From 7a5db6df995a131579020fd2cbacd49cb82e0aea Mon Sep 17 00:00:00 2001
From: Andrew Weiss <andrew.weiss@outlook.com>
Date: Fri, 25 Jul 2014 14:28:36 -0400
Subject: [PATCH] updated article to reflect changes in config; fixed
 hyperlinks #7243

Docker-DCO-1.1-Signed-off-by: Andrew Weiss <andrew.weiss@outlook.com> (github: anweiss)
---
 docs/sources/articles/dsc.md | 92 ++++++++++++++++++++++++++++--------
 1 file changed, 71 insertions(+), 21 deletions(-)

diff --git a/docs/sources/articles/dsc.md b/docs/sources/articles/dsc.md
index 94f5e9d4db..5e05c40c14 100644
--- a/docs/sources/articles/dsc.md
+++ b/docs/sources/articles/dsc.md
@@ -8,7 +8,7 @@ Windows PowerShell Desired State Configuration (DSC) is a configuration
 management tool that extends the existing functionality of Windows PowerShell.
 DSC uses a declarative syntax to define the state in which a target should be
 configured. More information about PowerShell DSC can be found at
-http://technet.microsoft.com/en-us/library/dn249912.aspx.
+[http://technet.microsoft.com/en-us/library/dn249912.aspx](http://technet.microsoft.com/en-us/library/dn249912.aspx).
 
 ## Requirements
 
@@ -17,14 +17,14 @@ To use this guide you'll need a Windows host with PowerShell v4.0 or newer.
 The included DSC configuration script also uses the official PPA so
 only an Ubuntu target is supported. The Ubuntu target must already have the
 required OMI Server and PowerShell DSC for Linux providers installed. More
-information can be found at https://github.com/MSFTOSSMgmt/WPSDSCLinux. The
-source repository listed below also includes PowerShell DSC for Linux
+information can be found at [https://github.com/MSFTOSSMgmt/WPSDSCLinux](https://github.com/MSFTOSSMgmt/WPSDSCLinux).
+The source repository listed below also includes PowerShell DSC for Linux
 installation and init scripts along with more detailed installation information.
 
 ## Installation
 
 The DSC configuration example source is available in the following repository:
-https://github.com/anweiss/DockerClientDSC. It can be cloned with:
+[https://github.com/anweiss/DockerClientDSC](https://github.com/anweiss/DockerClientDSC). It can be cloned with:
 
     $ git clone https://github.com/anweiss/DockerClientDSC.git
 
@@ -37,15 +37,18 @@ be used to establish the required CIM session(s) and execute the
 `Set-DscConfiguration` cmdlet.
 
 More detailed usage information can be found at
-https://github.com/anweiss/DockerClientDSC.
+[https://github.com/anweiss/DockerClientDSC](https://github.com/anweiss/DockerClientDSC).
 
-### Run Configuration
+### Install Docker
 The Docker installation configuration is equivalent to running:
 
 ```
-apt-get install docker.io
-ln -sf /usr/bin/docker.io /usr/local/bin/docker
-sed -i '$acomplete -F _docker docker' /etc/bash_completion.d/docker.io
+apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys\
+36A1D7869245C8950F966E92D8576A8BA88D21E9
+sh -c "echo deb https://get.docker.io/ubuntu docker main\
+> /etc/apt/sources.list.d/docker.list"
+apt-get update
+apt-get install lxc-docker
 ```
 
 Ensure that your current working directory is set to the `DockerClientDSC`
@@ -83,35 +86,82 @@ file and execute configurations against multiple nodes as such:
 ```
 
 ### Images
-Image configuration is equivalent to running: `docker pull [image]`.
+Image configuration is equivalent to running: `docker pull [image]` or
+`docker rmi -f [IMAGE]`.
 
-Using the same Run Configuration steps defined above, execute `DockerClient`
-with the `Image` parameter:
+Using the same steps defined above, execute `DockerClient` with the `Image`
+parameter and apply the configuration:
 
 ```powershell
-DockerClient -Hostname "myhost" -Image node
+DockerClient -Hostname "myhost" -Image "node"
+.\RunDockerClientConfig.ps1 -Hostname "myhost"
 ```
 
-The configuration process can be initiated as before:
+You can also configure the host to pull multiple images:
 
 ```powershell
+DockerClient -Hostname "myhost" -Image "node","mongo"
 .\RunDockerClientConfig.ps1 -Hostname "myhost"
 ```
 
+To remove images, use a hashtable as follows:
+
+```powershell
+DockerClient -Hostname "myhost" -Image @{Name="node"; Remove=$true}
+.\RunDockerClientConfig.ps1 -Hostname $hostname
+```
+
 ### Containers
 Container configuration is equivalent to running:
-`docker run -d --name="[containername]" [image] '[command]'`.
 
-Using the same Run Configuration steps defined above, execute `DockerClient`
-with the `Image`, `ContainerName`, and `Command` parameters:
+```
+docker run -d --name="[containername]" -p '[port]' -e '[env]' --link '[link]'\
+'[image]' '[command]'
+```
+or
 
-```powershell
-DockerClient -Hostname "myhost" -Image node -ContainerName "helloworld" `
--Command 'echo "Hello World!"'
+```
+docker rm -f [containername]
 ```
 
-The configuration process can be initiated as before:
+To create or remove containers, you can use the `Container` parameter with one
+or more hashtables. The hashtable(s) passed to this parameter can have the
+following properties:
+
+- Name (required)
+- Image (required unless Remove property is set to `$true`)
+- Port
+- Env
+- Link
+- Command
+- Remove
+
+For example, create a hashtable with the settings for your container:
 
 ```powershell
+$webContainer = @{Name="web"; Image="anweiss/docker-platynem"; Port="80:80"}
+```
+
+Then, using the same steps defined above, execute
+`DockerClient` with the `-Image` and `-Container` parameters:
+
+```powershell
+DockerClient -Hostname "myhost" -Image node -Container $webContainer
 .\RunDockerClientConfig.ps1 -Hostname "myhost"
 ```
+
+Existing containers can also be removed as follows:
+
+```powershell
+$containerToRemove = @{Name="web"; Remove=$true}
+DockerClient -Hostname "myhost" -Container $containerToRemove
+.\RunDockerClientConfig.ps1 -Hostname "myhost"
+```
+
+Here is a hashtable with all of the properties that can be used to create a
+container:
+
+```powershell
+$containerProps = @{Name="web"; Image="node:latest"; Port="80:80"; `
+Env="PORT=80"; Link="db:db"; Command="grunt"}
+```
\ No newline at end of file