2021-08-23 13:14:53 +00:00
|
|
|
//go:build linux && cgo && !static_build && journald
|
2015-11-24 16:14:17 +00:00
|
|
|
// +build linux,cgo,!static_build,journald
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
|
2018-02-05 21:05:59 +00:00
|
|
|
package journald // import "github.com/docker/docker/daemon/logger/journald"
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
|
|
|
|
|
// #include <sys/types.h>
|
|
|
|
|
// #include <sys/poll.h>
|
|
|
|
|
// #include <systemd/sd-journal.h>
|
|
|
|
|
// #include <errno.h>
|
|
|
|
|
// #include <stdio.h>
|
|
|
|
|
// #include <stdlib.h>
|
|
|
|
|
// #include <string.h>
|
|
|
|
|
// #include <time.h>
|
|
|
|
|
// #include <unistd.h>
|
|
|
|
|
//
|
Improve logging of long log lines
This change updates how we handle long lines of output from the
container. The previous logic used a bufio reader to read entire lines
of output from the container through an intermediate BytesPipe, and that
allowed the container to cause dockerd to consume an unconstrained
amount of memory as it attempted to collect a whole line of output, by
outputting data without newlines.
To avoid that, we replace the bufio reader with our own buffering scheme
that handles log lines up to 16k in length, breaking up anything longer
than that into multiple chunks. If we can dispense with noting this
detail properly at the end of output, we can switch from using
ReadBytes() to using ReadLine() instead. We add a field ("Partial") to
the log message structure to flag when we pass data to the log driver
that did not end with a newline.
The Line member of Message structures that we pass to log drivers is now
a slice into data which can be overwritten between calls to the log
driver's Log() method, so drivers which batch up Messages before
processing them need to take additional care: we add a function
(logger.CopyMessage()) that can be used to create a deep copy of a
Message structure, and modify the awslogs driver to use it.
We update the jsonfile log driver to append a "\n" to the data that it
logs to disk only when the Partial flag is false (it previously did so
unconditionally), to make its "logs" output correctly reproduce the data
as we received it.
Likewise, we modify the journald log driver to add a data field with
value CONTAINER_PARTIAL_MESSAGE=true to entries when the Partial flag is
true, and update its "logs" reader to refrain from appending a "\n" to
the data that it retrieves if it does not see this field/value pair (it
also previously did this unconditionally).
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2016-05-24 18:12:47 +00:00
|
|
|
//static int get_message(sd_journal *j, const char **msg, size_t *length, int *partial)
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
//{
|
|
|
|
|
// int rc;
|
Improve logging of long log lines
This change updates how we handle long lines of output from the
container. The previous logic used a bufio reader to read entire lines
of output from the container through an intermediate BytesPipe, and that
allowed the container to cause dockerd to consume an unconstrained
amount of memory as it attempted to collect a whole line of output, by
outputting data without newlines.
To avoid that, we replace the bufio reader with our own buffering scheme
that handles log lines up to 16k in length, breaking up anything longer
than that into multiple chunks. If we can dispense with noting this
detail properly at the end of output, we can switch from using
ReadBytes() to using ReadLine() instead. We add a field ("Partial") to
the log message structure to flag when we pass data to the log driver
that did not end with a newline.
The Line member of Message structures that we pass to log drivers is now
a slice into data which can be overwritten between calls to the log
driver's Log() method, so drivers which batch up Messages before
processing them need to take additional care: we add a function
(logger.CopyMessage()) that can be used to create a deep copy of a
Message structure, and modify the awslogs driver to use it.
We update the jsonfile log driver to append a "\n" to the data that it
logs to disk only when the Partial flag is false (it previously did so
unconditionally), to make its "logs" output correctly reproduce the data
as we received it.
Likewise, we modify the journald log driver to add a data field with
value CONTAINER_PARTIAL_MESSAGE=true to entries when the Partial flag is
true, and update its "logs" reader to refrain from appending a "\n" to
the data that it retrieves if it does not see this field/value pair (it
also previously did this unconditionally).
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2016-05-24 18:12:47 +00:00
|
|
|
// size_t plength;
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
// *msg = NULL;
|
|
|
|
|
// *length = 0;
|
Improve logging of long log lines
This change updates how we handle long lines of output from the
container. The previous logic used a bufio reader to read entire lines
of output from the container through an intermediate BytesPipe, and that
allowed the container to cause dockerd to consume an unconstrained
amount of memory as it attempted to collect a whole line of output, by
outputting data without newlines.
To avoid that, we replace the bufio reader with our own buffering scheme
that handles log lines up to 16k in length, breaking up anything longer
than that into multiple chunks. If we can dispense with noting this
detail properly at the end of output, we can switch from using
ReadBytes() to using ReadLine() instead. We add a field ("Partial") to
the log message structure to flag when we pass data to the log driver
that did not end with a newline.
The Line member of Message structures that we pass to log drivers is now
a slice into data which can be overwritten between calls to the log
driver's Log() method, so drivers which batch up Messages before
processing them need to take additional care: we add a function
(logger.CopyMessage()) that can be used to create a deep copy of a
Message structure, and modify the awslogs driver to use it.
We update the jsonfile log driver to append a "\n" to the data that it
logs to disk only when the Partial flag is false (it previously did so
unconditionally), to make its "logs" output correctly reproduce the data
as we received it.
Likewise, we modify the journald log driver to add a data field with
value CONTAINER_PARTIAL_MESSAGE=true to entries when the Partial flag is
true, and update its "logs" reader to refrain from appending a "\n" to
the data that it retrieves if it does not see this field/value pair (it
also previously did this unconditionally).
