1
0
Fork 0
mirror of https://github.com/moby/moby.git synced 2022-11-09 12:21:53 -05:00
moby--moby/cmd/dockerd/config.go

114 lines
6.9 KiB
Go
Raw Normal View History

package main
import (
"runtime"
"github.com/docker/docker/daemon"
"github.com/docker/docker/daemon/config"
"github.com/docker/docker/opts"
"github.com/docker/docker/plugin/executor/containerd"
"github.com/docker/docker/registry"
"github.com/spf13/pflag"
)
const (
// defaultShutdownTimeout is the default shutdown timeout for the daemon
defaultShutdownTimeout = 15
// defaultTrustKeyFile is the default filename for the trust key
defaultTrustKeyFile = "key.json"
)
// installCommonConfigFlags adds flags to the pflag.FlagSet to configure the daemon
func installCommonConfigFlags(conf *config.Config, flags *pflag.FlagSet) error {
Adding ability to change max download attempts Moby works perfectly when you are in a situation when one has a good and stable internet connection. Operating in area's where internet connectivity is likely to be lost in undetermined intervals, like a satellite connection or 4G/LTE in rural area's, can become a problem when pulling a new image. When connection is lost while image layers are being pulled, Moby will try to reconnect up to 5 times. If this fails, the incompletely downloaded layers are lost will need to be completely downloaded again during the next pull request. This means that we are using more data than we might have to. Pulling a layer multiple times from the start can become costly over a satellite or 4G/LTE connection. As these techniques (especially 4G) quite common in IoT and Moby is used to run Azure IoT Edge devices, I would like to add a settable maximum download attempts. The maximum download attempts is currently set at 5 (distribution/xfer/download.go). I would like to change this constant to a variable that the user can set. The default will still be 5, so nothing will change from the current version unless specified when starting the daemon with the added flag or in the config file. I added a default value of 5 for DefaultMaxDownloadAttempts and a settable max-download-attempts in the daemon config file. It is also added to the config of dockerd so it can be set with a flag when starting the daemon. This value gets stored in the imageService of the daemon when it is initiated and can be passed to the NewLayerDownloadManager as a parameter. It will be stored in the LayerDownloadManager when initiated. This enables us to set the max amount of retries in makeDownoadFunc equal to the max download attempts. I also added some tests that are based on maxConcurrentDownloads/maxConcurrentUploads. You can pull this version and test in a development container. Either create a config `file /etc/docker/daemon.json` with `{"max-download-attempts"=3}``, or use `dockerd --max-download-attempts=3 -D &` to start up the dockerd. Start downloading a container and disconnect from the internet whilst downloading. The result would be that it stops pulling after three attempts. Signed-off-by: Lukas Heeren <lukas-heeren@hotmail.com> Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
2019-06-25 09:26:36 -04:00
var maxConcurrentDownloads, maxConcurrentUploads, maxDownloadAttempts int
defaultPidFile, err := getDefaultPidFile()
if err != nil {
return err
}
defaultDataRoot, err := getDefaultDataRoot()
if err != nil {
return err
}
defaultExecRoot, err := getDefaultExecRoot()
if err != nil {
return err
}
installRegistryServiceFlags(&conf.ServiceOptions, flags)
flags.Var(opts.NewNamedListOptsRef("storage-opts", &conf.GraphOptions, nil), "storage-opt", "Storage driver options")
flags.Var(opts.NewNamedListOptsRef("authorization-plugins", &conf.AuthorizationPlugins, nil), "authorization-plugin", "Authorization plugins to load")
flags.Var(opts.NewNamedListOptsRef("exec-opts", &conf.ExecOptions, nil), "exec-opt", "Runtime execution options")
flags.StringVarP(&conf.Pidfile, "pidfile", "p", defaultPidFile, "Path to use for daemon PID file")
flags.StringVarP(&conf.Root, "graph", "g", defaultDataRoot, "Root of the Docker runtime")
flags.StringVar(&conf.ExecRoot, "exec-root", defaultExecRoot, "Root directory for execution state files")
flags.StringVar(&conf.ContainerdAddr, "containerd", "", "containerd grpc address")
flags.BoolVar(&conf.CriContainerd, "cri-containerd", false, "start containerd with cri")
// "--graph" is "soft-deprecated" in favor of "data-root". This flag was added
// before Docker 1.0, so won't be removed, only hidden, to discourage its usage.
