1
0
Fork 0
mirror of https://github.com/rails/rails.git synced 2022-11-09 12:12:34 -05:00
rails--rails/activesupport/test/encrypted_configuration_test.rb

74 lines
2.1 KiB
Ruby
Raw Normal View History

Add credentials using a generic EncryptedConfiguration class (#30067) * WIP: Add credentials using a generic EncryptedConfiguration class This is sketch code so far. * Flesh out EncryptedConfiguration and test it * Better name * Add command and generator for credentials * Use the Pathnames * Extract EncryptedFile from EncryptedConfiguration and add serializers * Test EncryptedFile * Extract serializer validation * Stress the point about losing comments * Allow encrypted configuration to be read without parsing for display * Use credentials by default and base them on the master key * Derive secret_key_base in test/dev, source it from credentials in other envs And document the usage. * Document the new credentials setup * Stop generating the secrets.yml file now that we have credentials * Document what we should have instead Still need to make it happen, tho. * [ci skip] Keep wording to `key base`; prefer defaults. Usually we say we change defaults, not "spec" out a release. Can't use backticks in our sdoc generated documentation either. * Abstract away OpenSSL; prefer MessageEncryptor. * Spare needless new when raising. * Encrypted file test shouldn't depend on subclass. * [ci skip] Some woordings. * Ditch serializer future coding. * I said flip it. Flip it good. * [ci skip] Move require_master_key to the real production.rb. * Add require_master_key to abort the boot process. In case the master key is required in a certain environment we should inspect that the key is there and abort if it isn't. * Print missing key message and exit immediately. Spares us a lengthy backtrace and prevents further execution. I've verified the behavior in a test app, but couldn't figure the test out as loading the app just exits immediately with: ``` /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `load': marshal data too short (ArgumentError) from /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `run' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest.rb:830:in `run_one_method' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest/parallel.rb:32:in `block (2 levels) in start' ``` It's likely we need to capture and prevent the exit somehow. Kernel.stub(:exit) didn't work. Leaving it for tomorrow. * Fix require_master_key config test. Loading the app would trigger the `exit 1` per require_master_key's semantics, which then aborted the test. Fork and wait for the child process to finish, then inspect the exit status. Also check we aborted because of a missing master key, so something else didn't just abort the boot. Much <3 to @tenderlove for the tip. * Support reading/writing configs via methods. * Skip needless deep symbolizing. * Remove save; test config reader elsewhere. * Move secret_key_base check to when we're reading it. Otherwise we'll abort too soon since we don't assign the secret_key_base to secrets anymore. * Add missing string literal comments; require unneeded yaml require. * ya ya ya, rubocop. * Add master_key/credentials after bundle. Then we can reuse the existing message on `rails new bc4`. It'll look like: ``` Using web-console 3.5.1 from https://github.com/rails/web-console.git (at master@ce985eb) Using rails 5.2.0.alpha from source at `/Users/kasperhansen/Documents/code/rails` Using sass-rails 5.0.6 Bundle complete! 16 Gemfile dependencies, 72 gems now installed. Use `bundle info [gemname]` to see where a bundled gem is installed. Adding config/master.key to store the master encryption key: 97070158c44b4675b876373a6bc9d5a0 Save this in a password manager your team can access. If you lose the key, no one, including you, can access anything encrypted with it. create config/master.key ``` And that'll be executed even if `--skip-bundle` was passed. * Ensure test app has secret_key_base. * Assign secret_key_base to app or omit. * Merge noise * Split options for dynamic delegation into its own method and use deep symbols to make it work * Update error to point to credentials instead * Appease Rubocop * Validate secret_key_base when reading it. Instead of relying on the validation in key_generator move that into secret_key_base itself. * Fix generator and secrets test. Manually add config.read_encrypted_secrets since it's not there by default anymore. Move mentions of config/secrets.yml to config/credentials.yml.enc. * Remove files I have no idea how they got here. * [ci skip] swap secrets for credentials. * [ci skip] And now, changelogs are coming.
