1
0
Fork 0
mirror of https://github.com/ruby/ruby.git synced 2022-11-09 12:17:21 -05:00
ruby--ruby/yjit.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1027 lines
27 KiB
C
Raw Normal View History

Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
// This part of YJIT helps interfacing with the rest of CRuby and with the OS.
// Sometimes our FFI binding generation tool gives undesirable outputs when it
// sees C features that Rust doesn't support well. We mitigate that by binding
// functions which have simple parameter types. The boilerplate C functions for
// that purpose are in this file.
// Similarly, we wrap OS facilities we need in simple functions to help with
// FFI and to avoid the need to use external crates.io Rust libraries.
#include "internal.h"
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
#include "internal/sanitizers.h"
#include "internal/string.h"
#include "internal/hash.h"
#include "internal/variable.h"
#include "internal/compile.h"
#include "internal/class.h"
#include "internal/fixnum.h"
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
#include "gc.h"
#include "vm_core.h"
#include "vm_callinfo.h"
#include "builtin.h"
#include "insns.inc"
#include "insns_info.inc"
#include "vm_sync.h"
#include "yjit.h"
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
#include "vm_insnhelper.h"
#include "probes.h"
#include "probes_helper.h"
#include "iseq.h"
Add ability to trace exit locations in yjit (#5970) When running with `--yjit-stats` turned on, yjit can inform the user what the most common exits are. While this is useful information it doesn't tell you the source location of the code that exited or what the code that exited looks like. This change intends to fix that. To use the feature, run yjit with the `--yjit-trace-exits` option, which will record the backtrace for every exit that occurs. This functionality requires the stats feature to be turned on. Calling `--yjit-trace-exits` will automatically set the `--yjit-stats` option. Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file based on the passed filename. *Example usage:* Given the following script, we write to a file called `concat_array.dump` the results of `RubyVM::YJIT.exit_locations`. ```ruby def concat_array ["t", "r", *x = "u", "e"].join end 1000.times do concat_array end RubyVM::YJIT.dump_exit_locations("concat_array.dump") ``` When we run the file with this branch and the appropriate flags the stacktrace will be recorded. Note Stackprof needs to be installed or you need to point to the library directly. ``` ./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb ``` We can then read the dump file with Stackprof: ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump ``` Results will look similar to the following: ``` ================================== Mode: () Samples: 1817 (0.00% miss rate) GC: 0 (0.00%) ================================== TOTAL (pct) SAMPLES (pct) FRAME 1001 (55.1%) 1001 (55.1%) concatarray 335 (18.4%) 335 (18.4%) invokeblock 178 (9.8%) 178 (9.8%) send 140 (7.7%) 140 (7.7%) opt_getinlinecache ...etc... ``` Simply inspecting the `concatarray` method will give `SOURCE UNAVAILABLE` because the source is insns.def. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray ``` Result: ``` concatarray (nonexistent.def:1) samples: 1001 self (55.1%) / 1001 total (55.1%) callers: 1000 ( 99.9%) Object#concat_array 1 ( 0.1%) Gem.suffixes callees (0 total): code: SOURCE UNAVAILABLE ``` However if we go deeper to the callee we can see the exact source of the `concatarray` exit. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array ``` ``` Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1) samples: 0 self (0.0%) / 1000 total (55.0%) callers: 1000 ( 100.0%) block in <main> callees (1000 total): 1000 ( 100.0%) concatarray code: | 1 | def concat_array 1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join | 3 | end ``` The `--walk` option is recommended for this feature as it make it easier to traverse the tree of exits. *Goals of this feature:* This feature is meant to give more information when working on YJIT. The idea is that if we know what code is exiting we can decide what areas to prioritize when fixing exits. In some cases this means adding prioritizing avoiding certain exits in yjit. In more complex cases it might mean changing the Ruby code to be more performant when run with yjit. Ultimately the more information we have about what code is exiting AND why, the better we can make yjit. *Known limitations:* * Due to tracing exits, running this on large codebases like Rails can be quite slow. * On complex methods it can still be difficult to pinpoint the exact cause of an exit. * Stackprof is a requirement to to view the backtrace information from the dump file. Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org> Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 12:59:39 -04:00
#include "ruby/debug.h"
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
// For mmapp(), sysconf()
#ifndef _WIN32
#include <unistd.h>
#include <sys/mman.h>
#endif
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
#include <errno.h>
// We need size_t to have a known size to simplify code generation and FFI.
// TODO(alan): check this in configure.ac to fail fast on 32 bit platforms.
STATIC_ASSERT(64b_size_t, SIZE_MAX == UINT64_MAX);
// I don't know any C implementation that has uint64_t and puts padding bits
// into size_t but the standard seems to allow it.
STATIC_ASSERT(size_t_no_padding_bits, sizeof(size_t) == sizeof(uint64_t));
// This build config impacts the pointer tagging scheme and we only want to
// support one scheme for simplicity.
STATIC_ASSERT(pointer_tagging_scheme, USE_FLONUM);
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
// NOTE: We can trust that uint8_t has no "padding bits" since the C spec
// guarantees it. Wording about padding bits is more explicit in C11 compared
// to C99. See C11 7.20.1.1p2. All this is to say we have _some_ standards backing to
// use a Rust `*mut u8` to represent a C `uint8_t *`.
//
// If we don't want to trust that we can interpreter the C standard correctly, we
// could outsource that work to the Rust standard library by sticking to fundamental
// types in C such as int, long, etc. and use `std::os::raw::c_long` and friends on
// the Rust side.
//
// What's up with the long prefix? Even though we build with `-fvisibility=hidden`
// we are sometimes a static library where the option doesn't prevent name collision.
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
// The "_yjit_" part is for trying to be informative. We might want different
// suffixes for symbols meant for Rust and symbols meant for broader CRuby.
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
bool
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
rb_yjit_mark_writable(void *mem_block, uint32_t mem_size)
{
if (mprotect(mem_block, mem_size, PROT_READ | PROT_WRITE)) {
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
return false;
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
}
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
return true;
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
}
void
rb_yjit_mark_executable(void *mem_block, uint32_t mem_size)
{
if (mprotect(mem_block, mem_size, PROT_READ | PROT_EXEC)) {
rb_bug("Couldn't make JIT page (%p, %lu bytes) executable, errno: %s\n",
mem_block, (unsigned long)mem_size, strerror(errno));
}
}
2022-07-22 12:18:21 -04:00
// `start` is inclusive and `end` is exclusive.
void
rb_yjit_icache_invalidate(void *start, void *end)
{
2022-07-22 12:18:21 -04:00
// Clear/invalidate the instruction cache. Compiles to nothing on x86_64
// but required on ARM before running freshly written code.
// On Darwin it's the same as calling sys_icache_invalidate().
2022-07-22 12:21:19 -04:00
#ifdef __GNUC__
__builtin___clear_cache(start, end);
#elif defined(__aarch64__)
#error No instruction cache clear available with this compiler on Aarch64!
