1
0
Fork 0
mirror of https://github.com/moby/moby.git synced 2022-11-09 12:21:53 -05:00
moby--moby/hack/make/build-deb

74 lines
3.1 KiB
Text
Raw Normal View History

#!/bin/bash
set -e
# subshell so that we can export PATH and TZ without breaking other things
(
export TZ=UTC # make sure our "date" variables are UTC-based
bundle .integration-daemon-start
Fix daemon start/stop logic in hack/make/* scripts From the Bash manual's `set -e` description: (https://www.gnu.org/software/bash/manual/bashref.html#index-set) > Exit immediately if a pipeline (see Pipelines), which may consist of a > single simple command (see Simple Commands), a list (see Lists), or a > compound command (see Compound Commands) returns a non-zero status. > The shell does not exit if the command that fails is part of the > command list immediately following a while or until keyword, part of > the test in an if statement, part of any command executed in a && or > || list except the command following the final && or ||, any command > in a pipeline but the last, or if the command’s return status is being > inverted with !. If a compound command other than a subshell returns a > non-zero status because a command failed while -e was being ignored, > the shell does not exit. Additionally, further down: > If a compound command or shell function executes in a context where -e > is being ignored, none of the commands executed within the compound > command or function body will be affected by the -e setting, even if > -e is set and a command returns a failure status. If a compound > command or shell function sets -e while executing in a context where > -e is ignored, that setting will not have any effect until the > compound command or the command containing the function call > completes. Thus, the only way to have our `.integration-daemon-stop` script actually run appropriately to clean up our daemon on test/script failure is to use `trap ... EXIT`, which we traditionally avoid because it does not have any stacking capabilities, but in this case is a reasonable compromise because it's going to be the only script using it (for now, at least; we can evaluate more complex solutions in the future if they actually become necessary). The alternatives were much less reasonable. One is to have the entire complex chains in any script wanting to use `.integration-daemon-start` / `.integration-daemon-stop` be chained together with `&&` in an `if` block, which is untenable. The other I could think of was taking the body of these scripts out into separate scripts, essentially meaning we'd need two files for each of these, which further complicates the maintenance. Add to that the fact that our `trap ... EXIT` is scoped to the enclosing subshell (`( ... )`) and we're in even more reasonable territory with this pattern. Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-04-17 18:19:34 -04:00
# TODO consider using frozen images for the dockercore/builder-deb tags
tilde='~' # ouch Bash 4.2 vs 4.3, you keel me
debVersion="${VERSION//-/$tilde}" # using \~ or '~' here works in 4.3, but not 4.2; just ~ causes $HOME to be inserted, hence the $tilde
Fix daemon start/stop logic in hack/make/* scripts From the Bash manual's `set -e` description: (https://www.gnu.org/software/bash/manual/bashref.html#index-set) > Exit immediately if a pipeline (see Pipelines), which may consist of a > single simple command (see Simple Commands), a list (see Lists), or a > compound command (see Compound Commands) returns a non-zero status. > The shell does not exit if the command that fails is part of the > command list immediately following a while or until keyword, part of > the test in an if statement, part of any command executed in a && or > || list except the command following the final && or ||, any command > in a pipeline but the last, or if the command’s return status is being > inverted with !. If a compound command other than a subshell returns a > non-zero status because a command failed while -e was being ignored, > the shell does not exit. Additionally, further down: > If a compound command or shell function executes in a context where -e > is being ignored, none of the commands executed within the compound > command or function body will be affected by the -e setting, even if > -e is set and a command returns a failure status. If a compound > command or shell function sets -e while executing in a context where > -e is ignored, that setting will not have any effect until the > compound command or the command containing the function call > completes. Thus, the only way to have our `.integration-daemon-stop` script actually run appropriately to clean up our daemon on test/script failure is to use `trap ... EXIT`, which we traditionally avoid because it does not have any stacking capabilities, but in this case is a reasonable compromise because it's going to be the only script using it (for now, at least; we can evaluate more complex solutions in the future if they actually become necessary). The alternatives were much less reasonable. One is to have the entire complex chains in any script wanting to use `.integration-daemon-start` / `.integration-daemon-stop` be chained together with `&&` in an `if` block, which is untenable. The other I could think of was taking the body of these scripts out into separate scripts, essentially meaning we'd need two files for each of these, which further complicates the maintenance. Add to that the fact that our `trap ... EXIT` is scoped to the enclosing subshell (`( ... )`) and we're in even more reasonable territory with this pattern. Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-04-17 18:19:34 -04:00