2017-09-11 14:21:20 -04:00
# frozen_string_literal: true
require_relative "abstract_unit"
Add credentials using a generic EncryptedConfiguration class (#30067) * WIP: Add credentials using a generic EncryptedConfiguration class This is sketch code so far. * Flesh out EncryptedConfiguration and test it * Better name * Add command and generator for credentials * Use the Pathnames * Extract EncryptedFile from EncryptedConfiguration and add serializers * Test EncryptedFile * Extract serializer validation * Stress the point about losing comments * Allow encrypted configuration to be read without parsing for display * Use credentials by default and base them on the master key * Derive secret_key_base in test/dev, source it from credentials in other envs And document the usage. * Document the new credentials setup * Stop generating the secrets.yml file now that we have credentials * Document what we should have instead Still need to make it happen, tho. * [ci skip] Keep wording to `key base`; prefer defaults. Usually we say we change defaults, not "spec" out a release. Can't use backticks in our sdoc generated documentation either. * Abstract away OpenSSL; prefer MessageEncryptor. * Spare needless new when raising. * Encrypted file test shouldn't depend on subclass. * [ci skip] Some woordings. * Ditch serializer future coding. * I said flip it. Flip it good. * [ci skip] Move require_master_key to the real production.rb. * Add require_master_key to abort the boot process. In case the master key is required in a certain environment we should inspect that the key is there and abort if it isn't. * Print missing key message and exit immediately. Spares us a lengthy backtrace and prevents further execution. I've verified the behavior in a test app, but couldn't figure the test out as loading the app just exits immediately with: ``` /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `load': marshal data too short (ArgumentError) from /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `run' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest.rb:830:in `run_one_method' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest/parallel.rb:32:in `block (2 levels) in start' ``` It's likely we need to capture and prevent the exit somehow. Kernel.stub(:exit) didn't work. Leaving it for tomorrow. * Fix require_master_key config test. Loading the app would trigger the `exit 1` per require_master_key's semantics, which then aborted the test. Fork and wait for the child process to finish, then inspect the exit status. Also check we aborted because of a missing master key, so something else didn't just abort the boot. Much <3 to @tenderlove for the tip. * Support reading/writing configs via methods. * Skip needless deep symbolizing. * Remove save; test config reader elsewhere. * Move secret_key_base check to when we're reading it. Otherwise we'll abort too soon since we don't assign the secret_key_base to secrets anymore. * Add missing string literal comments; require unneeded yaml require. * ya ya ya, rubocop. * Add master_key/credentials after bundle. Then we can reuse the existing message on `rails new bc4`. It'll look like: ``` Using web-console 3.5.1 from https://github.com/rails/web-console.git (at master@ce985eb) Using rails 5.2.0.alpha from source at `/Users/kasperhansen/Documents/code/rails` Using sass-rails 5.0.6 Bundle complete! 16 Gemfile dependencies, 72 gems now installed. Use `bundle info [gemname]` to see where a bundled gem is installed. Adding config/master.key to store the master encryption key: 97070158c44b4675b876373a6bc9d5a0 Save this in a password manager your team can access. If you lose the key, no one, including you, can access anything encrypted with it. create config/master.key ``` And that'll be executed even if `--skip-bundle` was passed. * Ensure test app has secret_key_base. * Assign secret_key_base to app or omit. * Merge noise * Split options for dynamic delegation into its own method and use deep symbols to make it work * Update error to point to credentials instead * Appease Rubocop * Validate secret_key_base when reading it. Instead of relying on the validation in key_generator move that into secret_key_base itself. * Fix generator and secrets test. Manually add config.read_encrypted_secrets since it's not there by default anymore. Move mentions of config/secrets.yml to config/credentials.yml.enc. * Remove files I have no idea how they got here. * [ci skip] swap secrets for credentials. * [ci skip] And now, changelogs are coming.