2022-07-22 12:21:19 -04:00
#endif
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
}
Add ability to trace exit locations in yjit (#5970) When running with `--yjit-stats` turned on, yjit can inform the user what the most common exits are. While this is useful information it doesn't tell you the source location of the code that exited or what the code that exited looks like. This change intends to fix that. To use the feature, run yjit with the `--yjit-trace-exits` option, which will record the backtrace for every exit that occurs. This functionality requires the stats feature to be turned on. Calling `--yjit-trace-exits` will automatically set the `--yjit-stats` option. Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file based on the passed filename. *Example usage:* Given the following script, we write to a file called `concat_array.dump` the results of `RubyVM::YJIT.exit_locations`. ```ruby def concat_array ["t", "r", *x = "u", "e"].join end 1000.times do concat_array end RubyVM::YJIT.dump_exit_locations("concat_array.dump") ``` When we run the file with this branch and the appropriate flags the stacktrace will be recorded. Note Stackprof needs to be installed or you need to point to the library directly. ``` ./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb ``` We can then read the dump file with Stackprof: ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump ``` Results will look similar to the following: ``` ================================== Mode: () Samples: 1817 (0.00% miss rate) GC: 0 (0.00%) ================================== TOTAL (pct) SAMPLES (pct) FRAME 1001 (55.1%) 1001 (55.1%) concatarray 335 (18.4%) 335 (18.4%) invokeblock 178 (9.8%) 178 (9.8%) send 140 (7.7%) 140 (7.7%) opt_getinlinecache ...etc... ``` Simply inspecting the `concatarray` method will give `SOURCE UNAVAILABLE` because the source is insns.def. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray ``` Result: ``` concatarray (nonexistent.def:1) samples: 1001 self (55.1%) / 1001 total (55.1%) callers: 1000 ( 99.9%) Object#concat_array 1 ( 0.1%) Gem.suffixes callees (0 total): code: SOURCE UNAVAILABLE ``` However if we go deeper to the callee we can see the exact source of the `concatarray` exit. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array ``` ``` Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1) samples: 0 self (0.0%) / 1000 total (55.0%) callers: 1000 ( 100.0%) block in <main> callees (1000 total): 1000 ( 100.0%) concatarray code: | 1 | def concat_array 1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join | 3 | end ``` The `--walk` option is recommended for this feature as it make it easier to traverse the tree of exits. *Goals of this feature:* This feature is meant to give more information when working on YJIT. The idea is that if we know what code is exiting we can decide what areas to prioritize when fixing exits. In some cases this means adding prioritizing avoiding certain exits in yjit. In more complex cases it might mean changing the Ruby code to be more performant when run with yjit. Ultimately the more information we have about what code is exiting AND why, the better we can make yjit. *Known limitations:* * Due to tracing exits, running this on large codebases like Rails can be quite slow. * On complex methods it can still be difficult to pinpoint the exact cause of an exit. * Stackprof is a requirement to to view the backtrace information from the dump file. Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org> Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 12:59:39 -04:00
# define PTR2NUM(x) (rb_int2inum((intptr_t)(void *)(x)))
// For a given raw_sample (frame), set the hash with the caller's
// name, file, and line number. Return the hash with collected frame_info.
static void
rb_yjit_add_frame(VALUE hash, VALUE frame)
{
VALUE frame_id = PTR2NUM(frame);
if (RTEST(rb_hash_aref(hash, frame_id))) {
return;
2022-07-27 05:42:27 -04:00
}
else {
Add ability to trace exit locations in yjit (#5970) When running with `--yjit-stats` turned on, yjit can inform the user what the most common exits are. While this is useful information it doesn't tell you the source location of the code that exited or what the code that exited looks like. This change intends to fix that. To use the feature, run yjit with the `--yjit-trace-exits` option, which will record the backtrace for every exit that occurs. This functionality requires the stats feature to be turned on. Calling `--yjit-trace-exits` will automatically set the `--yjit-stats` option. Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file based on the passed filename. *Example usage:* Given the following script, we write to a file called `concat_array.dump` the results of `RubyVM::YJIT.exit_locations`. ```ruby def concat_array ["t", "r", *x = "u", "e"].join end 1000.times do concat_array end RubyVM::YJIT.dump_exit_locations("concat_array.dump") ``` When we run the file with this branch and the appropriate flags the stacktrace will be recorded. Note Stackprof needs to be installed or you need to point to the library directly. ``` ./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb ``` We can then read the dump file with Stackprof: ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump ``` Results will look similar to the following: ``` ================================== Mode: () Samples: 1817 (0.00% miss rate) GC: 0 (0.00%) ================================== TOTAL (pct) SAMPLES (pct) FRAME 1001 (55.1%) 1001 (55.1%) concatarray 335 (18.4%) 335 (18.4%) invokeblock 178 (9.8%) 178 (9.8%) send 140 (7.7%) 140 (7.7%) opt_getinlinecache ...etc... ``` Simply inspecting the `concatarray` method will give `SOURCE UNAVAILABLE` because the source is insns.def. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray ``` Result: ``` concatarray (nonexistent.def:1) samples: 1001 self (55.1%) / 1001 total (55.1%) callers: 1000 ( 99.9%) Object#concat_array 1 ( 0.1%) Gem.suffixes callees (0 total): code: SOURCE UNAVAILABLE ``` However if we go deeper to the callee we can see the exact source of the `concatarray` exit. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array ``` ``` Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1) samples: 0 self (0.0%) / 1000 total (55.0%) callers: 1000 ( 100.0%) block in <main> callees (1000 total): 1000 ( 100.0%) concatarray code: | 1 | def concat_array 1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join | 3 | end ``` The `--walk` option is recommended for this feature as it make it easier to traverse the tree of exits. *Goals of this feature:* This feature is meant to give more information when working on YJIT. The idea is that if we know what code is exiting we can decide what areas to prioritize when fixing exits. In some cases this means adding prioritizing avoiding certain exits in yjit. In more complex cases it might mean changing the Ruby code to be more performant when run with yjit. Ultimately the more information we have about what code is exiting AND why, the better we can make yjit. *Known limitations:* * Due to tracing exits, running this on large codebases like Rails can be quite slow. * On complex methods it can still be difficult to pinpoint the exact cause of an exit. * Stackprof is a requirement to to view the backtrace information from the dump file. Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org> Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 12:59:39 -04:00
VALUE frame_info = rb_hash_new();
// Full label for the frame
VALUE name = rb_profile_frame_full_label(frame);
// Absolute path of the frame from rb_iseq_realpath
VALUE file = rb_profile_frame_absolute_path(frame);
// Line number of the frame
VALUE line = rb_profile_frame_first_lineno(frame);
// If absolute path isn't available use the rb_iseq_path
if (NIL_P(file)) {
file = rb_profile_frame_path(frame);
}
rb_hash_aset(frame_info, ID2SYM(rb_intern("name")), name);
rb_hash_aset(frame_info, ID2SYM(rb_intern("file")), file);
rb_hash_aset(frame_info, ID2SYM(rb_intern("samples")), INT2NUM(0));
rb_hash_aset(frame_info, ID2SYM(rb_intern("total_samples")), INT2NUM(0));
rb_hash_aset(frame_info, ID2SYM(rb_intern("edges")), rb_hash_new());
rb_hash_aset(frame_info, ID2SYM(rb_intern("lines")), rb_hash_new());