# if we have a "-dev" suffix or have change in Git, let's make this package version more complex so it works better
if [[ "$VERSION" == *-dev ]] || [ -n "$(git status --porcelain)" ]; then
gitUnix="$(git log -1 --pretty='%at')"
gitDate="$(date --date "@$gitUnix" +'%Y%m%d.%H%M%S')"
gitCommit="$(git log -1 --pretty='%h')"
gitVersion="git${gitDate}.0.${gitCommit}"
# gitVersion is now something like 'git20150128.112847.0.17e840a'
debVersion="$debVersion~$gitVersion"
Fix daemon start/stop logic in hack/make/* scripts From the Bash manual's `set -e` description: (https://www.gnu.org/software/bash/manual/bashref.html#index-set) > Exit immediately if a pipeline (see Pipelines), which may consist of a > single simple command (see Simple Commands), a list (see Lists), or a > compound command (see Compound Commands) returns a non-zero status. > The shell does not exit if the command that fails is part of the > command list immediately following a while or until keyword, part of > the test in an if statement, part of any command executed in a && or > || list except the command following the final && or ||, any command > in a pipeline but the last, or if the command’s return status is being > inverted with !. If a compound command other than a subshell returns a > non-zero status because a command failed while -e was being ignored, > the shell does not exit. Additionally, further down: > If a compound command or shell function executes in a context where -e > is being ignored, none of the commands executed within the compound > command or function body will be affected by the -e setting, even if > -e is set and a command returns a failure status. If a compound > command or shell function sets -e while executing in a context where > -e is ignored, that setting will not have any effect until the > compound command or the command containing the function call > completes. Thus, the only way to have our `.integration-daemon-stop` script actually run appropriately to clean up our daemon on test/script failure is to use `trap ... EXIT`, which we traditionally avoid because it does not have any stacking capabilities, but in this case is a reasonable compromise because it's going to be the only script using it (for now, at least; we can evaluate more complex solutions in the future if they actually become necessary). The alternatives were much less reasonable. One is to have the entire complex chains in any script wanting to use `.integration-daemon-start` / `.integration-daemon-stop` be chained together with `&&` in an `if` block, which is untenable. The other I could think of was taking the body of these scripts out into separate scripts, essentially meaning we'd need two files for each of these, which further complicates the maintenance. Add to that the fact that our `trap ... EXIT` is scoped to the enclosing subshell (`( ... )`) and we're in even more reasonable territory with this pattern. Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-04-17 18:19:34 -04:00
# $ dpkg --compare-versions 1.5.0 gt 1.5.0~rc1 && echo true || echo false
# true
# $ dpkg --compare-versions 1.5.0~rc1 gt 1.5.0~git20150128.112847.17e840a && echo true || echo false
# true
# $ dpkg --compare-versions 1.5.0~git20150128.112847.17e840a gt 1.5.0~dev~git20150128.112847.17e840a && echo true || echo false
# true
Fix daemon start/stop logic in hack/make/* scripts From the Bash manual's `set -e` description: (https://www.gnu.org/software/bash/manual/bashref.html#index-set) > Exit immediately if a pipeline (see Pipelines), which may consist of a > single simple command (see Simple Commands), a list (see Lists), or a > compound command (see Compound Commands) returns a non-zero status. > The shell does not exit if the command that fails is part of the > command list immediately following a while or until keyword, part of > the test in an if statement, part of any command executed in a && or > || list except the command following the final && or ||, any command > in a pipeline but the last, or if the command’s return status is being > inverted with !. If a compound command other than a subshell returns a > non-zero status because a command failed while -e was being ignored, > the shell does not exit. Additionally, further down: > If a compound command or shell function executes in a context where -e > is being ignored, none of the commands executed within the compound > command or function body will be affected by the -e setting, even if > -e is set and a command returns a failure status. If a compound > command or shell function sets -e while executing in a context where > -e is ignored, that setting will not have any