gitlab-org--gitlab-foss/doc/administration/audit_event_streaming.md

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

383 lines
11 KiB
Markdown
Raw Normal View History

---
stage: Manage
group: Compliance
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments
---
# Audit event streaming **(ULTIMATE)**
> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/332747) in GitLab 14.5 [with a flag](../administration/feature_flags.md) named `ff_external_audit_events_namespace`. Disabled by default.
> - [Enabled on GitLab.com and by default on self-managed](https://gitlab.com/gitlab-org/gitlab/-/issues/338939) in GitLab 14.7.
> - [Feature flag `ff_external_audit_events_namespace`](https://gitlab.com/gitlab-org/gitlab/-/issues/349588) removed in GitLab 14.8.
Event streaming allows owners of top-level groups to set an HTTP endpoint to receive **all** audit events about the group, and its
subgroups and projects as structured JSON.
Top-level group owners can manage their audit logs in third-party systems such as Splunk, using the Splunk
[HTTP Event Collector](https://docs.splunk.com/Documentation/Splunk/8.2.2/Data/UsetheHTTPEventCollector). Any service that can receive
structured JSON data can be used as the endpoint.
NOTE:
GitLab can stream a single event more than once to the same destination. Use the `id` key in the payload to deduplicate incoming data.
## Add a new event streaming destination
WARNING:
Event streaming destinations receive **all** audit event data, which could include sensitive information. Make sure you trust the destination endpoint.
### Use the GitLab UI
Users with at least the Owner role for a group can add event streaming destinations for it:
1. On the top bar, select **Menu > Groups** and find your group.
1. On the left sidebar, select **Security & Compliance > Audit events**
1. On the main area, select **Streams** tab.
- When the destination list is empty, select **Add stream** activate edit mode and add a new destination.
- When the destination list is not empty, select **{plus}** under the **Streams** tab to activate edit mode.
1. Enter the endpoint you wish to add and select **Add**.
Event streaming is enabled if:
- No warning is shown.
- The added endpoint is displayed in the UI.
### Use the API
To enable event streaming and add a destination, users with at least the Owner role for a group must use the
`externalAuditEventDestinationCreate` mutation in the GraphQL API.
```graphql
mutation {
externalAuditEventDestinationCreate(input: { destinationUrl: "https://mydomain.io/endpoint/ingest", groupPath: "my-group" } ) {
errors
externalAuditEventDestination {
destinationUrl
verificationToken
group {
name
}
}
}
}
```
Event streaming is enabled if:
- The returned `errors` object is empty.
- The API responds with `200 OK`.
## List streaming destinations
Users with at least the Owner role for a group can list event streaming destinations.
### Use the GitLab UI
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/336411) in GitLab 14.9.
Users with at least the Owner role for a group can list event streaming destinations:
1. On the top bar, select **Menu > Groups** and find your group.
1. On the left sidebar, select **Security & Compliance > Audit events**
1. On the main area, select **Streams** tab.
### Use the API
Users with at least the Owner role for a group can view a list of event streaming destinations at any time using the
`externalAuditEventDestinations` query type.
```graphql
query {
group(fullPath: "my-group") {
id
externalAuditEventDestinations {
nodes {
destinationUrl
verificationToken
id
}
}
}
}
```
If the resulting list is empty, then audit event streaming is not enabled for that group.
## Delete streaming destinations
Users with at least the Owner role for a group can delete event streaming destinations using the
`deleteAuditEventDestinations` mutation type.
When the last destination is successfully deleted, event streaming is disabled for the group.
### Use the GitLab UI
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/336411) in GitLab 14.9.
Users with at least the Owner role for a group can delete event streaming destinations.
1. On the top bar, select **Menu > Groups** and find your group.
1. On the left sidebar, select **Security & Compliance > Audit events**
1. On the main area, select **Streams** tab.
1. Select **{remove}** at the right side of each item.
The external streaming destination is deleted when:
- No warning is shown.
- The deleted endpoint is not displayed in the UI.
### Use the API
Delete an event streaming destination by specifying an ID. Get the required ID by
[listing the details](audit_event_streaming.md#use-the-api-1) of event
streaming destinations.
```graphql
mutation{
externalAuditEventDestinationDestroy(input: { id: destination }) {
errors
}
}
```
Destination is deleted if:
- The returned `errors` object is empty.
- The API responds with `200 OK`.
## Verify event authenticity
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/345424) in GitLab 14.8.
Each streaming destination has a unique verification token (`verificationToken`) that can be used to verify the authenticity of the event. This
token is generated when the event destination is created and cannot be changed.
Each streamed event contains a random alphanumeric identifier for the `X-Gitlab-Event-Streaming-Token` HTTP header that can be verified against