_ = flags.MarkHidden("graph")
flags.StringVar(&conf.Root, "data-root", defaultDataRoot, "Root directory of persistent Docker state")
flags.BoolVarP(&conf.AutoRestart, "restart", "r", true, "--restart on the daemon has been deprecated in favor of --restart policies on docker run")
_ = flags.MarkDeprecated("restart", "Please use a restart policy on docker run")
// Windows doesn't support setting the storage driver - there is no choice as to which ones to use.
if runtime.GOOS != "windows" {
flags.StringVarP(&conf.GraphDriver, "storage-driver", "s", "", "Storage driver to use")
}
flags.IntVar(&conf.Mtu, "mtu", 0, "Set the containers network MTU")
flags.BoolVar(&conf.RawLogs, "raw-logs", false, "Full timestamps without ANSI coloring")
flags.Var(opts.NewListOptsRef(&conf.DNS, opts.ValidateIPAddress), "dns", "DNS server to use")
flags.Var(opts.NewNamedListOptsRef("dns-opts", &conf.DNSOptions, nil), "dns-opt", "DNS options to use")
flags.Var(opts.NewListOptsRef(&conf.DNSSearch, opts.ValidateDNSSearch), "dns-search", "DNS search domains to use")
flags.Var(opts.NewIPOpt(&conf.HostGatewayIP, ""), "host-gateway-ip", "IP address that the special 'host-gateway' string in --add-host resolves to. Defaults to the IP address of the default bridge")
flags.Var(opts.NewNamedListOptsRef("labels", &conf.Labels, opts.ValidateLabel), "label", "Set key=value labels to the daemon")
flags.StringVar(&conf.LogConfig.Type, "log-driver", "json-file", "Default driver for container logs")
flags.Var(opts.NewNamedMapOpts("log-opts", conf.LogConfig.Config, nil), "log-opt", "Default log driver options for containers")
flags.StringVar(&conf.ClusterAdvertise, "cluster-advertise", "", "Address or interface name to advertise")
_ = flags.MarkDeprecated("cluster-advertise", "Swarm classic is deprecated. Please use Swarm-mode (docker swarm init)")
flags.StringVar(&conf.ClusterStore, "cluster-store", "", "URL of the distributed storage backend")
_ = flags.MarkDeprecated("cluster-store", "Swarm classic is deprecated. Please use Swarm-mode (docker swarm init)")
flags.Var(opts.NewNamedMapOpts("cluster-store-opts", conf.ClusterOpts, nil), "cluster-store-opt", "Set cluster store options")
_ = flags.MarkDeprecated("cluster-store-opt", "Swarm classic is deprecated. Please use Swarm-mode (docker swarm init)")
flags.StringVar(&conf.CorsHeaders, "api-cors-header", "", "Set CORS headers in the Engine API")
flags.IntVar(&maxConcurrentDownloads, "max-concurrent-downloads", config.DefaultMaxConcurrentDownloads, "Set the max concurrent downloads for each pull")
flags.IntVar(&maxConcurrentUploads, "max-concurrent-uploads", config.DefaultMaxConcurrentUploads, "Set the max concurrent uploads for each push")
Adding ability to change max download attempts Moby works perfectly when you are in a situation when one has a good and stable internet connection. Operating in area's where internet connectivity is likely to be lost in undetermined intervals, like a satellite connection or 4G/LTE in rural area's, can become a problem when pulling a new image. When connection is lost while image layers are being pulled, Moby will try to reconnect up to 5 times. If this fails, the incompletely downloaded layers are lost will need to be completely downloaded again during the next pull request. This means that we are using more data than we might have to. Pulling a layer multiple times from the start can become costly over a satellite or 4G/LTE connection. As these techniques (especially 4G) quite common in IoT and Moby is used to run Azure IoT Edge devices, I would like to add a settable maximum download attempts. The maximum download attempts is currently set at 5 (distribution/xfer/download.go). I would like to change this constant to a variable that the user can set. The default will still be 5, so nothing will change from the current version unless specified when starting the daemon with the added flag or in the config file. I added a default value of 5 for DefaultMaxDownloadAttempts and a settable max-download-attempts in the daemon config file. It is also added to the config of dockerd so it can be set with a flag when starting the daemon. This value gets stored in the imageService of the daemon when it is initiated and can be passed to the NewLayerDownloadManager as a parameter. It will be stored in the LayerDownloadManager when initiated. This enables us to set the max amount of retries in makeDownoadFunc equal to the max download attempts. I also added some tests that are based on maxConcurrentDownloads/maxConcurrentUploads. You can pull this version and test in a development container. Either create a config `file /etc/docker/daemon.json` with `{"max-download-attempts"=3}``, or use `dockerd --max-download-attempts=3 -D &` to start up the dockerd. Start downloading a container and disconnect from the internet whilst downloading. The result would be that it stops pulling after three attempts. Signed-off-by: Lukas Heeren <lukas-heeren@hotmail.com> Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