effect until the > compound command or the command containing the function call > completes. Thus, the only way to have our `.integration-daemon-stop` script actually run appropriately to clean up our daemon on test/script failure is to use `trap ... EXIT`, which we traditionally avoid because it does not have any stacking capabilities, but in this case is a reasonable compromise because it's going to be the only script using it (for now, at least; we can evaluate more complex solutions in the future if they actually become necessary). The alternatives were much less reasonable. One is to have the entire complex chains in any script wanting to use `.integration-daemon-start` / `.integration-daemon-stop` be chained together with `&&` in an `if` block, which is untenable. The other I could think of was taking the body of these scripts out into separate scripts, essentially meaning we'd need two files for each of these, which further complicates the maintenance. Add to that the fact that our `trap ... EXIT` is scoped to the enclosing subshell (`( ... )`) and we're in even more reasonable territory with this pattern. Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-04-17 18:19:34 -04:00
# ie, 1.5.0 > 1.5.0~rc1 > 1.5.0~git20150128.112847.17e840a > 1.5.0~dev~git20150128.112847.17e840a
fi
Fix daemon start/stop logic in hack/make/* scripts From the Bash manual's `set -e` description: (https://www.gnu.org/software/bash/manual/bashref.html#index-set) > Exit immediately if a pipeline (see Pipelines), which may consist of a > single simple command (see Simple Commands), a list (see Lists), or a > compound command (see Compound Commands) returns a non-zero status. > The shell does not exit if the command that fails is part of the > command list immediately following a while or until keyword, part of > the test in an if statement, part of any command executed in a && or > || list except the command following the final && or ||, any command > in a pipeline but the last, or if the command’s return status is being > inverted with !. If a compound command other than a subshell returns a > non-zero status because a command failed while -e was being ignored, > the shell does not exit. Additionally, further down: > If a compound command or shell function executes in a context where -e > is being ignored, none of the commands executed within the compound > command or function body will be affected by the -e setting, even if > -e is set and a command returns a failure status. If a compound > command or shell function sets -e while executing in a context where > -e is ignored, that setting will not have any effect until the > compound command or the command containing the function call > completes. Thus, the only way to have our `.integration-daemon-stop` script actually run appropriately to clean up our daemon on test/script failure is to use `trap ... EXIT`, which we traditionally avoid because it does not have any stacking capabilities, but in this case is a reasonable compromise because it's going to be the only script using it (for now, at least; we can evaluate more complex solutions in the future if they actually become necessary). The alternatives were much less reasonable. One is to have the entire complex chains in any script wanting to use `.integration-daemon-start` / `.integration-daemon-stop` be chained together with `&&` in an `if` block, which is untenable. The other I could think of was taking the body of these scripts out into separate scripts, essentially meaning we'd need two files for each of these, which further complicates the maintenance. Add to that the fact that our `trap ... EXIT` is scoped to the enclosing subshell (`( ... )`) and we're in even more reasonable territory with this pattern. Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-04-17 18:19:34 -04:00
debSource="$(awk -F ': ' '$1 == "Source" { print $2; exit }' hack/make/.build-deb/control)"
debMaintainer="$(awk -F ': ' '$1 == "Maintainer" { print $2; exit }' hack/make/.build-deb/control)"
debDate="$(date --rfc-2822)"
Fix daemon start/stop logic in hack/make/* scripts From the Bash manual's `set -e` description: (https://www.gnu.org/software/bash/manual/bashref.html#index-set) > Exit immediately if a pipeline (see Pipelines), which may consist of a > single simple command (see Simple Commands), a list (see Lists), or a > compound command (see Compound Commands) returns a non-zero status. > The shell does not exit if the command that fails is part of the > command list immediately following a while or until keyword, part of > the test in an if statement, part of any command executed in a && or > || list except the command following the final && or ||, any command > in a pipeline but the last, or if the command’s return status is being > inverted with !. If a compound command other than a subshell returns a > non-zero status because a command failed while -e was being ignored, > the shell does not exit. Additionally, further down: > If a compound command or shell function executes in a context where -e > is being ignored, none of the commands executed within the compound > command or function body will be