mirror of
https://github.com/moby/moby.git
synced 2022-11-09 12:21:53 -05:00
Fix several typos on macvlan docs
Signed-off-by: Erich Cordoba <erich.cm@yandex.com>
This commit is contained in:
Erich Cordoba
parent
d8ef832bc1
commit
829a4ee4be
1 changed files with 25 additions and 26 deletions
|
|
@ -7,13 +7,13 @@ The Macvlan driver provides operators the ability to integrate Docker networking
|
|||
|
||||
The Linux implementation is considered lightweight because it eliminates the need for using a Linux bridge for isolating containers on the Docker host. The VLAN driver requires full access to the underlying host making it suitable for Enterprise data centers that have administrative access to the host.
|
||||
|
||||
Instead of attaching container network interfaces to a Docker host Linux bridge for a network, the driver simply connects the container interface to the Docker Host Ethernet interface (or sub-interface). Each network is attached to a unique parent interface. Containers in a network share a common broadcast domain and intra-network connectivity is permitted. Two seperate networks will each have a unique parent interface and that parent is what enforces datapath isolation between two networks. In order for inter-network communications to occour, an IP router, external to the Docker host, is required to route between the two networks by hair-pining into the physical network and then back to the Docker host. While hairpinning traffic can be less efficient then east/west traffic staying local to the host, there is often more complexity associated with desiagregating services to the host. It can be practical for some users to leverage existing network services, such firewalls and load balancers that already exist in a data center architecture.
|
||||
Instead of attaching container network interfaces to a Docker host Linux bridge for a network, the driver simply connects the container interface to the Docker Host Ethernet interface (or sub-interface). Each network is attached to a unique parent interface. Containers in a network share a common broadcast domain and intra-network connectivity is permitted. Two separate networks will each have a unique parent interface and that parent is what enforces datapath isolation between two networks. In order for inter-network communications to occur, an IP router, external to the Docker host, is required to route between the two networks by hair-pining into the physical network and then back to the Docker host. While hairpinning traffic can be less efficient then east/west traffic staying local to the host, there is often more complexity associated with disaggregating services to the host. It can be practical for some users to leverage existing network services, such firewalls and load balancers that already exist in a data center architecture.
|
||||
|
||||
When using traditional Linux bridges there are two common techniques to get traffic out of a container and into the physical network and vice versa. The first method to connect containers to the underlying network is to use Iptable rules which perform a NAT translation from a bridge that represents the Docker network to the physical Ethernet connection such as `eth0`. The upside of Iptables using the Docker built-in bridge driver is that the NIC does not have to be in promiscous mode. The second bridge driver method is to move a host's external Ethernet connection into the bridge. Moving the host Ethernet connection can at times be unforgiving. Common mistakes such as cutting oneself off from the host, or worse, creating bridging loops that can cripple a VLAN throughout a data center can open a network design up to potential risks as the infrastructure grows.
|
||||
When using traditional Linux bridges there are two common techniques to get traffic out of a container and into the physical network and vice versa. The first method to connect containers to the underlying network is to use Iptable rules which perform a NAT translation from a bridge that represents the Docker network to the physical Ethernet connection such as `eth0`. The upside of Iptables using the Docker built-in bridge driver is that the NIC does not have to be in promiscuous mode. The second bridge driver method is to move a host's external Ethernet connection into the bridge. Moving the host Ethernet connection can at times be unforgiving. Common mistakes such as cutting oneself off from the host, or worse, creating bridging loops that can cripple a VLAN throughout a data center can open a network design up to potential risks as the infrastructure grows.
|
||||
|
||||
Connecting containers without any NATing is where the VLAN drivers accel. Rather then having to manage a bridge for each Docker network containers are connected directly to a `parent` interface such as `eth0` that attaches the container to the same broadcast domain as the parent interface. A simple example is if a host's `eth0` is on the network `192.168.1.0/24` with a gateway of `192.168.1.1` then a Macvlan Docker network can start containers on the addresses `192.168.1.2 - 192.168.1.254`. Containers use the same network as the parent `-o parent` that is specified in the `docker network create` command.
|
||||
|
||||
There are positive performance implication as a result of bypassing the Linux bridge, along with the simplicity of less moving parts, which is also attractive. Macvlan containers are easy to troubleshoot. The actual MAC and IP address of the container is bridged into the upstream network making a problematic application easy for operators to trace from the network. Existing underlay network management and monitoring tools remain relevant.
