* doc/syntax/calling_methods.rdoc (Arguments): Added improved

introduction to arguments including passing style and lazy
  evaluation.  Thanks to Matt Aimonetti.
* doc/syntax/calling_methods.rdoc (Positional Arguments):  Added
  description for sending a message to a method with *arguments
* doc/syntax/calling_methods.rdoc (Default Positional Arguments):
  Added description.  Thanks to Andy Lindeman.
* doc/syntax/calling_methods.rdoc (Block Local Arguments):
  Added description of block locals.  Thanks to Justin Collins.
* doc/syntax/calling_methods.rdoc (Hash to Keyword Arguments):  Added
  section describing ** operator.  Thanks  to Justin Collins.


git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@38823 b2dd03c8-39d4-4d8f-98ff-823fe69b080e

ChangeLog

@@ -1,3 +1,17 @@
+Tue Jan 15 10:54:59 2013  Eric Hodel  <drbrain@segment7.net>
+
+	* doc/syntax/calling_methods.rdoc (Arguments):  Added improved
+	  introduction to arguments including passing style and lazy
+	  evaluation.  Thanks to Matt Aimonetti.
+	* doc/syntax/calling_methods.rdoc (Positional Arguments):  Added
+	  description for sending a message to a method with *arguments
+	* doc/syntax/calling_methods.rdoc (Default Positional Arguments):
+	  Added description.  Thanks to Andy Lindeman.
+	* doc/syntax/calling_methods.rdoc (Block Local Arguments):
+	  Added description of block locals.  Thanks to Justin Collins.
+	* doc/syntax/calling_methods.rdoc (Hash to Keyword Arguments):  Added
+	  section describing ** operator.  Thanks  to Justin Collins.
+
 Tue Jan 15 10:40:18 2013  Marc-Andre Lafortune  <ruby-core@marc-andre.ca>
 
 	* test_lazy_enumerator: Test that map & flat_map also require a block

doc/syntax/calling_methods.rdoc

@@ -27,14 +27,36 @@ NoMethodError.
 You may also use <code>::</code> to designate a receiver, but this is rarely
 used due to the potential for confusion with <code>::</code> for namespaces.
 
-== Positional Arguments
+== Arguments
+
+There are three types of arguments when sending a message, the positional
+arguments, keyword (or named) arguments and the block argument.  Each message
+sent may use one, two or all types of arguments, but the arguments must be
+supplied in this order.
+
+All arguments in ruby are passed by reference and are not lazily evaluated.
+
+Each argument is separated by a <code>,</code>:
+
+  my_method(1, '2', :three)
+
+Arguments may be an expression, a hash argument:
+
+  'key' => value
+
+or a keyword argument:
+
+  key: value
+
+Hash and keyword arguments must be contiguous and must appear after all
+positional arguments, but may be mixed:
+
+  my_method('a' => 1, b: 2, 'c' => 3)
+
+=== Positional Arguments
 
 The positional arguments for the message follow the method name:
 
-  my_method(argument1)
-
-Multiple arguments are separated by a <code>,</code>:
-
   my_method(argument1, argument2)
 
 In many cases parenthesis are not necessary when sending a message:
@@ -47,7 +69,76 @@ to:
 
   method_one argument1, method_two argument2, argument3
 
-== Keyword Arguments
+If the method definition has a <code>*argument</code> extra positional
+arguments will be assigned to +argument+ in the method as an Array.
+
+If the method definition doesn't include keyword arguments the keyword or
+hash-type arguments are assigned as a single hash to the last argument:
+
+  def my_method(options)
+    p options
+  end
+
+  my_method('a' => 1, b: 2) # prints: {'a'=>1, :b=>2}
+
+If too many positional arguments are given an ArgumentError is raised.
+
+=== Default Positional Arguments
+
+When the method defines default arguments you do not need to supply all the
+arguments to the method.  Ruby will fill in the missing arguments in-order.
+
+First we'll cover the simple case where the default arguments appear on the
+right.  Consider this method:
+
+  def my_method(a, b, c = 3, d = 4)
+    p [a, b, c, d]
+  end
+
+Here +c+ and +d+ have default values which ruby will apply for you.  If you
+send only two arguments to this method:
+
+  my_method(1, 2)
+
+You will see ruby print <code>[1, 2, 3, 4]</code>.
+
+If you send three arguments:
+
+  my_method(1, 2, 5)
+
+You will see ruby print <code>[1, 2, 5, 4]</code>
+
+Ruby fills in the missing arguments from left to right.
+
+Ruby allows default values to appear in the middle of positional arguments.
+Consider this more complicated method:
+
+  def my_method(a, b = 2, c = 3, d)
+    p [a, b, c, d]
+  end
+
+Here +b+ and +c+ have default values.  If you send only two arguments to this
+method:
+
+  my_method(1, 4)
+
+You will see ruby print <code>[1, 2, 3, 4]</code>.
+
+If you send three arguments:
+
+  my_method(1, 5, 6)
+
+You will see ruby print <code>[1, 5, 3, 6]</code>.
+
+Describing this in words gets complicated and confusing. I'll describe it
+in variables and values instead.
+
+First <code>1</code> is assigned to +a+, then <code>6</code> is assigned to
++d+.  This leaves only the arguments with default values.  Since
+<code>5</code> has not been assigned to a value yet, it is given to +b+ and
++c+ uses its default value of <code>3</code>.
+
+=== Keyword Arguments
 