affected by the -e setting, even if > -e is set and a command returns a failure status. If a compound > command or shell function sets -e while executing in a context where > -e is ignored, that setting will not have any effect until the > compound command or the command containing the function call > completes. Thus, the only way to have our `.integration-daemon-stop` script actually run appropriately to clean up our daemon on test/script failure is to use `trap ... EXIT`, which we traditionally avoid because it does not have any stacking capabilities, but in this case is a reasonable compromise because it's going to be the only script using it (for now, at least; we can evaluate more complex solutions in the future if they actually become necessary). The alternatives were much less reasonable. One is to have the entire complex chains in any script wanting to use `.integration-daemon-start` / `.integration-daemon-stop` be chained together with `&&` in an `if` block, which is untenable. The other I could think of was taking the body of these scripts out into separate scripts, essentially meaning we'd need two files for each of these, which further complicates the maintenance. Add to that the fact that our `trap ... EXIT` is scoped to the enclosing subshell (`( ... )`) and we're in even more reasonable territory with this pattern. Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-04-17 18:19:34 -04:00
# if go-md2man is available, pre-generate the man pages
./man/md2man-all.sh -q || true
Fix daemon start/stop logic in hack/make/* scripts From the Bash manual's `set -e` description: (https://www.gnu.org/software/bash/manual/bashref.html#index-set) > Exit immediately if a pipeline (see Pipelines), which may consist of a > single simple command (see Simple Commands), a list (see Lists), or a > compound command (see Compound Commands) returns a non-zero status. > The shell does not exit if the command that fails is part of the > command list immediately following a while or until keyword, part of > the test in an if statement, part of any command executed in a && or > || list except the command following the final && or ||, any command > in a pipeline but the last, or if the command’s return status is being > inverted with !. If a compound command other than a subshell returns a > non-zero status because a command failed while -e was being ignored, > the shell does not exit. Additionally, further down: > If a compound command or shell function executes in a context where -e > is being ignored, none of the commands executed within the compound > command or function body will be affected by the -e setting, even if > -e is set and a command returns a failure status. If a compound > command or shell function sets -e while executing in a context where > -e is ignored, that setting will not have any effect until the > compound command or the command containing the function call > completes. Thus, the only way to have our `.integration-daemon-stop` script actually run appropriately to clean up our daemon on test/script failure is to use `trap ... EXIT`, which we traditionally avoid because it does not have any stacking capabilities, but in this case is a reasonable compromise because it's going to be the only script using it (for now, at least; we can evaluate more complex solutions in the future if they actually become necessary). The alternatives were much less reasonable. One is to have the entire complex chains in any script wanting to use `.integration-daemon-start` / `.integration-daemon-stop` be chained together with `&&` in an `if` block, which is untenable. The other I could think of was taking the body of these scripts out into separate scripts, essentially meaning we'd need two files for each of these, which further complicates the maintenance. Add to that the fact that our `trap ... EXIT` is scoped to the enclosing subshell (`( ... )`) and we're in even more reasonable territory with this pattern. Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-04-17 18:19:34 -04:00
# TODO decide if it's worth getting go-md2man in _each_ builder environment to avoid this
Fix daemon start/stop logic in hack/make/* scripts From the Bash manual's `set -e` description: (https://www.gnu.org/software/bash/manual/bashref.html#index-set) > Exit immediately if a pipeline (see Pipelines), which may consist of a > single simple command (see Simple Commands), a list (see Lists), or a > compound command (see Compound Commands) returns a non-zero status. > The shell does not exit if the command that fails is part of the > command list immediately following a while or until keyword, part of > the test in an if statement, part of any command executed in a && or > || list except the command following the final && or ||, any command > in a pipeline but the last, or if the command’s return status is being > inverted with !. If a compound command other than a subshell returns a > non-zero status because a command failed while -e was being ignored, > the shell does not exit. Additionally, further down: > If a compound command or shell function executes in a context where -e > is being ignored, none of