gitlab-org--gitlab-foss/doc/ci/yaml/README.md

# Configuration of your builds with .gitlab-ci.yml
From version 7.12, GitLab CI uses a [YAML](https://en.wikipedia.org/wiki/YAML) file (**.gitlab-ci.yml**) for the project configuration.
It is placed in the root of your repository and contains definitions of how your project should be built.

The YAML file defines a set of jobs with constraints stating when they should be run.
The jobs are defined as top-level elements with a name and always have to contain the `script` clause:

```yaml
job1:
  script: "execute-script-for-job1"

job2:
  script: "execute-script-for-job2"
```

The above example is the simplest possible CI configuration with two separate jobs,
where each of the jobs executes a different command.
Of course a command can execute code directly (`./configure;make;make install`) or run a script (`test.sh`) in the repository.

Jobs are used to create builds, which are then picked up by [runners](../runners/README.md) and executed within the environment of the runner.
What is important, is that each job is run independently from each other.

## .gitlab-ci.yml
The YAML syntax allows for using more complex job specifications than in the above example:

```yaml
image: ruby:2.1
services:
  - postgres

before_script:
  - bundle_install

stages:
  - build
  - test
  - deploy

job1:
  stage: build
  script:
    - execute-script-for-job1
  only:
    - master
  tags:
    - docker
```

There are a few `keywords` that can't be used as job names:

| keyword       | required | description |
|---------------|----------|-------------|
| image         | optional | Use docker image, covered in [Use Docker](../docker/README.md) |
| services      | optional | Use docker services, covered in [Use Docker](../docker/README.md) |
| stages        | optional | Define build stages |
| types         | optional | Alias for `stages` |
| before_script | optional | Define commands prepended for each job's script |
| variables     | optional | Define build variables |
| cache         | optional | Define list of files that should be cached between subsequent runs |

### image and services
This allows to specify a custom Docker image and a list of services that can be used for time of the build.
The configuration of this feature is covered in separate document: [Use Docker](../docker/README.md).

### before_script
`before_script` is used to define the command that should be run before all builds, including deploy builds. This can be an array or a multiline string.

### stages
`stages` is used to define build stages that can be used by jobs.
The specification of `stages` allows for having flexible multi stage pipelines.

The ordering of elements in `stages` defines the ordering of builds' execution:

1. Builds of the same stage are run in parallel.
1. Builds of next stage are run after success.

Let's consider the following example, which defines 3 stages:
```
stages:
  - build
  - test
  - deploy
```

1. First all jobs of `build` are executed in parallel.
1. If all jobs of `build` succeeds, the `test` jobs are executed in parallel.
1. If all jobs of `test` succeeds, the `deploy` jobs are executed in parallel.
1. If all jobs of `deploy` succeeds, the commit is marked as `success`.
1. If any of the previous jobs fails, the commit is marked as `failed` and no jobs of further stage are executed.

There are also two edge cases worth mentioning:

1. If no `stages` is defined in `.gitlab-ci.yml`, then by default the `build`, `test` and `deploy` are allowed to be used as job's stage by default.
2. If a job doesn't specify `stage`, the job is assigned the `test` stage.

### types
Alias for [stages](#stages).

### variables
**This feature requires `gitlab-runner` with version equal or greater than 0.5.0.**

GitLab CI allows you to add to `.gitlab-ci.yml` variables that are set in build environment.
The variables are stored in repository and are meant to store non-sensitive project configuration, ie. RAILS_ENV or DATABASE_URL.

```yaml
variables:
  DATABASE_URL: "postgres://postgres@postgres/my_database"
```

These variables can be later used in all executed commands and scripts.

The YAML-defined variables are also set to all created service containers, thus allowing to fine tune them.

### cache
`cache` is used to specify list of files and directories which should be cached between builds.
Caches are stored according to the branch/ref and the job name. Caches are not
currently shared between different job names or between branches/refs. This means
caching will benefit you if you push subsequent commits to an existing feature branch.

**The global setting allows to specify default cached files for all jobs.**

To cache all git untracked files and files in `binaries`:
```
cache:
  untracked: true
  paths:
  - binaries/
```

## Jobs
`.gitlab-ci.yml` allows you to specify an unlimited number of jobs.
Each job has to have a unique `job_name`, which is not one of the keywords mentioned above.
A job is defined by a list of parameters that define the build behaviour.

```yaml
job_name:
  script:
    - rake spec
    - coverage
  stage: test
  only:
    - master
  except:
    - develop
  tags:
    - ruby
    - postgres
  allow_failure: true
```

| keyword       | required | description |
|---------------|----------|-------------|
| script        | required | Defines a shell script which is executed by runner |
| stage         | optional (default: test) | Defines a build stage |
| type          | optional | Alias for `stage` |
| only          | optional | Defines a list of git refs for which build is created |
| except        | optional | Defines a list of git refs for which build is not created |
| tags          | optional | Defines a list of tags which are used to select runner |
| allow_failure | optional | Allow build to fail. Failed build doesn't contribute to commit status |
| when          | optional | Define when to run build. Can be `on_success`, `on_failure` or `always` |
| artifacts     | optional | Define list build artifacts |
| cache         | optional | Define list of files that should be cached between subsequent runs |