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2016-05-24 18:12:47 +00:00
|
|
|
// plength = strlen("CONTAINER_PARTIAL_MESSAGE=true");
|
|
|
|
|
// rc = sd_journal_get_data(j, "CONTAINER_PARTIAL_MESSAGE", (const void **) msg, length);
|
|
|
|
|
// *partial = ((rc == 0) && (*length == plength) && (memcmp(*msg, "CONTAINER_PARTIAL_MESSAGE=true", plength) == 0));
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
// rc = sd_journal_get_data(j, "MESSAGE", (const void **) msg, length);
|
|
|
|
|
// if (rc == 0) {
|
|
|
|
|
// if (*length > 8) {
|
|
|
|
|
// (*msg) += 8;
|
|
|
|
|
// *length -= 8;
|
|
|
|
|
// } else {
|
|
|
|
|
// *msg = NULL;
|
|
|
|
|
// *length = 0;
|
|
|
|
|
// rc = -ENOENT;
|
|
|
|
|
// }
|
|
|
|
|
// }
|
|
|
|
|
// return rc;
|
|
|
|
|
//}
|
|
|
|
|
//static int get_priority(sd_journal *j, int *priority)
|
|
|
|
|
//{
|
|
|
|
|
// const void *data;
|
|
|
|
|
// size_t i, length;
|
|
|
|
|
// int rc;
|
|
|
|
|
// *priority = -1;
|
|
|
|
|
// rc = sd_journal_get_data(j, "PRIORITY", &data, &length);
|
|
|
|
|
// if (rc == 0) {
|
|
|
|
|
// if ((length > 9) && (strncmp(data, "PRIORITY=", 9) == 0)) {
|
|
|
|
|
// *priority = 0;
|
|
|
|
|
// for (i = 9; i < length; i++) {
|
|
|
|
|
// *priority = *priority * 10 + ((const char *)data)[i] - '0';
|
|
|
|
|
// }
|
|
|
|
|
// if (length > 9) {
|
|
|
|
|
// rc = 0;
|
|
|
|
|
// }
|
|
|
|
|
// }
|
|
|
|
|
// }
|
|
|
|
|
// return rc;
|
|
|
|
|
//}
|
2016-04-14 19:21:42 +00:00
|
|
|
//static int is_attribute_field(const char *msg, size_t length)
|
|
|
|
|
//{
|
2016-10-15 14:12:15 +00:00
|
|
|
// static const struct known_field {
|
2016-04-14 19:21:42 +00:00
|
|
|
// const char *name;
|
|
|
|
|
// size_t length;
|
|
|
|
|
// } fields[] = {
|
|
|
|
|
// {"MESSAGE", sizeof("MESSAGE") - 1},
|
|
|
|
|
// {"MESSAGE_ID", sizeof("MESSAGE_ID") - 1},
|
|
|
|
|
// {"PRIORITY", sizeof("PRIORITY") - 1},
|
|
|
|
|
// {"CODE_FILE", sizeof("CODE_FILE") - 1},
|
|
|
|
|
// {"CODE_LINE", sizeof("CODE_LINE") - 1},
|
|
|
|
|
// {"CODE_FUNC", sizeof("CODE_FUNC") - 1},
|
|
|
|
|
// {"ERRNO", sizeof("ERRNO") - 1},
|
|
|
|
|
// {"SYSLOG_FACILITY", sizeof("SYSLOG_FACILITY") - 1},
|
|
|
|
|
// {"SYSLOG_IDENTIFIER", sizeof("SYSLOG_IDENTIFIER") - 1},
|
|
|
|
|
// {"SYSLOG_PID", sizeof("SYSLOG_PID") - 1},
|
|
|
|
|
// {"CONTAINER_NAME", sizeof("CONTAINER_NAME") - 1},
|
|
|
|
|
// {"CONTAINER_ID", sizeof("CONTAINER_ID") - 1},
|
|
|
|
|
// {"CONTAINER_ID_FULL", sizeof("CONTAINER_ID_FULL") - 1},
|
|
|
|
|
// {"CONTAINER_TAG", sizeof("CONTAINER_TAG") - 1},
|
|
|
|
|
// };
|
|
|
|
|
// unsigned int i;
|
|
|
|
|
// void *p;
|
|
|
|
|
// if ((length < 1) || (msg[0] == '_') || ((p = memchr(msg, '=', length)) == NULL)) {
|
|
|
|
|
// return -1;
|
|
|
|
|
// }
|
|
|
|
|
// length = ((const char *) p) - msg;
|
|
|
|
|
// for (i = 0; i < sizeof(fields) / sizeof(fields[0]); i++) {
|
|
|
|
|
// if ((fields[i].length == length) && (memcmp(fields[i].name, msg, length) == 0)) {
|
|
|
|
|
// return -1;
|
|
|
|
|
// }
|
|
|
|
|
// }
|
|
|
|
|
// return 0;
|
|
|
|
|
//}
|
|
|
|
|
//static int get_attribute_field(sd_journal *j, const char **msg, size_t *length)
|
|
|
|
|
//{
|
|
|
|
|
// int rc;
|
|
|
|
|
// *msg = NULL;
|
|
|
|
|
// *length = 0;
|
|
|
|
|
// while ((rc = sd_journal_enumerate_data(j, (const void **) msg, length)) > 0) {
|
|
|
|
|
// if (is_attribute_field(*msg, *length) == 0) {
|
|
|
|
|
// break;
|
|
|
|
|
// }
|
|
|
|
|
// rc = -ENOENT;
|
|
|
|
|
// }
|
|
|
|
|
// return rc;
|
|
|
|
|
//}
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
import "C"
|
|
|
|
|
|
|
|
|
|
import (
|
journald/read: simplify/fix followJournal()
TL;DR: simplify the code, fix --follow hanging indefinitely
Do the following to simplify the followJournal() code:
1. Use Go-native select instead of C-native polling.
2. Use Watch{Producer,Consumer}Gone(), eliminating the need
to have journald.closed variable, and an extra goroutine.
3. Use sd_journal_wait(). In the words of its own man page:
> A synchronous alternative for using sd_journal_get_fd(),
> sd_journal_get_events(), sd_journal_get_timeout() and
> sd_journal_process() is sd_journal_wait().