|
||||
There are positive performance implication as a result of bypassing the Linux bridge, along with the simplicity of less moving parts, which is also attractive. Macvlan containers are easy to troubleshoot. The actual MAC and IP address of the container is bridged into the upstream network making a problematic application easy for operators to trace from the network. Existing underlay network management and monitoring tools remain relevant.
|
||||
|
||||
### Pre-Requisites
|
||||
|
||||
|
|
@ -28,17 +28,17 @@ There are positive performance implication as a result of bypassing the Linux br
|
|||
|
||||
### MacVlan Bridge Mode Example Usage
|
||||
|
||||
- Macvlan driver networks are attached to a parent Docker host interface. Examples are a physical interface such as `eth0`, a sub-interface for 802.1q VLAN tagging like `eth0.10` (`.10` representing VLAN `10`) or even bonded `bond0` host adaptors which bundle two Ethernet interfaces into a single logical interface and provide diversity in the server connection.
|
||||
- Macvlan driver networks are attached to a parent Docker host interface. Examples are a physical interface such as `eth0`, a sub-interface for 802.1q VLAN tagging like `eth0.10` (`.10` representing VLAN `10`) or even bonded `bond0` host adapters which bundle two Ethernet interfaces into a single logical interface and provide diversity in the server connection.
|
||||
|
||||
- The specified gateway is external to the host that is expected to be provided by the network infrastructure. If a gateway is not specified using the `--gateway` paramter, then Libnetwork will infer the first usable address of a subnet. For example, if a network's subnet is `--subnet 10.1.100.0/24` and no gateway is specified, Libnetwork will assign a gateway of `10.1.100.1` to the container. A second example would be a subnet of `--subnet 10.1.100.128/25` would receive a gateway of `10.1.100.129`.
|
||||
- The specified gateway is external to the host that is expected to be provided by the network infrastructure. If a gateway is not specified using the `--gateway` parameter, then Libnetwork will infer the first usable address of a subnet. For example, if a network's subnet is `--subnet 10.1.100.0/24` and no gateway is specified, Libnetwork will assign a gateway of `10.1.100.1` to the container. A second example would be a subnet of `--subnet 10.1.100.128/25` would receive a gateway of `10.1.100.129`.
|
||||
|
||||
- Containers on separate networks cannot reach one another without an external process routing between the two networks/subnets.
|
||||
|
||||
- Each Macvlan Bridge mode Docker network is isolated from one another and there can be only one network attached to a parent interface at a time. There is a theoretical limit of 4,094 sub-interfaces per host adaptor that a Docker network could be attached to.
|
||||
- Each Macvlan Bridge mode Docker network is isolated from one another and there can be only one network attached to a parent interface at a time. There is a theoretical limit of 4,094 sub-interfaces per host adapter that a Docker network could be attached to.
|
||||
|
||||
- The driver limits one network per parent interface. The driver does however accommodate secondary subnets to be allocated in a single Docker network for a multi-subnet requirement. The upstream router is responsible for proxy-arping between the two subnets.
|
||||
|
||||
- Any Macvlan container sharing the same subnet can communicate via IP to any other container in the same subnet without a gateway. It is important to note, that the parent will go into promiscous mode when a container is attached to the parent since each container has a unique MAC address. Alternatively, Ipvlan which is currently a experimental driver uses the same MAC address as the parent interface and thus precluding the need for the parent being promiscous.
|
||||
- Any Macvlan container sharing the same subnet can communicate via IP to any other container in the same subnet without a gateway. It is important to note, that the parent will go into promiscuous mode when a container is attached to the parent since each container has a unique MAC address. Alternatively, Ipvlan which is currently a experimental driver uses the same MAC address as the parent interface and thus precluding the need for the parent being promiscuous.
|
||||
|
||||
In the following example, `eth0` on the docker host has an IP on the `172.16.86.0/24` network and a default gateway of `172.16.86.1`. The gateway is an external router with an address of `172.16.86.1`. An IP address is not required on the Docker host interface `eth0` in `bridge` mode, it merely needs to be on the proper upstream network to get forwarded by a network switch or network router.
|
||||
|
||||
|
|
@ -46,7 +46,7 @@ In the following example, `eth0` on the docker host has an IP on the `172.16.86.