Add ability to trace exit locations in yjit (#5970) When running with `--yjit-stats` turned on, yjit can inform the user what the most common exits are. While this is useful information it doesn't tell you the source location of the code that exited or what the code that exited looks like. This change intends to fix that. To use the feature, run yjit with the `--yjit-trace-exits` option, which will record the backtrace for every exit that occurs. This functionality requires the stats feature to be turned on. Calling `--yjit-trace-exits` will automatically set the `--yjit-stats` option. Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file based on the passed filename. *Example usage:* Given the following script, we write to a file called `concat_array.dump` the results of `RubyVM::YJIT.exit_locations`. ```ruby def concat_array ["t", "r", *x = "u", "e"].join end 1000.times do concat_array end RubyVM::YJIT.dump_exit_locations("concat_array.dump") ``` When we run the file with this branch and the appropriate flags the stacktrace will be recorded. Note Stackprof needs to be installed or you need to point to the library directly. ``` ./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb ``` We can then read the dump file with Stackprof: ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump ``` Results will look similar to the following: ``` ================================== Mode: () Samples: 1817 (0.00% miss rate) GC: 0 (0.00%) ================================== TOTAL (pct) SAMPLES (pct) FRAME 1001 (55.1%) 1001 (55.1%) concatarray 335 (18.4%) 335 (18.4%) invokeblock 178 (9.8%) 178 (9.8%) send 140 (7.7%) 140 (7.7%) opt_getinlinecache ...etc... ``` Simply inspecting the `concatarray` method will give `SOURCE UNAVAILABLE` because the source is insns.def. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray ``` Result: ``` concatarray (nonexistent.def:1) samples: 1001 self (55.1%) / 1001 total (55.1%) callers: 1000 ( 99.9%) Object#concat_array 1 ( 0.1%) Gem.suffixes callees (0 total): code: SOURCE UNAVAILABLE ``` However if we go deeper to the callee we can see the exact source of the `concatarray` exit. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array ``` ``` Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1) samples: 0 self (0.0%) / 1000 total (55.0%) callers: 1000 ( 100.0%) block in <main> callees (1000 total): 1000 ( 100.0%) concatarray code: | 1 | def concat_array 1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join | 3 | end ``` The `--walk` option is recommended for this feature as it make it easier to traverse the tree of exits. *Goals of this feature:* This feature is meant to give more information when working on YJIT. The idea is that if we know what code is exiting we can decide what areas to prioritize when fixing exits. In some cases this means adding prioritizing avoiding certain exits in yjit. In more complex cases it might mean changing the Ruby code to be more performant when run with yjit. Ultimately the more information we have about what code is exiting AND why, the better we can make yjit. *Known limitations:* * Due to tracing exits, running this on large codebases like Rails can be quite slow. * On complex methods it can still be difficult to pinpoint the exact cause of an exit. * Stackprof is a requirement to to view the backtrace information from the dump file. Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org> Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 12:59:39 -04:00
if (line != INT2FIX(0)) {
rb_hash_aset(frame_info, ID2SYM(rb_intern("line")), line);
}
rb_hash_aset(hash, frame_id, frame_info);
}
}
2022-06-11 08:26:03 -04:00
// Parses the YjitExitLocations raw_samples and line_samples collected by
Add ability to trace exit locations in yjit (#5970) When running with `--yjit-stats` turned on, yjit can inform the user what the most common exits are. While this is useful information it doesn't tell you the source location of the code that exited or what the code that exited looks like. This change intends to fix that. To use the feature, run yjit with the `--yjit-trace-exits` option, which will record the backtrace for every exit that occurs. This functionality requires the stats feature to be turned on. Calling `--yjit-trace-exits` will automatically set the `--yjit-stats` option. Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file based on the passed filename. *Example usage:* Given the following script, we write to a file called `concat_array.dump` the results of `RubyVM::YJIT.exit_locations`. ```ruby def concat_array ["t", "r", *x = "u", "e"].join end 1000.times do concat_array end RubyVM::YJIT.dump_exit_locations("concat_array.dump") ``` When we run the file with this branch and the appropriate flags the stacktrace will be recorded. Note Stackprof needs to be installed or you need to point to the library directly. ``` ./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb ``` We can then read the dump file with Stackprof: ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump ``` Results will look similar to the following: ``` ================================== Mode: () Samples: 1817 (0.00% miss rate) GC: 0 (0.00%) ================================== TOTAL (pct) SAMPLES (pct) FRAME 1001 (55.1%) 1001 (55.1%) concatarray 335 (18.4%) 335 (18.4%) invokeblock 178 (9.8%) 178 (9.8%) send 140 (7.7%) 140 (7.7%) opt_getinlinecache ...etc... ``` Simply inspecting the `concatarray` method will give `SOURCE UNAVAILABLE` because the source is insns.def. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray ``` Result: ``` concatarray (nonexistent.def:1) samples: 1001 self (55.1%) / 1001 total (55.1%) callers: 1000 ( 99.9%) Object#concat_array 1 ( 0.1%) Gem.suffixes callees (0 total): code: SOURCE UNAVAILABLE ``` However if we go deeper to the callee we can see the exact source of the `concatarray` exit. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array ``` ``` Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1) samples: 0 self (0.0%) / 1000 total (55.0%) callers: 1000 ( 100.0%) block in <main> callees (1000 total): 1000 ( 100.0%) concatarray code: | 1 | def concat_array 1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join | 3 | end ``` The `--walk` option is recommended for this feature as it make it easier to traverse the tree of exits. *Goals of this feature:* This feature is meant to give more information when working on YJIT. The idea is that if we know what code is exiting we can decide what areas to prioritize when fixing exits. In some cases this means adding prioritizing avoiding certain exits in yjit. In more complex cases it might mean changing the Ruby code to be more performant when run with yjit. Ultimately the more information we have about what code is exiting AND why, the better we can make yjit. *Known limitations:* * Due to tracing exits, running this on large codebases like Rails can be quite slow. * On complex methods it can still be difficult to pinpoint the exact cause of an exit. * Stackprof is a requirement to to view the backtrace information from the dump file. Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org> Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 12:59:39 -04:00
// rb_yjit_record_exit_stack and turns them into 3 hashes (raw, lines, and frames) to
// be used by RubyVM::YJIT.exit_locations. yjit_raw_samples represents the raw frames information
// (without name, file, and line), and yjit_line_samples represents the line information
// of the iseq caller.
VALUE
rb_yjit_exit_locations_dict(VALUE *yjit_raw_samples, int *yjit_line_samples, int samples_len)
{
VALUE result = rb_hash_new();
VALUE raw_samples = rb_ary_new_capa(samples_len);
VALUE line_samples = rb_ary_new_capa(samples_len);
VALUE frames = rb_hash_new();
int idx = 0;
// While the index is less than samples_len, parse yjit_raw_samples and
// yjit_line_samples, then add casted values to raw_samples and line_samples array.
while (idx < samples_len) {
int num = (int)yjit_raw_samples[idx];
int line_num = (int)yjit_line_samples[idx];
idx++;
rb_ary_push(raw_samples, SIZET2NUM(num));
rb_ary_push(line_samples, INT2NUM(line_num));
// Loop through the length of samples_len and add data to the
// frames hash. Also push the current value onto the raw_samples
2022-06-11 08:26:03 -04:00
// and line_samples array respectively.