Unfortunately, the logic is still not as simple as it
could be; the reason being, once the container has exited,
journald might still be writing some logs from its internal
buffers onto journal file(s), and there is no way to
figure out whether it's done so we are guaranteed to
read all of it back. This bug can be reproduced with
something like
> $ ID=$(docker run -d busybox seq 1 150000); docker logs --follow $ID
> ...
> 128123
> $
(The last expected output line should be `150000`).
To avoid exiting from followJournal() early, add the
following logic: once the container is gone, keep trying
to drain the journal until there's no new data for at
least `waitTimeout` time period.
Should fix https://github.com/docker/for-linux/issues/575
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
2019-03-12 00:20:56 +00:00
|
|
|
"errors"
|
2016-04-14 19:21:42 +00:00
|
|
|
"strings"
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
"time"
|
|
|
|
|
"unsafe"
|
|
|
|
|
|
2020-02-28 07:52:14 +00:00
|
|
|
"github.com/coreos/go-systemd/v22/journal"
|
2017-07-19 02:01:20 +00:00
|
|
|
"github.com/docker/docker/api/types/backend"
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
"github.com/docker/docker/daemon/logger"
|
2019-03-10 03:39:33 +00:00
|
|
|
"github.com/sirupsen/logrus"
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
)
|
|
|
|
|
|
2021-04-16 14:07:25 +00:00
|
|
|
// CErr converts error code returned from a sd_journal_* function
|
journald/read: simplify/fix followJournal()
TL;DR: simplify the code, fix --follow hanging indefinitely
Do the following to simplify the followJournal() code:
1. Use Go-native select instead of C-native polling.
2. Use Watch{Producer,Consumer}Gone(), eliminating the need
to have journald.closed variable, and an extra goroutine.
3. Use sd_journal_wait(). In the words of its own man page:
> A synchronous alternative for using sd_journal_get_fd(),
> sd_journal_get_events(), sd_journal_get_timeout() and
> sd_journal_process() is sd_journal_wait().
Unfortunately, the logic is still not as simple as it
could be; the reason being, once the container has exited,
journald might still be writing some logs from its internal
buffers onto journal file(s), and there is no way to
figure out whether it's done so we are guaranteed to
read all of it back. This bug can be reproduced with
something like
> $ ID=$(docker run -d busybox seq 1 150000); docker logs --follow $ID
> ...
> 128123
> $
(The last expected output line should be `150000`).
To avoid exiting from followJournal() early, add the
following logic: once the container is gone, keep trying
to drain the journal until there's no new data for at
least `waitTimeout` time period.
Should fix https://github.com/docker/for-linux/issues/575
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
2019-03-12 00:20:56 +00:00
|
|
|
// (which returns -errno) to a string
|
|
|
|
|
func CErr(ret C.int) string {
|
2021-04-16 14:07:25 +00:00
|
|
|
return C.GoString(C.strerror(-ret))
|
journald/read: simplify/fix followJournal()
TL;DR: simplify the code, fix --follow hanging indefinitely
Do the following to simplify the followJournal() code:
1. Use Go-native select instead of C-native polling.
2. Use Watch{Producer,Consumer}Gone(), eliminating the need
to have journald.closed variable, and an extra goroutine.
3. Use sd_journal_wait(). In the words of its own man page:
> A synchronous alternative for using sd_journal_get_fd(),
> sd_journal_get_events(), sd_journal_get_timeout() and
> sd_journal_process() is sd_journal_wait().
Unfortunately, the logic is still not as simple as it
could be; the reason being, once the container has exited,
journald might still be writing some logs from its internal
buffers onto journal file(s), and there is no way to
figure out whether it's done so we are guaranteed to
read all of it back. This bug can be reproduced with
something like
> $ ID=$(docker run -d busybox seq 1 150000); docker logs --follow $ID
> ...
> 128123
> $
(The last expected output line should be `150000`).
To avoid exiting from followJournal() early, add the
following logic: once the container is gone, keep trying
to drain the journal until there's no new data for at
least `waitTimeout` time period.
Should fix https://github.com/docker/for-linux/issues/575
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
2019-03-12 00:20:56 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (s *journald) drainJournal(logWatcher *logger.LogWatcher, j *C.sd_journal, oldCursor *C.char, untilUnixMicro uint64) (*C.char, bool, int) {
|
|
|
|
|
var (
|
|
|
|
|
msg, data, cursor *C.char
|
|
|
|
|
length C.size_t
|
|
|
|
|
stamp C.uint64_t
|
|
|
|
|
priority, partial C.int
|
|
|
|
|
done bool
|
|
|
|
|
shown int
|
|
|
|
|
)
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
|
2017-04-28 11:53:00 +00:00
|
|
|
// Walk the journal from here forward until we run out of new entries
|
|
|
|
|
// or we reach the until value (if provided).
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
drain:
|
|
|
|
|
for {
|
|
|
|
|
// Try not to send a given entry twice.
|
2016-10-15 14:12:15 +00:00
|
|
|
if oldCursor != nil {
|
|
|
|
|
for C.sd_journal_test_cursor(j, oldCursor) > 0 {
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
if C.sd_journal_next(j) <= 0 {
|
|
|
|
|
break drain
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
// Read and send the logged message, if there is one to read.
|
Improve logging of long log lines
This change updates how we handle long lines of output from the
container. The previous logic used a bufio reader to read entire lines
of output from the container through an intermediate BytesPipe, and that
allowed the container to cause dockerd to consume an unconstrained
amount of memory as it attempted to collect a whole line of output, by
outputting data without newlines.
To avoid that, we replace the bufio reader with our own buffering scheme
that handles log lines up to 16k in length, breaking up anything longer
than that into multiple chunks. If we can dispense with noting this
detail properly at the end of output, we can switch from using
ReadBytes() to using ReadLine() instead. We add a field ("Partial") to
the log message structure to flag when we pass data to the log driver
that did not end with a newline.
The Line member of Message structures that we pass to log drivers is now
a slice into data which can be overwritten between calls to the log
driver's Log() method, so drivers which batch up Messages before
processing them need to take additional care: we add a function
(logger.CopyMessage()) that can be used to create a deep copy of a
Message structure, and modify the awslogs driver to use it.
