gitlab-org--gitlab-foss/doc/administration/pages/source.md

393 lines
12 KiB
Markdown
Raw Normal View History

# GitLab Pages administration for source installations
This is the documentation for configuring a GitLab Pages when you have installed
GitLab from source and not using the Omnibus packages.
You are encouraged to read the [Omnibus documentation](index.md) as it provides
some invaluable information to the configuration of GitLab Pages. Please proceed
to read it before going forward with this guide.
We also highly recommend that you use the Omnibus GitLab packages, as we
optimize them specifically for GitLab, and we will take care of upgrading GitLab
Pages to the latest supported version.
## Overview
[Read the Omnibus overview section.](index.md#overview)
## Prerequisites
Before proceeding with the Pages configuration, you will need to:
1. Have a separate domain under which the GitLab Pages will be served. In this
document we assume that to be `example.io`.
1. Configure a **wildcard DNS record**.
1. (Optional) Have a **wildcard certificate** for that domain if you decide to
serve Pages under HTTPS.
1. (Optional but recommended) Enable [Shared runners](../../ci/runners/README.md)
so that your users don't have to bring their own.
### DNS configuration
GitLab Pages expect to run on their own virtual host. In your DNS server/provider
you need to add a [wildcard DNS A record][wiki-wildcard-dns] pointing to the
host that GitLab runs. For example, an entry would look like this:
```
*.example.io. 1800 IN A 1.1.1.1
```
where `example.io` is the domain under which GitLab Pages will be served
and `1.1.1.1` is the IP address of your GitLab instance.
> **Note:**
You should not use the GitLab domain to serve user pages. For more information
see the [security section](#security).
[wiki-wildcard-dns]: https://en.wikipedia.org/wiki/Wildcard_DNS_record
## Configuration
Depending on your needs, you can set up GitLab Pages in 4 different ways.
The following options are listed from the easiest setup to the most
advanced one. The absolute minimum requirement is to set up the wildcard DNS
since that is needed in all configurations.
### Wildcard domains
>**Requirements:**
- [Wildcard DNS setup](#dns-configuration)
>
>---
>
URL scheme: `http://page.example.io`
This is the minimum setup that you can use Pages with. It is the base for all
other setups as described below. Nginx will proxy all requests to the daemon.
The Pages daemon doesn't listen to the outside world.
1. Install the Pages daemon:
```
cd /home/git
sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-pages.git
cd gitlab-pages
sudo -u git -H git checkout v0.2.4
sudo -u git -H make
```
1. Go to the GitLab installation directory:
```bash
cd /home/git/gitlab
```
1. Edit `gitlab.yml` and under the `pages` setting, set `enabled` to `true` and
the `host` to the FQDN under which GitLab Pages will be served:
```yaml
## GitLab Pages
pages:
enabled: true
# The location where pages are stored (default: shared/pages).
# path: shared/pages
host: example.io
port: 80
https: false
```
1. Copy the `gitlab-pages-ssl` Nginx configuration file:
```bash
sudo cp lib/support/nginx/gitlab-pages-ssl /etc/nginx/sites-available/gitlab-pages-ssl.conf
sudo ln -sf /etc/nginx/sites-{available,enabled}/gitlab-pages-ssl.conf
```
Replace `gitlab-pages-ssl` with `gitlab-pages` if you are not using SSL.
1. Restart NGINX
1. [Restart GitLab][restart]
### Wildcard domains with TLS support
>**Requirements:**
- [Wildcard DNS setup](#dns-configuration)
- Wildcard TLS certificate
>
>---
>
URL scheme: `https://page.example.io`
Nginx will proxy all requests to the daemon. Pages daemon doesn't listen to the
outside world.
