you can only create a single subnet:

```bash
$ docker network create --driver=bridge --subnet=192.168.0.0/16 br0
```

Additionally, you also specify the `--gateway` `--ip-range` and `--aux-address`
options.

```bash
$ docker network create \
  --driver=bridge \
  --subnet=172.28.0.0/16 \
  --ip-range=172.28.5.0/24 \
  --gateway=172.28.5.254 \
  br0
```

If you omit the `--gateway` flag the Engine selects one for you from inside a
preferred pool. For `overlay` networks and for network driver plugins that
support it you can create multiple subnetworks.

```bash
$ docker network create -d overlay \
  --subnet=192.168.0.0/16 \
  --subnet=192.170.0.0/16 \
  --gateway=192.168.0.100 \
  --gateway=192.170.0.100 \
  --ip-range=192.168.1.0/24 \
  --aux-address="my-router=192.168.1.5" --aux-address="my-switch=192.168.1.6" \
  --aux-address="my-printer=192.170.1.5" --aux-address="my-nas=192.170.1.6" \
  my-multihost-network
```

Be sure that your subnetworks do not overlap. If they do, the network create
fails and Engine returns an error.

# Bridge driver options

When creating a custom network, the default network driver (i.e. `bridge`) has
additional options that can be passed. The following are those options and the
equivalent docker daemon flags used for docker0 bridge:

| Option                                           | Equivalent  | Description                                           |
|--------------------------------------------------|-------------|-------------------------------------------------------|
| `com.docker.network.bridge.name`                 | -           | bridge name to be used when creating the Linux bridge |
| `com.docker.network.bridge.enable_ip_masquerade` | `--ip-masq` | Enable IP masquerading                                |
| `com.docker.network.bridge.enable_icc`           | `--icc`     | Enable or Disable Inter Container Connectivity        |
| `com.docker.network.bridge.host_binding_ipv4`    | `--ip`      | Default IP when binding container ports               |
| `com.docker.network.driver.mtu`                  | `--mtu`     | Set the containers network MTU                        |

The following arguments can be passed to `docker network create` for any
network driver, again with their approximate equivalents to `docker daemon`.

| Argument     | Equivalent     | Description                                |
|--------------|----------------|--------------------------------------------|
| `--gateway`  | -              | IPv4 or IPv6 Gateway for the master subnet |
| `--ip-range` | `--fixed-cidr` | Allocate IPs from a range                  |
| `--internal` | -              | Restrict external access to the network   |
| `--ipv6`     | `--ipv6`       | Enable IPv6 networking                     |
| `--subnet`   | `--bip`        | Subnet for network                         |

For example, let's use `-o` or `--opt` options to specify an IP address binding
when publishing ports:

```bash
$ docker network create \
    -o "com.docker.network.bridge.host_binding_ipv4"="172.19.0.1" \
    simple-network
```

### Network internal mode

By default, when you connect a container to an `overlay` network, Docker also
connects a bridge network to it to provide external connectivity. If you want
to create an externally isolated `overlay` network, you can specify the
`--internal` option.

## Related information

* [network inspect](network_inspect.md)
* [network connect](network_connect.md)
* [network disconnect](network_disconnect.md)
* [network ls](network_ls.md)
* [network rm](network_rm.md)
* [network prune](network_prune.md)
* [Understand Docker container networks](https://docs.docker.com/engine/userguide/networking/)