2020-09-30 09:10:11 +00:00
---
stage: Enablement
group: Database
2020-11-26 06:09:20 +00:00
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments
2020-09-30 09:10:11 +00:00
---
2021-01-28 12:09:54 +00:00
# PostgreSQL replication and failover with Omnibus GitLab **(PREMIUM SELF)**
2020-06-11 09:08:16 +00:00
2020-09-30 09:10:11 +00:00
This document focuses on configuration supported with [GitLab Premium ](https://about.gitlab.com/pricing/ ), using the Omnibus GitLab package.
If you're a Community Edition or Starter user, consider using a cloud hosted solution.
This document doesn't cover installations from source.
2020-06-30 15:08:48 +00:00
2020-09-30 09:10:11 +00:00
If a setup with replication and failover isn't what you were looking for, see
2020-06-30 15:08:48 +00:00
the [database configuration document ](https://docs.gitlab.com/omnibus/settings/database.html )
for the Omnibus GitLab packages.
It's recommended to read this document fully before attempting to configure PostgreSQL with
replication and failover for GitLab.
2020-06-11 09:08:16 +00:00
## Architecture
The Omnibus GitLab recommended configuration for a PostgreSQL cluster with
replication and failover requires:
- A minimum of three database nodes.
- A minimum of three `Consul` server nodes.
- A minimum of one `pgbouncer` service node, but it's recommended to have one
per database node.
- An internal load balancer (TCP) is required when there is more than one
`pgbouncer` service node.
![PostgreSQL HA Architecture ](img/pg_ha_architecture.png )
You also need to take into consideration the underlying network topology, making
sure you have redundant connectivity between all Database and GitLab instances
to avoid the network becoming a single point of failure.
2020-12-04 21:09:29 +00:00
NOTE:
2020-07-31 15:10:14 +00:00
As of GitLab 13.3, PostgreSQL 12 is shipped with Omnibus GitLab. Clustering for PostgreSQL 12 is only supported with
Patroni. See the [Patroni ](#patroni ) section for further details. The support for repmgr will not be extended beyond
PostgreSQL 11.
2020-06-11 09:08:16 +00:00
### Database node
Each database node runs three services:
`PostgreSQL` - The database itself.
2020-12-17 21:09:57 +00:00
`Patroni` - Communicates with other patroni services in the cluster and handles
failover when issues with the leader server occurs. The failover procedure
2020-06-11 09:08:16 +00:00
consists of:
2020-12-17 21:09:57 +00:00
- Selecting a new leader for the cluster.
- Promoting the new node to leader.
- Instructing remaining servers to follow the new leader node.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
`Consul` agent - To communicate with Consul cluster which stores the current Patroni state. The agent monitors the status of each node in the database cluster and tracks its health in a service definition on the Consul cluster.
2020-06-11 09:08:16 +00:00
### Consul server node
2020-12-17 21:09:57 +00:00
The Consul server node runs the Consul server service. These nodes must have reached the quorum and elected a leader _before_ Patroni cluster bootstrap otherwise database nodes will wait until such Consul leader is elected.
2020-06-11 09:08:16 +00:00
### PgBouncer node
Each PgBouncer node runs two services:
`PgBouncer` - The database connection pooler itself.
`Consul` agent - Watches the status of the PostgreSQL service definition on the
Consul cluster. If that status changes, Consul runs a script which updates the
PgBouncer configuration to point to the new PostgreSQL master node and reloads
the PgBouncer service.
### Connection flow
Each service in the package comes with a set of [default ports ](https://docs.gitlab.com/omnibus/package-information/defaults.html#ports ). You may need to make specific firewall rules for the connections listed below:
- Application servers connect to either PgBouncer directly via its [default port ](https://docs.gitlab.com/omnibus/package-information/defaults.html#pgbouncer ) or via a configured Internal Load Balancer (TCP) that serves multiple PgBouncers.
- PgBouncer connects to the primary database servers [PostgreSQL default port ](https://docs.gitlab.com/omnibus/package-information/defaults.html#postgresql )
2020-12-17 21:09:57 +00:00
- Patroni actively manages the running PostgreSQL processes and configuration.
2020-06-11 09:08:16 +00:00
- PostgreSQL secondaries connect to the primary database servers [PostgreSQL default port ](https://docs.gitlab.com/omnibus/package-information/defaults.html#postgresql )
- Consul servers and agents connect to each others [Consul default ports ](https://docs.gitlab.com/omnibus/package-information/defaults.html#consul )
## Setting it up
### Required information
Before proceeding with configuration, you will need to collect all the necessary
information.
#### Network information
2020-10-02 21:08:18 +00:00
PostgreSQL doesn't listen on any network interface by default. It needs to know
which IP address to listen on to be accessible to other services. Similarly,
PostgreSQL access is controlled based on the network source.
2020-06-11 09:08:16 +00:00
This is why you will need:
- IP address of each nodes network interface. This can be set to `0.0.0.0` to
listen on all interfaces. It cannot be set to the loopback address `127.0.0.1` .
- Network Address. This can be in subnet (i.e. `192.168.0.0/255.255.255.0` )
or CIDR (i.e. `192.168.0.0/24` ) form.
#### Consul information
When using default setup, minimum configuration requires:
2020-07-30 12:09:33 +00:00
- `CONSUL_USERNAME` . The default user for Omnibus GitLab is `gitlab-consul`
2020-06-11 09:08:16 +00:00
- `CONSUL_DATABASE_PASSWORD` . Password for the database user.
- `CONSUL_PASSWORD_HASH` . This is a hash generated out of Consul username/password pair.
Can be generated with:
```shell
sudo gitlab-ctl pg-password-md5 CONSUL_USERNAME
```
- `CONSUL_SERVER_NODES` . The IP addresses or DNS records of the Consul server nodes.
Few notes on the service itself:
- The service runs under a system account, by default `gitlab-consul` .
- If you are using a different username, you will have to specify it. We
will refer to it with `CONSUL_USERNAME` ,
- There will be a database user created with read only access to the repmgr
database
- Passwords will be stored in the following locations:
- `/etc/gitlab/gitlab.rb` : hashed
- `/var/opt/gitlab/pgbouncer/pg_auth` : hashed
- `/var/opt/gitlab/consul/.pgpass` : plaintext
#### PostgreSQL information
When configuring PostgreSQL, we will set `max_wal_senders` to one more than
the number of database nodes in the cluster.
This is used to prevent replication from using up all of the
available database connections.
In this document we are assuming 3 database nodes, which makes this configuration:
```ruby
2020-12-17 21:09:57 +00:00
patroni['postgresql']['max_wal_senders'] = 4
2020-06-11 09:08:16 +00:00
```
As previously mentioned, you'll have to prepare the network subnets that will
be allowed to authenticate with the database.
You'll also need to supply the IP addresses or DNS records of Consul
server nodes.
We will need the following password information for the application's database user:
2020-07-30 12:09:33 +00:00
- `POSTGRESQL_USERNAME` . The default user for Omnibus GitLab is `gitlab`
2020-06-11 09:08:16 +00:00
- `POSTGRESQL_USER_PASSWORD` . The password for the database user
- `POSTGRESQL_PASSWORD_HASH` . This is a hash generated out of the username/password pair.