|
|||
|
||||
**Note** The Docker network subnet specified needs to match the network that parent interface of the Docker host for external communications. For example, use the same subnet and gateway of the Docker host ethernet interface specified by the `-o parent=` option. The parent interface is not required to have a IP address assigned to it, since this is simply L2 flooding and learning.
|
||||
|
||||
- The parent interface used in this example is `eth0` and it is on the subnet `172.16.86.0/24`. The containers in the `docker network` will also need to be on this same subnet as the parent `-o parent=`. The gateway is an external router on the network.
|
||||
- The parent interface used in this example is `eth0` and it is on the subnet `172.16.86.0/24`. The containers in the `docker network` will also need to be on this same subnet as the parent `-o parent=`. The gateway is an external router on the network.
|
||||
|
||||
- Libnetwork driver types are specified with the `-d <driver_name>` option. In this case `-d macvlan`
|
||||
|
||||
|
|
@ -84,7 +84,7 @@ ip a show eth0
|
|||
eth0@if3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UNKNOWN
|
||||
link/ether 46:b2:6b:26:2f:69 brd ff:ff:ff:ff:ff:ff
|
||||
inet 172.16.86.2/24 scope global eth0
|
||||
|
||||
|
||||
ip route
|
||||
default via 172.16.86.1 dev eth0
|
||||
172.16.86.0/24 dev eth0 src 172.16.86.2
|
||||
|
|
@ -97,7 +97,7 @@ ip route
|
|||
|
||||
Users can explicitly specify the `bridge` mode option `-o macvlan_mode=bridge` or leave the mode option out since the most common mode of `bridge` is the driver default.
|
||||
|
||||
While the `eth0` interface does not need to have an IP address, it is not uncommon to have an IP address on the interface. Addresses can be excluded from getting an address from the default built in IPAM by using the `--aux-address=x.x.x.x` argument. This will blacklist the specified address from being handed out to containers from the built-in Libnetwork IPAM.
|
||||
While the `eth0` interface does not need to have an IP address, it is not uncommon to have an IP address on the interface. Addresses can be excluded from getting an address from the default built in IPAM by using the `--aux-address=x.x.x.x` argument. This will blacklist the specified address from being handed out to containers from the built-in Libnetwork IPAM.
|
||||
|
||||
- The following is the same network example as above, but blacklisting the `-o parent=eth0` address from being handed out to a container.
|
||||
|
||||
|
|
@ -109,7 +109,7 @@ docker network create -d macvlan \
|
|||
-o parent=eth0 pub_net
|
||||
```
|
||||
|
||||
Another option for specifying what subpool or range of usable addresses is used by the default Docker IPAM driver is to use the argument `--ip-range=`. This instructs the driver to allocate container addresses from the specific range, rather then the broader range from the `--subnet=` argument.
|
||||
Another option for specifying what subpool or range of usable addresses is used by the default Docker IPAM driver is to use the argument `--ip-range=`. This instructs the driver to allocate container addresses from the specific range, rather then the broader range from the `--subnet=` argument.
|
||||
|
||||
- The network create in the following example, allocates addresses beginning at `192.168.32.128` and increments n+1 upwards from there.
|
||||
|
||||
|
|
@ -146,7 +146,7 @@ Trunking 802.1q to a Linux host is notoriously painful for operations. It requir
|
|||
|
||||
Like all of the Docker network drivers, the overarching goal is to alleviate the operational pains of managing network resources. To that end, when a network receives a sub-interface as the parent that does not exist, the drivers create the VLAN tagged interfaces while creating the network. If the sub-interface already exists it is simply used as is.
|
||||
|
||||
In the case of a host reboot, instead of needing to modify often complex network configuration files the driver will recreate all network links when the Docker daemon restarts. The driver tracks if it created the VLAN tagged sub-interface originally with the network create and will **only** recreate the sub-interface after a restart if it created the link in the first place.
|
||||
In the case of a host reboot, instead of needing to modify often complex network configuration files the driver will recreate all network links when the Docker daemon restarts. The driver tracks if it created the VLAN tagged sub-interface originally with the network create and will **only** recreate the sub-interface after a restart if it created the link in the first place.
|
||||
|
||||
The same holds true if the network is deleted `docker network rm`. If driver created the sub-interface with `docker network create` it will remove the sub-interface link for the operator.