We update the jsonfile log driver to append a "\n" to the data that it
logs to disk only when the Partial flag is false (it previously did so
unconditionally), to make its "logs" output correctly reproduce the data
as we received it.
Likewise, we modify the journald log driver to add a data field with
value CONTAINER_PARTIAL_MESSAGE=true to entries when the Partial flag is
true, and update its "logs" reader to refrain from appending a "\n" to
the data that it retrieves if it does not see this field/value pair (it
also previously did this unconditionally).
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2016-05-24 18:12:47 +00:00
|
|
|
i := C.get_message(j, &msg, &length, &partial)
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
if i != -C.ENOENT && i != -C.EADDRNOTAVAIL {
|
|
|
|
|
// Read the entry's timestamp.
|
|
|
|
|
if C.sd_journal_get_realtime_usec(j, &stamp) != 0 {
|
|
|
|
|
break
|
|
|
|
|
}
|
2017-04-28 11:53:00 +00:00
|
|
|
// Break if the timestamp exceeds any provided until flag.
|
|
|
|
|
if untilUnixMicro != 0 && untilUnixMicro < uint64(stamp) {
|
|
|
|
|
done = true
|
|
|
|
|
break
|
|
|
|
|
}
|
|
|
|
|
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
// Set up the time and text of the entry.
|
|
|
|
|
timestamp := time.Unix(int64(stamp)/1000000, (int64(stamp)%1000000)*1000)
|
Improve logging of long log lines
This change updates how we handle long lines of output from the
container. The previous logic used a bufio reader to read entire lines
of output from the container through an intermediate BytesPipe, and that
allowed the container to cause dockerd to consume an unconstrained
amount of memory as it attempted to collect a whole line of output, by
outputting data without newlines.
To avoid that, we replace the bufio reader with our own buffering scheme
that handles log lines up to 16k in length, breaking up anything longer
than that into multiple chunks. If we can dispense with noting this
detail properly at the end of output, we can switch from using
ReadBytes() to using ReadLine() instead. We add a field ("Partial") to
the log message structure to flag when we pass data to the log driver
that did not end with a newline.
The Line member of Message structures that we pass to log drivers is now
a slice into data which can be overwritten between calls to the log
driver's Log() method, so drivers which batch up Messages before
processing them need to take additional care: we add a function
(logger.CopyMessage()) that can be used to create a deep copy of a
Message structure, and modify the awslogs driver to use it.
We update the jsonfile log driver to append a "\n" to the data that it
logs to disk only when the Partial flag is false (it previously did so
unconditionally), to make its "logs" output correctly reproduce the data
as we received it.
Likewise, we modify the journald log driver to add a data field with
value CONTAINER_PARTIAL_MESSAGE=true to entries when the Partial flag is
true, and update its "logs" reader to refrain from appending a "\n" to
the data that it retrieves if it does not see this field/value pair (it
also previously did this unconditionally).
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2016-05-24 18:12:47 +00:00
|
|
|
line := C.GoBytes(unsafe.Pointer(msg), C.int(length))
|
|
|
|
|
if partial == 0 {
|
|
|
|
|
line = append(line, "\n"...)
|
|
|
|
|
}
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
// Recover the stream name by mapping
|
|
|
|
|
// from the journal priority back to
|
|
|
|
|
// the stream that we would have
|
|
|
|
|
// assigned that value.
|
|
|
|
|
source := ""
|
2019-03-10 00:27:14 +00:00
|
|
|
if C.get_priority(j, &priority) == 0 {
|
|
|
|
|
if priority == C.int(journal.PriErr) {
|
|
|
|
|
source = "stderr"
|
|
|
|
|
} else if priority == C.int(journal.PriInfo) {
|
|
|
|
|
source = "stdout"
|
|
|
|
|
}
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
}
|
2016-04-14 19:21:42 +00:00
|
|
|
// Retrieve the values of any variables we're adding to the journal.
|
2017-07-19 02:01:20 +00:00
|
|
|
var attrs []backend.LogAttr
|
2016-04-14 19:21:42 +00:00
|
|
|
C.sd_journal_restart_data(j)
|
|
|
|
|
for C.get_attribute_field(j, &data, &length) > C.int(0) {
|
|
|
|
|
kv := strings.SplitN(C.GoStringN(data, C.int(length)), "=", 2)
|
2017-07-19 02:01:20 +00:00
|
|
|
attrs = append(attrs, backend.LogAttr{Key: kv[0], Value: kv[1]})
|
2016-04-14 19:21:42 +00:00
|
|
|
}
|
journald/read: simplify/fix followJournal()
TL;DR: simplify the code, fix --follow hanging indefinitely
Do the following to simplify the followJournal() code:
1. Use Go-native select instead of C-native polling.
2. Use Watch{Producer,Consumer}Gone(), eliminating the need
to have journald.closed variable, and an extra goroutine.
3. Use sd_journal_wait(). In the words of its own man page:
> A synchronous alternative for using sd_journal_get_fd(),
> sd_journal_get_events(), sd_journal_get_timeout() and
> sd_journal_process() is sd_journal_wait().
Unfortunately, the logic is still not as simple as it
could be; the reason being, once the container has exited,
journald might still be writing some logs from its internal
buffers onto journal file(s), and there is no way to
figure out whether it's done so we are guaranteed to
read all of it back. This bug can be reproduced with
something like
> $ ID=$(docker run -d busybox seq 1 150000); docker logs --follow $ID
> ...
> 128123
> $
(The last expected output line should be `150000`).
To avoid exiting from followJournal() early, add the
following logic: once the container is gone, keep trying
to drain the journal until there's no new data for at
least `waitTimeout` time period.