Can be generated with:
```shell
sudo gitlab-ctl pg-password-md5 POSTGRESQL_USERNAME
```
#### PgBouncer information
When using default setup, minimum configuration requires:
2020-07-30 12:09:33 +00:00
- `PGBOUNCER_USERNAME` . The default user for Omnibus GitLab is `pgbouncer`
2020-06-11 09:08:16 +00:00
- `PGBOUNCER_PASSWORD` . This is a password for PgBouncer service.
- `PGBOUNCER_PASSWORD_HASH` . This is a hash generated out of PgBouncer username/password pair.
Can be generated with:
```shell
sudo gitlab-ctl pg-password-md5 PGBOUNCER_USERNAME
```
- `PGBOUNCER_NODE` , is the IP address or a FQDN of the node running PgBouncer.
Few notes on the service itself:
- The service runs as the same system account as the database
- In the package, this is by default `gitlab-psql`
- If you use a non-default user account for PgBouncer service (by default `pgbouncer` ), you will have to specify this username. We will refer to this requirement with `PGBOUNCER_USERNAME` .
- The service will have a regular database user account generated for it
- This defaults to `repmgr`
- Passwords will be stored in the following locations:
- `/etc/gitlab/gitlab.rb` : hashed, and in plain text
- `/var/opt/gitlab/pgbouncer/pg_auth` : hashed
### Installing Omnibus GitLab
First, make sure to [download/install ](https://about.gitlab.com/install/ )
Omnibus GitLab **on each node** .
Make sure you install the necessary dependencies from step 1,
add GitLab package repository from step 2.
When installing the GitLab package, do not supply `EXTERNAL_URL` value.
### Configuring the Database nodes
2020-08-01 03:09:36 +00:00
1. Make sure to [configure the Consul nodes ](../consul.md ).
2020-06-11 09:08:16 +00:00
1. Make sure you collect [`CONSUL_SERVER_NODES` ](#consul-information ), [`PGBOUNCER_PASSWORD_HASH` ](#pgbouncer-information ), [`POSTGRESQL_PASSWORD_HASH` ](#postgresql-information ), the [number of db nodes ](#postgresql-information ), and the [network address ](#network-information ) before executing the next step.
2020-12-17 21:09:57 +00:00
#### Configuring Patroni cluster
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
You must enable Patroni explicitly to be able to use it (with `patroni['enable'] = true` ). When Patroni is enabled
repmgr will be disabled automatically.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
Any PostgreSQL configuration item that controls replication, for example `wal_level` , `max_wal_senders` , etc, are strictly
controlled by Patroni and will override the original settings that you make with the `postgresql[...]` configuration key.
Hence, they are all separated and placed under `patroni['postgresql'][...]` . This behavior is limited to replication.
Patroni honours any other PostgreSQL configuration that was made with the `postgresql[...]` configuration key. For example,
`max_wal_senders` by default is set to `5` . If you wish to change this you must set it with the `patroni['postgresql']['max_wal_senders']`
configuration key.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
NOTE:
The configuration of a Patroni node is very similar to a repmgr but shorter. When Patroni is enabled, first you can ignore
any replication setting of PostgreSQL (it will be overwritten anyway). Then you can remove any `repmgr[...]` or
repmgr-specific configuration as well. Especially, make sure that you remove `postgresql['shared_preload_libraries'] = 'repmgr_funcs'` .
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
Here is an example similar to [the one that was done with repmgr ](#configuring-repmgr-nodes ):
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```ruby
# Disable all components except PostgreSQL, Patroni (or Repmgr), and Consul
roles['postgres_role']
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
# Enable Patroni (which automatically disables Repmgr).
patroni['enable'] = true
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
# PostgreSQL configuration
postgresql['listen_address'] = '0.0.0.0'
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
# Disable automatic database migrations
gitlab_rails['auto_migrate'] = false
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
# Configure the Consul agent
consul['services'] = %w(postgresql)
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
# START user configuration
# Please set the real values as explained in Required Information section
#
# Replace PGBOUNCER_PASSWORD_HASH with a generated md5 value
postgresql['pgbouncer_user_password'] = 'PGBOUNCER_PASSWORD_HASH'
# Replace POSTGRESQL_PASSWORD_HASH with a generated md5 value
postgresql['sql_user_password'] = 'POSTGRESQL_PASSWORD_HASH'
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
# Replace X with value of number of db nodes + 1 (OPTIONAL the default value is 5)
patroni['postgresql']['max_wal_senders'] = X
patroni['postgresql']['max_replication_slots'] = X
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
# Replace XXX.XXX.XXX.XXX/YY with Network Address
postgresql['trust_auth_cidr_addresses'] = %w(XXX.XXX.XXX.XXX/YY)
# Replace placeholders:
#
# Y.Y.Y.Y consul1.gitlab.example.com Z.Z.Z.Z
# with the addresses gathered for CONSUL_SERVER_NODES
consul['configuration'] = {
retry_join: %w(Y.Y.Y.Y consul1.gitlab.example.com Z.Z.Z.Z)
}
#
# END user configuration
```
You do not need an additional or different configuration for replica nodes. As a matter of fact, you don't have to have
a predetermined primary node. Therefore all database nodes use the same configuration.
Once the configuration of a node is done, you must [reconfigure Omnibus GitLab ](../restart_gitlab.md#omnibus-gitlab-reconfigure )
on each node for the changes to take effect.
Generally, when Consul cluster is ready, the first node that [reconfigures ](../restart_gitlab.md#omnibus-gitlab-reconfigure )
becomes the leader. You do not need to sequence the nodes reconfiguration. You can run them in parallel or in any order.
If you choose an arbitrary order you do not have any predetermined master.
NOTE:
As opposed to repmgr, once the nodes are reconfigured you do not need any further action or additional command to join
the replicas.
2020-06-11 09:08:16 +00:00
#### Enable Monitoring
> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/3786) in GitLab 12.0.
If you enable Monitoring, it must be enabled on **all** database servers.
1. Create/edit `/etc/gitlab/gitlab.rb` and add the following configuration:
```ruby
# Enable service discovery for Prometheus
consul['monitoring_service_discovery'] = true
# Set the network addresses that the exporters will listen on
node_exporter['listen_address'] = '0.0.0.0:9100'
postgres_exporter['listen_address'] = '0.0.0.0:9187'
```
1. Run `sudo gitlab-ctl reconfigure` to compile the configuration.
### Configuring the PgBouncer node
1. Make sure you collect [`CONSUL_SERVER_NODES` ](#consul-information ), [`CONSUL_PASSWORD_HASH` ](#consul-information ), and [`PGBOUNCER_PASSWORD_HASH` ](#pgbouncer-information ) before executing the next step.
2020-10-16 00:08:56 +00:00
1. One each node, edit the `/etc/gitlab/gitlab.rb` configuration file and replace values noted in the `# START user configuration` section as below:
2020-06-11 09:08:16 +00:00
```ruby
# Disable all components except PgBouncer and Consul agent
roles ['pgbouncer_role']
# Configure PgBouncer
pgbouncer['admin_users'] = %w(pgbouncer gitlab-consul)
# Configure Consul agent
consul['watchers'] = %w(postgresql)
# START user configuration
# Please set the real values as explained in Required Information section
# Replace CONSUL_PASSWORD_HASH with with a generated md5 value
# Replace PGBOUNCER_PASSWORD_HASH with with a generated md5 value
pgbouncer['users'] = {
'gitlab-consul': {
password: 'CONSUL_PASSWORD_HASH'
},
'pgbouncer': {
password: 'PGBOUNCER_PASSWORD_HASH'
}
}
# Replace placeholders:
#
# Y.Y.Y.Y consul1.gitlab.example.com Z.Z.Z.Z
# with the addresses gathered for CONSUL_SERVER_NODES
consul['configuration'] = {
retry_join: %w(Y.Y.Y.Y consul1.gitlab.example.com Z.Z.Z.Z)
}
#
# END user configuration
```
2020-12-04 21:09:29 +00:00
NOTE:
2020-06-11 09:08:16 +00:00
`pgbouncer_role` was introduced with GitLab 10.3.