2017-09-11 14:21:20 -04:00
require "active_support/encrypted_configuration"
class EncryptedConfigurationTest < ActiveSupport::TestCase
setup do
@tmpdir = Dir.mktmpdir("config-")
@credentials_config_path = File.join(@tmpdir, "credentials.yml.enc")
Add credentials using a generic EncryptedConfiguration class (#30067) * WIP: Add credentials using a generic EncryptedConfiguration class This is sketch code so far. * Flesh out EncryptedConfiguration and test it * Better name * Add command and generator for credentials * Use the Pathnames * Extract EncryptedFile from EncryptedConfiguration and add serializers * Test EncryptedFile * Extract serializer validation * Stress the point about losing comments * Allow encrypted configuration to be read without parsing for display * Use credentials by default and base them on the master key * Derive secret_key_base in test/dev, source it from credentials in other envs And document the usage. * Document the new credentials setup * Stop generating the secrets.yml file now that we have credentials * Document what we should have instead Still need to make it happen, tho. * [ci skip] Keep wording to `key base`; prefer defaults. Usually we say we change defaults, not "spec" out a release. Can't use backticks in our sdoc generated documentation either. * Abstract away OpenSSL; prefer MessageEncryptor. * Spare needless new when raising. * Encrypted file test shouldn't depend on subclass. * [ci skip] Some woordings. * Ditch serializer future coding. * I said flip it. Flip it good. * [ci skip] Move require_master_key to the real production.rb. * Add require_master_key to abort the boot process. In case the master key is required in a certain environment we should inspect that the key is there and abort if it isn't. * Print missing key message and exit immediately. Spares us a lengthy backtrace and prevents further execution. I've verified the behavior in a test app, but couldn't figure the test out as loading the app just exits immediately with: ``` /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `load': marshal data too short (ArgumentError) from /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `run' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest.rb:830:in `run_one_method' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest/parallel.rb:32:in `block (2 levels) in start' ``` It's likely we need to capture and prevent the exit somehow. Kernel.stub(:exit) didn't work. Leaving it for tomorrow. * Fix require_master_key config test. Loading the app would trigger the `exit 1` per require_master_key's semantics, which then aborted the test. Fork and wait for the child process to finish, then inspect the exit status. Also check we aborted because of a missing master key, so something else didn't just abort the boot. Much <3 to @tenderlove for the tip. * Support reading/writing configs via methods. * Skip needless deep symbolizing. * Remove save; test config reader elsewhere. * Move secret_key_base check to when we're reading it. Otherwise we'll abort too soon since we don't assign the secret_key_base to secrets anymore. * Add missing string literal comments; require unneeded yaml require. * ya ya ya, rubocop. * Add master_key/credentials after bundle. Then we can reuse the existing message on `rails new bc4`. It'll look like: ``` Using web-console 3.5.1 from https://github.com/rails/web-console.git (at master@ce985eb) Using rails 5.2.0.alpha from source at `/Users/kasperhansen/Documents/code/rails` Using sass-rails 5.0.6 Bundle complete! 16 Gemfile dependencies, 72 gems now installed. Use `bundle info [gemname]` to see where a bundled gem is installed. Adding config/master.key to store the master encryption key: 97070158c44b4675b876373a6bc9d5a0 Save this in a password manager your team can access. If you lose the key, no one, including you, can access anything encrypted with it. create config/master.key ``` And that'll be executed even if `--skip-bundle` was passed. * Ensure test app has secret_key_base. * Assign secret_key_base to app or omit. * Merge noise * Split options for dynamic delegation into its own method and use deep symbols to make it work * Update error to point to credentials instead * Appease Rubocop * Validate secret_key_base when reading it. Instead of relying on the validation in key_generator move that into secret_key_base itself. * Fix generator and secrets test. Manually add config.read_encrypted_secrets since it's not there by default anymore. Move mentions of config/secrets.yml to config/credentials.yml.enc. * Remove files I have no idea how they got here. * [ci skip] swap secrets for credentials. * [ci skip] And now, changelogs are coming.