Should fix https://github.com/docker/for-linux/issues/575
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
2019-03-12 00:20:56 +00:00
|
|
|
|
2019-03-10 00:28:11 +00:00
|
|
|
// Send the log message, unless the consumer is gone
|
|
|
|
|
select {
|
|
|
|
|
case <-logWatcher.WatchConsumerGone():
|
|
|
|
|
done = true // we won't be able to write anything anymore
|
|
|
|
|
break drain
|
|
|
|
|
case logWatcher.Msg <- &logger.Message{
|
2016-04-14 19:21:42 +00:00
|
|
|
Line: line,
|
|
|
|
|
Source: source,
|
|
|
|
|
Timestamp: timestamp.In(time.UTC),
|
|
|
|
|
Attrs: attrs,
|
2019-03-10 00:28:11 +00:00
|
|
|
}:
|
journald/read: simplify/fix followJournal()
TL;DR: simplify the code, fix --follow hanging indefinitely
Do the following to simplify the followJournal() code:
1. Use Go-native select instead of C-native polling.
2. Use Watch{Producer,Consumer}Gone(), eliminating the need
to have journald.closed variable, and an extra goroutine.
3. Use sd_journal_wait(). In the words of its own man page:
> A synchronous alternative for using sd_journal_get_fd(),
> sd_journal_get_events(), sd_journal_get_timeout() and
> sd_journal_process() is sd_journal_wait().
Unfortunately, the logic is still not as simple as it
could be; the reason being, once the container has exited,
journald might still be writing some logs from its internal
buffers onto journal file(s), and there is no way to
figure out whether it's done so we are guaranteed to
read all of it back. This bug can be reproduced with
something like
> $ ID=$(docker run -d busybox seq 1 150000); docker logs --follow $ID
> ...
> 128123
> $
(The last expected output line should be `150000`).
To avoid exiting from followJournal() early, add the
following logic: once the container is gone, keep trying
to drain the journal until there's no new data for at
least `waitTimeout` time period.
Should fix https://github.com/docker/for-linux/issues/575
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
2019-03-12 00:20:56 +00:00
|
|
|
shown++
|
2016-04-14 19:21:42 +00:00
|
|
|
}
|
2019-03-10 03:39:33 +00:00
|
|
|
// Call sd_journal_process() periodically during the processing loop
|
|
|
|
|
// to close any opened file descriptors for rotated (deleted) journal files.
|
|
|
|
|
if shown%1024 == 0 {
|
|
|
|
|
if ret := C.sd_journal_process(j); ret < 0 {
|
|
|
|
|
// log a warning but ignore it for now
|
|
|
|
|
logrus.WithField("container", s.vars["CONTAINER_ID_FULL"]).
|
|
|
|
|
WithField("error", CErr(ret)).
|
|
|
|
|
Warn("journald: error processing journal")
|
|
|
|
|
}
|
|
|
|
|
}
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
}
|
|
|
|
|
// If we're at the end of the journal, we're done (for now).
|
|
|
|
|
if C.sd_journal_next(j) <= 0 {
|
|
|
|
|
break
|
|
|
|
|
}
|
|
|
|
|
}
|
2016-10-15 14:12:15 +00:00
|
|
|
|
|
|
|
|
// free(NULL) is safe
|
|
|
|
|
C.free(unsafe.Pointer(oldCursor))
|
2017-02-21 19:07:57 +00:00
|
|
|
if C.sd_journal_get_cursor(j, &cursor) != 0 {
|
|
|
|
|
// ensure that we won't be freeing an address that's invalid
|
|
|
|
|
cursor = nil
|
|
|
|
|
}
|
journald/read: simplify/fix followJournal()
TL;DR: simplify the code, fix --follow hanging indefinitely
Do the following to simplify the followJournal() code:
1. Use Go-native select instead of C-native polling.
2. Use Watch{Producer,Consumer}Gone(), eliminating the need
to have journald.closed variable, and an extra goroutine.
3. Use sd_journal_wait(). In the words of its own man page:
> A synchronous alternative for using sd_journal_get_fd(),
> sd_journal_get_events(), sd_journal_get_timeout() and
> sd_journal_process() is sd_journal_wait().
Unfortunately, the logic is still not as simple as it
could be; the reason being, once the container has exited,
journald might still be writing some logs from its internal
buffers onto journal file(s), and there is no way to
figure out whether it's done so we are guaranteed to
read all of it back. This bug can be reproduced with
something like
> $ ID=$(docker run -d busybox seq 1 150000); docker logs --follow $ID
> ...
> 128123
> $
(The last expected output line should be `150000`).
To avoid exiting from followJournal() early, add the
following logic: once the container is gone, keep trying
to drain the journal until there's no new data for at
least `waitTimeout` time period.
Should fix https://github.com/docker/for-linux/issues/575
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
2019-03-12 00:20:56 +00:00
|
|
|
return cursor, done, shown
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
}
|
|
|
|
|
|
journald/read: simplify/fix followJournal()
TL;DR: simplify the code, fix --follow hanging indefinitely
Do the following to simplify the followJournal() code:
1. Use Go-native select instead of C-native polling.
2. Use Watch{Producer,Consumer}Gone(), eliminating the need
to have journald.closed variable, and an extra goroutine.
3. Use sd_journal_wait(). In the words of its own man page:
> A synchronous alternative for using sd_journal_get_fd(),
> sd_journal_get_events(), sd_journal_get_timeout() and
> sd_journal_process() is sd_journal_wait().
Unfortunately, the logic is still not as simple as it
could be; the reason being, once the container has exited,
journald might still be writing some logs from its internal
buffers onto journal file(s), and there is no way to
figure out whether it's done so we are guaranteed to
read all of it back. This bug can be reproduced with
something like
> $ ID=$(docker run -d busybox seq 1 150000); docker logs --follow $ID
> ...
> 128123
> $
(The last expected output line should be `150000`).
To avoid exiting from followJournal() early, add the
following logic: once the container is gone, keep trying
to drain the journal until there's no new data for at
least `waitTimeout` time period.