Add ability to trace exit locations in yjit (#5970) When running with `--yjit-stats` turned on, yjit can inform the user what the most common exits are. While this is useful information it doesn't tell you the source location of the code that exited or what the code that exited looks like. This change intends to fix that. To use the feature, run yjit with the `--yjit-trace-exits` option, which will record the backtrace for every exit that occurs. This functionality requires the stats feature to be turned on. Calling `--yjit-trace-exits` will automatically set the `--yjit-stats` option. Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file based on the passed filename. *Example usage:* Given the following script, we write to a file called `concat_array.dump` the results of `RubyVM::YJIT.exit_locations`. ```ruby def concat_array ["t", "r", *x = "u", "e"].join end 1000.times do concat_array end RubyVM::YJIT.dump_exit_locations("concat_array.dump") ``` When we run the file with this branch and the appropriate flags the stacktrace will be recorded. Note Stackprof needs to be installed or you need to point to the library directly. ``` ./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb ``` We can then read the dump file with Stackprof: ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump ``` Results will look similar to the following: ``` ================================== Mode: () Samples: 1817 (0.00% miss rate) GC: 0 (0.00%) ================================== TOTAL (pct) SAMPLES (pct) FRAME 1001 (55.1%) 1001 (55.1%) concatarray 335 (18.4%) 335 (18.4%) invokeblock 178 (9.8%) 178 (9.8%) send 140 (7.7%) 140 (7.7%) opt_getinlinecache ...etc... ``` Simply inspecting the `concatarray` method will give `SOURCE UNAVAILABLE` because the source is insns.def. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray ``` Result: ``` concatarray (nonexistent.def:1) samples: 1001 self (55.1%) / 1001 total (55.1%) callers: 1000 ( 99.9%) Object#concat_array 1 ( 0.1%) Gem.suffixes callees (0 total): code: SOURCE UNAVAILABLE ``` However if we go deeper to the callee we can see the exact source of the `concatarray` exit. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array ``` ``` Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1) samples: 0 self (0.0%) / 1000 total (55.0%) callers: 1000 ( 100.0%) block in <main> callees (1000 total): 1000 ( 100.0%) concatarray code: | 1 | def concat_array 1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join | 3 | end ``` The `--walk` option is recommended for this feature as it make it easier to traverse the tree of exits. *Goals of this feature:* This feature is meant to give more information when working on YJIT. The idea is that if we know what code is exiting we can decide what areas to prioritize when fixing exits. In some cases this means adding prioritizing avoiding certain exits in yjit. In more complex cases it might mean changing the Ruby code to be more performant when run with yjit. Ultimately the more information we have about what code is exiting AND why, the better we can make yjit. *Known limitations:* * Due to tracing exits, running this on large codebases like Rails can be quite slow. * On complex methods it can still be difficult to pinpoint the exact cause of an exit. * Stackprof is a requirement to to view the backtrace information from the dump file. Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org> Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 12:59:39 -04:00
for (int o = 0; o < num; o++) {
rb_yjit_add_frame(frames, yjit_raw_samples[idx]);
rb_ary_push(raw_samples, SIZET2NUM(yjit_raw_samples[idx]));
rb_ary_push(line_samples, INT2NUM(yjit_line_samples[idx]));
idx++;
}
rb_ary_push(raw_samples, SIZET2NUM(yjit_raw_samples[idx]));
rb_ary_push(line_samples, INT2NUM(yjit_line_samples[idx]));
idx++;
rb_ary_push(raw_samples, SIZET2NUM(yjit_raw_samples[idx]));
rb_ary_push(line_samples, INT2NUM(yjit_line_samples[idx]));
idx++;
}
// Set add the raw_samples, line_samples, and frames to the results
// hash.
rb_hash_aset(result, ID2SYM(rb_intern("raw")), raw_samples);
rb_hash_aset(result, ID2SYM(rb_intern("lines")), line_samples);
rb_hash_aset(result, ID2SYM(rb_intern("frames")), frames);
return result;
}
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
uint32_t
rb_yjit_get_page_size(void)
{
#if defined(_SC_PAGESIZE)
long page_size = sysconf(_SC_PAGESIZE);
if (page_size <= 0) rb_bug("yjit: failed to get page size");
// 1 GiB limit. x86 CPUs with PDPE1GB can do this and anything larger is unexpected.
// Though our design sort of assume we have fine grained control over memory protection
// which require small page sizes.
if (page_size > 0x40000000l) rb_bug("yjit page size too large");
return (uint32_t)page_size;
#else
#error "YJIT supports POSIX only for now"
#endif
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
}
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
#if defined(MAP_FIXED_NOREPLACE) && defined(_SC_PAGESIZE)
// Align the current write position to a multiple of bytes
static uint8_t *
align_ptr(uint8_t *ptr, uint32_t multiple)
{
// Compute the pointer modulo the given alignment boundary
uint32_t rem = ((uint32_t)(uintptr_t)ptr) % multiple;
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
// If the pointer is already aligned, stop
if (rem == 0)
return ptr;
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
// Pad the pointer by the necessary amount to align it
uint32_t pad = multiple - rem;
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
return ptr + pad;
}
#endif
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
// Address space reservation. Memory pages are mapped on an as needed basis.
// See the Rust mm module for details.
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
uint8_t *
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
rb_yjit_reserve_addr_space(uint32_t mem_size)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
#ifndef _WIN32
uint8_t *mem_block;
// On Linux
#if defined(MAP_FIXED_NOREPLACE) && defined(_SC_PAGESIZE)
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
uint32_t const page_size = (uint32_t)sysconf(_SC_PAGESIZE);
uint8_t *const cfunc_sample_addr = (void *)&rb_yjit_reserve_addr_space;
uint8_t *const probe_region_end = cfunc_sample_addr + INT32_MAX;
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
// Align the requested address to page size
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
uint8_t *req_addr = align_ptr(cfunc_sample_addr, page_size);
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
// Probe for addresses close to this function using MAP_FIXED_NOREPLACE
// to improve odds of being in range for 32-bit relative call instructions.
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
do {
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
mem_block = mmap(
req_addr,
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
mem_size,
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
PROT_NONE,
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED_NOREPLACE,
-1,
0
);
// If we succeeded, stop
if (mem_block != MAP_FAILED) {
break;
}
// +4MB
req_addr += 4 * 1024 * 1024;
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
} while (req_addr < probe_region_end);
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
// On MacOS and other platforms
#else
// Try to map a chunk of memory as executable
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
mem_block = mmap(
(void *)rb_yjit_reserve_addr_space,
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
mem_size,
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
PROT_NONE,
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
MAP_PRIVATE | MAP_ANONYMOUS,
-1,
0
);
#endif
// Fallback
if (mem_block == MAP_FAILED) {
// Try again without the address hint (e.g., valgrind)
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
mem_block = mmap(
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
NULL,
mem_size,
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
PROT_NONE,
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
MAP_PRIVATE | MAP_ANONYMOUS,
-1,
0
);
}
// Check that the memory mapping was successful
if (mem_block == MAP_FAILED) {
YJIT: On-demand executable memory allocation; faster boot (#5944) This commit makes YJIT allocate memory for generated code gradually as needed. Previously, YJIT allocates all the memory it needs on boot in one go, leading to higher than necessary resident set size (RSS) and time spent on boot initializing the memory with a large memset(). Users should no longer need to search for a magic number to pass to `--yjit-exec-mem` since physical memory consumption should now more accurately reflect the requirement of the workload. YJIT now reserves a range of addresses on boot. This region start out with no access permission at all so buggy attempts to jump to the region crashes like before this change. To get this hardening at finer granularity than the page size, we fill each page with trapping instructions when we first allocate physical memory for the page. Most of the time applications don't need 256 MiB of executable code, so allocating on-demand ends up doing less total work than before. Case in point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about half as long after this change. In terms of memory consumption, here is a table to give a rough summary of the impact: | Peak RSS in MiB | -eitself example | railsbench once | | :-------------: | ---------------: | --------------: | | before | 265 | 377 | | after | 11 | 143 | | no YJIT | 10 | 101 | A new module is introduced to handle allocation bookkeeping. `CodePtr` is moved into the module since it has a close relationship with the new `VirtualMemory` struct. This new interface has a slightly smaller surface than before in that marking a region as writable is no longer a public operation.