1. Run `gitlab-ctl reconfigure`
1. Create a `.pgpass` file so Consul is able to
reload PgBouncer. Enter the `PGBOUNCER_PASSWORD` twice when asked:
```shell
gitlab-ctl write-pgpass --host 127.0.0.1 --database pgbouncer --user pgbouncer --hostuser gitlab-consul
```
2020-08-01 03:09:36 +00:00
1. [Enable monitoring ](../postgresql/pgbouncer.md#enable-monitoring )
2020-06-11 09:08:16 +00:00
#### PgBouncer Checkpoint
1. Ensure each node is talking to the current master:
```shell
gitlab-ctl pgb-console # You will be prompted for PGBOUNCER_PASSWORD
```
If there is an error `psql: ERROR: Auth failed` after typing in the
password, ensure you previously generated the MD5 password hashes with the correct
format. The correct format is to concatenate the password and the username:
`PASSWORDUSERNAME` . For example, `Sup3rS3cr3tpgbouncer` would be the text
needed to generate an MD5 password hash for the `pgbouncer` user.
1. Once the console prompt is available, run the following queries:
```shell
show databases ; show clients ;
```
The output should be similar to the following:
```plaintext
name | host | port | database | force_user | pool_size | reserve_pool | pool_mode | max_connections | current_connections
---------------------+-------------+------+---------------------+------------+-----------+--------------+-----------+-----------------+---------------------
gitlabhq_production | MASTER_HOST | 5432 | gitlabhq_production | | 20 | 0 | | 0 | 0
pgbouncer | | 6432 | pgbouncer | pgbouncer | 2 | 0 | statement | 0 | 0
(2 rows)
type | user | database | state | addr | port | local_addr | local_port | connect_time | request_time | ptr | link | remote_pid | tls
------+-----------+---------------------+---------+----------------+-------+------------+------------+---------------------+---------------------+-----------+------+------------+-----
C | pgbouncer | pgbouncer | active | 127.0.0.1 | 56846 | 127.0.0.1 | 6432 | 2017-08-21 18:09:59 | 2017-08-21 18:10:48 | 0x22b3880 | | 0 |
(2 rows)
```
#### Configure the internal load balancer
If you're running more than one PgBouncer node as recommended, then at this time you'll need to set up a TCP internal load balancer to serve each correctly. This can be done with any reputable TCP load balancer.
As an example here's how you could do it with [HAProxy ](https://www.haproxy.org/ ):
```plaintext
global
log /dev/log local0
log localhost local1 notice
log stdout format raw local0
defaults
log global
default-server inter 10s fall 3 rise 2
balance leastconn
frontend internal-pgbouncer-tcp-in
bind *:6432
mode tcp
option tcplog
default_backend pgbouncer
backend pgbouncer
mode tcp
option tcp-check
server pgbouncer1 < ip > :6432 check
server pgbouncer2 < ip > :6432 check
server pgbouncer3 < ip > :6432 check
```
Refer to your preferred Load Balancer's documentation for further guidance.
### Configuring the Application nodes
These will be the nodes running the `gitlab-rails` service. You may have other
attributes set, but the following need to be set.
1. Edit `/etc/gitlab/gitlab.rb` :
```ruby
# Disable PostgreSQL on the application node
postgresql['enable'] = false
gitlab_rails['db_host'] = 'PGBOUNCER_NODE' or 'INTERNAL_LOAD_BALANCER'
gitlab_rails['db_port'] = 6432
gitlab_rails['db_password'] = 'POSTGRESQL_USER_PASSWORD'
gitlab_rails['auto_migrate'] = false
```
1. [Reconfigure GitLab ](../restart_gitlab.md#omnibus-gitlab-reconfigure ) for the changes to take effect.
#### Application node post-configuration
Ensure that all migrations ran:
```shell
gitlab-rake gitlab:db:configure
```
> **Note**: If you encounter a `rake aborted!` error stating that PgBouncer is failing to connect to
PostgreSQL it may be that your PgBouncer node's IP address is missing from
PostgreSQL's `trust_auth_cidr_addresses` in `gitlab.rb` on your database nodes. See
[PgBouncer error `ERROR: pgbouncer cannot connect to server` ](#pgbouncer-error-error-pgbouncer-cannot-connect-to-server )
in the Troubleshooting section before proceeding.
2020-12-28 12:10:13 +00:00
### Backups
Do not backup or restore GitLab through a PgBouncer connection: this will cause a GitLab outage.
[Read more about this and how to reconfigure backups ](../../raketasks/backup_restore.md#backup-and-restore-for-installations-using-pgbouncer ).
2020-06-11 09:08:16 +00:00
### Ensure GitLab is running
2020-11-10 00:08:52 +00:00
At this point, your GitLab instance should be up and running. Verify you're able
to sign in, and create issues and merge requests. If you encounter issues, see
2020-06-11 09:08:16 +00:00
the [Troubleshooting section ](#troubleshooting ).
## Example configuration
2020-11-10 00:08:52 +00:00
This section describes several fully expanded example configurations.
2020-06-11 09:08:16 +00:00
### Example recommended setup
2020-11-10 00:08:52 +00:00
This example uses three Consul servers, three PgBouncer servers (with an
associated internal load balancer), three PostgreSQL servers, and one
application node.
2020-06-11 09:08:16 +00:00
We start with all servers on the same 10.6.0.0/16 private network range, they
can connect to each freely other on those addresses.
Here is a list and description of each machine and the assigned IP:
- `10.6.0.11` : Consul 1
- `10.6.0.12` : Consul 2
- `10.6.0.13` : Consul 3
- `10.6.0.20` : Internal Load Balancer
- `10.6.0.21` : PgBouncer 1
- `10.6.0.22` : PgBouncer 2
- `10.6.0.23` : PgBouncer 3
2020-12-17 21:09:57 +00:00
- `10.6.0.31` : PostgreSQL 1
- `10.6.0.32` : PostgreSQL 2
- `10.6.0.33` : PostgreSQL 3
2020-06-11 09:08:16 +00:00
- `10.6.0.41` : GitLab application
All passwords are set to `toomanysecrets` , please do not use this password or derived hashes and the `external_url` for GitLab is `http://gitlab.example.com` .
Please note that after the initial configuration, if a failover occurs, the PostgresSQL master will change to one of the available secondaries until it is failed back.
#### Example recommended setup for Consul servers
On each server edit `/etc/gitlab/gitlab.rb` :
```ruby
# Disable all components except Consul
roles ['consul_role']
consul['configuration'] = {
server: true,
retry_join: %w(10.6.0.11 10.6.0.12 10.6.0.13)
}
consul['monitoring_service_discovery'] = true
```
[Reconfigure Omnibus GitLab ](../restart_gitlab.md#omnibus-gitlab-reconfigure ) for the changes to take effect.
