# # Note: Rinda::Ring API is unstable. # require 'drb/drb' require 'rinda/rinda' require 'thread' require 'ipaddr' module Rinda ## # The default port Ring discovery will use. Ring_PORT = 7647 ## # A RingServer allows a Rinda::TupleSpace to be located via UDP broadcasts. # Default service location uses the following steps: # # 1. A RingServer begins listening on the network broadcast UDP address. # 2. A RingFinger sends a UDP packet containing the DRb URI where it will # listen for a reply. # 3. The RingServer receives the UDP packet and connects back to the # provided DRb URI with the DRb service. # # A RingServer requires a TupleSpace: # # ts = Rinda::TupleSpace.new # rs = Rinda::RingServer.new # # RingServer can also listen on multicast addresses for announcements. This # allows multiple RingServers to run on the same host. To use network # broadcast and multicast: # # ts = Rinda::TupleSpace.new # rs = Rinda::RingServer.new ts, %w[Socket::INADDR_ANY, 239.0.0.1 ff02::1] class RingServer include DRbUndumped ## # Special renewer for the RingServer to allow shutdown class Renewer # :nodoc: include DRbUndumped ## # Set to false to shutdown future requests using this Renewer attr_writer :renew def initialize # :nodoc: @renew = true end def renew # :nodoc: @renew ? 1 : true end end ## # Advertises +ts+ on the given +addresses+ at +port+. # # If +addresses+ is omitted only the UDP broadcast address is used. # # +addresses+ can contain multiple addresses. If a multicast address is # given in +addresses+ then the RingServer will listen for multicast # queries. def initialize(ts, addresses=[Socket::INADDR_ANY], port=Ring_PORT) @port = port if Integer === addresses then addresses, @port = [Socket::INADDR_ANY], addresses end @renewer = Renewer.new @ts = ts @sockets = addresses.map do |address| make_socket(address) end @w_services = write_services @r_service = reply_service end ## # Creates a socket at +address+ def make_socket(address) addrinfo = Addrinfo.udp(address, @port) socket = Socket.new(addrinfo.pfamily, addrinfo.socktype, addrinfo.protocol) if addrinfo.ipv4_multicast? or addrinfo.ipv6_multicast? then if Socket.const_defined?(:SO_REUSEPORT) then socket.setsockopt(:SOCKET, :SO_REUSEPORT, true) else socket.setsockopt(:SOCKET, :SO_REUSEADDR, true) end if addrinfo.ipv4_multicast? then mreq = IPAddr.new(addrinfo.ip_address).hton + IPAddr.new('0.0.0.0').hton socket.setsockopt(:IPPROTO_IP, :IP_ADD_MEMBERSHIP, mreq) else mreq = IPAddr.new(addrinfo.ip_address).hton + [0].pack('I') socket.setsockopt(:IPPROTO_IPV6, :IPV6_JOIN_GROUP, mreq) end end socket.bind(addrinfo) socket end ## # Creates threads that pick up UDP packets and passes them to do_write for # decoding. def write_services @sockets.map do |s| Thread.new(s) do |socket| loop do msg = socket.recv(1024) do_write(msg) end end end end ## # Extracts the response URI from +msg+ and adds it to TupleSpace where it # will be picked up by +reply_service+ for notification. def do_write(msg) Thread.new do begin tuple, sec = Marshal.load(msg) @ts.write(tuple, sec) rescue end end end ## # Creates a thread that notifies waiting clients from the TupleSpace. def reply_service Thread.new do loop do do_reply end end end ## # Pulls lookup tuples out of the TupleSpace and sends their DRb object the # address of the local TupleSpace. def do_reply tuple = @ts.take([:lookup_ring, DRbObject], @renewer) Thread.new { tuple[1].call(@ts) rescue nil} rescue end ## # Shuts down the RingServer def shutdown @renewer.renew = false @w_services.each do |thread| thread.kill end @sockets.each do |socket| socket.close end @r_service.kill end end ## # RingFinger is used by RingServer clients to discover the RingServer's # TupleSpace. Typically, all a client needs to do is call # RingFinger.primary to retrieve the remote TupleSpace, which it can then # begin using. # # To find the first available remote TupleSpace: # # Rinda::RingFinger.primary # # To create a RingFinger that broadcasts to a custom list: # # rf = Rinda::RingFinger.new ['localhost', '192.0.2.1'] # rf.primary # # Rinda::RingFinger also understands multicast addresses and sets them up # properly. This allows you to run multiple RingServers on the same host: # # rf = Rinda::RingFinger.new ['239.0.0.1'] # rf.primary # # You can set the hop count (or TTL) for multicast searches using # #multicast_hops. # # If you use IPv6 multicast you may need to set both an address and the # outbound interface index: # # rf = Rinda::RingFinger.new ['ff02::1'] # rf.multicast_interface = 1 # rf.primary # # At this time there is