2017-09-11 14:21:20 -04:00
@credentials_key_path = File.join(@tmpdir, "master.key")
Add credentials using a generic EncryptedConfiguration class (#30067) * WIP: Add credentials using a generic EncryptedConfiguration class This is sketch code so far. * Flesh out EncryptedConfiguration and test it * Better name * Add command and generator for credentials * Use the Pathnames * Extract EncryptedFile from EncryptedConfiguration and add serializers * Test EncryptedFile * Extract serializer validation * Stress the point about losing comments * Allow encrypted configuration to be read without parsing for display * Use credentials by default and base them on the master key * Derive secret_key_base in test/dev, source it from credentials in other envs And document the usage. * Document the new credentials setup * Stop generating the secrets.yml file now that we have credentials * Document what we should have instead Still need to make it happen, tho. * [ci skip] Keep wording to `key base`; prefer defaults. Usually we say we change defaults, not "spec" out a release. Can't use backticks in our sdoc generated documentation either. * Abstract away OpenSSL; prefer MessageEncryptor. * Spare needless new when raising. * Encrypted file test shouldn't depend on subclass. * [ci skip] Some woordings. * Ditch serializer future coding. * I said flip it. Flip it good. * [ci skip] Move require_master_key to the real production.rb. * Add require_master_key to abort the boot process. In case the master key is required in a certain environment we should inspect that the key is there and abort if it isn't. * Print missing key message and exit immediately. Spares us a lengthy backtrace and prevents further execution. I've verified the behavior in a test app, but couldn't figure the test out as loading the app just exits immediately with: ``` /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `load': marshal data too short (ArgumentError) from /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `run' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest.rb:830:in `run_one_method' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest/parallel.rb:32:in `block (2 levels) in start' ``` It's likely we need to capture and prevent the exit somehow. Kernel.stub(:exit) didn't work. Leaving it for tomorrow. * Fix require_master_key config test. Loading the app would trigger the `exit 1` per require_master_key's semantics, which then aborted the test. Fork and wait for the child process to finish, then inspect the exit status. Also check we aborted because of a missing master key, so something else didn't just abort the boot. Much <3 to @tenderlove for the tip. * Support reading/writing configs via methods. * Skip needless deep symbolizing. * Remove save; test config reader elsewhere. * Move secret_key_base check to when we're reading it. Otherwise we'll abort too soon since we don't assign the secret_key_base to secrets anymore. * Add missing string literal comments; require unneeded yaml require. * ya ya ya, rubocop. * Add master_key/credentials after bundle. Then we can reuse the existing message on `rails new bc4`. It'll look like: ``` Using web-console 3.5.1 from https://github.com/rails/web-console.git (at master@ce985eb) Using rails 5.2.0.alpha from source at `/Users/kasperhansen/Documents/code/rails` Using sass-rails 5.0.6 Bundle complete! 16 Gemfile dependencies, 72 gems now installed. Use `bundle info [gemname]` to see where a bundled gem is installed. Adding config/master.key to store the master encryption key: 97070158c44b4675b876373a6bc9d5a0 Save this in a password manager your team can access. If you lose the key, no one, including you, can access anything encrypted with it. create config/master.key ``` And that'll be executed even if `--skip-bundle` was passed. * Ensure test app has secret_key_base. * Assign secret_key_base to app or omit. * Merge noise * Split options for dynamic delegation into its own method and use deep symbols to make it work * Update error to point to credentials instead * Appease Rubocop * Validate secret_key_base when reading it. Instead of relying on the validation in key_generator move that into secret_key_base itself. * Fix generator and secrets test. Manually add config.read_encrypted_secrets since it's not there by default anymore. Move mentions of config/secrets.yml to config/credentials.yml.enc. * Remove files I have no idea how they got here. * [ci skip] swap secrets for credentials. * [ci skip] And now, changelogs are coming.