#### Example recommended setup for PgBouncer servers
On each server edit `/etc/gitlab/gitlab.rb` :
```ruby
# Disable all components except Pgbouncer and Consul agent
roles ['pgbouncer_role']
# Configure PgBouncer
pgbouncer['admin_users'] = %w(pgbouncer gitlab-consul)
pgbouncer['users'] = {
'gitlab-consul': {
password: '5e0e3263571e3704ad655076301d6ebe'
},
'pgbouncer': {
password: '771a8625958a529132abe6f1a4acb19c'
}
}
consul['watchers'] = %w(postgresql)
consul['enable'] = true
consul['configuration'] = {
retry_join: %w(10.6.0.11 10.6.0.12 10.6.0.13)
}
consul['monitoring_service_discovery'] = true
```
[Reconfigure Omnibus GitLab ](../restart_gitlab.md#omnibus-gitlab-reconfigure ) for the changes to take effect.
#### Internal load balancer setup
An internal load balancer (TCP) is then required to be setup to serve each PgBouncer node (in this example on the IP of `10.6.0.20` ). An example of how to do this can be found in the [PgBouncer Configure Internal Load Balancer ](#configure-the-internal-load-balancer ) section.
#### Example recommended setup for PostgreSQL servers
2020-12-17 21:09:57 +00:00
On database nodes edit `/etc/gitlab/gitlab.rb` :
2020-06-11 09:08:16 +00:00
```ruby
2020-12-17 21:09:57 +00:00
# Disable all components except PostgreSQL, Patroni (or Repmgr), and Consul
2020-06-11 09:08:16 +00:00
roles ['postgres_role']
# PostgreSQL configuration
postgresql['listen_address'] = '0.0.0.0'
postgresql['hot_standby'] = 'on'
postgresql['wal_level'] = 'replica'
2020-12-17 21:09:57 +00:00
# Enable Patroni (which automatically disables Repmgr).
patroni['enable'] = true
2020-06-11 09:08:16 +00:00
# Disable automatic database migrations
gitlab_rails['auto_migrate'] = false
postgresql['pgbouncer_user_password'] = '771a8625958a529132abe6f1a4acb19c'
postgresql['sql_user_password'] = '450409b85a0223a214b5fb1484f34d0f'
2020-12-17 21:09:57 +00:00
patroni['postgresql']['max_wal_senders'] = 4
2020-06-11 09:08:16 +00:00
postgresql['trust_auth_cidr_addresses'] = %w(10.6.0.0/16)
# Configure the Consul agent
consul['services'] = %w(postgresql)
consul['enable'] = true
consul['configuration'] = {
retry_join: %w(10.6.0.11 10.6.0.12 10.6.0.13)
}
consul['monitoring_service_discovery'] = true
```
[Reconfigure Omnibus GitLab ](../restart_gitlab.md#omnibus-gitlab-reconfigure ) for the changes to take effect.
2020-12-17 21:09:57 +00:00
#### Example recommended setup manual steps
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
After deploying the configuration follow these steps:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
1. Find the primary database node:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```shell
gitlab-ctl get-postgresql-primary
```
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
1. On the primary database node:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
Enable the `pg_trgm` and `btree_gist` extensions:
2020-06-11 09:08:16 +00:00
```shell
gitlab-psql -d gitlabhq_production
```
```shell
CREATE EXTENSION pg_trgm;
2020-07-22 12:09:42 +00:00
CREATE EXTENSION btree_gist;
2020-06-11 09:08:16 +00:00
```
2020-07-22 12:09:42 +00:00
1. On `10.6.0.41` , our application server:
2020-06-11 09:08:16 +00:00
2020-07-22 12:09:42 +00:00
Set `gitlab-consul` user's PgBouncer password to `toomanysecrets` :
2020-06-11 09:08:16 +00:00
```shell
gitlab-ctl write-pgpass --host 127.0.0.1 --database pgbouncer --user pgbouncer --hostuser gitlab-consul
```
2020-07-22 12:09:42 +00:00
Run database migrations:
2020-06-11 09:08:16 +00:00
```shell
gitlab-rake gitlab:db:configure
```
### Example minimal setup
This example uses 3 PostgreSQL servers, and 1 application node (with PgBouncer setup alongside).
It differs from the [recommended setup ](#example-recommended-setup ) by moving the Consul servers into the same servers we use for PostgreSQL.
2020-12-17 21:09:57 +00:00
The trade-off is between reducing server counts, against the increased operational complexity of needing to deal with PostgreSQL [failover ](#manual-failover-procedure-for-patroni ) procedures in addition to [Consul outage recovery ](../consul.md#outage-recovery ) on the same set of machines.
2020-06-11 09:08:16 +00:00
In this example we start with all servers on the same 10.6.0.0/16 private network range, they can connect to each freely other on those addresses.
Here is a list and description of each machine and the assigned IP:
2020-12-17 21:09:57 +00:00
- `10.6.0.21` : PostgreSQL 1
- `10.6.0.22` : PostgreSQL 2
- `10.6.0.23` : PostgreSQL 3
2020-06-11 09:08:16 +00:00
- `10.6.0.31` : GitLab application
All passwords are set to `toomanysecrets` , please do not use this password or derived hashes.
The `external_url` for GitLab is `http://gitlab.example.com`
Please note that after the initial configuration, if a failover occurs, the PostgresSQL master will change to one of the available secondaries until it is failed back.
#### Example minimal configuration for database servers
2020-12-17 21:09:57 +00:00
On database nodes edit `/etc/gitlab/gitlab.rb` :
2020-06-11 09:08:16 +00:00
```ruby
# Disable all components except PostgreSQL, Repmgr, and Consul
roles ['postgres_role']
# PostgreSQL configuration
postgresql['listen_address'] = '0.0.0.0'
postgresql['hot_standby'] = 'on'
postgresql['wal_level'] = 'replica'
2020-12-17 21:09:57 +00:00
# Enable Patroni (which automatically disables Repmgr).
patroni['enable'] = true
2020-06-11 09:08:16 +00:00
# Disable automatic database migrations
gitlab_rails['auto_migrate'] = false
# Configure the Consul agent
consul['services'] = %w(postgresql)
postgresql['pgbouncer_user_password'] = '771a8625958a529132abe6f1a4acb19c'
postgresql['sql_user_password'] = '450409b85a0223a214b5fb1484f34d0f'
2020-12-17 21:09:57 +00:00
patroni['postgresql']['max_wal_senders'] = 4
2020-06-11 09:08:16 +00:00
postgresql['trust_auth_cidr_addresses'] = %w(10.6.0.0/16)
consul['configuration'] = {
server: true,
retry_join: %w(10.6.0.21 10.6.0.22 10.6.0.23)
}
```
[Reconfigure Omnibus GitLab ](../restart_gitlab.md#omnibus-gitlab-reconfigure ) for the changes to take effect.
#### Example minimal configuration for application server
On the server edit `/etc/gitlab/gitlab.rb` :
```ruby
external_url 'http://gitlab.example.com'
gitlab_rails['db_host'] = '127.0.0.1'
gitlab_rails['db_port'] = 6432
gitlab_rails['db_password'] = 'toomanysecrets'
gitlab_rails['auto_migrate'] = false
postgresql['enable'] = false
pgbouncer['enable'] = true
consul['enable'] = true
# Configure PgBouncer
pgbouncer['admin_users'] = %w(pgbouncer gitlab-consul)
# Configure Consul agent
consul['watchers'] = %w(postgresql)
pgbouncer['users'] = {
'gitlab-consul': {
password: '5e0e3263571e3704ad655076301d6ebe'
},
'pgbouncer': {
password: '771a8625958a529132abe6f1a4acb19c'
}
}
consul['configuration'] = {
retry_join: %w(10.6.0.21 10.6.0.22 10.6.0.23)
}
```
[Reconfigure Omnibus GitLab ](../restart_gitlab.md#omnibus-gitlab-reconfigure ) for the changes to take effect.