the commands executed within the compound > command or function body will be affected by the -e setting, even if > -e is set and a command returns a failure status. If a compound > command or shell function sets -e while executing in a context where > -e is ignored, that setting will not have any effect until the > compound command or the command containing the function call > completes. Thus, the only way to have our `.integration-daemon-stop` script actually run appropriately to clean up our daemon on test/script failure is to use `trap ... EXIT`, which we traditionally avoid because it does not have any stacking capabilities, but in this case is a reasonable compromise because it's going to be the only script using it (for now, at least; we can evaluate more complex solutions in the future if they actually become necessary). The alternatives were much less reasonable. One is to have the entire complex chains in any script wanting to use `.integration-daemon-start` / `.integration-daemon-stop` be chained together with `&&` in an `if` block, which is untenable. The other I could think of was taking the body of these scripts out into separate scripts, essentially meaning we'd need two files for each of these, which further complicates the maintenance. Add to that the fact that our `trap ... EXIT` is scoped to the enclosing subshell (`( ... )`) and we're in even more reasonable territory with this pattern. Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-04-17 18:19:34 -04:00
# TODO add a configurable knob for _which_ debs to build so we don't have to modify the file or build all of them every time we need to test
for dir in contrib/builder/deb/*/; do
version="$(basename "$dir")"
suite="${version##*-}"
Fix daemon start/stop logic in hack/make/* scripts From the Bash manual's `set -e` description: (https://www.gnu.org/software/bash/manual/bashref.html#index-set) > Exit immediately if a pipeline (see Pipelines), which may consist of a > single simple command (see Simple Commands), a list (see Lists), or a > compound command (see Compound Commands) returns a non-zero status. > The shell does not exit if the command that fails is part of the > command list immediately following a while or until keyword, part of > the test in an if statement, part of any command executed in a && or > || list except the command following the final && or ||, any command > in a pipeline but the last, or if the command’s return status is being > inverted with !. If a compound command other than a subshell returns a > non-zero status because a command failed while -e was being ignored, > the shell does not exit. Additionally, further down: > If a compound command or shell function executes in a context where -e > is being ignored, none of the commands executed within the compound > command or function body will be affected by the -e setting, even if > -e is set and a command returns a failure status. If a compound > command or shell function sets -e while executing in a context where > -e is ignored, that setting will not have any effect until the > compound command or the command containing the function call > completes. Thus, the only way to have our `.integration-daemon-stop` script actually run appropriately to clean up our daemon on test/script failure is to use `trap ... EXIT`, which we traditionally avoid because it does not have any stacking capabilities, but in this case is a reasonable compromise because it's going to be the only script using it (for now, at least; we can evaluate more complex solutions in the future if they actually become necessary). The alternatives were much less reasonable. One is to have the entire complex chains in any script wanting to use `.integration-daemon-start` / `.integration-daemon-stop` be chained together with `&&` in an `if` block, which is untenable. The other I could think of was taking the body of these scripts out into separate scripts, essentially meaning we'd need two files for each of these, which further complicates the maintenance. Add to that the fact that our `trap ... EXIT` is scoped to the enclosing subshell (`( ... )`) and we're in even more reasonable territory with this pattern. Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-04-17 18:19:34 -04:00
image="dockercore/builder-deb:$version"
if ! docker inspect "$image" &> /dev/null; then
( set -x && docker build -t "$image" "$dir" )
fi