|
||||
|
||||
|
|
@ -156,7 +156,7 @@ For the driver to add/delete the vlan sub-interfaces the format needs to be `-o
|
|||
|
||||
For example: `-o parent eth0.50` denotes a parent interface of `eth0` with a slave of `eth0.50` tagged with vlan id `50`. The equivalent `ip link` command would be `ip link add link eth0 name eth0.50 type vlan id 50`.
|
||||
|
||||
Replace the `macvlan` with `ipvlan` in the `-d` driver argument to create macvlan 802.1q trunks.
|
||||
Replace the `macvlan` with `ipvlan` in the `-d` driver argument to create macvlan 802.1q trunks.
|
||||
|
||||
**Vlan ID 50**
|
||||
|
||||
|
|
@ -179,7 +179,7 @@ docker run --net=macvlan50 -it --name macvlan_test6 --rm alpine /bin/sh
|
|||
In the second network, tagged and isolated by the Docker host, `eth0.60` is the parent interface tagged with vlan id `60` specified with `-o parent=eth0.60`. The `macvlan_mode=` defaults to `macvlan_mode=bridge`. It can also be explicitly set with the same result, as shown in the next example.
|
||||
|
||||
```
|
||||
# now add networks and hosts as you would normally by attaching to the master (sub)interface that is tagged.
|
||||
# now add networks and hosts as you would normally by attaching to the master (sub)interface that is tagged.
|
||||
docker network create -d macvlan \
|
||||
--subnet=192.168.60.0/24 \
|
||||
--gateway=192.168.60.1 \
|
||||
|
|
@ -193,7 +193,7 @@ docker run --net=macvlan60 -it --name macvlan_test8 --rm alpine /bin/sh
|
|||
|
||||
**Example:** Multi-Subnet Macvlan 802.1q Trunking
|
||||
|
||||
The same as the example before except there is an additional subnet bound to the network that the user can choose to provision containers on. In MacVlan/Bridge mode, containers can only ping one another if they are on the same subnet/broadcast domain unless there is an external router that routes the traffic (answers ARP etc) between the two subnets. Multiple subnets assigned to a network require a gateway external to the host that falls within the subnet range to hairpin the traffic back to the host.
|
||||
The same as the example before except there is an additional subnet bound to the network that the user can choose to provision containers on. In MacVlan/Bridge mode, containers can only ping one another if they are on the same subnet/broadcast domain unless there is an external router that routes the traffic (answers ARP etc) between the two subnets. Multiple subnets assigned to a network require a gateway external to the host that falls within the subnet range to hairpin the traffic back to the host.
|
||||
|
||||
|
||||
```
|
||||
|
|
@ -223,7 +223,7 @@ docker network rm $(docker network ls -q)
|
|||
ip link
|
||||
```
|
||||
|
||||
Hosts on the same VLAN are typically on the same subnet and almost always are grouped together based on their security policy. In most scenarios, a multi-tier application is tiered into different subnets because the security profile of each process requires some form of isolation. For example, hosting your credit card processing on the same virtual network as the front-end web-server would be a regulatory compliance issue, along with circumventing the long standing best practice of layered defense in depth architectures. VLANs or the equivelant VNI (Virtual Network Identifier) when using the built-in Overlay driver, are the first step in isolating tenant traffic.
|
||||
Hosts on the same VLAN are typically on the same subnet and almost always are grouped together based on their security policy. In most scenarios, a multi-tier application is tiered into different subnets because the security profile of each process requires some form of isolation. For example, hosting your credit card processing on the same virtual network as the front-end web-server would be a regulatory compliance issue, along with circumventing the long standing best practice of layered defense in depth architectures. VLANs or the equivalent VNI (Virtual Network Identifier) when using the built-in Overlay driver, are the first step in isolating tenant traffic.
|
||||
|
||||
|
||||
|
||||
|
|
@ -234,7 +234,7 @@ The following specifies both v4 and v6 addresses. An address from each family wi
|
|||
|
||||
*Note on IPv6:* When declaring a v6 subnet with a `docker network create`, the flag `--ipv6` is required along with the subnet (in the following example `--subnet=2001:db8:abc8::/64`). Similar to IPv4 functionality, if a IPv6 `--gateway` is not specified, the first usable address in the v6 subnet is inferred and assigned as the gateway for the broadcast domain.
|
||||
|
||||
The following example creates a network with multiple IPv4 and IPv6 subnets. The network is attached to a sub-interface of `eth0.218`. By specifying `eth0.218` as the parent, the driver will create the sub-interface (if it does not already exist) and tag all traffic for containers in the network with a VLAN ID of 218. The physical switch port on the ToR (top of rack) network port needs to have 802.1Q trunking enabled for communications in and out of the host to work.