#### Example minimal setup manual steps
The manual steps for this configuration are the same as for the [example recommended setup ](#example-recommended-setup-manual-steps ).
2020-12-17 21:09:57 +00:00
## Patroni
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
NOTE:
Using Patroni instead of Repmgr is supported for PostgreSQL 11 and required for PostgreSQL 12.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
Patroni is an opinionated solution for PostgreSQL high-availability. It takes the control of PostgreSQL, overrides its
configuration and manages its lifecycle (start, stop, restart). This is a more active approach when compared to repmgr.
Both repmgr and Patroni are both supported and available. But Patroni will be the default (and perhaps the only) option
for PostgreSQL 12 clustering and cascading replication for Geo deployments.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
The [architecture ](#example-recommended-setup-manual-steps ) (that was mentioned above) does not change for Patroni.
You do not need any special consideration for Patroni while provisioning your database nodes. Patroni heavily relies on
Consul to store the state of the cluster and elect a leader. Any failure in Consul cluster and its leader election will
propagate to Patroni cluster as well.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
Similar to repmgr, Patroni monitors the cluster and handles failover. When the primary node fails it works with Consul
to notify PgBouncer. However, as opposed to repmgr, on failure, Patroni handles the transitioning of the old primary to
a replica and rejoins it to the cluster automatically. So you do not need any manual operation for recovering the
cluster as you do with repmgr.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
With Patroni the connection flow is slightly different. Patroni on each node connects to Consul agent to join the
cluster. Only after this point it decides if the node is the primary or a replica. Based on this decision, it configures
and starts PostgreSQL which it communicates with directly over a Unix socket. This implies that if Consul cluster is not
functional or does not have a leader, Patroni and by extension PostgreSQL will not start. Patroni also exposes a REST
API which can be accessed via its [default port ](https://docs.gitlab.com/omnibus/package-information/defaults.html#patroni )
on each node.
2020-12-17 09:10:19 +00:00
2020-12-22 15:09:51 +00:00
### Selecting the appropriate Patroni replication method
[Review the Patroni documentation carefully ](https://patroni.readthedocs.io/en/latest/SETTINGS.html#postgresql )
before making changes as **_some of the options carry a risk of potential data
loss if not fully understood_**. The [replication mode ](https://patroni.readthedocs.io/en/latest/replication_modes.html )
configured determines the amount of tolerable data loss.
WARNING:
Replication is not a backup strategy! There is no replacement for a well-considered and tested backup solution.
Omnibus GitLab defaults [`synchronous_commit` ](https://www.postgresql.org/docs/11/runtime-config-wal.html#GUC-SYNCHRONOUS-COMMIT ) to `on` .
```ruby
postgresql['synchronous_commit'] = 'on'
gitlab['geo-postgresql']['synchronous_commit'] = 'on'
```
#### Customizing Patroni failover behavior
Omnibus GitLab exposes several options allowing more control over the [Patroni restoration process ](#recovering-the-patroni-cluster ).
Each option is shown below with its default value in `/etc/gitlab/gitlab.rb` .
```ruby
patroni['use_pg_rewind'] = true
patroni['remove_data_directory_on_rewind_failure'] = false
patroni['remove_data_directory_on_diverged_timelines'] = false
```
[The upstream documentation will always be more up to date ](https://patroni.readthedocs.io/en/latest/SETTINGS.html#postgresql ), but the table below should provide a minimal overview of functionality.
|Setting|Overview|
|-|-|
|`use_pg_rewind`|Try running `pg_rewind` on the former cluster leader before it rejoins the database cluster.|
|`remove_data_directory_on_rewind_failure`|If `pg_rewind` fails, remove the local PostgreSQL data directory and re-replicate from the current cluster leader.|
|`remove_data_directory_on_diverged_timelines`|If `pg_rewind` cannot be used and the former leader's timeline has diverged from the current one, then delete the local data directory and re-replicate from the current cluster leader.|
2020-12-17 21:09:57 +00:00
### Database authorization for Patroni
2020-12-17 09:10:19 +00:00
2020-12-17 21:09:57 +00:00
Patroni uses Unix socket to manage PostgreSQL instance. Therefore, the connection from the `local` socket must be trusted.
2020-12-17 09:10:19 +00:00
2020-12-17 21:09:57 +00:00
Also, replicas use the replication user (`gitlab_replicator` by default) to communicate with the leader. For this user,
you can choose between `trust` and `md5` authentication. If you set `postgresql['sql_replication_password']` ,
Patroni will use `md5` authentication, otherwise it falls back to `trust` . You must to specify the cluster CIDR in
`postgresql['md5_auth_cidr_addresses']` or `postgresql['trust_auth_cidr_addresses']` respectively.
2020-12-17 09:10:19 +00:00
2020-12-17 21:09:57 +00:00
### Interacting with Patroni cluster
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
You can use `gitlab-ctl patroni members` to check the status of the cluster members. To check the status of each node
`gitlab-ctl patroni` provides two additional sub-commands, `check-leader` and `check-replica` which indicate if a node
is the primary or a replica.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
When Patroni is enabled, you don't have direct control over `postgresql` service. Patroni will signal PostgreSQL's startup,
shutdown, and restart. For example, for shutting down PostgreSQL on a node, you must shutdown Patroni on the same node
with:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```shell
sudo gitlab-ctl stop patroni
```
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
Note that stopping or restarting Patroni service on the leader node will trigger the automatic failover. If you
want to signal Patroni to reload its configuration or restart PostgreSQL process without triggering the failover, you
must use the `reload` or `restart` sub-commands of `gitlab-ctl patroni` instead. These two sub-commands are wrappers of
the same `patronictl` commands.
2020-06-11 09:08:16 +00:00
2021-01-14 12:10:54 +00:00
### Manual failover procedure for Patroni
While Patroni supports automatic failover, you also have the ability to perform
a manual one, where you have two slightly different options:
- **Failover**: allows you to perform a manual failover when there are no healthy nodes.
You can perform this action in any PostgreSQL node:
```shell
sudo gitlab-ctl patroni failover
```
- **Switchover**: only works when the cluster is healthy and allows you to schedule a switchover (it can happen immediately).
You can perform this action in any PostgreSQL node:
```shell
sudo gitlab-ctl patroni switchover
```
For further details on this subject, see the
[Patroni documentation ](https://patroni.readthedocs.io/en/latest/rest_api.html#switchover-and-failover-endpoints ).
#### Geo secondary site considerations
Similar to `repmgr` , when a Geo secondary site is replicating from a primary site that uses `Patroni` and `PgBouncer` , [replicating through PgBouncer is not supported ](https://github.com/pgbouncer/pgbouncer/issues/382#issuecomment-517911529 ) and the secondary must replicate directly from the leader node in the `Patroni` cluster. Therefore, when there is an automatic or manual failover in the `Patroni` cluster, you will need to manually re-point your secondary site to replicate from the new leader with:
```shell
sudo gitlab-ctl replicate-geo-database --host=< new_leader_ip > --replication-slot=< slot_name >
```
Otherwise, the replication will not happen anymore, even if the original node gets re-added as a follower node. This will re-sync your secondary site database and may take a long time depending on the amount of data to sync. You may also need to run `gitlab-ctl reconfigure` if replication is still not working after re-syncing.