2022-06-14 10:23:13 -04:00
perror("ruby: yjit: mmap:");
rb_bug("mmap failed");
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
}
return mem_block;
#else
// Windows not supported for now
return NULL;
#endif
}
// Is anyone listening for :c_call and :c_return event currently?
bool
rb_c_method_tracing_currently_enabled(rb_execution_context_t *ec)
{
rb_event_flag_t tracing_events;
if (rb_multi_ractor_p()) {
tracing_events = ruby_vm_event_enabled_global_flags;
}
else {
// At the time of writing, events are never removed from
// ruby_vm_event_enabled_global_flags so always checking using it would
// mean we don't compile even after tracing is disabled.
tracing_events = rb_ec_ractor_hooks(ec)->events;
}
return tracing_events & (RUBY_EVENT_C_CALL | RUBY_EVENT_C_RETURN);
}
// The code we generate in gen_send_cfunc() doesn't fire the c_return TracePoint event
// like the interpreter. When tracing for c_return is enabled, we patch the code after
// the C method return to call into this to fire the event.
void
rb_full_cfunc_return(rb_execution_context_t *ec, VALUE return_value)
{
rb_control_frame_t *cfp = ec->cfp;
RUBY_ASSERT_ALWAYS(cfp == GET_EC()->cfp);
const rb_callable_method_entry_t *me = rb_vm_frame_method_entry(cfp);
RUBY_ASSERT_ALWAYS(RUBYVM_CFUNC_FRAME_P(cfp));
RUBY_ASSERT_ALWAYS(me->def->type == VM_METHOD_TYPE_CFUNC);
// CHECK_CFP_CONSISTENCY("full_cfunc_return"); TODO revive this
// Pop the C func's frame and fire the c_return TracePoint event
// Note that this is the same order as vm_call_cfunc_with_frame().
rb_vm_pop_frame(ec);
EXEC_EVENT_HOOK(ec, RUBY_EVENT_C_RETURN, cfp->self, me->def->original_id, me->called_id, me->owner, return_value);
// Note, this deviates from the interpreter in that users need to enable
// a c_return TracePoint for this DTrace hook to work. A reasonable change
// since the Ruby return event works this way as well.
RUBY_DTRACE_CMETHOD_RETURN_HOOK(ec, me->owner, me->def->original_id);
// Push return value into the caller's stack. We know that it's a frame that
// uses cfp->sp because we are patching a call done with gen_send_cfunc().
ec->cfp->sp[0] = return_value;
ec->cfp->sp++;
}
unsigned int
rb_iseq_encoded_size(const rb_iseq_t *iseq)
{
return iseq->body->iseq_size;
}
// TODO(alan): consider using an opaque pointer for the payload rather than a void pointer
void *
rb_iseq_get_yjit_payload(const rb_iseq_t *iseq)
{
RUBY_ASSERT_ALWAYS(IMEMO_TYPE_P(iseq, imemo_iseq));
if (iseq->body) {
return iseq->body->yjit_payload;
}
else {
// Body is NULL when constructing the iseq.
return NULL;
}
}
void
rb_iseq_set_yjit_payload(const rb_iseq_t *iseq, void *payload)
{
RUBY_ASSERT_ALWAYS(IMEMO_TYPE_P(iseq, imemo_iseq));
RUBY_ASSERT_ALWAYS(iseq->body);
RUBY_ASSERT_ALWAYS(NULL == iseq->body->yjit_payload);
iseq->body->yjit_payload = payload;
}
void
rb_iseq_reset_jit_func(const rb_iseq_t *iseq)
{
RUBY_ASSERT_ALWAYS(IMEMO_TYPE_P(iseq, imemo_iseq));
iseq->body->jit_func = NULL;
}
// Get the PC for a given index in an iseq
VALUE *
rb_iseq_pc_at_idx(const rb_iseq_t *iseq, uint32_t insn_idx)
{
RUBY_ASSERT_ALWAYS(IMEMO_TYPE_P(iseq, imemo_iseq));
RUBY_ASSERT_ALWAYS(insn_idx < iseq->body->iseq_size);
VALUE *encoded = iseq->body->iseq_encoded;
VALUE *pc = &encoded[insn_idx];
return pc;
}
// Get the opcode given a program counter. Can return trace opcode variants.
int
rb_iseq_opcode_at_pc(const rb_iseq_t *iseq, const VALUE *pc)
{
// YJIT should only use iseqs after AST to bytecode compilation
RUBY_ASSERT_ALWAYS(FL_TEST_RAW((VALUE)iseq, ISEQ_TRANSLATED));
const VALUE at_pc = *pc;
return rb_vm_insn_addr2opcode((const void *)at_pc);
}
// used by jit_rb_str_bytesize in codegen.rs
VALUE
rb_str_bytesize(VALUE str)
{
return LONG2NUM(RSTRING_LEN(str));
}
unsigned long
rb_RSTRING_LEN(VALUE str)
{
return RSTRING_LEN(str);
}
char *
rb_RSTRING_PTR(VALUE str)
{
return RSTRING_PTR(str);
}
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
// This is defined only as a named struct inside rb_iseq_constant_body.
// By giving it a separate typedef, we make it nameable by rust-bindgen.
// Bindgen's temp/anon name isn't guaranteed stable.