1. Install the Pages daemon:
```
cd /home/git
sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-pages.git
cd gitlab-pages
sudo -u git -H git checkout v0.2.4
sudo -u git -H make
```
1. In `gitlab.yml`, set the port to `443` and https to `true`:
```bash
## GitLab Pages
pages:
enabled: true
# The location where pages are stored (default: shared/pages).
# path: shared/pages
host: example.io
port: 443
https: true
```
1. Copy the `gitlab-pages-ssl` Nginx configuration file:
```bash
sudo cp lib/support/nginx/gitlab-pages-ssl /etc/nginx/sites-available/gitlab-pages-ssl.conf
sudo ln -sf /etc/nginx/sites-{available,enabled}/gitlab-pages-ssl.conf
```
Replace `gitlab-pages-ssl` with `gitlab-pages` if you are not using SSL.
1. Restart NGINX
1. [Restart GitLab][restart]
## Advanced configuration
In addition to the wildcard domains, you can also have the option to configure
GitLab Pages to work with custom domains. Again, there are two options here:
support custom domains with and without TLS certificates. The easiest setup is
that without TLS certificates.
### Custom domains
>**Requirements:**
- [Wildcard DNS setup](#dns-configuration)
- Secondary IP
>
---
>
URL scheme: `http://page.example.io` and `http://domain.com`
In that case, the pages daemon is running, Nginx still proxies requests to
the daemon but the daemon is also able to receive requests from the outside
world. Custom domains are supported, but no TLS.
1. Install the Pages daemon:
```
cd /home/git
sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-pages.git
cd gitlab-pages
sudo -u git -H git checkout v0.2.4
sudo -u git -H make
```
1. Edit `gitlab.yml` to look like the example below. You need to change the
`host` to the FQDN under which GitLab Pages will be served. Set
`external_http` to the secondary IP on which the pages daemon will listen
for connections:
```yaml
pages:
enabled: true
# The location where pages are stored (default: shared/pages).
# path: shared/pages
host: example.io
port: 80
https: false
external_http: 1.1.1.2:80
```
1. Edit `/etc/default/gitlab` and set `gitlab_pages_enabled` to `true` in
order to enable the pages daemon. In `gitlab_pages_options` the
`-pages-domain` and `-listen-http` must match the `host` and `external_http`
settings that you set above respectively:
```
gitlab_pages_enabled=true
gitlab_pages_options="-pages-domain example.io -pages-root $app_root/shared/pages -listen-proxy 127.0.0.1:8090 -listen-http 1.1.1.2:80"
```
1. Copy the `gitlab-pages-ssl` Nginx configuration file:
```bash
sudo cp lib/support/nginx/gitlab-pages-ssl /etc/nginx/sites-available/gitlab-pages-ssl.conf
sudo ln -sf /etc/nginx/sites-{available,enabled}/gitlab-pages-ssl.conf
```
Replace `gitlab-pages-ssl` with `gitlab-pages` if you are not using SSL.
1. Edit all GitLab related configs in `/etc/nginx/site-available/` and replace
`0.0.0.0` with `1.1.1.1`, where `1.1.1.1` the primary IP where GitLab
listens to.
1. Restart NGINX
1. [Restart GitLab][restart]
### Custom domains with TLS support
>**Requirements:**
- [Wildcard DNS setup](#dns-configuration)
- Wildcard TLS certificate
- Secondary IP
>
---
>
URL scheme: `https://page.example.io` and `https://domain.com`
In that case, the pages daemon is running, Nginx still proxies requests to
the daemon but the daemon is also able to receive requests from the outside
world. Custom domains and TLS are supported.
1. Install the Pages daemon:
```
cd /home/git
sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-pages.git
cd gitlab-pages
sudo -u git -H git checkout v0.2.4
sudo -u git -H make
```
1. Edit `gitlab.yml` to look like the example below. You need to change the
`host` to the FQDN under which GitLab Pages will be served. Set
`external_http` and `external_https` to the secondary IP on which the pages
daemon will listen for connections:
```yaml
## GitLab Pages
pages:
enabled: true
# The location where pages are stored (default: shared/pages).
# path: shared/pages
host: example.io
port: 443
https: true
external_http: 1.1.1.2:80
external_https: 1.1.1.2:443
```
1. Edit `/etc/default/gitlab` and set `gitlab_pages_enabled` to `true` in
order to enable the pages daemon. In `gitlab_pages_options` the
`-pages-domain`, `-listen-http` and `-listen-https` must match the `host`,
`external_http` and `external_https` settings that you set above respectively.
