libnetwork/etchosts/etchosts_test.go:167:54: empty-lines: extra empty line at the end of a block (revive)
libnetwork/osl/route_linux.go:185:74: empty-lines: extra empty line at the start of a block (revive)
libnetwork/osl/sandbox_linux_test.go:323:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/bitseq/sequence.go:412:48: empty-lines: extra empty line at the start of a block (revive)
libnetwork/datastore/datastore_test.go:67:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/datastore/mock_store.go:34:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld.go:202:44: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld_test.go:76:36: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:256:67: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:303:128: empty-lines: extra empty line at the start of a block (revive)
libnetwork/networkdb/cluster.go:183:72: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipams/null/null_test.go:44:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/macvlan/macvlan_store.go:45:52: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1058:39: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/port_mapping.go:88:111: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/link.go:26:90: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ipv6_test.go:17:34: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ip_tables.go:392:4: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/bridge.go:804:50: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_serf.go:183:29: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_utils.go:81:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/peerdb.go:172:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:209:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:344:89: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:436:63: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/overlay.go:183:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/encryption.go:69:28: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/ov_network.go:563:81: empty-lines: extra empty line at the start of a block (revive)
libnetwork/default_gateway.go:32:43: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:184:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/endpoint.go:161:55: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store.go:320:33: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store_linux_test.go:11:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox.go:571:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:317:246: empty-lines: extra empty line at the start of a block (revive)
libnetwork/endpoint.go:550:17: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox_dns_unix.go:213:106: empty-lines: extra empty line at the start of a block (revive)
libnetwork/controller.go:676:85: empty-lines: extra empty line at the end of a block (revive)
libnetwork/agent.go:876:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/resolver.go:324:69: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1153:92: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1955:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/network.go:2235:9: empty-lines: extra empty line at the start of a block (revive)
libnetwork/libnetwork_internal_test.go:336:26: empty-lines: extra empty line at the start of a block (revive)
libnetwork/resolver_test.go:76:35: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:303:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:985:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1263:37: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The correct formatting for machine-readable comments is;
//<some alphanumeric identifier>:<options>[,<option>...][ // comment]
Which basically means:
- MUST NOT have a space before `<identifier>` (e.g. `nolint`)
- Identified MUST be alphanumeric
- MUST be followed by a colon
- MUST be followed by at least one `<option>`
- Optionally additional `<options>` (comma-separated)
- Optionally followed by a comment
Any other format will not be considered a machine-readable comment by `gofmt`,
and thus formatted as a regular comment. Note that this also means that a
`//nolint` (without anything after it) is considered invalid, same for `//#nosec`
(starts with a `#`).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Removal of PolicyLists from Windows VFP must be performed prior to
removing the HNS network. Otherwise PolicyList removal fails with
HNS error "network not found".
Signed-off-by: Trapier Marshall <tmarshall@mirantis.com>
After moving libnetwork to this repo, we need to update all the import
paths for libnetwork to point to docker/docker/libnetwork instead of
docker/libnetwork.
This change implements that.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Deleting a network sandbox on Linux implicitly clears OS (ipvs) load
balancer state. Deleting an HNS network on Windows by contrast does not
inherently remove its corresponding VFP load balancers. The method to
remove load balancers belongs to the network and so must be called prior
to or while deleting a network. This commit reverts one line from
ea2fa20859, reintroducing a call to
explicitly remove backend load balancers during network removal.
Signed-off-by: Trapier Marshall <tmarshall@mirantis.com>
Internal directory is designed to contain libraries
that are exclusively used by this project
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
Lock the network ID in the controller during an addServiceBinding to
prevent racing with network.delete(). This would cause the binding to
be silently ignored in the system.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
This is the heart of the scalability change for services in libnetwork.
The present routing mesh adds load-balancing rules for a network to
every container connected to the network. This newer approach creates a
load-balancing endpoint per network per node. For every service on a
network, libnetwork assigns the VIP of the service to the endpoint's
interface as an alias. This endpoint must have a unique IP address in
order to route return traffic to it. Traffic destined for a service's
VIP arrives at the load-balancing endpoint on the VIP and from there,
Linux load balances it among backend destinations while SNATing said
traffic to the endpoint's unique IP address.
The net result of this scheme is that each node in a swarm need only
have one set of load balancing state per service instead of one per
container on the node. This scheme is very similar to how services
currently operate on Windows nodes in libnetwork. It (as with Windows
nodes) costs the use of extra IP addresses in a network (one per node)
and an extra network hop in the stack, although, always in the stack
local to the container.
In order to prevent existing deployments from suddenly failing if they
failed to allocate sufficient address space to include per-node
load-balancing endpoint IP addresses, this patch preserves the existing
functionality and activates the new functionality on a per-network
basis depending on whether the network has a load-balancing endpoint.