2017-09-11 14:21:20 -04:00
File.write(@credentials_key_path, ActiveSupport::EncryptedConfiguration.generate_key)
@credentials = ActiveSupport::EncryptedConfiguration.new(
config_path: @credentials_config_path, key_path: @credentials_key_path,
env_key: "RAILS_MASTER_KEY", raise_if_missing_key: true
)
Add credentials using a generic EncryptedConfiguration class (#30067) * WIP: Add credentials using a generic EncryptedConfiguration class This is sketch code so far. * Flesh out EncryptedConfiguration and test it * Better name * Add command and generator for credentials * Use the Pathnames * Extract EncryptedFile from EncryptedConfiguration and add serializers * Test EncryptedFile * Extract serializer validation * Stress the point about losing comments * Allow encrypted configuration to be read without parsing for display * Use credentials by default and base them on the master key * Derive secret_key_base in test/dev, source it from credentials in other envs And document the usage. * Document the new credentials setup * Stop generating the secrets.yml file now that we have credentials * Document what we should have instead Still need to make it happen, tho. * [ci skip] Keep wording to `key base`; prefer defaults. Usually we say we change defaults, not "spec" out a release. Can't use backticks in our sdoc generated documentation either. * Abstract away OpenSSL; prefer MessageEncryptor. * Spare needless new when raising. * Encrypted file test shouldn't depend on subclass. * [ci skip] Some woordings. * Ditch serializer future coding. * I said flip it. Flip it good. * [ci skip] Move require_master_key to the real production.rb. * Add require_master_key to abort the boot process. In case the master key is required in a certain environment we should inspect that the key is there and abort if it isn't. * Print missing key message and exit immediately. Spares us a lengthy backtrace and prevents further execution. I've verified the behavior in a test app, but couldn't figure the test out as loading the app just exits immediately with: ``` /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `load': marshal data too short (ArgumentError) from /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `run' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest.rb:830:in `run_one_method' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest/parallel.rb:32:in `block (2 levels) in start' ``` It's likely we need to capture and prevent the exit somehow. Kernel.stub(:exit) didn't work. Leaving it for tomorrow. * Fix require_master_key config test. Loading the app would trigger the `exit 1` per require_master_key's semantics, which then aborted the test. Fork and wait for the child process to finish, then inspect the exit status. Also check we aborted because of a missing master key, so something else didn't just abort the boot. Much <3 to @tenderlove for the tip. * Support reading/writing configs via methods. * Skip needless deep symbolizing. * Remove save; test config reader elsewhere. * Move secret_key_base check to when we're reading it. Otherwise we'll abort too soon since we don't assign the secret_key_base to secrets anymore. * Add missing string literal comments; require unneeded yaml require. * ya ya ya, rubocop. * Add master_key/credentials after bundle. Then we can reuse the existing message on `rails new bc4`. It'll look like: ``` Using web-console 3.5.1 from https://github.com/rails/web-console.git (at master@ce985eb) Using rails 5.2.0.alpha from source at `/Users/kasperhansen/Documents/code/rails` Using sass-rails 5.0.6 Bundle complete! 16 Gemfile dependencies, 72 gems now installed. Use `bundle info [gemname]` to see where a bundled gem is installed. Adding config/master.key to store the master encryption key: 97070158c44b4675b876373a6bc9d5a0 Save this in a password manager your team can access. If you lose the key, no one, including you, can access anything encrypted with it. create config/master.key ``` And that'll be executed even if `--skip-bundle` was passed. * Ensure test app has secret_key_base. * Assign secret_key_base to app or omit. * Merge noise * Split options for dynamic delegation into its own method and use deep symbols to make it work * Update error to point to credentials instead * Appease Rubocop * Validate secret_key_base when reading it. Instead of relying on the validation in key_generator move that into secret_key_base itself. * Fix generator and secrets test. Manually add config.read_encrypted_secrets since it's not there by default anymore. Move mentions of config/secrets.yml to config/credentials.yml.enc. * Remove files I have no idea how they got here. * [ci skip] swap secrets for credentials. * [ci skip] And now, changelogs are coming.