The `-root-cert` and `-root-key` settings are the wildcard TLS certificates
of the `example.io` domain:
```
gitlab_pages_enabled=true
gitlab_pages_options="-pages-domain example.io -pages-root $app_root/shared/pages -listen-proxy 127.0.0.1:8090 -listen-http 1.1.1.2:80 -listen-https 1.1.1.2:443 -root-cert /path/to/example.io.crt -root-key /path/to/example.io.key
```
1. Copy the `gitlab-pages-ssl` Nginx configuration file:
```bash
sudo cp lib/support/nginx/gitlab-pages-ssl /etc/nginx/sites-available/gitlab-pages-ssl.conf
sudo ln -sf /etc/nginx/sites-{available,enabled}/gitlab-pages-ssl.conf
```
Replace `gitlab-pages-ssl` with `gitlab-pages` if you are not using SSL.
1. Edit all GitLab related configs in `/etc/nginx/site-available/` and replace
`0.0.0.0` with `1.1.1.1`, where `1.1.1.1` the primary IP where GitLab
listens to.
1. Restart NGINX
1. [Restart GitLab][restart]
## Change storage path
Follow the steps below to change the default path where GitLab Pages' contents
are stored.
1. Pages are stored by default in `/var/opt/gitlab/gitlab-rails/shared/pages`.
If you wish to store them in another location you must set it up in
`/etc/gitlab/gitlab.rb`:
```ruby
gitlab_rails['pages_path'] = "/mnt/storage/pages"
```
1. [Reconfigure GitLab][reconfigure]
## NGINX caveats
>**Note:**
The following information applies only for installations from source.
Be extra careful when setting up the domain name in the NGINX config. You must
not remove the backslashes.
If your GitLab pages domain is `example.io`, replace:
```bash
server_name ~^.*\.YOUR_GITLAB_PAGES\.DOMAIN$;
```
with:
```
server_name ~^.*\.example\.io$;
```
If you are using a subdomain, make sure to escape all dots (`.`) except from
the first one with a backslash (\). For example `pages.example.io` would be:
```
server_name ~^.*\.pages\.example\.io$;
```
## Change storage path
Follow the steps below to change the default path where GitLab Pages' contents
are stored.
1. Pages are stored by default in `/home/git/gitlab/shared/pages`.
If you wish to store them in another location you must set it up in
`gitlab.yml` under the `pages` section:
```yaml
pages:
enabled: true
# The location where pages are stored (default: shared/pages).
path: /mnt/storage/pages
```
1. [Restart GitLab][restart]
## Set maximum Pages size
The maximum size of the unpacked archive per project can be configured in the
Admin area under the Application settings in the **Maximum size of pages (MB)**.
The default is 100MB.
## Backup
Pages are part of the [regular backup][backup] so there is nothing to configure.
## Security
You should strongly consider running GitLab pages under a different hostname
than GitLab to prevent XSS attacks.
[backup]: ../../raketasks/backup_restore.md
[ee-80]: https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/80
[ee-173]: https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/173
[gitlab pages daemon]: https://gitlab.com/gitlab-org/gitlab-pages
[NGINX configs]: https://gitlab.com/gitlab-org/gitlab-ee/tree/8-5-stable-ee/lib/support/nginx
[pages-readme]: https://gitlab.com/gitlab-org/gitlab-pages/blob/master/README.md
[pages-userguide]: ../../user/project/pages/index.md
[reconfigure]: ../restart_gitlab.md#omnibus-gitlab-reconfigure
[restart]: ../restart_gitlab.md#installations-from-source
[gitlab-pages]: https://gitlab.com/gitlab-org/gitlab-pages/tree/v0.2.4