 Keyword arguments follow any positional arguments and are separated by commas
 like positional arguments:
@@ -58,7 +149,9 @@ Any keyword arguments not given will use the default value from the method
 definition.  If a keyword argument is given that the method did not list an
 ArgumentError will be raised.
 
-== Block Argument
+=== Block Argument
+
+The block argument sends a closure from the calling scope to the method.
 
 The block argument is always last when sending a message to a method.  A block
 is sent to a method using <code>do ... end</code> or <code>{ ... }</code>:
@@ -97,14 +190,45 @@ go in <code>| ... |</code> following the opening <code>do</code> or
     # ...
   end
 
-== Array to Arguments Conversion
+==== Block Local Arguments
+
+You may also declare block-local arguments to a block using <code>;</code> in
+the block arguments list.  Assigning to a block-local argument will not
+override local arguments outside the block in the caller's scope:
+
+  def my_method
+    yield self
+  end
+
+  place = "world"
+
+  my_method do |obj; place|
+    place = "block"
+    puts "hello #{obj} this is #{place}"
+  end
+
+  puts "place is: #{place}"
+
+This prints:
+
+  hello main this is block
+  place is world
+
+So the +place+ variable in the block is not the same +place+ variable as
+outside the block.  Removing <code>; place</code> from the block arguments
+gives this result:
+
+  hello main this is block
+  place is block
+
+=== Array to Arguments Conversion
 
 Given the following method:
 
-  def my_method(argument1, argument2)
+  def my_method(argument1, argument2, argument3)
   end
 
-You can turn an Array into an Argument list with <code>*</code> (or splat)
+You can turn an Array into an argument list with <code>*</code> (or splat)
 operator:
 
   arguments = [1, 2, 3]
@@ -120,7 +244,16 @@ Both are equivalent to:
   my_method(1, 2, 3)
 
 If the method accepts keyword arguments the splat operator will convert a hash
-at the end of the array into keyword arguments.
+at the end of the array into keyword arguments:
+
+  def my_method(a, b, c: 3)
+  end
+
+  arguments = [1, 2, { c: 4 }]
+  my_method(*arguments)
+
+You may also use the <code>**</code> (described next) to convert a Hash into
+keyword arguments.
 
 If the number of objects in the Array do not match the number of arguments for
 the method an ArgumentError will be raised.
@@ -128,7 +261,44 @@ the method an ArgumentError will be raised.
 If the splat operator comes first in the call, parentheses must be used to
 avoid a warning.
 
-== Proc to Block Conversion
+=== Hash to Keyword Arguments Conversion
+
+Given the following method:
+
+  def my_method(first: 1, second: 2, third: 3)
+  end
+
+You can turn a Hash into keyword arguments with the <code>**</code> operator:
+
+  arguments = { first: 3, second: 4, third: 5 }
+  my_method(**arguments)
+
+or:
+
+  arguments = { first: 3, second: 4 }
+  my_method(third: 5, **arguments)
+
+Both are equivalent to:
+
+  my_method(first: 3, second: 4, third: 5)
+
+If the method definition uses <code>**</code> to gather arbitrary keyword
+arguments they will not be gathered by <code>*</code>:
+
+  def my_method(*a, **kw)
+    p arguments: a, keywords: kw
+  end
+
+  my_method(1, 2, '3' => 4, five: 6)
+
+Prints:
+
+  {:arguments=>[1, 2], :keywords=>{"3"=>4, :five=>6}}
+
+Unlike the splat operator described above the <code>**</code> operator has no
+commonly recognized name.
+
+=== Proc to Block Conversion
 
 Given a method that use a block:
 
@@ -146,6 +316,6 @@ operator:
 If the splat operator comes first in the call, parenthesis must be used to
 avoid a warning.
 
-Unlike the splat operator described above the <code>&</code> has no commonly
+Unlike the splat operator described above the <code>&</code> operator has no
-recognized name.
+commonly recognized name.