typedef struct rb_iseq_param_keyword rb_seq_param_keyword_struct;
const char *
rb_insn_name(VALUE insn)
{
return insn_name(insn);
}
// Query the instruction length in bytes for YARV opcode insn
int
rb_insn_len(VALUE insn)
{
return insn_len(insn);
}
unsigned int
rb_vm_ci_argc(const struct rb_callinfo *ci)
{
return vm_ci_argc(ci);
}
ID
rb_vm_ci_mid(const struct rb_callinfo *ci)
{
return vm_ci_mid(ci);
}
unsigned int
rb_vm_ci_flag(const struct rb_callinfo *ci)
{
return vm_ci_flag(ci);
}
const struct rb_callinfo_kwarg *
rb_vm_ci_kwarg(const struct rb_callinfo *ci)
{
return vm_ci_kwarg(ci);
}
int
rb_get_cikw_keyword_len(const struct rb_callinfo_kwarg *cikw)
{
return cikw->keyword_len;
}
VALUE
rb_get_cikw_keywords_idx(const struct rb_callinfo_kwarg *cikw, int idx)
{
return cikw->keywords[idx];
}
rb_method_visibility_t
rb_METHOD_ENTRY_VISI(const rb_callable_method_entry_t *me)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return METHOD_ENTRY_VISI(me);
}
rb_method_type_t
rb_get_cme_def_type(const rb_callable_method_entry_t *cme)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
if (UNDEFINED_METHOD_ENTRY_P(cme)) {
return VM_METHOD_TYPE_UNDEF;
} else {
return cme->def->type;
}
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
}
ID
rb_get_cme_def_body_attr_id(const rb_callable_method_entry_t *cme)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return cme->def->body.attr.id;
}
enum method_optimized_type
rb_get_cme_def_body_optimized_type(const rb_callable_method_entry_t *cme)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return cme->def->body.optimized.type;
}
unsigned int
rb_get_cme_def_body_optimized_index(const rb_callable_method_entry_t *cme)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return cme->def->body.optimized.index;
}
rb_method_cfunc_t *
rb_get_cme_def_body_cfunc(const rb_callable_method_entry_t *cme)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return UNALIGNED_MEMBER_PTR(cme->def, body.cfunc);
}
uintptr_t
rb_get_def_method_serial(const rb_method_definition_t *def)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return def->method_serial;
}
ID
rb_get_def_original_id(const rb_method_definition_t *def)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return def->original_id;
}
int
rb_get_mct_argc(const rb_method_cfunc_t *mct)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return mct->argc;
}
void *
rb_get_mct_func(const rb_method_cfunc_t *mct)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return (void*)mct->func; // this field is defined as type VALUE (*func)(ANYARGS)
}
const rb_iseq_t *
rb_get_def_iseq_ptr(rb_method_definition_t *def)
{
return def_iseq_ptr(def);
}
const rb_iseq_t *
rb_get_iseq_body_local_iseq(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->local_iseq;
}
unsigned int
rb_get_iseq_body_local_table_size(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->local_table_size;
}
VALUE *
rb_get_iseq_body_iseq_encoded(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->iseq_encoded;
}
bool
rb_get_iseq_body_builtin_inline_p(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->builtin_inline_p;
}
unsigned
rb_get_iseq_body_stack_max(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->stack_max;
}
bool
rb_get_iseq_flags_has_opt(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->param.flags.has_opt;
}
bool
rb_get_iseq_flags_has_kw(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->param.flags.has_kw;
}
bool
rb_get_iseq_flags_has_post(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->param.flags.has_post;
}
bool
rb_get_iseq_flags_has_kwrest(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->param.flags.has_kwrest;
}
bool
rb_get_iseq_flags_has_rest(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->param.flags.has_rest;
}
bool
rb_get_iseq_flags_ruby2_keywords(const rb_iseq_t *iseq)
{
return iseq->body->param.flags.ruby2_keywords;
}
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
bool
rb_get_iseq_flags_has_block(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->param.flags.has_block;
}
bool
rb_get_iseq_flags_has_accepts_no_kwarg(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->param.flags.accepts_no_kwarg;
}
const rb_seq_param_keyword_struct *
rb_get_iseq_body_param_keyword(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->param.keyword;
}
unsigned
rb_get_iseq_body_param_size(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->param.size;
}
int
rb_get_iseq_body_param_lead_num(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->param.lead_num;
}
int
rb_get_iseq_body_param_opt_num(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->param.opt_num;
}
const VALUE *
rb_get_iseq_body_param_opt_table(const rb_iseq_t *iseq)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return iseq->body->param.opt_table;
}
// If true, the iseq is leaf and it can be replaced by a single C call.
bool
rb_leaf_invokebuiltin_iseq_p(const rb_iseq_t *iseq)
{
unsigned int invokebuiltin_len = insn_len(BIN(opt_invokebuiltin_delegate_leave));
unsigned int leave_len = insn_len(BIN(leave));
return (iseq->body->iseq_size == (invokebuiltin_len + leave_len) &&
rb_vm_insn_addr2opcode((void *)iseq->body->iseq_encoded[0]) == BIN(opt_invokebuiltin_delegate_leave) &&
rb_vm_insn_addr2opcode((void *)iseq->body->iseq_encoded[invokebuiltin_len]) == BIN(leave) &&
iseq->body->builtin_inline_p
);
}
// Return an rb_builtin_function if the iseq contains only that leaf builtin function.
const struct rb_builtin_function *
rb_leaf_builtin_function(const rb_iseq_t *iseq)
{
if (!rb_leaf_invokebuiltin_iseq_p(iseq))
return NULL;
return (const struct rb_builtin_function *)iseq->body->iseq_encoded[1];
}
VALUE
rb_yjit_str_simple_append(VALUE str1, VALUE str2)
{
return rb_str_cat(str1, RSTRING_PTR(str2), RSTRING_LEN(str2));
}
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
struct rb_control_frame_struct *
rb_get_ec_cfp(const rb_execution_context_t *ec)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return ec->cfp;
}
VALUE *
rb_get_cfp_pc(struct rb_control_frame_struct *cfp)
{
return (VALUE*)cfp->pc;
}
VALUE *
rb_get_cfp_sp(struct rb_control_frame_struct *cfp)
{
return cfp->sp;
}
void
rb_set_cfp_pc(struct rb_control_frame_struct *cfp, const VALUE *pc)
{
cfp->pc = pc;
}
void
rb_set_cfp_sp(struct rb_control_frame_struct *cfp, VALUE *sp)
{
cfp->sp = sp;
}
rb_iseq_t *
rb_cfp_get_iseq(struct rb_control_frame_struct *cfp)
{
// TODO(alan) could assert frame type here to make sure that it's a ruby frame with an iseq.
return (rb_iseq_t*)cfp->iseq;
}
VALUE
rb_get_cfp_self(struct rb_control_frame_struct *cfp)
{
return cfp->self;
}
VALUE *
rb_get_cfp_ep(struct rb_control_frame_struct *cfp)
{
return (VALUE*)cfp->ep;
}
const VALUE *
rb_get_cfp_ep_level(struct rb_control_frame_struct *cfp, uint32_t lv)
{
uint32_t i;
const VALUE *ep = (VALUE*)cfp->ep;
for (i = 0; i < lv; i++) {
ep = VM_ENV_PREV_EP(ep);
}
return ep;
}
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
VALUE
rb_yarv_class_of(VALUE obj)
{
return rb_class_of(obj);
}
// YJIT needs this function to never allocate and never raise
VALUE
rb_yarv_str_eql_internal(VALUE str1, VALUE str2)
{
// We wrap this since it's static inline
return rb_str_eql_internal(str1, str2);
}
// YJIT needs this function to never allocate and never raise
VALUE
rb_yarv_ary_entry_internal(VALUE ary, long offset)
{
return rb_ary_entry_internal(ary, offset);
}
VALUE
rb_yarv_fix_mod_fix(VALUE recv, VALUE obj)
{
return rb_fix_mod_fix(recv, obj);
}
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
// Print the Ruby source location of some ISEQ for debugging purposes
void
rb_yjit_dump_iseq_loc(const rb_iseq_t *iseq, uint32_t insn_idx)
{
char *ptr;
long len;
VALUE path = rb_iseq_path(iseq);
RSTRING_GETMEM(path, ptr, len);
fprintf(stderr, "%s %.*s:%u\n", __func__, (int)len, ptr, rb_iseq_line_no(iseq, insn_idx));
}
// The FL_TEST() macro
VALUE
rb_FL_TEST(VALUE obj, VALUE flags)
{
return RB_FL_TEST(obj, flags);
}
// The FL_TEST_RAW() macro, normally an internal implementation detail
VALUE
rb_FL_TEST_RAW(VALUE obj, VALUE flags)
{
return FL_TEST_RAW(obj, flags);
}
// The RB_TYPE_P macro
bool
rb_RB_TYPE_P(VALUE obj, enum ruby_value_type t)
{
return RB_TYPE_P(obj, t);
}
long
rb_RSTRUCT_LEN(VALUE st)
{
return RSTRUCT_LEN(st);
}
// There are RSTRUCT_SETs in ruby/internal/core/rstruct.h and internal/struct.h
// with different types (int vs long) for k. Here we use the one from ruby/internal/core/rstruct.h,
// which takes an int.