2019-06-25 09:26:36 -04:00
flags.IntVar(&maxDownloadAttempts, "max-download-attempts", config.DefaultDownloadAttempts, "Set the max download attempts for each pull")
flags.IntVar(&conf.ShutdownTimeout, "shutdown-timeout", defaultShutdownTimeout, "Set the default shutdown timeout")
flags.IntVar(&conf.NetworkDiagnosticPort, "network-diagnostic-port", 0, "TCP port number of the network diagnostic server")
_ = flags.MarkHidden("network-diagnostic-port")
flags.StringVar(&conf.SwarmDefaultAdvertiseAddr, "swarm-default-advertise-addr", "", "Set default address or interface for swarm advertised address")
flags.BoolVar(&conf.Experimental, "experimental", false, "Enable experimental features")
flags.StringVar(&conf.MetricsAddress, "metrics-addr", "", "Set default address and port to serve the metrics api on")
flags.Var(opts.NewNamedListOptsRef("node-generic-resources", &conf.NodeGenericResources, opts.ValidateSingleGenericResource), "node-generic-resource", "Advertise user-defined resource")
flags.IntVar(&conf.NetworkControlPlaneMTU, "network-control-plane-mtu", config.DefaultNetworkMtu, "Network Control plane MTU")
conf.MaxConcurrentDownloads = &maxConcurrentDownloads
conf.MaxConcurrentUploads = &maxConcurrentUploads
Adding ability to change max download attempts Moby works perfectly when you are in a situation when one has a good and stable internet connection. Operating in area's where internet connectivity is likely to be lost in undetermined intervals, like a satellite connection or 4G/LTE in rural area's, can become a problem when pulling a new image. When connection is lost while image layers are being pulled, Moby will try to reconnect up to 5 times. If this fails, the incompletely downloaded layers are lost will need to be completely downloaded again during the next pull request. This means that we are using more data than we might have to. Pulling a layer multiple times from the start can become costly over a satellite or 4G/LTE connection. As these techniques (especially 4G) quite common in IoT and Moby is used to run Azure IoT Edge devices, I would like to add a settable maximum download attempts. The maximum download attempts is currently set at 5 (distribution/xfer/download.go). I would like to change this constant to a variable that the user can set. The default will still be 5, so nothing will change from the current version unless specified when starting the daemon with the added flag or in the config file. I added a default value of 5 for DefaultMaxDownloadAttempts and a settable max-download-attempts in the daemon config file. It is also added to the config of dockerd so it can be set with a flag when starting the daemon. This value gets stored in the imageService of the daemon when it is initiated and can be passed to the NewLayerDownloadManager as a parameter. It will be stored in the LayerDownloadManager when initiated. This enables us to set the max amount of retries in makeDownoadFunc equal to the max download attempts. I also added some tests that are based on maxConcurrentDownloads/maxConcurrentUploads. You can pull this version and test in a development container. Either create a config `file /etc/docker/daemon.json` with `{"max-download-attempts"=3}``, or use `dockerd --max-download-attempts=3 -D &` to start up the dockerd. Start downloading a container and disconnect from the internet whilst downloading. The result would be that it stops pulling after three attempts. Signed-off-by: Lukas Heeren <lukas-heeren@hotmail.com> Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
2019-06-25 09:26:36 -04:00
conf.MaxDownloadAttempts = &maxDownloadAttempts
flags.StringVar(&conf.ContainerdNamespace, "containerd-namespace", daemon.ContainersNamespace, "Containerd namespace to use")
flags.StringVar(&conf.ContainerdPluginNamespace, "containerd-plugins-namespace", containerd.PluginNamespace, "Containerd namespace to use for plugins")
return nil
}
func installRegistryServiceFlags(options *registry.ServiceOptions, flags *pflag.FlagSet) {
ana := opts.NewNamedListOptsRef("allow-nondistributable-artifacts", &options.AllowNondistributableArtifacts, registry.ValidateIndexName)
mirrors := opts.NewNamedListOptsRef("registry-mirrors", &options.Mirrors, registry.ValidateMirror)
insecureRegistries := opts.NewNamedListOptsRef("insecure-registries", &options.InsecureRegistries, registry.ValidateIndexName)
flags.Var(ana, "allow-nondistributable-artifacts", "Allow push of nondistributable artifacts to registry")
flags.Var(mirrors, "registry-mirror", "Preferred Docker registry mirror")
flags.Var(insecureRegistries, "insecure-registry", "Enable insecure registry communication")
}