moby--moby/daemon/images/service.go

263 lines
9.0 KiB
Go
Raw Normal View History

package images // import "github.com/docker/docker/daemon/images"
import (
"context"
"os"
"runtime"
"github.com/containerd/containerd/content"
"github.com/containerd/containerd/leases"
"github.com/docker/docker/container"
daemonevents "github.com/docker/docker/daemon/events"
"github.com/docker/docker/distribution"
"github.com/docker/docker/distribution/metadata"
"github.com/docker/docker/distribution/xfer"
"github.com/docker/docker/image"
"github.com/docker/docker/layer"
dockerreference "github.com/docker/docker/reference"
"github.com/docker/docker/registry"
"github.com/docker/libtrust"
digest "github.com/opencontainers/go-digest"
"github.com/pkg/errors"
"github.com/sirupsen/logrus"
)
type containerStore interface {
// used by image delete
First(container.StoreFilter) *container.Container
// used by image prune, and image list
List() []*container.Container
// TODO: remove, only used for CommitBuildStep
Get(string) *container.Container
}
// ImageServiceConfig is the configuration used to create a new ImageService
type ImageServiceConfig struct {
ContainerStore containerStore
DistributionMetadataStore metadata.Store
EventsService *daemonevents.Events
ImageStore image.Store
LayerStores map[string]layer.Store
MaxConcurrentDownloads int
MaxConcurrentUploads int
Adding ability to change max download attempts Moby works perfectly when you are in a situation when one has a good and stable internet connection. Operating in area's where internet connectivity is likely to be lost in undetermined intervals, like a satellite connection or 4G/LTE in rural area's, can become a problem when pulling a new image. When connection is lost while image layers are being pulled, Moby will try to reconnect up to 5 times. If this fails, the incompletely downloaded layers are lost will need to be completely downloaded again during the next pull request. This means that we are using more data than we might have to. Pulling a layer multiple times from the start can become costly over a satellite or 4G/LTE connection. As these techniques (especially 4G) quite common in IoT and Moby is used to run Azure IoT Edge devices, I would like to add a settable maximum download attempts. The maximum download attempts is currently set at 5 (distribution/xfer/download.go). I would like to change this constant to a variable that the user can set. The default will still be 5, so nothing will change from the current version unless specified when starting the daemon with the added flag or in the config file. I added a default value of 5 for DefaultMaxDownloadAttempts and a settable max-download-attempts in the daemon config file. It is also added to the config of dockerd so it can be set with a flag when starting the daemon. This value gets stored in the imageService of the daemon when it is initiated and can be passed to the NewLayerDownloadManager as a parameter. It will be stored in the LayerDownloadManager when initiated. This enables us to set the max amount of retries in makeDownoadFunc equal to the max download attempts. I also added some tests that are based on maxConcurrentDownloads/maxConcurrentUploads. You can pull this version and test in a development container. Either create a config `file /etc/docker/daemon.json` with `{"max-download-attempts"=3}``, or use `dockerd --max-download-attempts=3 -D &` to start up the dockerd. Start downloading a container and disconnect from the internet whilst downloading. The result would be that it stops pulling after three attempts. Signed-off-by: Lukas Heeren <lukas-heeren@hotmail.com> Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
2019-06-25 13:26:36 +00:00
MaxDownloadAttempts int
ReferenceStore dockerreference.Store
RegistryService registry.Service
TrustKey libtrust.PrivateKey
ContentStore content.Store
Leases leases.Manager
ContentNamespace string
}
// NewImageService returns a new ImageService from a configuration
func NewImageService(config ImageServiceConfig) *ImageService {
logrus.Debugf("Max Concurrent Downloads: %d", config.MaxConcurrentDownloads)
logrus.Debugf("Max Concurrent Uploads: %d", config.MaxConcurrentUploads)
Adding ability to change max download attempts Moby works perfectly when you are in a situation when one has a good and stable internet connection. Operating in area's where internet connectivity is likely to be lost in undetermined intervals, like a satellite connection or 4G/LTE in rural area's, can become a problem when pulling a new image. When connection is lost while image layers are being pulled, Moby will try to reconnect up to 5 times. If this fails, the incompletely downloaded layers are lost will need to be completely downloaded again during the next pull request. This means that we are using more data than we might have to. Pulling a layer multiple times from the start can become costly over a satellite or 4G/LTE connection. As these techniques (especially 4G) quite common in IoT and Moby is used to run Azure IoT Edge devices, I would like to add a settable maximum download attempts. The maximum download attempts is currently set at 5 (distribution/xfer/download.go). I would like to change this constant to a variable that the user can set. The default will still be 5, so nothing will change from the current version unless specified when starting the daemon with the added flag or in the config file. I added a default value of 5 for DefaultMaxDownloadAttempts and a settable max-download-attempts in the daemon config file. It is also added to the config