no easy way to get an interface index by name. class RingFinger @@broadcast_list = ['', 'localhost'] @@finger = nil ## # Creates a singleton RingFinger and looks for a RingServer. Returns the # created RingFinger. def self.finger unless @@finger @@finger = self.new @@finger.lookup_ring_any end @@finger end ## # Returns the first advertised TupleSpace. def self.primary finger.primary end ## # Contains all discovered TupleSpaces except for the primary. def self.to_a finger.to_a end ## # The list of addresses where RingFinger will send query packets. attr_accessor :broadcast_list ## # Maximum number of hops for sent multicast packets (if using a multicast # address in the broadcast list). The default is 1 (same as UDP # broadcast). attr_accessor :multicast_hops ## # The interface index to send IPv6 multicast packets from. attr_accessor :multicast_interface ## # The port that RingFinger will send query packets to. attr_accessor :port ## # Contain the first advertised TupleSpace after lookup_ring_any is called. attr_accessor :primary ## # Creates a new RingFinger that will look for RingServers at +port+ on # the addresses in +broadcast_list+. # # If +broadcast_list+ contains a multicast address then multicast queries # will be made using the given multicast_hops and multicast_interface. def initialize(broadcast_list=@@broadcast_list, port=Ring_PORT) @broadcast_list = broadcast_list || ['localhost'] @port = port @primary = nil @rings = [] @multicast_hops = 1 @multicast_interface = 0 end ## # Contains all discovered TupleSpaces except for the primary. def to_a @rings end ## # Iterates over all discovered TupleSpaces starting with the primary. def each lookup_ring_any unless @primary return unless @primary yield(@primary) @rings.each { |x| yield(x) } end ## # Looks up RingServers waiting +timeout+ seconds. RingServers will be # given +block+ as a callback, which will be called with the remote # TupleSpace. def lookup_ring(timeout=5, &block) return lookup_ring_any(timeout) unless block_given? msg = Marshal.dump([[:lookup_ring, DRbObject.new(block)], timeout]) @broadcast_list.each do |it| send_message(it, msg) end sleep(timeout) end ## # Returns the first found remote TupleSpace. Any further recovered # TupleSpaces can be found by calling +to_a+. def lookup_ring_any(timeout=5) queue = Queue.new Thread.new do self.lookup_ring(timeout) do |ts| queue.push(ts) end queue.push(nil) end @primary = queue.pop raise('RingNotFound') if @primary.nil? Thread.new do while it = queue.pop @rings.push(it) end end @primary end ## # Creates a socket for +address+ with the appropriate multicast options # for multicast addresses. def make_socket(address) # :nodoc: addrinfo = Addrinfo.udp(address, @port) soc = Socket.new(addrinfo.pfamily, addrinfo.socktype, addrinfo.protocol) if addrinfo.ipv4_multicast? then soc.setsockopt(:IPPROTO_IP, :IP_MULTICAST_LOOP, true) soc.setsockopt(:IPPROTO_IP, :IP_MULTICAST_TTL, [@multicast_hops].pack('c')) elsif addrinfo.ipv6_multicast? then soc.setsockopt(:IPPROTO_IPV6, :IPV6_MULTICAST_LOOP, true) soc.setsockopt(:IPPROTO_IPV6, :IPV6_MULTICAST_HOPS, [@multicast_hops].pack('I')) soc.setsockopt(:IPPROTO_IPV6, :IPV6_MULTICAST_IF, [@multicast_interface].pack('I')) else soc.setsockopt(:SOL_SOCKET, :SO_BROADCAST, true) end soc.connect(addrinfo) soc end def send_message(address, message) # :nodoc: soc = make_socket(address) soc.send(message, 0) rescue nil ensure soc.close if soc end end ## # RingProvider uses a RingServer advertised TupleSpace as a name service. # TupleSpace clients can register themselves with the remote TupleSpace and # look up other provided services via the remote TupleSpace. # # Services are registered with a tuple of the format [:name, klass, # DRbObject, description]. class RingProvider ## # Creates a RingProvider that will provide a +klass+ service running on # +front+, with a +description+. +renewer+ is optional. def initialize(klass, front, desc, renewer = nil) @tuple = [:name, klass, front, desc] @renewer = renewer || Rinda::SimpleRenewer.new end ## # Advertises this service on the primary remote TupleSpace. def provide ts = Rinda::RingFinger.primary ts.write(@tuple, @renewer) end end end if __FILE__ == $0 DRb.start_service case ARGV.shift when 's' require 'rinda/tuplespace' ts = Rinda::TupleSpace.new Rinda::RingServer.new(ts) $stdin.gets when 'w' finger = Rinda::RingFinger.new(nil) finger.lookup_ring do |ts2| p ts2 ts2.write([:hello, :world]) end when 'r' finger = Rinda::RingFinger.new(nil) finger.lookup_ring do |ts2| p ts2 p ts2.take([nil, nil]) end end end