2017-09-11 14:21:20 -04:00
end
teardown do
FileUtils.rm_rf @tmpdir
Add credentials using a generic EncryptedConfiguration class (#30067) * WIP: Add credentials using a generic EncryptedConfiguration class This is sketch code so far. * Flesh out EncryptedConfiguration and test it * Better name * Add command and generator for credentials * Use the Pathnames * Extract EncryptedFile from EncryptedConfiguration and add serializers * Test EncryptedFile * Extract serializer validation * Stress the point about losing comments * Allow encrypted configuration to be read without parsing for display * Use credentials by default and base them on the master key * Derive secret_key_base in test/dev, source it from credentials in other envs And document the usage. * Document the new credentials setup * Stop generating the secrets.yml file now that we have credentials * Document what we should have instead Still need to make it happen, tho. * [ci skip] Keep wording to `key base`; prefer defaults. Usually we say we change defaults, not "spec" out a release. Can't use backticks in our sdoc generated documentation either. * Abstract away OpenSSL; prefer MessageEncryptor. * Spare needless new when raising. * Encrypted file test shouldn't depend on subclass. * [ci skip] Some woordings. * Ditch serializer future coding. * I said flip it. Flip it good. * [ci skip] Move require_master_key to the real production.rb. * Add require_master_key to abort the boot process. In case the master key is required in a certain environment we should inspect that the key is there and abort if it isn't. * Print missing key message and exit immediately. Spares us a lengthy backtrace and prevents further execution. I've verified the behavior in a test app, but couldn't figure the test out as loading the app just exits immediately with: ``` /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `load': marshal data too short (ArgumentError) from /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `run' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest.rb:830:in `run_one_method' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest/parallel.rb:32:in `block (2 levels) in start' ``` It's likely we need to capture and prevent the exit somehow. Kernel.stub(:exit) didn't work. Leaving it for tomorrow. * Fix require_master_key config test. Loading the app would trigger the `exit 1` per require_master_key's semantics, which then aborted the test. Fork and wait for the child process to finish, then inspect the exit status. Also check we aborted because of a missing master key, so something else didn't just abort the boot. Much <3 to @tenderlove for the tip. * Support reading/writing configs via methods. * Skip needless deep symbolizing. * Remove save; test config reader elsewhere. * Move secret_key_base check to when we're reading it. Otherwise we'll abort too soon since we don't assign the secret_key_base to secrets anymore. * Add missing string literal comments; require unneeded yaml require. * ya ya ya, rubocop. * Add master_key/credentials after bundle. Then we can reuse the existing message on `rails new bc4`. It'll look like: ``` Using web-console 3.5.1 from https://github.com/rails/web-console.git (at master@ce985eb) Using rails 5.2.0.alpha from source at `/Users/kasperhansen/Documents/code/rails` Using sass-rails 5.0.6 Bundle complete! 16 Gemfile dependencies, 72 gems now installed. Use `bundle info [gemname]` to see where a bundled gem is installed. Adding config/master.key to store the master encryption key: 97070158c44b4675b876373a6bc9d5a0 Save this in a password manager your team can access. If you lose the key, no one, including you, can access anything encrypted with it. create config/master.key ``` And that'll be executed even if `--skip-bundle` was passed. * Ensure test app has secret_key_base. * Assign secret_key_base to app or omit. * Merge noise * Split options for dynamic delegation into its own method and use deep symbols to make it work * Update error to point to credentials instead * Appease Rubocop * Validate secret_key_base when reading it. Instead of relying on the validation in key_generator move that into secret_key_base itself. * Fix generator and secrets test. Manually add config.read_encrypted_secrets since it's not there by default anymore. Move mentions of config/secrets.yml to config/credentials.yml.enc. * Remove files I have no idea how they got here. * [ci skip] swap secrets for credentials. * [ci skip] And now, changelogs are coming.
