Add credentials using a generic EncryptedConfiguration class (#30067)
* WIP: Add credentials using a generic EncryptedConfiguration class
This is sketch code so far.
* Flesh out EncryptedConfiguration and test it
* Better name
* Add command and generator for credentials
* Use the Pathnames
* Extract EncryptedFile from EncryptedConfiguration and add serializers
* Test EncryptedFile
* Extract serializer validation
* Stress the point about losing comments
* Allow encrypted configuration to be read without parsing for display
* Use credentials by default and base them on the master key
* Derive secret_key_base in test/dev, source it from credentials in other envs
And document the usage.
* Document the new credentials setup
* Stop generating the secrets.yml file now that we have credentials
* Document what we should have instead
Still need to make it happen, tho.
* [ci skip] Keep wording to `key base`; prefer defaults.
Usually we say we change defaults, not "spec" out a release.
Can't use backticks in our sdoc generated documentation either.
* Abstract away OpenSSL; prefer MessageEncryptor.
* Spare needless new when raising.
* Encrypted file test shouldn't depend on subclass.
* [ci skip] Some woordings.
* Ditch serializer future coding.
* I said flip it. Flip it good.
* [ci skip] Move require_master_key to the real production.rb.
* Add require_master_key to abort the boot process.
In case the master key is required in a certain environment
we should inspect that the key is there and abort if it isn't.
* Print missing key message and exit immediately.
Spares us a lengthy backtrace and prevents further execution.
I've verified the behavior in a test app, but couldn't figure the
test out as loading the app just exits immediately with:
```
/Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `load': marshal data too short (ArgumentError)
from /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `run'
from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest.rb:830:in `run_one_method'
from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest/parallel.rb:32:in `block (2 levels) in start'
```
It's likely we need to capture and prevent the exit somehow.
Kernel.stub(:exit) didn't work. Leaving it for tomorrow.
* Fix require_master_key config test.
Loading the app would trigger the `exit 1` per require_master_key's
semantics, which then aborted the test.
Fork and wait for the child process to finish, then inspect the
exit status.
Also check we aborted because of a missing master key, so something
else didn't just abort the boot.
Much <3 to @tenderlove for the tip.
* Support reading/writing configs via methods.
* Skip needless deep symbolizing.
* Remove save; test config reader elsewhere.
* Move secret_key_base check to when we're reading it.
Otherwise we'll abort too soon since we don't assign the secret_key_base
to secrets anymore.
* Add missing string literal comments; require unneeded yaml require.
* ya ya ya, rubocop.
* Add master_key/credentials after bundle.
Then we can reuse the existing message on `rails new bc4`.
It'll look like:
```
Using web-console 3.5.1 from https://github.com/rails/web-console.git (at master@ce985eb)
Using rails 5.2.0.alpha from source at `/Users/kasperhansen/Documents/code/rails`
Using sass-rails 5.0.6
Bundle complete! 16 Gemfile dependencies, 72 gems now installed.
Use `bundle info [gemname]` to see where a bundled gem is installed.
Adding config/master.key to store the master encryption key: 97070158c44b4675b876373a6bc9d5a0
Save this in a password manager your team can access.
If you lose the key, no one, including you, can access anything encrypted with it.
create config/master.key
```
And that'll be executed even if `--skip-bundle` was passed.
* Ensure test app has secret_key_base.
* Assign secret_key_base to app or omit.
* Merge noise
* Split options for dynamic delegation into its own method and use deep symbols to make it work
* Update error to point to credentials instead
* Appease Rubocop
* Validate secret_key_base when reading it.
Instead of relying on the validation in key_generator move that into
secret_key_base itself.
* Fix generator and secrets test.
Manually add config.read_encrypted_secrets since it's not there by default
anymore.
Move mentions of config/secrets.yml to config/credentials.yml.enc.
* Remove files I have no idea how they got here.
* [ci skip] swap secrets for credentials.
* [ci skip] And now, changelogs are coming.
2017-09-11 14:21:20 -04:00
|
|
|
# frozen_string_literal: true
|
|
|
|
|
|
|
|
require "abstract_unit"
|
|
|
|
require "active_support/encrypted_file"
|
|
|
|
|
|
|
|
class EncryptedFileTest < ActiveSupport::TestCase
|
|
|
|
setup do
|
|
|
|
@content = "One little fox jumped over the hedge"
|
|
|
|
|
|
|
|
@content_path = File.join(Dir.tmpdir, "content.txt.enc")
|
|
|
|
|
|
|
|
@key_path = File.join(Dir.tmpdir, "content.txt.key")
|
|
|
|
File.write(@key_path, ActiveSupport::EncryptedFile.generate_key)
|
|
|
|
|
2017-12-05 07:41:19 -05:00
|
|
|
@encrypted_file = ActiveSupport::EncryptedFile.new(
|
|
|
|
content_path: @content_path, key_path: @key_path, env_key: "CONTENT_KEY", raise_if_missing_key: true
|
|
|
|
)
|
Add credentials using a generic EncryptedConfiguration class (#30067)
* WIP: Add credentials using a generic EncryptedConfiguration class
This is sketch code so far.
