testutils.SetupTestOSContext() sets the calling thread's network
namespace but neglected to restore it on teardown. This was not a
problem in practice as it called runtime.LockOSThread() twice but
runtime.UnlockOSThread() only once, so the tampered threads would be
terminated by the runtime when the test case returned and replaced with
a clean thread. Correct the utility so it restores the thread's network
namespace during teardown and unlocks the goroutine from the thread on
success.
Remove unnecessary runtime.LockOSThread() calls peppering test cases
which leverage testutils.SetupTestOSContext().
Signed-off-by: Cory Snider <csnider@mirantis.com>
libnetwork/etchosts/etchosts_test.go:167:54: empty-lines: extra empty line at the end of a block (revive)
libnetwork/osl/route_linux.go:185:74: empty-lines: extra empty line at the start of a block (revive)
libnetwork/osl/sandbox_linux_test.go:323:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/bitseq/sequence.go:412:48: empty-lines: extra empty line at the start of a block (revive)
libnetwork/datastore/datastore_test.go:67:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/datastore/mock_store.go:34:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld.go:202:44: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld_test.go:76:36: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:256:67: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:303:128: empty-lines: extra empty line at the start of a block (revive)
libnetwork/networkdb/cluster.go:183:72: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipams/null/null_test.go:44:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/macvlan/macvlan_store.go:45:52: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1058:39: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/port_mapping.go:88:111: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/link.go:26:90: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ipv6_test.go:17:34: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ip_tables.go:392:4: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/bridge.go:804:50: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_serf.go:183:29: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_utils.go:81:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/peerdb.go:172:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:209:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:344:89: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:436:63: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/overlay.go:183:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/encryption.go:69:28: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/ov_network.go:563:81: empty-lines: extra empty line at the start of a block (revive)
libnetwork/default_gateway.go:32:43: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:184:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/endpoint.go:161:55: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store.go:320:33: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store_linux_test.go:11:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox.go:571:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:317:246: empty-lines: extra empty line at the start of a block (revive)
libnetwork/endpoint.go:550:17: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox_dns_unix.go:213:106: empty-lines: extra empty line at the start of a block (revive)
libnetwork/controller.go:676:85: empty-lines: extra empty line at the end of a block (revive)
libnetwork/agent.go:876:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/resolver.go:324:69: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1153:92: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1955:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/network.go:2235:9: empty-lines: extra empty line at the start of a block (revive)
libnetwork/libnetwork_internal_test.go:336:26: empty-lines: extra empty line at the start of a block (revive)
libnetwork/resolver_test.go:76:35: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:303:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:985:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1263:37: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
bump netlink to 1.2.1
change usages of netlink handle .Delete() to Close()
remove superfluous replace in vendor.mod
make requires of github.com/Azure/go-ansiterm direct
Signed-off-by: Martin Braun <braun@neuroforge.de>
After moving libnetwork to this repo, we need to update all the import
paths for libnetwork to point to docker/docker/libnetwork instead of
docker/libnetwork.
This change implements that.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This reverts commit 94af1e5af2.
The reason to revert this is, that TestCreateParallel is
continously failing and breaking the CI
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
Go 1.10 fixed the problem related to thread and namespaces.
Details:
2595fe7fb6
In few words there is no more the possibility to have a go routine
running on a thread that is another namespace.
In this commit some cleanup is done and the method SetNamespace is
being removed. This will save tons of setns syscall, that were happening
way too frequently possibily to make sure that each operation was being
done in the host namespace.
I suspect that also all the drivers not running in a different
namespace would be able to drop also the lock of the OS Thread but
will address it in a different commit
Removed useless LockOSThreads around
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
In sandbox creation we disable IPV6 config. But this causes problem in live-restore case
where all IPV6 configs are wiped out on running container. Hence extra check has been added
take care of this issue.
Signed-off-by: selansen <elango.siva@docker.com>
- Disable ipv6 on all interface by default at sandbox creation.
Enable IPv6 per interface basis if the interface has an IPv6
address. In case sandbox has an IPv6 interface, also enable
IPv6 on loopback interface.
Signed-off-by: Alessandro Boch <aboch@docker.com>
If xfrm modules cannot be loaded:
- Create netlink.Handle only for ROUTE socket
- Reject local join on overlay secure network
Signed-off-by: Alessandro Boch <aboch@docker.com>
Currently ipam/ipamutils has a bunch of dependencies
in osl and netlink which makes the ipam/ipamutils harder
to use independently with other applications. This PR
modularizes ipam/ipamutils into a standalone package
with no OS level dependencies.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Exposing osl package outside libnetwork is not neccessary and the
InterfaceStatistics anyways belong to the types package.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
- Maps 1 to 1 with container's networking stack
- It holds container's specific nw options which
before were incorrectly owned by Endpoint.
- Sandbox creation no longer coupled with Endpoint Join,
sandbox and endpoint have now separate lifecycle.
- LeaveAll naturally replaced by Sandbox.Delete
- some pkg and file renaming in order to have clear
mapping between structure name and entity ("sandbox")
- Revisited hosts and resolv.conf handling
- Removed from JoinInfo interface capability of setting hosts and resolv.conf paths
- Changed etchosts.Build() to first write the search domains and then the nameservers
Signed-off-by: Alessandro Boch <aboch@docker.com>
Cory Snider