2020-12-17 21:09:57 +00:00
### Recovering the Patroni cluster
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
To recover the old primary and rejoin it to the cluster as a replica, you can simply start Patroni with:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```shell
sudo gitlab-ctl start patroni
```
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
No further configuration or intervention is needed.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
### Maintenance procedure for Patroni
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
With Patroni enabled, you can run a planned maintenance. If you want to do some maintenance work on one node and you
don't want Patroni to manage it, you can use put it into maintenance mode:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```shell
sudo gitlab-ctl patroni pause
```
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
When Patroni runs in a paused mode, it does not change the state of PostgreSQL. Once you are done you can resume Patroni:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```shell
sudo gitlab-ctl patroni resume
```
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
For further details, see [Patroni documentation on this subject ](https://patroni.readthedocs.io/en/latest/pause.html ).
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
### Switching from repmgr to Patroni
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
WARNING:
Although switching from repmgr to Patroni is fairly straightforward the other way around is not. Rolling back from
Patroni to repmgr can be complicated and may involve deletion of data directory. If you need to do that, please contact
GitLab support.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
You can switch an exiting database cluster to use Patroni instead of repmgr with the following steps:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
1. Stop repmgr on all replica nodes and lastly with the primary node:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```shell
sudo gitlab-ctl stop repmgrd
```
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
1. Stop PostgreSQL on all replica nodes:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```shell
sudo gitlab-ctl stop postgresql
```
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
NOTE:
Ensure that there is no `walsender` process running on the primary node.
`ps aux | grep walsender` must not show any running process.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
1. On the primary node, [configure Patroni ](#configuring-patroni-cluster ). Remove `repmgr` and any other
repmgr-specific configuration. Also remove any configuration that is related to PostgreSQL replication.
1. [Reconfigure Omnibus GitLab ](../restart_gitlab.md#omnibus-gitlab-reconfigure ) on the primary node. It will become
the leader. You can check this with:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```shell
sudo gitlab-ctl tail patroni
```
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
1. Repeat the last two steps for all replica nodes. `gitlab.rb` should look the same on all nodes.
1. Optional: You can remove `gitlab_repmgr` database and role on the primary.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
### Upgrading PostgreSQL major version in a Patroni cluster
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
As of GitLab 13.3, PostgreSQL 11.7 and 12.3 are both shipped with Omnibus GitLab, and as of GitLab 13.7
PostgreSQL 12 is used by default. If you want to upgrade to PostgreSQL 12 in versions prior to GitLab 13.7,
you must ask for it explicitly.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
WARNING:
The procedure for upgrading PostgreSQL in a Patroni cluster is different than when upgrading using repmgr.
The following outlines the key differences and important considerations that need to be accounted for when
upgrading PostgreSQL.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
Here are a few key facts that you must consider before upgrading PostgreSQL:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
- The main point is that you will have to **shut down the Patroni cluster** . This means that your
GitLab deployment will be down for the duration of database upgrade or, at least, as long as your leader
node is upgraded. This can be **a significant downtime depending on the size of your database** .
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
- Upgrading PostgreSQL creates a new data directory with a new control data. From Patroni's perspective
this is a new cluster that needs to be bootstrapped again. Therefore, as part of the upgrade procedure,
the cluster state, which is stored in Consul, will be wiped out. Once the upgrade is completed, Patroni
will be instructed to bootstrap a new cluster. **Note that this will change your _cluster ID_** .
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
- The procedures for upgrading leader and replicas are not the same. That is why it is important to use the
right procedure on each node.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
- Upgrading a replica node **deletes the data directory and resynchronizes it** from the leader using the
configured replication method (currently `pg_basebackup` is the only available option). It might take some
time for replica to catch up with the leader, depending on the size of your database.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
- An overview of the upgrade procedure is outlined in [Patoni's documentation ](https://patroni.readthedocs.io/en/latest/existing_data.html#major-upgrade-of-postgresql-version ).
You can still use `gitlab-ctl pg-upgrade` which implements this procedure with a few adjustments.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
Considering these, you should carefully plan your PostgreSQL upgrade:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
1. Find out which node is the leader and which node is a replica:
2020-06-11 09:08:16 +00:00
```shell
2020-12-17 21:09:57 +00:00
gitlab-ctl patroni members
2020-06-11 09:08:16 +00:00
```
2020-12-17 21:09:57 +00:00
NOTE:
`gitlab-ctl pg-upgrade` tries to detect the role of the node. If for any reason the auto-detection
does not work or you believe it did not detect the role correctly, you can use the `--leader` or `--replica`
arguments to manually override it.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
1. Stop Patroni **only on replicas** .
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```shell
sudo gitlab-ctl stop patroni
```
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
1. Enable the maintenance mode on the **application node** :
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```shell
sudo gitlab-ctl deploy-page up
```
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
1. Upgrade PostgreSQL on **the leader node** and make sure that the upgrade is completed successfully:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```shell
sudo gitlab-ctl pg-upgrade -V 12
```
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
1. Check the status of the leader and cluster. You can only proceed if you have a healthy leader:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```shell
gitlab-ctl patroni check-leader
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
# OR
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
gitlab-ctl patroni members
```
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
1. You can now disable the maintenance mode on the **application node** :
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```shell
sudo gitlab-ctl deploy-page down
```
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
1. Upgrade PostgreSQL **on replicas** (you can do this in parallel on all of them):
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```shell
sudo gitlab-ctl pg-upgrade -V 12
```
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
NOTE:
Reverting PostgreSQL upgrade with `gitlab-ctl revert-pg-upgrade` has the same considerations as
`gitlab-ctl pg-upgrade` . You should follow the same procedure by first stopping the replicas,
then reverting the leader, and finally reverting the replicas.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
## Repmgr
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
NOTE:
Using Patroni instead of Repmgr is supported for PostgreSQL 11 and required for PostgreSQL 12.