of dockerd so it can be set with a flag when starting the daemon. This value gets stored in the imageService of the daemon when it is initiated and can be passed to the NewLayerDownloadManager as a parameter. It will be stored in the LayerDownloadManager when initiated. This enables us to set the max amount of retries in makeDownoadFunc equal to the max download attempts. I also added some tests that are based on maxConcurrentDownloads/maxConcurrentUploads. You can pull this version and test in a development container. Either create a config `file /etc/docker/daemon.json` with `{"max-download-attempts"=3}``, or use `dockerd --max-download-attempts=3 -D &` to start up the dockerd. Start downloading a container and disconnect from the internet whilst downloading. The result would be that it stops pulling after three attempts. Signed-off-by: Lukas Heeren <lukas-heeren@hotmail.com> Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
2019-06-25 13:26:36 +00:00
logrus.Debugf("Max Download Attempts: %d", config.MaxDownloadAttempts)
return &ImageService{
containers: config.ContainerStore,
distributionMetadataStore: config.DistributionMetadataStore,
Adding ability to change max download attempts Moby works perfectly when you are in a situation when one has a good and stable internet connection. Operating in area's where internet connectivity is likely to be lost in undetermined intervals, like a satellite connection or 4G/LTE in rural area's, can become a problem when pulling a new image. When connection is lost while image layers are being pulled, Moby will try to reconnect up to 5 times. If this fails, the incompletely downloaded layers are lost will need to be completely downloaded again during the next pull request. This means that we are using more data than we might have to. Pulling a layer multiple times from the start can become costly over a satellite or 4G/LTE connection. As these techniques (especially 4G) quite common in IoT and Moby is used to run Azure IoT Edge devices, I would like to add a settable maximum download attempts. The maximum download attempts is currently set at 5 (distribution/xfer/download.go). I would like to change this constant to a variable that the user can set. The default will still be 5, so nothing will change from the current version unless specified when starting the daemon with the added flag or in the config file. I added a default value of 5 for DefaultMaxDownloadAttempts and a settable max-download-attempts in the daemon config file. It is also added to the config of dockerd so it can be set with a flag when starting the daemon. This value gets stored in the imageService of the daemon when it is initiated and can be passed to the NewLayerDownloadManager as a parameter. It will be stored in the LayerDownloadManager when initiated. This enables us to set the max amount of retries in makeDownoadFunc equal to the max download attempts. I also added some tests that are based on maxConcurrentDownloads/maxConcurrentUploads. You can pull this version and test in a development container. Either create a config `file /etc/docker/daemon.json` with `{"max-download-attempts"=3}``, or use `dockerd --max-download-attempts=3 -D &` to start up the dockerd. Start downloading a container and disconnect from the internet whilst downloading. The result would be that it stops pulling after three attempts. Signed-off-by: Lukas Heeren <lukas-heeren@hotmail.com> Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
2019-06-25 13:26:36 +00:00
downloadManager: xfer.NewLayerDownloadManager(config.LayerStores, config.MaxConcurrentDownloads, xfer.WithMaxDownloadAttempts(config.MaxDownloadAttempts)),
eventsService: config.EventsService,
imageStore: &imageStoreWithLease{Store: config.ImageStore, leases: config.Leases, ns: config.ContentNamespace},
layerStores: config.LayerStores,
referenceStore: config.ReferenceStore,
registryService: config.RegistryService,
trustKey: config.TrustKey,
uploadManager: xfer.NewLayerUploadManager(config.MaxConcurrentUploads),
leases: config.Leases,
content: config.ContentStore,
contentNamespace: config.ContentNamespace,
}
}
// ImageService provides a backend for image management
type ImageService struct {
containers containerStore
distributionMetadataStore metadata.Store
downloadManager *xfer.LayerDownloadManager
eventsService *daemonevents.Events
imageStore image.Store
layerStores map[string]layer.Store // By operating system
pruneRunning int32
referenceStore dockerreference.Store
registryService registry.Service
trustKey libtrust.PrivateKey
uploadManager *xfer.LayerUploadManager
leases leases.Manager
content content.Store
contentNamespace string
}
// DistributionServices provides daemon image storage services
type DistributionServices struct {
DownloadManager distribution.RootFSDownloadManager
V2MetadataService metadata.V2MetadataService
LayerStore layer.Store // TODO: lcow
ImageStore image.Store
ReferenceStore dockerreference.Store
}
// DistributionServices return services controlling daemon image storage
func (i *ImageService) DistributionServices() DistributionServices {
return DistributionServices{
DownloadManager: i.downloadManager,
V2MetadataService: metadata.NewV2MetadataService(i.distributionMetadataStore),
LayerStore: i.layerStores[runtime.GOOS],
ImageStore: i.imageStore,
ReferenceStore: i.referenceStore,
}
}
// CountImages returns the number of images stored by ImageService
// called from info.go
func (i *ImageService) CountImages() int {
return i.imageStore.Len()
}
// Children returns the children image.IDs for a parent image.