2017-09-11 14:21:20 -04:00
end
test "reading configuration by env key" do
FileUtils.rm_rf @credentials_key_path
begin
ENV["RAILS_MASTER_KEY"] = ActiveSupport::EncryptedConfiguration.generate_key
@credentials.write({ something: { good: true, bad: false } }.to_yaml)
assert @credentials[:something][:good]
assert_not @credentials.dig(:something, :bad)
assert_nil @credentials.fetch(:nothing, nil)
ensure
ENV["RAILS_MASTER_KEY"] = nil
end
end
test "reading configuration by key file" do
@credentials.write({ something: { good: true } }.to_yaml)
assert @credentials.something[:good]
end
test "reading comment-only configuration" do
@credentials.write("# comment")
assert_equal @credentials.config, {}
end
Add credentials using a generic EncryptedConfiguration class (#30067) * WIP: Add credentials using a generic EncryptedConfiguration class This is sketch code so far. * Flesh out EncryptedConfiguration and test it * Better name * Add command and generator for credentials * Use the Pathnames * Extract EncryptedFile from EncryptedConfiguration and add serializers * Test EncryptedFile * Extract serializer validation * Stress the point about losing comments * Allow encrypted configuration to be read without parsing for display * Use credentials by default and base them on the master key * Derive secret_key_base in test/dev, source it from credentials in other envs And document the usage. * Document the new credentials setup * Stop generating the secrets.yml file now that we have credentials * Document what we should have instead Still need to make it happen, tho. * [ci skip] Keep wording to `key base`; prefer defaults. Usually we say we change defaults, not "spec" out a release. Can't use backticks in our sdoc generated documentation either. * Abstract away OpenSSL; prefer MessageEncryptor. * Spare needless new when raising. * Encrypted file test shouldn't depend on subclass. * [ci skip] Some woordings. * Ditch serializer future coding. * I said flip it. Flip it good. * [ci skip] Move require_master_key to the real production.rb. * Add require_master_key to abort the boot process. In case the master key is required in a certain environment we should inspect that the key is there and abort if it isn't. * Print missing key message and exit immediately. Spares us a lengthy backtrace and prevents further execution. I've verified the behavior in a test app, but couldn't figure the test out as loading the app just exits immediately with: ``` /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `load': marshal data too short (ArgumentError) from /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `run' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest.rb:830:in `run_one_method' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest/parallel.rb:32:in `block (2 levels) in start' ``` It's likely we need to capture and prevent the exit somehow. Kernel.stub(:exit) didn't work. Leaving it for tomorrow. * Fix require_master_key config test. Loading the app would trigger the `exit 1` per require_master_key's semantics, which then aborted the test. Fork and wait for the child process to finish, then inspect the exit status. Also check we aborted because of a missing master key, so something else didn't just abort the boot. Much <3 to @tenderlove for the tip. * Support reading/writing configs via methods. * Skip needless deep symbolizing. * Remove save; test config reader elsewhere. * Move secret_key_base check to when we're reading it. Otherwise we'll abort too soon since we don't assign the secret_key_base to secrets anymore. * Add missing string literal comments; require unneeded yaml require. * ya ya ya, rubocop. * Add master_key/credentials after bundle. Then we can reuse the existing message on `rails new bc4`. It'll look like: ``` Using web-console 3.5.1 from https://github.com/rails/web-console.git (at master@ce985eb) Using rails 5.2.0.alpha from source at `/Users/kasperhansen/Documents/code/rails` Using sass-rails 5.0.6 Bundle complete! 16 Gemfile dependencies, 72 gems now installed. Use `bundle info [gemname]` to see where a bundled gem is installed. Adding config/master.key to store the master encryption key: 97070158c44b4675b876373a6bc9d5a0 Save this in a password manager your team can access. If you lose the key, no one, including you, can access anything encrypted with it. create config/master.key ``` And that'll be executed even if `--skip-bundle` was passed. * Ensure test app has secret_key_base. * Assign secret_key_base to app or omit. * Merge noise * Split options for dynamic delegation into its own method and use deep symbols to make it work * Update error to point to credentials instead * Appease Rubocop * Validate secret_key_base when reading it. Instead of relying on the validation in key_generator move that into secret_key_base itself. * Fix generator and secrets test. Manually add config.read_encrypted_secrets since it's not there by default anymore. Move mentions of config/secrets.yml to config/credentials.yml.enc. * Remove files I have no idea how they got here. * [ci skip] swap secrets for credentials. * [ci skip] And now, changelogs are coming.