* Flesh out EncryptedConfiguration and test it
* Better name
* Add command and generator for credentials
* Use the Pathnames
* Extract EncryptedFile from EncryptedConfiguration and add serializers
* Test EncryptedFile
* Extract serializer validation
* Stress the point about losing comments
* Allow encrypted configuration to be read without parsing for display
* Use credentials by default and base them on the master key
* Derive secret_key_base in test/dev, source it from credentials in other envs
And document the usage.
* Document the new credentials setup
* Stop generating the secrets.yml file now that we have credentials
* Document what we should have instead
Still need to make it happen, tho.
* [ci skip] Keep wording to `key base`; prefer defaults.
Usually we say we change defaults, not "spec" out a release.
Can't use backticks in our sdoc generated documentation either.
* Abstract away OpenSSL; prefer MessageEncryptor.
* Spare needless new when raising.
* Encrypted file test shouldn't depend on subclass.
* [ci skip] Some woordings.
* Ditch serializer future coding.
* I said flip it. Flip it good.
* [ci skip] Move require_master_key to the real production.rb.
* Add require_master_key to abort the boot process.
In case the master key is required in a certain environment
we should inspect that the key is there and abort if it isn't.
* Print missing key message and exit immediately.
Spares us a lengthy backtrace and prevents further execution.
I've verified the behavior in a test app, but couldn't figure the
test out as loading the app just exits immediately with:
```
/Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `load': marshal data too short (ArgumentError)
from /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `run'
from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest.rb:830:in `run_one_method'
from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest/parallel.rb:32:in `block (2 levels) in start'
```
It's likely we need to capture and prevent the exit somehow.
Kernel.stub(:exit) didn't work. Leaving it for tomorrow.
* Fix require_master_key config test.
Loading the app would trigger the `exit 1` per require_master_key's
semantics, which then aborted the test.
Fork and wait for the child process to finish, then inspect the
exit status.
Also check we aborted because of a missing master key, so something
else didn't just abort the boot.
Much <3 to @tenderlove for the tip.
* Support reading/writing configs via methods.
* Skip needless deep symbolizing.
* Remove save; test config reader elsewhere.
* Move secret_key_base check to when we're reading it.
Otherwise we'll abort too soon since we don't assign the secret_key_base
to secrets anymore.
* Add missing string literal comments; require unneeded yaml require.
* ya ya ya, rubocop.
* Add master_key/credentials after bundle.
Then we can reuse the existing message on `rails new bc4`.
It'll look like:
```
Using web-console 3.5.1 from https://github.com/rails/web-console.git (at master@ce985eb)
Using rails 5.2.0.alpha from source at `/Users/kasperhansen/Documents/code/rails`
Using sass-rails 5.0.6
Bundle complete! 16 Gemfile dependencies, 72 gems now installed.
Use `bundle info [gemname]` to see where a bundled gem is installed.
Adding config/master.key to store the master encryption key: 97070158c44b4675b876373a6bc9d5a0
Save this in a password manager your team can access.
If you lose the key, no one, including you, can access anything encrypted with it.
create config/master.key
```
And that'll be executed even if `--skip-bundle` was passed.
* Ensure test app has secret_key_base.
* Assign secret_key_base to app or omit.
* Merge noise
* Split options for dynamic delegation into its own method and use deep symbols to make it work
* Update error to point to credentials instead
* Appease Rubocop
* Validate secret_key_base when reading it.
Instead of relying on the validation in key_generator move that into
secret_key_base itself.
* Fix generator and secrets test.
Manually add config.read_encrypted_secrets since it's not there by default
anymore.
Move mentions of config/secrets.yml to config/credentials.yml.enc.
* Remove files I have no idea how they got here.
* [ci skip] swap secrets for credentials.
* [ci skip] And now, changelogs are coming.