Fix daemon start/stop logic in hack/make/* scripts From the Bash manual's `set -e` description: (https://www.gnu.org/software/bash/manual/bashref.html#index-set) > Exit immediately if a pipeline (see Pipelines), which may consist of a > single simple command (see Simple Commands), a list (see Lists), or a > compound command (see Compound Commands) returns a non-zero status. > The shell does not exit if the command that fails is part of the > command list immediately following a while or until keyword, part of > the test in an if statement, part of any command executed in a && or > || list except the command following the final && or ||, any command > in a pipeline but the last, or if the command’s return status is being > inverted with !. If a compound command other than a subshell returns a > non-zero status because a command failed while -e was being ignored, > the shell does not exit. Additionally, further down: > If a compound command or shell function executes in a context where -e > is being ignored, none of the commands executed within the compound > command or function body will be affected by the -e setting, even if > -e is set and a command returns a failure status. If a compound > command or shell function sets -e while executing in a context where > -e is ignored, that setting will not have any effect until the > compound command or the command containing the function call > completes. Thus, the only way to have our `.integration-daemon-stop` script actually run appropriately to clean up our daemon on test/script failure is to use `trap ... EXIT`, which we traditionally avoid because it does not have any stacking capabilities, but in this case is a reasonable compromise because it's going to be the only script using it (for now, at least; we can evaluate more complex solutions in the future if they actually become necessary). The alternatives were much less reasonable. One is to have the entire complex chains in any script wanting to use `.integration-daemon-start` / `.integration-daemon-stop` be chained together with `&&` in an `if` block, which is untenable. The other I could think of was taking the body of these scripts out into separate scripts, essentially meaning we'd need two files for each of these, which further complicates the maintenance. Add to that the fact that our `trap ... EXIT` is scoped to the enclosing subshell (`( ... )`) and we're in even more reasonable territory with this pattern. Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-04-17 18:19:34 -04:00
mkdir -p "$DEST/$version"
cat > "$DEST/$version/Dockerfile.build" <<-EOF
FROM $image
WORKDIR /usr/src/docker
COPY . /usr/src/docker
EOF
if [ "$DOCKER_EXPERIMENTAL" ]; then
echo 'ENV DOCKER_EXPERIMENTAL 1' >> "$DEST/$version/Dockerfile.build"
fi
cat >> "$DEST/$version/Dockerfile.build" <<-EOF
RUN go build -o aagen contrib/apparmor/*.go \
&& ./aagen contrib/apparmor/docker-engine
Fix daemon start/stop logic in hack/make/* scripts From the Bash manual's `set -e` description: (https://www.gnu.org/software/bash/manual/bashref.html#index-set) > Exit immediately if a pipeline (see Pipelines), which may consist of a > single simple command (see Simple Commands), a list (see Lists), or a > compound command (see Compound Commands) returns a non-zero status. > The shell does not exit if the command that fails is part of the > command list immediately following a while or until keyword, part of > the test in an if statement, part of any command executed in a && or > || list except the command following the final && or ||, any command > in a pipeline but the last, or if the command’s return status is being > inverted with !. If a compound command other than a subshell returns a > non-zero status because a command failed while -e was being ignored, > the shell does not exit. Additionally, further down: > If a compound command or shell function executes in a context where -e > is being ignored, none of the commands executed within the compound > command or function body will be affected by the -e setting, even if > -e is set and a command returns a failure status. If a compound > command or shell function sets -e while executing in a context where > -e is ignored, that setting will not have any effect until the > compound command or the command containing the function call > completes. Thus, the only way to have our `.integration-daemon-stop` script actually run appropriately to clean up our daemon on test/script failure is to use `trap ... EXIT`, which we traditionally avoid because it does not have any stacking capabilities, but in this case is a reasonable compromise because it's going to be the only script using it (for now, at least; we can evaluate more complex solutions in the future if they actually become necessary). The alternatives were much less reasonable. One is to have the entire complex chains in any script wanting to use `.integration-daemon-start` / `.integration-daemon-stop` be chained together with `&&` in an `if` block, which is untenable. The other I could think of was taking the body of these scripts out into separate scripts, essentially meaning we'd need two files for each of these, which further complicates the maintenance. Add to that the fact that our `trap ... EXIT` is scoped to the enclosing subshell (`( ... )`) and we're in even more reasonable territory with this pattern. Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-04-17 18:19:34 -04:00
RUN ln -sfv hack/make/.build-deb debian
RUN { echo '$debSource (${debVersion}-0~${suite}) $suite; urgency=low'; echo; echo ' * Version: $VERSION'; echo; echo " -- $debMaintainer $debDate"; } > debian/changelog && cat >&2 debian/changelog
RUN dpkg-buildpackage -uc -us
EOF
tempImage="docker-temp/build-deb:$version"
( set -x && docker build -t "$tempImage" -f "$DEST/$version/Dockerfile.build" . )