the destination's value when [listing streaming destinations](#list-streaming-destinations).
## Audit event streaming on Git operations
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/332747) in GitLab 14.9 [with a flag](../administration/feature_flags.md) named `audit_event_streaming_git_operations`. Disabled by default.
FLAG:
On self-managed GitLab, by default this feature is not available. To make it available, ask an administrator to [enable the feature flag](feature_flags.md) named `audit_event_streaming_git_operations`. On GitLab.com, this feature is not available.
Streaming audit events can be sent when signed-in users push or pull a project's remote Git repositories:
- [Using SSH](../user/ssh.md).
- Using HTTP or HTTPS.
- Using the **Download** button (**{download}**) in GitLab UI.
Audit events are not captured for users that are not signed in. For example, when downloading a public project.
To configure streaming audit events for Git operations, see [Add a new event streaming destination](#add-a-new-event-streaming-destination).
### Headers
Headers are formatted as follows:
```plaintext
POST /logs HTTP/1.1
Host: <DESTINATION_HOST>
Content-Type: application/x-www-form-urlencoded
X-Gitlab-Event-Streaming-Token: <DESTINATION_TOKEN>
```
### Example payloads for SSH events
Fetch:
```json
{
"id": 1,
"author_id": 1,
"entity_id": 29,
"entity_type": "Project",
"details": {
"author_name": "Administrator",
"target_id": 29,
"target_type": "Project",
"target_details": "example-project",
"custom_message": {
"protocol": "ssh",
"action": "git-upload-pack"
},
"ip_address": "127.0.0.1",
"entity_path": "example-group/example-project"
},
"ip_address": "127.0.0.1",
"author_name": "Administrator",
"entity_path": "example-group/example-project",
"target_details": "example-project",
"created_at": "2022-02-23T06:21:05.283Z",
"target_type": "Project",
"target_id": 29
}
```
Push:
```json
{
"id": 1,
"author_id": 1,
"entity_id": 29,
"entity_type": "Project",
"details": {
"author_name": "Administrator",
"target_id": 29,
"target_type": "Project",
"target_details": "example-project",
"custom_message": {
"protocol": "ssh",
"action": "git-receive-pack"
},
"ip_address": "127.0.0.1",
"entity_path": "example-group/example-project"
},
"ip_address": "127.0.0.1",
"author_name": "Administrator",
"entity_path": "example-group/example-project",
"target_details": "example-project",
"created_at": "2022-02-23T06:23:08.746Z",
"target_type": "Project",
"target_id": 29
}
```
### Example payloads for HTTP and HTTPS events
Fetch:
```json
{
"id": 1,
"author_id": 1,
"entity_id": 29,
"entity_type": "Project",
"details": {
"author_name": "Administrator",
"target_id": 29,
"target_type": "Project",
"target_details": "example-project",
"custom_message": {
"protocol": "http",
"action": "git-upload-pack"
},
"ip_address": "127.0.0.1",
"entity_path": "example-group/example-project"
},
"ip_address": "127.0.0.1",
"author_name": "Administrator",
"entity_path": "example-group/example-project",
"target_details": "example-project",
"created_at": "2022-02-23T06:25:43.938Z",
"target_type": "Project",
"target_id": 29
}
```
Push:
```json
{
"id": 1,
"author_id": 1,
"entity_id": 29,
"entity_type": "Project",
"details": {
"author_name": "Administrator",
"target_id": 29,
"target_type": "Project",
"target_details": "example-project",
"custom_message": {
"protocol": "http",
"action": "git-receive-pack"
},
"ip_address": "127.0.0.1",
"entity_path": "example-group/example-project"
},
"ip_address": "127.0.0.1",
"author_name": "Administrator",
"entity_path": "example-group/example-project",
"target_details": "example-project",
"created_at": "2022-02-23T06:26:29.294Z",
"target_type": "Project",
"target_id": 29
}
```
### Example payloads for events from GitLab UI download button
Fetch:
```json
{
"id": 1,
"author_id": 99,
"entity_id": 29,
"entity_type": "Project",
"details": {
"custom_message": "Repository Download Started",
"author_name": "example_username",
"target_id": 29,
"target_type": "Project",
"target_details": "example-group/example-project",
"ip_address": "127.0.0.1",
"entity_path": "example-group/example-project"
},
"ip_address": "127.0.0.1",
"author_name": "example_username",
"entity_path": "example-group/example-project",
"target_details": "example-group/example-project",
"created_at": "2022-02-23T06:27:17.873Z",
"target_type": "Project",
"target_id": 29
}
```
## Audit event streaming on merge request approval actions
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/271162) in GitLab 14.9.
Stream audit events that relate to merge approval actions performed within a project.
### Headers
Headers are formatted as follows:
```plaintext
POST /logs HTTP/1.1
Host: <DESTINATION_HOST>
Content-Type: application/x-www-form-urlencoded
X-Gitlab-Event-Streaming-Token: <DESTINATION_TOKEN>
```
### Example payload
```json
{
"id": 1,
"author_id": 1,
"entity_id": 6,
"entity_type": "Project",
"details": {
"author_name": "example_username",
"target_id": 20,
"target_type": "MergeRequest",
"target_details": "merge request title",
"custom_message": "Approved merge request",
"ip_address": "127.0.0.1",
"entity_path": "example-group/example-project"
},
"ip_address": "127.0.0.1",
"author_name": "example_username",
"entity_path": "example-group/example-project",
"target_details": "merge request title",
"created_at": "2022-03-09T06:53:11.181Z",
"target_type": "MergeRequest",
"target_id": 20
}
```