Eventually, moby should always set this option when creating new
networks and should only omit it for networks created as part of a swarm
that are not marked to use endpoint load balancing.
This patch also normalizes the code to treat "load" and "balancer"
as two separate words from the perspectives of variable/function naming.
This means that the 'b' in "balancer" must be capitalized.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
This was passing extra information and adding confusion about the
purpose of the load balancing structure.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
This patch attempts to allow endpoints to complete servicing connections
while being removed from a service. The change adds a flag to the
endpoint.deleteServiceInfoFromCluster() method to indicate whether this
removal should fully remove connectivity through the load balancer
to the endpoint or should just disable directing further connections to
the endpoint. If the flag is 'false', then the load balancer assigns
a weight of 0 to the endpoint but does not remove it as a linux load
balancing destination. It does remove the endpoint as a docker load
balancing endpoint but tracks it in a special map of "disabled-but-not-
destroyed" load balancing endpoints. This allows traffic to continue
flowing, at least under Linux. If the flag is 'true', then the code
removes the endpoint entirely as a load balancing destination.
The sandbox.DisableService() method invokes deleteServiceInfoFromCluster()
with the flag sent to 'false', while the endpoint.sbLeave() method invokes
it with the flag set to 'true' to complete the removal on endpoint
finalization. Renaming the endpoint invokes deleteServiceInfoFromCluster()
with the flag set to 'true' because renaming attempts to completely
remove and then re-add each endpoint service entry.
The controller.rmServiceBinding() method, which carries out the operation,
similarly gets a new flag for whether to fully remove the endpoint. If
the flag is false, it does the job of moving the endpoint from the
load balancing set to the 'disabled' set. It then removes or
de-weights the entry in the OS load balancing table via
network.rmLBBackend(). It removes the service entirely via said method
ONLY IF there are no more live or disabled load balancing endpoints.
Similarly network.addLBBackend() requires slight tweaking to properly
manage the disabled set.
Finally, this change requires propagating the status of disabled
service endpoints via the networkDB. Accordingly, the patch includes
both code to generate and handle service update messages. It also
augments the service structure with a ServiceDisabled boolean to convey
whether an endpoint should ultimately be removed or just disabled.
This, naturally, required a rebuild of the protocol buffer code as well.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
Set a limit to the max size of the transient log to avoid
filling up logs in case of issues
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
Attachable containers they are tasks with no service associated
their cleanup was not done properly so it was possible to have
a leak of their name resolution if that was the last container
on the network.
Cleanupservicebindings was not able to do the cleanup because there
is no service, while also the notification of the delete arrives
after that the network is already being cleaned
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
* Correct SetMatrix documentation
The SetMatrix is a generic data structure, so the description
should not be tight to any specific use
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
* Service Discovery reuse name and serviceBindings deletion
- Added logic to handle name reuse from different services
- Moved the deletion from the serviceBindings map at the end
of the rmServiceBindings body to avoid race with new services
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
* Avoid race on network cleanup
Use the locker to avoid the race between the network
deletion and new endpoints being created
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
* CleanupServiceBindings to clean the SD records
Allow the cleanupServicebindings to take care of the service discovery
cleanup. Also avoid to trigger the cleanup for each endpoint from an SD
point of view
LB and SD will be separated in the future
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
* Addressed comments
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
* NetworkDB deleteEntry has to happen
If there is an error locally guarantee that the delete entry
on network DB is still honored
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
In accordance with the logic for SD, remove the ipvs rules
only when there is no more endpoints using the IP
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
changed the ipMap to SetMatrix to allow transient states
Compacted the addSvc and deleteSvc into a one single method
Updated the datastructure for backends to allow storing all the information needed
to cleanup properly during the cleanupServiceBindings
Removed the enable/disable Service logic that was racing with sbLeave/sbJoin logic
Add some debug logs to track further race conditions
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
- Do not relay on software flags to decide when to create the
virtual service. Instead query the kernel for presence.
So that it cannot happen that a real server creation
fails because the virtual server is missing.
Signed-off-by: Alessandro Boch <aboch@docker.com>
1. Base work was done by msabansal and nwoodmsft
from : https://github.com/msabansal/docker/tree/overlay
2. reorganized under drivers/windows/overlay and rebased to
libnetwork master
3. Porting overlay common fixes to windows driver
* 46f525c
* ba8714e
* 6368406
4. Windows Service Discovery changes for swarm-mode
5. renaming default windows ipam drivers as "windows"
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Signed-off-by: msabansal <sabansal@microsoft.com>
Signed-off-by: nwoodmsft <Nicholas.Wood@microsoft.com>
Sebastiaan van Stijn