Should fix https://github.com/docker/for-linux/issues/575
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
2019-03-12 00:20:56 +00:00
|
|
|
func (s *journald) followJournal(logWatcher *logger.LogWatcher, j *C.sd_journal, cursor *C.char, untilUnixMicro uint64) *C.char {
|
2022-03-02 23:38:16 +00:00
|
|
|
defer close(logWatcher.Msg)
|
2016-12-21 14:17:12 +00:00
|
|
|
|
journald/read: simplify/fix followJournal()
TL;DR: simplify the code, fix --follow hanging indefinitely
Do the following to simplify the followJournal() code:
1. Use Go-native select instead of C-native polling.
2. Use Watch{Producer,Consumer}Gone(), eliminating the need
to have journald.closed variable, and an extra goroutine.
3. Use sd_journal_wait(). In the words of its own man page:
> A synchronous alternative for using sd_journal_get_fd(),
> sd_journal_get_events(), sd_journal_get_timeout() and
> sd_journal_process() is sd_journal_wait().
Unfortunately, the logic is still not as simple as it
could be; the reason being, once the container has exited,
journald might still be writing some logs from its internal
buffers onto journal file(s), and there is no way to
figure out whether it's done so we are guaranteed to
read all of it back. This bug can be reproduced with
something like
> $ ID=$(docker run -d busybox seq 1 150000); docker logs --follow $ID
> ...
> 128123
> $
(The last expected output line should be `150000`).
To avoid exiting from followJournal() early, add the
following logic: once the container is gone, keep trying
to drain the journal until there's no new data for at
least `waitTimeout` time period.
Should fix https://github.com/docker/for-linux/issues/575
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
2019-03-12 00:20:56 +00:00
|
|
|
waitTimeout := C.uint64_t(250000) // 0.25s
|
2017-02-22 21:22:00 +00:00
|
|
|
|
journald/read: simplify/fix followJournal()
TL;DR: simplify the code, fix --follow hanging indefinitely
Do the following to simplify the followJournal() code:
1. Use Go-native select instead of C-native polling.
2. Use Watch{Producer,Consumer}Gone(), eliminating the need
to have journald.closed variable, and an extra goroutine.
3. Use sd_journal_wait(). In the words of its own man page:
> A synchronous alternative for using sd_journal_get_fd(),
> sd_journal_get_events(), sd_journal_get_timeout() and
> sd_journal_process() is sd_journal_wait().
Unfortunately, the logic is still not as simple as it
could be; the reason being, once the container has exited,
journald might still be writing some logs from its internal
buffers onto journal file(s), and there is no way to
figure out whether it's done so we are guaranteed to
read all of it back. This bug can be reproduced with
something like
> $ ID=$(docker run -d busybox seq 1 150000); docker logs --follow $ID
> ...
> 128123
> $
(The last expected output line should be `150000`).
To avoid exiting from followJournal() early, add the
following logic: once the container is gone, keep trying
to drain the journal until there's no new data for at
least `waitTimeout` time period.
Should fix https://github.com/docker/for-linux/issues/575
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
2019-03-12 00:20:56 +00:00
|
|
|
for {
|
|
|
|
|
status := C.sd_journal_wait(j, waitTimeout)
|
|
|
|
|
if status < 0 {
|
|
|
|
|
logWatcher.Err <- errors.New("error waiting for journal: " + CErr(status))
|
2022-03-02 23:38:16 +00:00
|
|
|
break
|
journald/read: simplify/fix followJournal()
TL;DR: simplify the code, fix --follow hanging indefinitely
Do the following to simplify the followJournal() code:
1. Use Go-native select instead of C-native polling.
2. Use Watch{Producer,Consumer}Gone(), eliminating the need
to have journald.closed variable, and an extra goroutine.
3. Use sd_journal_wait(). In the words of its own man page:
> A synchronous alternative for using sd_journal_get_fd(),
> sd_journal_get_events(), sd_journal_get_timeout() and
> sd_journal_process() is sd_journal_wait().
Unfortunately, the logic is still not as simple as it
could be; the reason being, once the container has exited,
journald might still be writing some logs from its internal
buffers onto journal file(s), and there is no way to
figure out whether it's done so we are guaranteed to
read all of it back. This bug can be reproduced with
something like
> $ ID=$(docker run -d busybox seq 1 150000); docker logs --follow $ID
> ...
> 128123
> $
(The last expected output line should be `150000`).
To avoid exiting from followJournal() early, add the
following logic: once the container is gone, keep trying
to drain the journal until there's no new data for at
least `waitTimeout` time period.
Should fix https://github.com/docker/for-linux/issues/575
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
2019-03-12 00:20:56 +00:00
|
|
|
}
|
|
|
|
|
select {
|
|
|
|
|
case <-logWatcher.WatchConsumerGone():
|
2022-03-02 23:38:16 +00:00
|
|
|
break // won't be able to write anything anymore
|
|
|
|
|
case <-s.closed:
|
journald/read: simplify/fix followJournal()
TL;DR: simplify the code, fix --follow hanging indefinitely
Do the following to simplify the followJournal() code:
1. Use Go-native select instead of C-native polling.
2. Use Watch{Producer,Consumer}Gone(), eliminating the need
to have journald.closed variable, and an extra goroutine.
3. Use sd_journal_wait(). In the words of its own man page:
> A synchronous alternative for using sd_journal_get_fd(),
> sd_journal_get_events(), sd_journal_get_timeout() and
> sd_journal_process() is sd_journal_wait().
Unfortunately, the logic is still not as simple as it
could be; the reason being, once the container has exited,
journald might still be writing some logs from its internal
buffers onto journal file(s), and there is no way to
figure out whether it's done so we are guaranteed to
read all of it back. This bug can be reproduced with
something like
> $ ID=$(docker run -d busybox seq 1 150000); docker logs --follow $ID
> ...
> 128123
> $
(The last expected output line should be `150000`).
To avoid exiting from followJournal() early, add the
following logic: once the container is gone, keep trying
to drain the journal until there's no new data for at
least `waitTimeout` time period.