### script
`script` is a shell script which is executed by runner. The shell script is prepended with `before_script`.

```yaml
job:
  script: "bundle exec rspec"
```

This parameter can also contain several commands using an array:
```yaml
job:
  script:
    - uname -a
    - bundle exec rspec
```

### stage
`stage` allows to group build into different stages. Builds of the same `stage` are executed in `parallel`.
For more info about the use of `stage` please check the [stages](#stages).

### only and except
This are two parameters that allow for setting a refs policy to limit when jobs are built:
1. `only` defines the names of branches and tags for which job will be built.
2. `except` defines the names of branches and tags for which the job wil **not** be built.

There are a few rules that apply to usage of refs policy:

1. `only` and `except` are inclusive. If both `only` and `except` are defined in job specification the ref is filtered by `only` and `except`.
1. `only` and `except` allow for using the regexp expressions.
1. `only` and `except` allow for using special keywords: `branches` and `tags`.
These names can be used for example to exclude all tags and all branches.

```yaml
job:
  only:
    - /^issue-.*$/ # use regexp
  except:
    - branches # use special keyword
```

1. `only` and `except` allow for specify repository path to filter jobs for forks.
The repository path can be used to have jobs executed only for parent repository.

```yaml
job:
  only:
    - branches@gitlab-org/gitlab-ce
  except:
    - master@gitlab-org/gitlab-ce
```
The above will run `job` for all branches on `gitlab-org/gitlab-ce`, except master .

### tags
`tags` is used to select specific runners from the list of all runners that are allowed to run this project.

During registration of a runner, you can specify the runner's tags, ie.: `ruby`, `postgres`, `development`.
`tags` allow you to run builds with runners that have the specified tags assigned:

```
job:
  tags:
    - ruby
    - postgres
```

The above specification will make sure that `job` is built by a runner that have `ruby` AND `postgres` tags defined.

### when
`when` is used to implement jobs that are run in case of failure or despite the failure.

`when` can be set to one of the following values:

1. `on_success` - execute build only when all builds from prior stages succeeded. This is the default.
1. `on_failure` - execute build only when at least one build from prior stages failed.
1. `always` - execute build despite the status of builds from prior stages.

```
stages:
- build
- cleanup_build
- test
- deploy
- cleanup

build:
  stage: build
  script:
  - make build

cleanup_build:
  stage: cleanup_build
  script:
  - cleanup build when failed
  when: on_failure

test:
  stage: test
  script:
  - make test

deploy:
  stage: deploy
  script:
  - make deploy

cleanup:
  stage: cleanup
  script:
  - cleanup after builds
  when: always
```

The above script will:
1. Execute `cleanup_build` only when the `build` failed,
2. Always execute `cleanup` as the last step in pipeline.

### artifacts
`artifacts` is used to specify list of files and directories which should be attached to build after success.

1. Send all files in `binaries` and `.config`:

        artifacts:
          paths:
          - binaries/
          - .config

2. Send all git untracked files:

        artifacts:
          untracked: true

3. Send all git untracked files and files in `binaries`:

        artifacts:
          untracked: true
          paths:
          - binaries/

The artifacts will be send after the build success to GitLab and will be accessible in GitLab interface to download.

This feature requires GitLab Runner v0.7.0 or higher.

### cache
`cache` is used to specify list of files and directories which should be cached between builds.

1. Cache all files in `binaries` and `.config`:

        rspec:
          script: test
          cache:
            paths:
            - binaries/
            - .config

2. Cache all git untracked files:

        rspec:
          script: test
          cache:
            untracked: true
            
3. Cache all git untracked files and files in `binaries`:

        rspec:
          script: test
          cache:
            untracked: true
            paths:
            - binaries/

4. Locally defined cache overwrites globally defined options. This will cache only `binaries/`:

        cache:
          paths:
          - my/files
        
        rspec:
          script: test
          cache:
            paths:
            - binaries/

The cache is provided on best effort basis, so don't expect that cache will be present.
For implementation details please check GitLab Runner.

This feature requires GitLab Runner v0.7.0 or higher.


## Validate the .gitlab-ci.yml
Each instance of GitLab CI has an embedded debug tool called Lint.
You can find the link to the Lint in the project's settings page or use short url `/lint`.

## Skipping builds
There is one more way to skip all builds, if your commit message contains tag [ci skip]. In this case, commit will be created but builds will be skipped