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
### Configuring Repmgr Nodes
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
1. On the master database node, edit `/etc/gitlab/gitlab.rb` replacing values noted in the `# START user configuration` section:
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
```ruby
# Disable all components except PostgreSQL and Repmgr and Consul
roles ['postgres_role']
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
# PostgreSQL configuration
postgresql['listen_address'] = '0.0.0.0'
postgresql['hot_standby'] = 'on'
postgresql['wal_level'] = 'replica'
postgresql['shared_preload_libraries'] = 'repmgr_funcs'
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
# Disable automatic database migrations
gitlab_rails['auto_migrate'] = false
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
# Configure the Consul agent
consul['services'] = %w(postgresql)
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
# START user configuration
# Please set the real values as explained in Required Information section
#
# Replace PGBOUNCER_PASSWORD_HASH with a generated md5 value
postgresql['pgbouncer_user_password'] = 'PGBOUNCER_PASSWORD_HASH'
# Replace POSTGRESQL_PASSWORD_HASH with a generated md5 value
postgresql['sql_user_password'] = 'POSTGRESQL_PASSWORD_HASH'
# Replace X with value of number of db nodes + 1
postgresql['max_wal_senders'] = X
postgresql['max_replication_slots'] = X
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
# Replace XXX.XXX.XXX.XXX/YY with Network Address
postgresql['trust_auth_cidr_addresses'] = %w(XXX.XXX.XXX.XXX/YY)
repmgr['trust_auth_cidr_addresses'] = %w(127.0.0.1/32 XXX.XXX.XXX.XXX/YY)
2020-06-11 09:08:16 +00:00
2020-12-17 21:09:57 +00:00
# Replace placeholders:
#
# Y.Y.Y.Y consul1.gitlab.example.com Z.Z.Z.Z
# with the addresses gathered for CONSUL_SERVER_NODES
consul['configuration'] = {
retry_join: %w(Y.Y.Y.Y consul1.gitlab.example.com Z.Z.Z.Z)
}
#
# END user configuration
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
> `postgres_role` was introduced with GitLab 10.3
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
1. On secondary nodes, add all the configuration specified above for primary node
to `/etc/gitlab/gitlab.rb` . In addition, append the following configuration
to inform `gitlab-ctl` that they are standby nodes initially and it need not
attempt to register them as primary node
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
```ruby
# Specify if a node should attempt to be master on initialization
repmgr['master_on_initialization'] = false
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
1. [Reconfigure GitLab ](../restart_gitlab.md#omnibus-gitlab-reconfigure ) for the changes to take effect.
1. [Enable Monitoring ](#enable-monitoring )
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
> Please note:
>
> - If you want your database to listen on a specific interface, change the configuration:
> `postgresql['listen_address'] = '0.0.0.0'`.
> - If your PgBouncer service runs under a different user account,
> you also need to specify: `postgresql['pgbouncer_user'] = PGBOUNCER_USERNAME` in
> your configuration.
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
#### Database nodes post-configuration
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
##### Primary node
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
Select one node as a primary node.
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
1. Open a database prompt:
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
```shell
gitlab-psql -d gitlabhq_production
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
1. Enable the `pg_trgm` extension:
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
```shell
CREATE EXTENSION pg_trgm;
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
1. Enable the `btree_gist` extension:
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
```shell
CREATE EXTENSION btree_gist;
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
1. Exit the database prompt by typing `\q` and Enter.
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
1. Verify the cluster is initialized with one node:
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
```shell
gitlab-ctl repmgr cluster show
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
The output should be similar to the following:
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
```plaintext
Role | Name | Upstream | Connection String
----------+----------|----------|----------------------------------------
* master | HOSTNAME | | host=HOSTNAME user=gitlab_repmgr dbname=gitlab_repmgr
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
1. Note down the hostname or IP address in the connection string: `host=HOSTNAME` . We will
refer to the hostname in the next section as `MASTER_NODE_NAME` . If the value
is not an IP address, it will need to be a resolvable name (via DNS or
`/etc/hosts` )
##### Secondary nodes
1. Set up the repmgr standby:
```shell
gitlab-ctl repmgr standby setup MASTER_NODE_NAME
```
Do note that this will remove the existing data on the node. The command
has a wait time.
The output should be similar to the following:
```console
# gitlab-ctl repmgr standby setup MASTER_NODE_NAME
Doing this will delete the entire contents of /var/opt/gitlab/postgresql/data
If this is not what you want, hit Ctrl-C now to exit
To skip waiting, rerun with the -w option
Sleeping for 30 seconds
Stopping the database
Removing the data
Cloning the data
Starting the database
Registering the node with the cluster
ok: run: repmgrd: (pid 19068) 0s
```
1. Verify the node now appears in the cluster:
```shell
gitlab-ctl repmgr cluster show
```
The output should be similar to the following:
```plaintext
Role | Name | Upstream | Connection String
----------+---------|-----------|------------------------------------------------
* master | MASTER | | host=MASTER_NODE_NAME user=gitlab_repmgr dbname=gitlab_repmgr
standby | STANDBY | MASTER | host=STANDBY_HOSTNAME user=gitlab_repmgr dbname=gitlab_repmgr
```
Repeat the above steps on all secondary nodes.
#### Database checkpoint
Before moving on, make sure the databases are configured correctly. Run the
following command on the **primary** node to verify that replication is working
properly:
```shell
gitlab-ctl repmgr cluster show
2020-06-30 09:08:37 +00:00
```
2020-12-17 21:09:57 +00:00
The output should be similar to:
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
```plaintext
Role | Name | Upstream | Connection String
----------+--------------|--------------|--------------------------------------------------------------------
* master | MASTER | | host=MASTER port=5432 user=gitlab_repmgr dbname=gitlab_repmgr
standby | STANDBY | MASTER | host=STANDBY port=5432 user=gitlab_repmgr dbname=gitlab_repmgr
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
If the 'Role' column for any node says "FAILED", check the
[Troubleshooting section ](#troubleshooting ) before proceeding.
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
Also, check that the check master command works successfully on each node:
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
```shell
su - gitlab-consul
gitlab-ctl repmgr-check-master || echo 'This node is a standby repmgr node'
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
This command relies on exit codes to tell Consul whether a particular node is a master
or secondary. The most important thing here is that this command does not produce errors.
If there are errors it's most likely due to incorrect `gitlab-consul` database user permissions.
Check the [Troubleshooting section ](#troubleshooting ) before proceeding.
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
### Repmgr failover procedure
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
By default, if the master database fails, `repmgrd` should promote one of the
standby nodes to master automatically, and Consul will update PgBouncer with
the new master.
If you need to failover manually, you have two options:
**Shutdown the current master database**
Run:
```shell
gitlab-ctl stop postgresql
```
The automated failover process will see this and failover to one of the
standby nodes.
**Or perform a manual failover**
1. Ensure the old master node is not still active.
1. Login to the server that should become the new master and run:
```shell
gitlab-ctl repmgr standby promote
```
1. If there are any other standby servers in the cluster, have them follow
the new master server:
```shell
gitlab-ctl repmgr standby follow NEW_MASTER
```
#### Geo secondary site considerations
When a Geo secondary site is replicating from a primary site that uses `repmgr` and `PgBouncer` , [replicating through PgBouncer is not supported ](https://github.com/pgbouncer/pgbouncer/issues/382#issuecomment-517911529 ) and the secondary must replicate directly from the leader node in the `repmgr` cluster. Therefore, when there is a failover in the `repmgr` cluster, you will need to manually re-point your secondary site to replicate from the new leader with:
```shell
sudo gitlab-ctl replicate-geo-database --host=< new_leader_ip > --replication-slot=< slot_name >
```
2021-01-14 12:10:54 +00:00
Otherwise, the replication will not happen anymore, even if the original node gets re-added as a follower node. This will re-sync your secondary site database and may take a long time depending on the amount of data to sync. You may also need to run `gitlab-ctl reconfigure` if replication is still not working after re-syncing.
2020-12-17 21:09:57 +00:00
### Repmgr Restore procedure
If a node fails, it can be removed from the cluster, or added back as a standby
after it has been restored to service.
#### Remove a standby from the cluster
From any other node in the cluster, run:
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
```shell
gitlab-ctl repmgr standby unregister --node=X
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
where X is the value of node in `repmgr.conf` on the old server.