Should fix https://github.com/docker/for-linux/issues/575
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
2019-03-12 00:20:56 +00:00
|
|
|
// container is gone, drain journal
|
|
|
|
|
default:
|
|
|
|
|
// container is still alive
|
|
|
|
|
if status == C.SD_JOURNAL_NOP {
|
|
|
|
|
// no new data -- keep waiting
|
|
|
|
|
continue
|
2016-12-21 14:17:12 +00:00
|
|
|
}
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
}
|
journald/read: simplify/fix followJournal()
TL;DR: simplify the code, fix --follow hanging indefinitely
Do the following to simplify the followJournal() code:
1. Use Go-native select instead of C-native polling.
2. Use Watch{Producer,Consumer}Gone(), eliminating the need
to have journald.closed variable, and an extra goroutine.
3. Use sd_journal_wait(). In the words of its own man page:
> A synchronous alternative for using sd_journal_get_fd(),
> sd_journal_get_events(), sd_journal_get_timeout() and
> sd_journal_process() is sd_journal_wait().
Unfortunately, the logic is still not as simple as it
could be; the reason being, once the container has exited,
journald might still be writing some logs from its internal
buffers onto journal file(s), and there is no way to
figure out whether it's done so we are guaranteed to
read all of it back. This bug can be reproduced with
something like
> $ ID=$(docker run -d busybox seq 1 150000); docker logs --follow $ID
> ...
> 128123
> $
(The last expected output line should be `150000`).
To avoid exiting from followJournal() early, add the
following logic: once the container is gone, keep trying
to drain the journal until there's no new data for at
least `waitTimeout` time period.
Should fix https://github.com/docker/for-linux/issues/575
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
2019-03-12 00:20:56 +00:00
|
|
|
newCursor, done, recv := s.drainJournal(logWatcher, j, cursor, untilUnixMicro)
|
|
|
|
|
cursor = newCursor
|
|
|
|
|
if done || (status == C.SD_JOURNAL_NOP && recv == 0) {
|
|
|
|
|
break
|
|
|
|
|
}
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
}
|
2016-10-15 14:12:15 +00:00
|
|
|
|
|
|
|
|
return cursor
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (s *journald) readLogs(logWatcher *logger.LogWatcher, config logger.ReadConfig) {
|
journald/read: simplify/fix followJournal()
TL;DR: simplify the code, fix --follow hanging indefinitely
Do the following to simplify the followJournal() code:
1. Use Go-native select instead of C-native polling.
2. Use Watch{Producer,Consumer}Gone(), eliminating the need
to have journald.closed variable, and an extra goroutine.
3. Use sd_journal_wait(). In the words of its own man page:
> A synchronous alternative for using sd_journal_get_fd(),
> sd_journal_get_events(), sd_journal_get_timeout() and
> sd_journal_process() is sd_journal_wait().
Unfortunately, the logic is still not as simple as it
could be; the reason being, once the container has exited,
journald might still be writing some logs from its internal
buffers onto journal file(s), and there is no way to
figure out whether it's done so we are guaranteed to
read all of it back. This bug can be reproduced with
something like
> $ ID=$(docker run -d busybox seq 1 150000); docker logs --follow $ID
> ...
> 128123
> $
(The last expected output line should be `150000`).
To avoid exiting from followJournal() early, add the
following logic: once the container is gone, keep trying
to drain the journal until there's no new data for at
least `waitTimeout` time period.
Should fix https://github.com/docker/for-linux/issues/575
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
2019-03-12 00:20:56 +00:00
|
|
|
var (
|
|
|
|
|
j *C.sd_journal
|
|
|
|
|
cmatch, cursor *C.char
|
|
|
|
|
stamp C.uint64_t
|
|
|
|
|
sinceUnixMicro uint64
|
|
|
|
|
untilUnixMicro uint64
|
|
|
|
|
)
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
|
|
|
|
|
// Get a handle to the journal.
|
2019-03-13 23:30:46 +00:00
|
|
|
if rc := C.sd_journal_open(&j, C.int(0)); rc != 0 {
|
|
|
|
|
logWatcher.Err <- errors.New("error opening journal: " + CErr(rc))
|
2016-03-17 20:19:54 +00:00
|
|
|
close(logWatcher.Msg)
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
return
|
|
|
|
|
}
|
2019-03-11 22:40:17 +00:00
|
|
|
if config.Follow {
|
|
|
|
|
// Initialize library inotify watches early
|
2019-03-13 23:30:46 +00:00
|
|
|
if rc := C.sd_journal_get_fd(j); rc < 0 {
|
2019-03-11 22:40:17 +00:00
|
|
|
logWatcher.Err <- errors.New("error getting journald fd: " + CErr(rc))
|
|
|
|
|
close(logWatcher.Msg)
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
}
|
2016-03-17 20:19:54 +00:00
|
|
|
// If we end up following the log, we can set the journal context
|
|
|
|
|
// pointer and the channel pointer to nil so that we won't close them
|
|
|
|
|
// here, potentially while the goroutine that uses them is still
|
|
|
|
|
// running. Otherwise, close them when we return from this function.
|
|
|
|
|
following := false
|
2018-02-07 15:35:26 +00:00
|
|
|
defer func() {
|
|
|
|
|
if !following {
|
2016-03-17 20:19:54 +00:00
|
|
|
close(logWatcher.Msg)
|
|
|
|
|
}
|
2017-02-21 19:07:57 +00:00
|
|
|
C.sd_journal_close(j)
|
2018-02-07 15:35:26 +00:00
|
|
|
}()
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
// Remove limits on the size of data items that we'll retrieve.
|
2019-03-13 23:30:46 +00:00
|
|
|
if rc := C.sd_journal_set_data_threshold(j, C.size_t(0)); rc != 0 {
|
|
|
|
|
logWatcher.Err <- errors.New("error setting journal data threshold: " + CErr(rc))
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
// Add a match to have the library do the searching for us.