// called from list.go to filter containers
// TODO: refactor to expose an ancestry for image.ID?
func (i *ImageService) Children(id image.ID) []image.ID {
return i.imageStore.Children(id)
}
// CreateLayer creates a filesystem layer for a container.
// called from create.go
// TODO: accept an opt struct instead of container?
func (i *ImageService) CreateLayer(container *container.Container, initFunc layer.MountInit) (layer.RWLayer, error) {
var layerID layer.ChainID
if container.ImageID != "" {
img, err := i.imageStore.Get(container.ImageID)
if err != nil {
return nil, err
}
layerID = img.RootFS.ChainID()
}
rwLayerOpts := &layer.CreateRWLayerOpts{
MountLabel: container.MountLabel,
InitFunc: initFunc,
StorageOpt: container.HostConfig.StorageOpt,
}
// Indexing by OS is safe here as validation of OS has already been performed in create() (the only
// caller), and guaranteed non-nil
return i.layerStores[container.OS].CreateRWLayer(container.ID, layerID, rwLayerOpts)
}
// GetLayerByID returns a layer by ID and operating system
// called from daemon.go Daemon.restore(), and Daemon.containerExport()
func (i *ImageService) GetLayerByID(cid string, os string) (layer.RWLayer, error) {
return i.layerStores[os].GetRWLayer(cid)
}
// LayerStoreStatus returns the status for each layer store
// called from info.go
func (i *ImageService) LayerStoreStatus() map[string][][2]string {
result := make(map[string][][2]string)
for os, store := range i.layerStores {
result[os] = store.DriverStatus()
}
return result
}
// GetLayerMountID returns the mount ID for a layer
// called from daemon.go Daemon.Shutdown(), and Daemon.Cleanup() (cleanup is actually continerCleanup)
// TODO: needs to be refactored to Unmount (see callers), or removed and replaced
// with GetLayerByID
func (i *ImageService) GetLayerMountID(cid string, os string) (string, error) {
return i.layerStores[os].GetMountID(cid)
}
// Cleanup resources before the process is shutdown.
// called from daemon.go Daemon.Shutdown()
func (i *ImageService) Cleanup() {
for os, ls := range i.layerStores {
if ls != nil {
if err := ls.Cleanup(); err != nil {
logrus.Errorf("Error during layer Store.Cleanup(): %v %s", err, os)
}
}
}
}
// GraphDriverForOS returns the name of the graph drvier
// moved from Daemon.GraphDriverName, used by:
// - newContainer
// - to report an error in Daemon.Mount(container)
func (i *ImageService) GraphDriverForOS(os string) string {
return i.layerStores[os].DriverName()
}
// ReleaseLayer releases a layer allowing it to be removed
// called from delete.go Daemon.cleanupContainer(), and Daemon.containerExport()
func (i *ImageService) ReleaseLayer(rwlayer layer.RWLayer, containerOS string) error {
metadata, err := i.layerStores[containerOS].ReleaseRWLayer(rwlayer)
layer.LogReleaseMetadata(metadata)
if err != nil && !errors.Is(err, layer.ErrMountDoesNotExist) && !errors.Is(err, os.ErrNotExist) {
return errors.Wrapf(err, "driver %q failed to remove root filesystem",
i.layerStores[containerOS].DriverName())
}
return nil
}
// LayerDiskUsage returns the number of bytes used by layer stores
// called from disk_usage.go
func (i *ImageService) LayerDiskUsage(ctx context.Context) (int64, error) {
var allLayersSize int64
layerRefs := i.getLayerRefs()
for _, ls := range i.layerStores {
allLayers := ls.Map()
for _, l := range allLayers {
select {
case <-ctx.Done():
return allLayersSize, ctx.Err()
default:
size, err := l.DiffSize()
if err == nil {
if _, ok := layerRefs[l.ChainID()]; ok {
allLayersSize += size
}
} else {
logrus.Warnf("failed to get diff size for layer %v", l.ChainID())
}
}
}
}
return allLayersSize, nil
}
func (i *ImageService) getLayerRefs() map[layer.ChainID]int {
tmpImages := i.imageStore.Map()
layerRefs := map[layer.ChainID]int{}
for id, img := range tmpImages {
dgst := digest.Digest(id)
if len(i.referenceStore.References(dgst)) == 0 && len(i.imageStore.Children(id)) != 0 {
continue
}
rootFS := *img.RootFS
rootFS.DiffIDs = nil
for _, id := range img.RootFS.DiffIDs {
rootFS.Append(id)
chid := rootFS.ChainID()
layerRefs[chid]++
}
}
return layerRefs
}
// UpdateConfig values
//
// called from reload.go
func (i *ImageService) UpdateConfig(maxDownloads, maxUploads *int) {
if i.downloadManager != nil && maxDownloads != nil {
i.downloadManager.SetConcurrency(*maxDownloads)
}
if i.uploadManager != nil && maxUploads != nil {
i.uploadManager.SetConcurrency(*maxUploads)
}
}