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
To find this, you can use:
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
```shell
awk -F = '$1 == "node" { print $2 }' /var/opt/gitlab/postgresql/repmgr.conf
```
2020-10-08 09:08:40 +00:00
2020-12-17 21:09:57 +00:00
It will output something like:
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
```plaintext
959789412
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
Then you will use this ID to unregister the node:
2020-06-30 09:08:37 +00:00
2020-07-13 15:09:08 +00:00
```shell
2020-12-17 21:09:57 +00:00
gitlab-ctl repmgr standby unregister --node=959789412
2020-07-13 15:09:08 +00:00
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
#### Add a node as a standby server
From the standby node, run:
2020-06-30 09:08:37 +00:00
2020-07-13 15:09:08 +00:00
```shell
2020-12-17 21:09:57 +00:00
gitlab-ctl repmgr standby follow NEW_MASTER
gitlab-ctl restart repmgrd
2020-07-13 15:09:08 +00:00
```
2020-12-17 21:09:57 +00:00
WARNING:
When the server is brought back online, and before
you switch it to a standby node, repmgr will report that there are two masters.
If there are any clients that are still attempting to write to the old master,
this will cause a split, and the old master will need to be resynced from
scratch by performing a `gitlab-ctl repmgr standby setup NEW_MASTER` .
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
#### Add a failed master back into the cluster as a standby node
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
Once `repmgrd` and PostgreSQL are running, the node will need to follow the new
as a standby node.
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
```shell
gitlab-ctl repmgr standby follow NEW_MASTER
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
Once the node is following the new master as a standby, the node needs to be
[unregistered from the cluster on the new master node ](#remove-a-standby-from-the-cluster ).
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
Once the old master node has been unregistered from the cluster, it will need
to be setup as a new standby:
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
```shell
gitlab-ctl repmgr standby setup NEW_MASTER
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
Failure to unregister and read the old master node can lead to subsequent failovers
not working.
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
### Alternate configurations
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
#### Database authorization
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
By default, we give any host on the database network the permission to perform
repmgr operations using PostgreSQL's `trust` method. If you do not want this
level of trust, there are alternatives.
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
You can trust only the specific nodes that will be database clusters, or you
can require md5 authentication.
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
#### Trust specific addresses
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
If you know the IP address, or FQDN of all database and PgBouncer nodes in the
cluster, you can trust only those nodes.
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
In `/etc/gitlab/gitlab.rb` on all of the database nodes, set
`repmgr['trust_auth_cidr_addresses']` to an array of strings containing all of
the addresses.
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
If setting to a node's FQDN, they must have a corresponding PTR record in DNS.
If setting to a node's IP address, specify it as `XXX.XXX.XXX.XXX/32` .
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
For example:
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
```ruby
repmgr['trust_auth_cidr_addresses'] = %w(192.168.1.44/32 db2.example.com)
```
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
#### MD5 Authentication
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
If you are running on an untrusted network, repmgr can use md5 authentication
with a [`.pgpass` file ](https://www.postgresql.org/docs/11/libpq-pgpass.html )
to authenticate.
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
You can specify by IP address, FQDN, or by subnet, using the same format as in
the previous section:
2020-06-30 09:08:37 +00:00
2020-12-17 21:09:57 +00:00
1. On the current master node, create a password for the `gitlab` and
`gitlab_repmgr` user:
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
```shell
gitlab-psql -d template1
template1=# \password gitlab_repmgr
Enter password: ** **
Confirm password: ** **
template1=# \password gitlab
```
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
1. On each database node:
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
1. Edit `/etc/gitlab/gitlab.rb` :
1. Ensure `repmgr['trust_auth_cidr_addresses']` is **not** set
1. Set `postgresql['md5_auth_cidr_addresses']` to the desired value
1. Set `postgresql['sql_replication_user'] = 'gitlab_repmgr'`
1. Reconfigure with `gitlab-ctl reconfigure`
1. Restart PostgreSQL with `gitlab-ctl restart postgresql`
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
1. Create a `.pgpass` file. Enter the `gitlab_repmgr` password twice to
when asked:
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
```shell
gitlab-ctl write-pgpass --user gitlab_repmgr --hostuser gitlab-psql --database '*'
```
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
1. On each PgBouncer node, edit `/etc/gitlab/gitlab.rb` :
1. Ensure `gitlab_rails['db_password']` is set to the plaintext password for
the `gitlab` database user
1. [Reconfigure GitLab ](../restart_gitlab.md#omnibus-gitlab-reconfigure ) for the changes to take effect
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
## Troubleshooting
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
### Consul and PostgreSQL changes not taking effect
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
Due to the potential impacts, `gitlab-ctl reconfigure` only reloads Consul and PostgreSQL, it will not restart the services. However, not all changes can be activated by reloading.
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
To restart either service, run `gitlab-ctl restart SERVICE`
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
For PostgreSQL, it is usually safe to restart the master node by default. Automatic failover defaults to a 1 minute timeout. Provided the database returns before then, nothing else needs to be done. To be safe, you can stop `repmgrd` on the standby nodes first with `gitlab-ctl stop repmgrd` , then start afterwards with `gitlab-ctl start repmgrd` .
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
On the Consul server nodes, it is important to [restart the Consul service ](../consul.md#restart-consul ) in a controlled manner.
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
### `gitlab-ctl repmgr-check-master` command produces errors
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
If this command displays errors about database permissions it is likely that something failed during
install, resulting in the `gitlab-consul` database user getting incorrect permissions. Follow these
steps to fix the problem:
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
1. On the master database node, connect to the database prompt - `gitlab-psql -d template1`
1. Delete the `gitlab-consul` user - `DROP USER "gitlab-consul";`
1. Exit the database prompt - `\q`
1. [Reconfigure GitLab ](../restart_gitlab.md#omnibus-gitlab-reconfigure ) and the user will be re-added with the proper permissions.
1. Change to the `gitlab-consul` user - `su - gitlab-consul`
1. Try the check command again - `gitlab-ctl repmgr-check-master` .
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
Now there should not be errors. If errors still occur then there is another problem.
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
### PgBouncer error `ERROR: pgbouncer cannot connect to server`
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
You may get this error when running `gitlab-rake gitlab:db:configure` or you
may see the error in the PgBouncer log file.
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
```plaintext
PG::ConnectionBad: ERROR: pgbouncer cannot connect to server
```
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
The problem may be that your PgBouncer node's IP address is not included in the
`trust_auth_cidr_addresses` setting in `/etc/gitlab/gitlab.rb` on the database nodes.
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
You can confirm that this is the issue by checking the PostgreSQL log on the master
database node. If you see the following error then `trust_auth_cidr_addresses`
is the problem.
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
```plaintext
2018-03-29_13:59:12.11776 FATAL: no pg_hba.conf entry for host "123.123.123.123", user "pgbouncer", database "gitlabhq_production", SSL off
```
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
To fix the problem, add the IP address to `/etc/gitlab/gitlab.rb` .
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
```ruby
postgresql['trust_auth_cidr_addresses'] = %w(123.123.123.123/32 < other_cidrs > )
```
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
[Reconfigure GitLab ](../restart_gitlab.md#omnibus-gitlab-reconfigure ) for the changes to take effect.
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
### Issues with other components
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
If you're running into an issue with a component not outlined here, be sure to check the troubleshooting section of their specific documentation page:
2020-09-28 12:10:02 +00:00
2020-12-17 21:09:57 +00:00
- [Consul ](../consul.md#troubleshooting-consul )
- [PostgreSQL ](https://docs.gitlab.com/omnibus/settings/database.html#troubleshooting )