void
rb_RSTRUCT_SET(VALUE st, int k, VALUE v)
{
RSTRUCT_SET(st, k, v);
}
const struct rb_callinfo *
rb_get_call_data_ci(const struct rb_call_data *cd)
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
{
return cd->ci;
}
bool
rb_BASIC_OP_UNREDEFINED_P(enum ruby_basic_operators bop, uint32_t klass)
{
return BASIC_OP_UNREDEFINED_P(bop, klass);
}
VALUE
rb_RCLASS_ORIGIN(VALUE c)
{
return RCLASS_ORIGIN(c);
}
// Return the string encoding index
int
rb_ENCODING_GET(VALUE obj)
{
return RB_ENCODING_GET(obj);
}
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
bool
rb_yjit_multi_ractor_p(void)
{
return rb_multi_ractor_p();
}
// For debug builds
void
rb_assert_iseq_handle(VALUE handle)
{
RUBY_ASSERT_ALWAYS(rb_objspace_markable_object_p(handle));
RUBY_ASSERT_ALWAYS(IMEMO_TYPE_P(handle, imemo_iseq));
}
int
rb_IMEMO_TYPE_P(VALUE imemo, enum imemo_type imemo_type)
{
return IMEMO_TYPE_P(imemo, imemo_type);
}
void
rb_assert_cme_handle(VALUE handle)
{
RUBY_ASSERT_ALWAYS(rb_objspace_markable_object_p(handle));
RUBY_ASSERT_ALWAYS(IMEMO_TYPE_P(handle, imemo_ment));
}
typedef void (*iseq_callback)(const rb_iseq_t *);
// Heap-walking callback for rb_yjit_for_each_iseq().
static int
for_each_iseq_i(void *vstart, void *vend, size_t stride, void *data)
{
const iseq_callback callback = (iseq_callback)data;
VALUE v = (VALUE)vstart;
for (; v != (VALUE)vend; v += stride) {
void *ptr = asan_poisoned_object_p(v);
asan_unpoison_object(v, false);
if (rb_obj_is_iseq(v)) {
rb_iseq_t *iseq = (rb_iseq_t *)v;
callback(iseq);
}
asan_poison_object_if(ptr, v);
}
return 0;
}
// Iterate through the whole GC heap and invoke a callback for each iseq.
// Used for global code invalidation.
void
rb_yjit_for_each_iseq(iseq_callback callback)
{
rb_objspace_each_objects(for_each_iseq_i, (void *)callback);
}
// For running write barriers from Rust. Required when we add a new edge in the
// object graph from `old` to `young`.
void
rb_yjit_obj_written(VALUE old, VALUE young, const char *file, int line)
{
rb_obj_written(old, Qundef, young, file, line);
}
// Acquire the VM lock and then signal all other Ruby threads (ractors) to
// contend for the VM lock, putting them to sleep. YJIT uses this to evict
// threads running inside generated code so among other things, it can
// safely change memory protection of regions housing generated code.
void
rb_yjit_vm_lock_then_barrier(unsigned int *recursive_lock_level, const char *file, int line)
{
rb_vm_lock_enter(recursive_lock_level, file, line);
rb_vm_barrier();
}
// Release the VM lock. The lock level must point to the same integer used to
// acquire the lock.
void
rb_yjit_vm_unlock(unsigned int *recursive_lock_level, const char *file, int line)
{
rb_vm_lock_leave(recursive_lock_level, file, line);
}
// Pointer to a YJIT entry point (machine code generated by YJIT)
typedef VALUE (*yjit_func_t)(rb_execution_context_t *, rb_control_frame_t *);
bool
rb_yjit_compile_iseq(const rb_iseq_t *iseq, rb_execution_context_t *ec)
{
bool success = true;
RB_VM_LOCK_ENTER();
rb_vm_barrier();
// Compile a block version starting at the first instruction
uint8_t *rb_yjit_iseq_gen_entry_point(const rb_iseq_t *iseq, rb_execution_context_t *ec); // defined in Rust
uint8_t *code_ptr = rb_yjit_iseq_gen_entry_point(iseq, ec);
if (code_ptr) {
iseq->body->jit_func = (yjit_func_t)code_ptr;
}
else {
iseq->body->jit_func = 0;
success = false;
}
RB_VM_LOCK_LEAVE();
return success;
}
// GC root for interacting with the GC
struct yjit_root_struct {
bool unused; // empty structs are not legal in C99
};
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
static void
yjit_root_free(void *ptr)
{
// Do nothing. The root lives as long as the process.
}
static size_t
yjit_root_memsize(const void *ptr)
{
// Count off-gc-heap allocation size of the dependency table
return 0; // TODO: more accurate accounting
}
// GC callback during compaction
static void
yjit_root_update_references(void *ptr)
{
// Do nothing since we use rb_gc_mark(), which pins.
}
void rb_yjit_root_mark(void *ptr); // in Rust
// Custom type for interacting with the GC
// TODO: make this write barrier protected
static const rb_data_type_t yjit_root_type = {
"yjit_root",
{rb_yjit_root_mark, yjit_root_free, yjit_root_memsize, yjit_root_update_references},
0, 0, RUBY_TYPED_FREE_IMMEDIATELY
};
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
// For dealing with refinements
void
rb_yjit_invalidate_all_method_lookup_assumptions(void)
{
// It looks like Module#using actually doesn't need to invalidate all the
// method caches, so we do nothing here for now.