Fix daemon start/stop logic in hack/make/* scripts From the Bash manual's `set -e` description: (https://www.gnu.org/software/bash/manual/bashref.html#index-set) > Exit immediately if a pipeline (see Pipelines), which may consist of a > single simple command (see Simple Commands), a list (see Lists), or a > compound command (see Compound Commands) returns a non-zero status. > The shell does not exit if the command that fails is part of the > command list immediately following a while or until keyword, part of > the test in an if statement, part of any command executed in a && or > || list except the command following the final && or ||, any command > in a pipeline but the last, or if the command’s return status is being > inverted with !. If a compound command other than a subshell returns a > non-zero status because a command failed while -e was being ignored, > the shell does not exit. Additionally, further down: > If a compound command or shell function executes in a context where -e > is being ignored, none of the commands executed within the compound > command or function body will be affected by the -e setting, even if > -e is set and a command returns a failure status. If a compound > command or shell function sets -e while executing in a context where > -e is ignored, that setting will not have any effect until the > compound command or the command containing the function call > completes. Thus, the only way to have our `.integration-daemon-stop` script actually run appropriately to clean up our daemon on test/script failure is to use `trap ... EXIT`, which we traditionally avoid because it does not have any stacking capabilities, but in this case is a reasonable compromise because it's going to be the only script using it (for now, at least; we can evaluate more complex solutions in the future if they actually become necessary). The alternatives were much less reasonable. One is to have the entire complex chains in any script wanting to use `.integration-daemon-start` / `.integration-daemon-stop` be chained together with `&&` in an `if` block, which is untenable. The other I could think of was taking the body of these scripts out into separate scripts, essentially meaning we'd need two files for each of these, which further complicates the maintenance. Add to that the fact that our `trap ... EXIT` is scoped to the enclosing subshell (`( ... )`) and we're in even more reasonable territory with this pattern. Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-04-17 18:19:34 -04:00
docker run --rm "$tempImage" bash -c 'cd .. && tar -c *_*' | tar -xvC "$DEST/$version"
docker rmi "$tempImage"
done
bundle .integration-daemon-stop
Fix daemon start/stop logic in hack/make/* scripts From the Bash manual's `set -e` description: (https://www.gnu.org/software/bash/manual/bashref.html#index-set) > Exit immediately if a pipeline (see Pipelines), which may consist of a > single simple command (see Simple Commands), a list (see Lists), or a > compound command (see Compound Commands) returns a non-zero status. > The shell does not exit if the command that fails is part of the > command list immediately following a while or until keyword, part of > the test in an if statement, part of any command executed in a && or > || list except the command following the final && or ||, any command > in a pipeline but the last, or if the command’s return status is being > inverted with !. If a compound command other than a subshell returns a > non-zero status because a command failed while -e was being ignored, > the shell does not exit. Additionally, further down: > If a compound command or shell function executes in a context where -e > is being ignored, none of the commands executed within the compound > command or function body will be affected by the -e setting, even if > -e is set and a command returns a failure status. If a compound > command or shell function sets -e while executing in a context where > -e is ignored, that setting will not have any effect until the > compound command or the command containing the function call > completes. Thus, the only way to have our `.integration-daemon-stop` script actually run appropriately to clean up our daemon on test/script failure is to use `trap ... EXIT`, which we traditionally avoid because it does not have any stacking capabilities, but in this case is a reasonable compromise because it's going to be the only script using it (for now, at least; we can evaluate more complex solutions in the future if they actually become necessary). The alternatives were much less reasonable. One is to have the entire complex chains in any script wanting to use `.integration-daemon-start` / `.integration-daemon-stop` be chained together with `&&` in an `if` block, which is untenable. The other I could think of was taking the body of these scripts out into separate scripts, essentially meaning we'd need two files for each of these, which further complicates the maintenance. Add to that the fact that our `trap ... EXIT` is scoped to the enclosing subshell (`( ... )`) and we're in even more reasonable territory with this pattern. Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-04-17 18:19:34 -04:00
) 2>&1 | tee -a "$DEST/test.log"