# Run tests and test documentation Contributing includes testing your changes. If you change the Docker code, you may need to add a new test or modify an existing one. Your contribution could even be adding tests to Docker. For this reason, you need to know a little about Docker's test infrastructure. Many contributors contribute documentation only. Or, a contributor makes a code contribution that changes how Docker behaves and that change needs documentation. For these reasons, you also need to know how to build, view, and test the Docker documentation. In this section, you run tests in the `dry-run-test` branch of your Docker fork. If you have followed along in this guide, you already have this branch. If you don't have this branch, you can create it or simply use another of your branches. ## Understand testing at Docker Docker tests use the Go language's test framework. In this framework, files whose names end in `_test.go` contain test code; you'll find test files like this throughout the Docker repo. Use these files for inspiration when writing your own tests. For information on Go's test framework, see Go's testing package documentation and the go test help. You are responsible for _unit testing_ your contribution when you add new or change existing Docker code. A unit test is a piece of code that invokes a single, small piece of code ( _unit of work_ ) to verify the unit works as expected. Depending on your contribution, you may need to add _integration tests_. These are tests that combine two or more work units into one component. These work units each have unit tests and then, together, integration tests that test the interface between the components. The `integration` and `integration-cli` directories in the Docker repository contain integration test code. Testing is its own specialty. If you aren't familiar with testing techniques, there is a lot of information available to you on the Web. For now, you should understand that, the Docker maintainers may ask you to write a new test or change an existing one. ### Run tests on your local host Before submitting any code change, you should run the entire Docker test suite. The `Makefile` contains a target for the entire test suite. The target's name is simply `test`. The make file contains several targets for testing:

Target	What this target does
test	Run all the tests.
test-unit	Run just the unit tests.
test-integration-cli	Run the test for the integration command line interface.
test-docker-py	Run the tests for Docker API client.

Run the entire test suite on your current repository: 1. Open a terminal on your local host. 2. Change to the root your Docker repository. $ cd docker-fork 3. Make sure you are in your development branch. $ git checkout dry-run-test 4. Run the `make test` command. $ make test This command does several things, it creates a container temporarily for testing. Inside that container, the `make`: * creates a new binary * cross-compiles all the binaries for the various operating systems * runs all the tests in the system It can take several minutes to run all the tests. When they complete successfully, you see the output concludes with something like this: [PASSED]: top - sleep process should be listed in privileged mode [PASSED]: version - verify that it works and that the output is properly formatted PASS coverage: 70.8% of statements ---> Making bundle: test-docker-py (in bundles/1.5.0-dev/test-docker-py) +++ exec docker daemon --debug --host unix:///go/src/github.com/docker/docker/bundles/1.5.0-dev/test-docker-py/docker.sock --storage-driver vfs --exec-driver native --pidfile /go/src/github.com/docker/docker/bundles/1.5.0-dev/test-docker-py/docker.pid ................................................................. ---------------------------------------------------------------------- Ran 65 tests in 89.266s ### Run test targets inside the development container If you are working inside a Docker development container, you use the `hack/make.sh` script to run tests. The `hack/make.sh` script doesn't have a single target that runs all the tests. Instead, you provide a single command line with multiple targets that does the same thing. Try this now. 1. Open a terminal and change to the `docker-fork` root. 2. Start a Docker development image. If you are following along with this guide, you should have a `dry-run-test` image. $ docker run --privileged --rm -ti -v `pwd`:/go/src/github.com/docker/docker dry-run-test /bin/bash 3. Run the tests using the `hack/make.sh` script. root@5f8630b873fe:/go/src/github.com/docker/docker# hack/make.sh dynbinary binary cross test-unit test-integration-cli test-docker-py The tests run just as they did within your local host. Of course, you can also run a subset of these targets too. For example, to run just the unit tests: root@5f8630b873fe:/go/src/github.com/docker/docker# hack/make.sh dynbinary binary cross test-unit Most test targets require that you build these precursor targets first: `dynbinary binary cross` ## Running individual or multiple named tests We use [gocheck](https://labix.org/gocheck) for our integration-cli tests. You can use the `TESTFLAGS` environment variable to run a single test. The flag's value is passed as arguments to the `go test` command. For example, from your local host you can run the `TestBuild` test with this command: $ TESTFLAGS='-check.f DockerSuite.TestBuild*' make test-integration-cli To run the same test inside your Docker development container, you do this: root@5f8630b873fe:/go/src/github.com/docker/docker# TESTFLAGS='-check.f TestBuild*' hack/make.sh binary test-integration-cli ## Testing the Windows binary against a Linux daemon This explains how to test the Windows binary on a Windows machine set up as a development environment. The tests will be run against a docker daemon running on a remote Linux machine. You'll use **Git Bash** that came with the Git for Windows installation. **Git Bash**, just as it sounds, allows you to run a Bash terminal on Windows. 1. If you don't have one open already, start a Git Bash terminal.  2. Change to the `docker` source directory. $ cd /c/gopath/src/github.com/docker/docker 3. Set `DOCKER_REMOTE_DAEMON` as follows: $ export DOCKER_REMOTE_DAEMON=1 4. Set `DOCKER_TEST_HOST` to the `tcp://IP_ADDRESS:2376` value; substitute your Linux machines actual IP address. For example: $ export DOCKER_TEST_HOST=tcp://213.124.23.200:2376 5. Make the binary and run the tests: $ hack/make.sh binary test-integration-cli Some tests are skipped on Windows for various reasons. You can see which tests were skipped by re-running the make and passing in the `TESTFLAGS='-test.v'` value. For example $ TESTFLAGS='-test.v' hack/make.sh binary test-integration-cli Should you wish to run a single test such as one with the name 'TestExample', you can pass in `TESTFLAGS='-check.f TestExample'`. For example $TESTFLAGS='-check.f TestExample' hack/make.sh binary test-integration-cli You can now choose to make changes to the Docker source or the tests. If you make any changes just run these commands again. ## Build and test the documentation The Docker documentation source files are under `docs`. The content is written using extended Markdown. We use the static generator MkDocs to build Docker's documentation. Of course, you don't need to install this generator to build the documentation, it is included with container. You should always check your documentation for grammar and spelling. The best way to do this is with an online grammar checker. When you change a documentation source file, you should test your change locally to make sure your content is there and any links work correctly. You can build the documentation from the local host. The build starts a container and loads the documentation into a server. As long as this container runs, you can browse the docs. 1. In a terminal, change to the root of your `docker-fork` repository. $ cd ~/repos/docker-fork 2. Make sure you are in your feature branch. $ git status On branch dry-run-test Your branch is up-to-date with 'origin/dry-run-test'. nothing to commit, working directory clean 3. Build the documentation. $ make docs When the build completes, you'll see a final output message similar to the following: Successfully built ee7fe7553123 docker run --rm -it -e AWS_S3_BUCKET -e NOCACHE -p 8000:8000 "docker-docs:dry-run-test" mkdocs serve Running at: http://0.0.0.0:8000/ Live reload enabled. Hold ctrl+c to quit. 4. Enter the URL in your browser. If you are using Docker Machine, replace the default localhost address (0.0.0.0) with your DOCKERHOST value. You can get this value at any time by entering `docker-machine ip ` at the command line. 5. Once in the documentation, look for the red notice to verify you are seeing the correct build.  6. Navigate to your new or changed document. 7. Review both the content and the links. 8. Return to your terminal and exit out of the running documentation container. ## Where to go next Congratulations, you have successfully completed the basics you need to understand the Docker test framework. In the next steps, you use what you have learned so far to [contribute to Docker by working on an issue](/project/make-a-contribution/).