}
// Primitives used by yjit.rb
VALUE rb_yjit_stats_enabled_p(rb_execution_context_t *ec, VALUE self);
Add ability to trace exit locations in yjit (#5970) When running with `--yjit-stats` turned on, yjit can inform the user what the most common exits are. While this is useful information it doesn't tell you the source location of the code that exited or what the code that exited looks like. This change intends to fix that. To use the feature, run yjit with the `--yjit-trace-exits` option, which will record the backtrace for every exit that occurs. This functionality requires the stats feature to be turned on. Calling `--yjit-trace-exits` will automatically set the `--yjit-stats` option. Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file based on the passed filename. *Example usage:* Given the following script, we write to a file called `concat_array.dump` the results of `RubyVM::YJIT.exit_locations`. ```ruby def concat_array ["t", "r", *x = "u", "e"].join end 1000.times do concat_array end RubyVM::YJIT.dump_exit_locations("concat_array.dump") ``` When we run the file with this branch and the appropriate flags the stacktrace will be recorded. Note Stackprof needs to be installed or you need to point to the library directly. ``` ./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb ``` We can then read the dump file with Stackprof: ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump ``` Results will look similar to the following: ``` ================================== Mode: () Samples: 1817 (0.00% miss rate) GC: 0 (0.00%) ================================== TOTAL (pct) SAMPLES (pct) FRAME 1001 (55.1%) 1001 (55.1%) concatarray 335 (18.4%) 335 (18.4%) invokeblock 178 (9.8%) 178 (9.8%) send 140 (7.7%) 140 (7.7%) opt_getinlinecache ...etc... ``` Simply inspecting the `concatarray` method will give `SOURCE UNAVAILABLE` because the source is insns.def. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray ``` Result: ``` concatarray (nonexistent.def:1) samples: 1001 self (55.1%) / 1001 total (55.1%) callers: 1000 ( 99.9%) Object#concat_array 1 ( 0.1%) Gem.suffixes callees (0 total): code: SOURCE UNAVAILABLE ``` However if we go deeper to the callee we can see the exact source of the `concatarray` exit. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array ``` ``` Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1) samples: 0 self (0.0%) / 1000 total (55.0%) callers: 1000 ( 100.0%) block in <main> callees (1000 total): 1000 ( 100.0%) concatarray code: | 1 | def concat_array 1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join | 3 | end ``` The `--walk` option is recommended for this feature as it make it easier to traverse the tree of exits. *Goals of this feature:* This feature is meant to give more information when working on YJIT. The idea is that if we know what code is exiting we can decide what areas to prioritize when fixing exits. In some cases this means adding prioritizing avoiding certain exits in yjit. In more complex cases it might mean changing the Ruby code to be more performant when run with yjit. Ultimately the more information we have about what code is exiting AND why, the better we can make yjit. *Known limitations:* * Due to tracing exits, running this on large codebases like Rails can be quite slow. * On complex methods it can still be difficult to pinpoint the exact cause of an exit. * Stackprof is a requirement to to view the backtrace information from the dump file. Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org> Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 12:59:39 -04:00
VALUE rb_yjit_trace_exit_locations_enabled_p(rb_execution_context_t *ec, VALUE self);
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
VALUE rb_yjit_get_stats(rb_execution_context_t *ec, VALUE self);
VALUE rb_yjit_reset_stats_bang(rb_execution_context_t *ec, VALUE self);
VALUE rb_yjit_disasm_iseq(rb_execution_context_t *ec, VALUE self, VALUE iseq);
VALUE rb_yjit_insns_compiled(rb_execution_context_t *ec, VALUE self, VALUE iseq);
VALUE rb_yjit_simulate_oom_bang(rb_execution_context_t *ec, VALUE self);
Add ability to trace exit locations in yjit (#5970) When running with `--yjit-stats` turned on, yjit can inform the user what the most common exits are. While this is useful information it doesn't tell you the source location of the code that exited or what the code that exited looks like. This change intends to fix that. To use the feature, run yjit with the `--yjit-trace-exits` option, which will record the backtrace for every exit that occurs. This functionality requires the stats feature to be turned on. Calling `--yjit-trace-exits` will automatically set the `--yjit-stats` option. Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file based on the passed filename. *Example usage:* Given the following script, we write to a file called `concat_array.dump` the results of `RubyVM::YJIT.exit_locations`. ```ruby def concat_array ["t", "r", *x = "u", "e"].join end 1000.times do concat_array end RubyVM::YJIT.dump_exit_locations("concat_array.dump") ``` When we run the file with this branch and the appropriate flags the stacktrace will be recorded. Note Stackprof needs to be installed or you need to point to the library directly. ``` ./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb ``` We can then read the dump file with Stackprof: ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump ``` Results will look similar to the following: ``` ================================== Mode: () Samples: 1817 (0.00% miss rate) GC: 0 (0.00%) ================================== TOTAL (pct) SAMPLES (pct) FRAME 1001 (55.1%) 1001 (55.1%) concatarray 335 (18.4%) 335 (18.4%) invokeblock 178 (9.8%) 178 (9.8%) send 140 (7.7%) 140 (7.7%) opt_getinlinecache ...etc... ``` Simply inspecting the `concatarray` method will give `SOURCE UNAVAILABLE` because the source is insns.def. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray ``` Result: ``` concatarray (nonexistent.def:1) samples: 1001 self (55.1%) / 1001 total (55.1%) callers: 1000 ( 99.9%) Object#concat_array 1 ( 0.1%) Gem.suffixes callees (0 total): code: SOURCE UNAVAILABLE ``` However if we go deeper to the callee we can see the exact source of the `concatarray` exit. ``` ./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array ``` ``` Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1) samples: 0 self (0.0%) / 1000 total (55.0%) callers: 1000 ( 100.0%) block in <main> callees (1000 total): 1000 ( 100.0%) concatarray code: | 1 | def concat_array 1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join | 3 | end ``` The `--walk` option is recommended for this feature as it make it easier to traverse the tree of exits. *Goals of this feature:* This feature is meant to give more information when working on YJIT. The idea is that if we know what code is exiting we can decide what areas to prioritize when fixing exits. In some cases this means adding prioritizing avoiding certain exits in yjit. In more complex cases it might mean changing the Ruby code to be more performant when run with yjit. Ultimately the more information we have about what code is exiting AND why, the better we can make yjit. *Known limitations:* * Due to tracing exits, running this on large codebases like Rails can be quite slow. * On complex methods it can still be difficult to pinpoint the exact cause of an exit. * Stackprof is a requirement to to view the backtrace information from the dump file. Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org> Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 12:59:39 -04:00
VALUE rb_yjit_get_exit_locations(rb_execution_context_t *ec, VALUE self);
Rust YJIT In December 2021, we opened an [issue] to solicit feedback regarding the porting of the YJIT codebase from C99 to Rust. There were some reservations, but this project was given the go ahead by Ruby core developers and Matz. Since then, we have successfully completed the port of YJIT to Rust. The new Rust version of YJIT has reached parity with the C version, in that it passes all the CRuby tests, is able to run all of the YJIT benchmarks, and performs similarly to the C version (because it works the same way and largely generates the same machine code). We've even incorporated some design improvements, such as a more fine-grained constant invalidation mechanism which we expect will make a big difference in Ruby on Rails applications. Because we want to be careful, YJIT is guarded behind a configure option: ```shell ./configure --enable-yjit # Build YJIT in release mode ./configure --enable-yjit=dev # Build YJIT in dev/debug mode ``` By default, YJIT does not get compiled and cargo/rustc is not required. If YJIT is built in dev mode, then `cargo` is used to fetch development dependencies, but when building in release, `cargo` is not required, only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer. The YJIT command-line options remain mostly unchanged, and more details about the build process are documented in `doc/yjit/yjit.md`. The CI tests have been updated and do not take any more resources than before. The development history of the Rust port is available at the following commit for interested parties: https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be Our hope is that Rust YJIT will be compiled and included as a part of system packages and compiled binaries of the Ruby 3.2 release. We do not anticipate any major problems as Rust is well supported on every platform which YJIT supports, but to make sure that this process works smoothly, we would like to reach out to those who take care of building systems packages before the 3.2 release is shipped and resolve any issues that may come up. [issue]: https://bugs.ruby-lang.org/issues/18481 Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com> Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com> Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 14:40:21 -04:00
// Preprocessed yjit.rb generated during build
#include "yjit.rbinc"
// Can raise RuntimeError
void
rb_yjit_init(void)
{
// Call the Rust initialization code
void rb_yjit_init_rust(void);
rb_yjit_init_rust();
// Initialize the GC hooks. Do this second as some code depend on Rust initialization.
struct yjit_root_struct *root;
VALUE yjit_root = TypedData_Make_Struct(0, struct yjit_root_struct, &yjit_root_type, root);
rb_gc_register_mark_object(yjit_root);
}