|
|
|
|
|
cmatch = C.CString("CONTAINER_ID_FULL=" + s.vars["CONTAINER_ID_FULL"])
|
|
|
|
|
defer C.free(unsafe.Pointer(cmatch))
|
2019-03-13 23:30:46 +00:00
|
|
|
if rc := C.sd_journal_add_match(j, unsafe.Pointer(cmatch), C.strlen(cmatch)); rc != 0 {
|
|
|
|
|
logWatcher.Err <- errors.New("error setting journal match: " + CErr(rc))
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
// If we have a cutoff time, convert it to Unix time once.
|
|
|
|
|
if !config.Since.IsZero() {
|
|
|
|
|
nano := config.Since.UnixNano()
|
|
|
|
|
sinceUnixMicro = uint64(nano / 1000)
|
|
|
|
|
}
|
2017-04-28 11:53:00 +00:00
|
|
|
// If we have an until value, convert it too
|
|
|
|
|
if !config.Until.IsZero() {
|
|
|
|
|
nano := config.Until.UnixNano()
|
|
|
|
|
untilUnixMicro = uint64(nano / 1000)
|
|
|
|
|
}
|
2019-03-12 07:36:44 +00:00
|
|
|
if config.Tail >= 0 {
|
2017-04-28 11:53:00 +00:00
|
|
|
// If until time provided, start from there.
|
|
|
|
|
// Otherwise start at the end of the journal.
|
2019-03-13 23:30:46 +00:00
|
|
|
if untilUnixMicro != 0 {
|
|
|
|
|
if rc := C.sd_journal_seek_realtime_usec(j, C.uint64_t(untilUnixMicro)); rc != 0 {
|
|
|
|
|
logWatcher.Err <- errors.New("error seeking provided until value: " + CErr(rc))
|
|
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
} else if rc := C.sd_journal_seek_tail(j); rc != 0 {
|
|
|
|
|
logWatcher.Err <- errors.New("error seeking to end of journal: " + CErr(rc))
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
return
|
|
|
|
|
}
|
2019-03-10 03:49:06 +00:00
|
|
|
// (Try to) skip backwards by the requested number of lines...
|
2019-03-12 07:36:44 +00:00
|
|
|
if C.sd_journal_previous_skip(j, C.uint64_t(config.Tail)) >= 0 {
|
2019-03-10 03:49:06 +00:00
|
|
|
// ...but not before "since"
|
|
|
|
|
if sinceUnixMicro != 0 &&
|
|
|
|
|
C.sd_journal_get_realtime_usec(j, &stamp) == 0 &&
|
|
|
|
|
uint64(stamp) < sinceUnixMicro {
|
|
|
|
|
C.sd_journal_seek_realtime_usec(j, C.uint64_t(sinceUnixMicro))
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
// Start at the beginning of the journal.
|
2019-03-13 23:30:46 +00:00
|
|
|
if rc := C.sd_journal_seek_head(j); rc != 0 {
|
|
|
|
|
logWatcher.Err <- errors.New("error seeking to start of journal: " + CErr(rc))
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
// If we have a cutoff date, fast-forward to it.
|
2019-03-13 23:30:46 +00:00
|
|
|
if sinceUnixMicro != 0 {
|
|
|
|
|
if rc := C.sd_journal_seek_realtime_usec(j, C.uint64_t(sinceUnixMicro)); rc != 0 {
|
|
|
|
|
logWatcher.Err <- errors.New("error seeking to start time in journal: " + CErr(rc))
|
|
|
|
|
return
|
|
|
|
|
}
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
}
|
2019-03-13 23:30:46 +00:00
|
|
|
if rc := C.sd_journal_next(j); rc < 0 {
|
|
|
|
|
logWatcher.Err <- errors.New("error skipping to next journal entry: " + CErr(rc))
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
return
|
|
|
|
|
}
|
|
|
|
|
}
|
2019-03-12 07:36:44 +00:00
|
|
|
if config.Tail != 0 { // special case for --tail 0
|
|
|
|
|
cursor, _, _ = s.drainJournal(logWatcher, j, nil, untilUnixMicro)
|
|
|
|
|
}
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
if config.Follow {
|
journald/read: simplify/fix followJournal()
TL;DR: simplify the code, fix --follow hanging indefinitely
Do the following to simplify the followJournal() code:
1. Use Go-native select instead of C-native polling.
2. Use Watch{Producer,Consumer}Gone(), eliminating the need
to have journald.closed variable, and an extra goroutine.
3. Use sd_journal_wait(). In the words of its own man page:
> A synchronous alternative for using sd_journal_get_fd(),
> sd_journal_get_events(), sd_journal_get_timeout() and
> sd_journal_process() is sd_journal_wait().
Unfortunately, the logic is still not as simple as it
could be; the reason being, once the container has exited,
journald might still be writing some logs from its internal
buffers onto journal file(s), and there is no way to
figure out whether it's done so we are guaranteed to
read all of it back. This bug can be reproduced with
something like
> $ ID=$(docker run -d busybox seq 1 150000); docker logs --follow $ID
> ...
> 128123
> $
(The last expected output line should be `150000`).
To avoid exiting from followJournal() early, add the
following logic: once the container is gone, keep trying
to drain the journal until there's no new data for at
least `waitTimeout` time period.
Should fix https://github.com/docker/for-linux/issues/575
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
2019-03-12 00:20:56 +00:00
|
|
|
cursor = s.followJournal(logWatcher, j, cursor, untilUnixMicro)
|
|
|
|
|
// Let followJournal handle freeing the journal context
|
|
|
|
|
// object and closing the channel.
|
|
|
|
|
following = true
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
}
|
2016-10-15 14:12:15 +00:00
|
|
|
|
|
|
|
|
C.free(unsafe.Pointer(cursor))
|
Add log reading to the journald log driver
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
2015-07-23 15:02:56 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
func (s *journald) ReadLogs(config logger.ReadConfig) *logger.LogWatcher {
|
|
|
|
|
logWatcher := logger.NewLogWatcher()
|
|
|
|
|
go s.readLogs(logWatcher, config)
|
|
|
|
|
return logWatcher
|
|
|
|
|
}
|