Ensures that when a plugin is removed that it doesn't interfere with
other plugins mounts and also ensures its own mounts are cleaned up.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Plugin config can have Mounts without a 'Source' field. In such cases,
performing a 'plugin set' on the mount source will panic the daemon. Its
the same case for device paths as well. This detects the case and
returns error.
Signed-off-by: Anusha Ragunathan <anusha.ragunathan@docker.com>
Instead of duplicating the same if condition per plugin manager directory,
use one if condition and a for-loop.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
In some circumstances we were not properly releasing plugin references,
leading to failures in removing a plugin with no way to recover other
than restarting the daemon.
1. If volume create fails (in the driver)
2. If a driver validation fails (should be rare)
3. If trying to get a plugin that does not match the passed in capability
Ideally the test for 1 and 2 would just be a unit test, however the
plugin interfaces are too complicated as `plugingetter` relies on
github.com/pkg/plugin/Client (a concrete type), which will require
spinning up services from within the unit test... it just wouldn't be a
unit test at this point.
I attempted to refactor this a bit, but since both libnetwork and
swarmkit are reliant on `plugingetter` as well, this would not work.
This really requires a re-write of the lower-level plugin management to
decouple these pieces.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Signed-off-by: John Howard <jhoward@microsoft.com>
This PR has the API changes described in https://github.com/moby/moby/issues/34617.
Specifically, it adds an HTTP header "X-Requested-Platform" which is a JSON-encoded
OCI Image-spec `Platform` structure.
In addition, it renames (almost all) uses of a string variable platform (and associated)
methods/functions to os. This makes it much clearer to disambiguate with the swarm
"platform" which is really os/arch. This is a stepping stone to getting the daemon towards
fully multi-platform/arch-aware, and makes it clear when "operating system" is being
referred to rather than "platform" which is misleadingly used - sometimes in the swarm
meaning, but more often as just the operating system.
The `filters.Include()` method was deprecated in favor of `filters.Contains()`
in 065118390a, but still used in various
locations.
This patch replaces uses of `filters.Include()` with `filters.Contains()`.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
libcontainerd has a bunch of platform dependent code and huge interfaces
that are a pain implement.
To make the plugin manager a bit easier to work with, extract the plugin
executor into an interface and move the containerd implementation to a
separate package.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This enables docker cp and ADD/COPY docker build support for LCOW.
Originally, the graphdriver.Get() interface returned a local path
to the container root filesystem. This does not work for LCOW, so
the Get() method now returns an interface that LCOW implements to
support copying to and from the container.
Signed-off-by: Akash Gupta <akagup@microsoft.com>
This also update:
- runc to 3f2f8b84a77f73d38244dd690525642a72156c64
- runtime-specs to v1.0.0
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
Use strongly typed errors to set HTTP status codes.
Error interfaces are defined in the api/errors package and errors
returned from controllers are checked against these interfaces.
Errors can be wraeped in a pkg/errors.Causer, as long as somewhere in the
line of causes one of the interfaces is implemented. The special error
interfaces take precedence over Causer, meaning if both Causer and one
of the new error interfaces are implemented, the Causer is not
traversed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This prevents mounts in the plugins dir from leaking into other
namespaces which can prevent removal (`device or resource busy`),
particularly on older kernels.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Changes most references of syscall to golang.org/x/sys/
Ones aren't changes include, Errno, Signal and SysProcAttr
as they haven't been implemented in /x/sys/.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
[s390x] switch utsname from unsigned to signed
per 33267e036f
char in s390x in the /x/sys/unix package is now signed, so
change the buildtags
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Enables other subsystems to watch actions for a plugin(s).
This will be used specifically for implementing plugins on swarm where a
swarm controller needs to watch the state of a plugin.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Before this patch, if the plugin's `config.json` is successfully removed
but the main plugin state dir could not be removed for some reason (e.g.
leaked mount), it will prevent the daemon from being able to be
restarted.
This patches changes this to atomically remove the plugin such that on
daemon restart we can detect that there was an error and re-try. It also
changes the logic so that it only logs errors on restore rather than
erroring out the daemon.
This also removes some code which is now duplicated elsewhere.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Also, this removes the use of a questionable golang range feature which
corrects for mutation of a slice during iteration over that slice. This
makes the filter operation easier to read and reason about.
Signed-off-by: David Sheets <dsheets@docker.com>
Previously, a 'plugin not found' error would be returned if a plugin to be
retrieved was found but disabled. This was misleading and incorrect. Now,
a new error plugin.ErrDisabled is returned in this case. This makes the
error message when trying to statically start plugins (from daemon.json or
dockerd command line) accurate.
Signed-off-by: David Sheets <dsheets@docker.com>
Increases the test coverage of pkg/plugins.
Changed signature of function NewClientWithTimeout in pkg/plugin/client, to
take time.Duration instead of integers.
Signed-off-by: Raja Sami <raja.sami@tenpearl.com>
This was mistakenly unmounting everything under `plugins/*` instead of
just `plugins/<id>/*` anytime a plugin is removed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
In some cases, if a user specifies `-f` when disabling a plugin mounts
can still exist on the plugin rootfs.
This can cause problems during upgrade where the rootfs is removed and
may cause data loss.
To resolve this, ensure the rootfs is unmounted
before performing an upgrade.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
While restoring plugins during daemon restart, some plugins can fail to
respond to net.Dial. These plugins should be explicitly set to disabled,
else they will retain their original state of enabled, which is
incorrect.
Tested with a plugin that fails to restart and observed that the state
was set to disabled.
Signed-off-by: Anusha Ragunathan <anusha.ragunathan@docker.com>
When the daemon is configured to run with an authorization-plugin and if
the plugin is disabled, the daemon continues to send API requests to the
plugin and expect it to respond. But the plugin has been disabled. As a
result, all API requests are blocked. Fix this behavior by removing the
disabled plugin from the authz middleware chain.
Tested using riyaz/authz-no-volume-plugin and observed that after
disabling the plugin, API request/response is functional.
Fixes#31836
Signed-off-by: Anusha Ragunathan <anusha.ragunathan@docker.com>
Embedding DockerVersion in plugin config when the plugin is created,
enables users to do a docker plugin inspect and know which version
the plugin was built on. This is helpful in cases where users are
running a new plugin on older docker releases and confused at
unexpected behavior.
By embedding DockerVersion in the config, we claim that there's no
guarantee that if the plugin config's DockerVersion is greater that
the version of the docker engine the plugin is executed against, the
plugin will work as expected.
For example, lets say:
- in 17.03, a plugin was released as johndoe/foo:v1
- in 17.05, the plugin uses the new ipchost config setting and author
publishes johndoe/foo:v2
In this case, johndoe/foo:v2 was built on 17.05 using ipchost, but is
running on docker-engine version 17.03. Since 17.05 > 17.03, there's
no guarantee that the plugin will work as expected. Ofcourse, if the
plugin did not use newly added config settings (ipchost in this case)
in 17.05, it would work fine in 17.03.
Signed-off-by: Anusha Ragunathan <anusha.ragunathan@docker.com>
Tested using global-net-plugin-ipc which sets PidHost in config.json.
Plugins might need access to host pid namespace. Add support for that.
Tested using aragunathan/global-net-plugin-ipc which sets "pidhost" in
config.json. Observed using `readlink /proc/self/ns/pid` that plugin and
host have the same ns.
Signed-off-by: Anusha Ragunathan <anusha.ragunathan@docker.com>