2017-09-11 14:21:20 -04:00
test "change configuration by key file" do
@credentials.write({ something: { good: true } }.to_yaml)
@credentials.change do |config_file|
config = YAML.load(config_file.read)
config_file.write config.merge(new: "things").to_yaml
end
assert @credentials.something[:good]
assert_equal "things", @credentials[:new]
end
test "raise error when writing an invalid format value" do
assert_raise(Psych::SyntaxError) do
@credentials.change do |config_file|
config_file.write "login: *login\n username: dummy"
end
end
end
Add credentials using a generic EncryptedConfiguration class (#30067) * WIP: Add credentials using a generic EncryptedConfiguration class This is sketch code so far. * Flesh out EncryptedConfiguration and test it * Better name * Add command and generator for credentials * Use the Pathnames * Extract EncryptedFile from EncryptedConfiguration and add serializers * Test EncryptedFile * Extract serializer validation * Stress the point about losing comments * Allow encrypted configuration to be read without parsing for display * Use credentials by default and base them on the master key * Derive secret_key_base in test/dev, source it from credentials in other envs And document the usage. * Document the new credentials setup * Stop generating the secrets.yml file now that we have credentials * Document what we should have instead Still need to make it happen, tho. * [ci skip] Keep wording to `key base`; prefer defaults. Usually we say we change defaults, not "spec" out a release. Can't use backticks in our sdoc generated documentation either. * Abstract away OpenSSL; prefer MessageEncryptor. * Spare needless new when raising. * Encrypted file test shouldn't depend on subclass. * [ci skip] Some woordings. * Ditch serializer future coding. * I said flip it. Flip it good. * [ci skip] Move require_master_key to the real production.rb. * Add require_master_key to abort the boot process. In case the master key is required in a certain environment we should inspect that the key is there and abort if it isn't. * Print missing key message and exit immediately. Spares us a lengthy backtrace and prevents further execution. I've verified the behavior in a test app, but couldn't figure the test out as loading the app just exits immediately with: ``` /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `load': marshal data too short (ArgumentError) from /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `run' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest.rb:830:in `run_one_method' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest/parallel.rb:32:in `block (2 levels) in start' ``` It's likely we need to capture and prevent the exit somehow. Kernel.stub(:exit) didn't work. Leaving it for tomorrow. * Fix require_master_key config test. Loading the app would trigger the `exit 1` per require_master_key's semantics, which then aborted the test. Fork and wait for the child process to finish, then inspect the exit status. Also check we aborted because of a missing master key, so something else didn't just abort the boot. Much <3 to @tenderlove for the tip. * Support reading/writing configs via methods. * Skip needless deep symbolizing. * Remove save; test config reader elsewhere. * Move secret_key_base check to when we're reading it. Otherwise we'll abort too soon since we don't assign the secret_key_base to secrets anymore. * Add missing string literal comments; require unneeded yaml require. * ya ya ya, rubocop. * Add master_key/credentials after bundle. Then we can reuse the existing message on `rails new bc4`. It'll look like: ``` Using web-console 3.5.1 from https://github.com/rails/web-console.git (at master@ce985eb) Using rails 5.2.0.alpha from source at `/Users/kasperhansen/Documents/code/rails` Using sass-rails 5.0.6 Bundle complete! 16 Gemfile dependencies, 72 gems now installed. Use `bundle info [gemname]` to see where a bundled gem is installed. Adding config/master.key to store the master encryption key: 97070158c44b4675b876373a6bc9d5a0 Save this in a password manager your team can access. If you lose the key, no one, including you, can access anything encrypted with it. create config/master.key ``` And that'll be executed even if `--skip-bundle` was passed. * Ensure test app has secret_key_base. * Assign secret_key_base to app or omit. * Merge noise * Split options for dynamic delegation into its own method and use deep symbols to make it work * Update error to point to credentials instead * Appease Rubocop * Validate secret_key_base when reading it. Instead of relying on the validation in key_generator move that into secret_key_base itself. * Fix generator and secrets test. Manually add config.read_encrypted_secrets since it's not there by default anymore. Move mentions of config/secrets.yml to config/credentials.yml.enc. * Remove files I have no idea how they got here. * [ci skip] swap secrets for credentials. * [ci skip] And now, changelogs are coming.
2017-09-11 14:21:20 -04:00
test "raises key error when accessing config via bang method" do
assert_raise(KeyError) { @credentials.something! }
end
end