2017-09-11 14:21:20 -04:00
|
|
|
end
|
|
|
|
|
|
|
|
teardown do
|
|
|
|
FileUtils.rm_rf @content_path
|
|
|
|
FileUtils.rm_rf @key_path
|
|
|
|
end
|
|
|
|
|
|
|
|
test "reading content by env key" do
|
|
|
|
FileUtils.rm_rf @key_path
|
|
|
|
|
|
|
|
begin
|
|
|
|
ENV["CONTENT_KEY"] = ActiveSupport::EncryptedFile.generate_key
|
|
|
|
@encrypted_file.write @content
|
|
|
|
|
|
|
|
assert_equal @content, @encrypted_file.read
|
|
|
|
ensure
|
|
|
|
ENV["CONTENT_KEY"] = nil
|
|
|
|
end
|
|
|
|
end
|
|
|
|
|
|
|
|
test "reading content by key file" do
|
|
|
|
@encrypted_file.write(@content)
|
|
|
|
assert_equal @content, @encrypted_file.read
|
|
|
|
end
|
|
|
|
|
|
|
|
test "change content by key file" do
|
|
|
|
@encrypted_file.write(@content)
|
|
|
|
@encrypted_file.change do |file|
|
|
|
|
file.write(file.read + " and went by the lake")
|
|
|
|
end
|
|
|
|
|
|
|
|
assert_equal "#{@content} and went by the lake", @encrypted_file.read
|
|
|
|
end
|
2017-12-05 07:41:19 -05:00
|
|
|
|
|
|
|
test "raise MissingKeyError when key is missing" do
|
|
|
|
assert_raise(ActiveSupport::EncryptedFile::MissingKeyError) do
|
|
|
|
ActiveSupport::EncryptedFile.new(
|
|
|
|
content_path: @content_path, key_path: "", env_key: "", raise_if_missing_key: true
|
|
|
|
).read
|
|
|
|
end
|
|
|
|
end
|
Add credentials using a generic EncryptedConfiguration class (#30067)
* WIP: Add credentials using a generic EncryptedConfiguration class
This is sketch code so far.
* Flesh out EncryptedConfiguration and test it
* Better name
* Add command and generator for credentials
* Use the Pathnames
* Extract EncryptedFile from EncryptedConfiguration and add serializers
* Test EncryptedFile
* Extract serializer validation
* Stress the point about losing comments
* Allow encrypted configuration to be read without parsing for display
* Use credentials by default and base them on the master key
* Derive secret_key_base in test/dev, source it from credentials in other envs
And document the usage.
* Document the new credentials setup
* Stop generating the secrets.yml file now that we have credentials
* Document what we should have instead
Still need to make it happen, tho.
* [ci skip] Keep wording to `key base`; prefer defaults.
Usually we say we change defaults, not "spec" out a release.
Can't use backticks in our sdoc generated documentation either.
* Abstract away OpenSSL; prefer MessageEncryptor.
* Spare needless new when raising.
* Encrypted file test shouldn't depend on subclass.
* [ci skip] Some woordings.
* Ditch serializer future coding.
* I said flip it. Flip it good.
* [ci skip] Move require_master_key to the real production.rb.
* Add require_master_key to abort the boot process.
In case the master key is required in a certain environment
we should inspect that the key is there and abort if it isn't.
* Print missing key message and exit immediately.
Spares us a lengthy backtrace and prevents further execution.
I've verified the behavior in a test app, but couldn't figure the
test out as loading the app just exits immediately with:
```
/Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `load': marshal data too short (ArgumentError)
from /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `run'
from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest.rb:830:in `run_one_method'
from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest/parallel.rb:32:in `block (2 levels) in start'
```
It's likely we need to capture and prevent the exit somehow.
Kernel.stub(:exit) didn't work. Leaving it for tomorrow.
* Fix require_master_key config test.
Loading the app would trigger the `exit 1` per require_master_key's
semantics, which then aborted the test.
Fork and wait for the child process to finish, then inspect the
exit status.
Also check we aborted because of a missing master key, so something
else didn't just abort the boot.
Much <3 to @tenderlove for the tip.
* Support reading/writing configs via methods.
* Skip needless deep symbolizing.
* Remove save; test config reader elsewhere.
* Move secret_key_base check to when we're reading it.
Otherwise we'll abort too soon since we don't assign the secret_key_base
to secrets anymore.
* Add missing string literal comments; require unneeded yaml require.
* ya ya ya, rubocop.
* Add master_key/credentials after bundle.
Then we can reuse the existing message on `rails new bc4`.
It'll look like:
```
Using web-console 3.5.1 from https://github.com/rails/web-console.git (at master@ce985eb)
Using rails 5.2.0.alpha from source at `/Users/kasperhansen/Documents/code/rails`
Using sass-rails 5.0.6
Bundle complete! 16 Gemfile dependencies, 72 gems now installed.
Use `bundle info [gemname]` to see where a bundled gem is installed.
Adding config/master.key to store the master encryption key: 97070158c44b4675b876373a6bc9d5a0
Save this in a password manager your team can access.
If you lose the key, no one, including you, can access anything encrypted with it.
create config/master.key
```
And that'll be executed even if `--skip-bundle` was passed.
* Ensure test app has secret_key_base.
* Assign secret_key_base to app or omit.
* Merge noise
* Split options for dynamic delegation into its own method and use deep symbols to make it work
* Update error to point to credentials instead
* Appease Rubocop
* Validate secret_key_base when reading it.
Instead of relying on the validation in key_generator move that into
secret_key_base itself.
* Fix generator and secrets test.
Manually add config.read_encrypted_secrets since it's not there by default
anymore.
Move mentions of config/secrets.yml to config/credentials.yml.enc.
* Remove files I have no idea how they got here.
* [ci skip] swap secrets for credentials.
* [ci skip] And now, changelogs are coming.
2017-09-11 14:21:20 -04:00
|
|
|
end
|