|
||||
The following example creates a network with multiple IPv4 and IPv6 subnets. The network is attached to a sub-interface of `eth0.218`. By specifying `eth0.218` as the parent, the driver will create the sub-interface (if it does not already exist) and tag all traffic for containers in the network with a VLAN ID of 218. The physical switch port on the ToR (top of rack) network port needs to have 802.1Q trunking enabled for communications in and out of the host to work.
|
||||
|
||||
```
|
||||
# Create multiple subnets w/ dual stacks:
|
||||
|
|
@ -293,13 +293,13 @@ root@526f3060d759:/# ip a show eth0
|
|||
$ ip route
|
||||
default via 192.168.216.1 dev eth0
|
||||
192.168.216.0/24 dev eth0 src 192.168.216.11
|
||||
|
||||
|
||||
# Specified v6 gateway of 2001:db8:abc8::10
|
||||
$ ip -6 route
|
||||
2001:db8:abc4::/64 dev eth0 proto kernel metric 256
|
||||
2001:db8:abc8::/64 dev eth0 proto kernel metric 256
|
||||
default via 2001:db8:abc8::10 dev eth0 metric 1024
|
||||
|
||||
|
||||
#Containers can have both v4 and v6 addresses assigned to their interfaces or
|
||||
# Both v4 and v6 addresses can be assigned to the container's interface
|
||||
docker run --net=macvlan216 --ip=192.168.216.50 --ip6=2001:db8:abc8::50 -it --rm alpine /bin/sh
|
||||
|
|
@ -327,7 +327,7 @@ docker network create -d macvlan \
|
|||
--aux-address="reserved2=192.168.136.2" \
|
||||
--aux-address="reserved3=192.168.138.2" \
|
||||
-o parent=eth0 mcv0
|
||||
|
||||
|
||||
docker run --net=mcv0 -it --rm alpine /bin/sh
|
||||
```
|
||||
|
||||
|
|
@ -344,7 +344,7 @@ ip address show eth0
|
|||
valid_lft forever preferred_lft forever
|
||||
inet6 fe80::42:c0ff:fea8:8803/64 scope link
|
||||
valid_lft forever preferred_lft forever
|
||||
|
||||
|
||||
# IPv4 routing table from within the container
|
||||
$ ip route
|
||||
default via 192.168.136.1 dev eth0
|
||||
|
|
@ -365,16 +365,16 @@ An example being, NetOps provides VLAN ID and the associated subnets for VLANs b
|
|||
|
||||
- VLAN: 10, Subnet: 172.16.80.0/24, Gateway: 172.16.80.1
|
||||
|
||||
- `--subnet=172.16.80.0/24 --gateway=172.16.80.1 -o parent=eth0.10`
|
||||
- `--subnet=172.16.80.0/24 --gateway=172.16.80.1 -o parent=eth0.10`
|
||||
|
||||
- VLAN: 20, IP subnet: 172.16.50.0/22, Gateway: 172.16.50.1
|
||||
|
||||
- `--subnet=172.16.50.0/22 --gateway=172.16.50.1 -o parent=eth0.20 `
|
||||
- `--subnet=172.16.50.0/22 --gateway=172.16.50.1 -o parent=eth0.20`
|
||||
|
||||
- VLAN: 30, Subnet: 10.1.100.0/16, Gateway: 10.1.100.1
|
||||
|
||||
- `--subnet=10.1.100.0/16 --gateway=10.1.100.1 -o parent=eth0.30`
|
||||
|
||||
- `--subnet=10.1.100.0/16 --gateway=10.1.100.1 -o parent=eth0.30`
|
||||
|
||||
### Manually Creating 802.1q Links
|
||||
|
||||
If a user does not want the driver to create the vlan sub-interface it simply needs to exist prior to the `docker network create`. If you have sub-interface naming that is not `interface.vlan_id` it is honored in the `-o parent=` option again as long as the interface exists and us up.
|
||||
|
|
@ -425,4 +425,3 @@ ip link del foo
|
|||
```
|
||||
|
||||
As with all of the Libnetwork drivers, networks of various driver types can be mixed and matched. This even applies to 3rd party ecosystem drivers that can be run in parallel with built-in drivers for maximum flexibility to the user.
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue