2020-05-12 03:09:31 +00:00
---
stage: Configure
group: Configure
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#designated-technical-writers
---
2019-05-27 03:59:59 +00:00
# GitLab Managed Apps
GitLab provides **GitLab Managed Apps** , a one-click install for various applications which can
2019-08-06 11:27:50 +00:00
be added directly to your configured cluster.
These applications are needed for [Review Apps ](../../ci/review_apps/index.md )
2020-05-15 18:07:52 +00:00
and [deployments ](../../ci/environments/index.md ) when using [Auto DevOps ](../../topics/autodevops/index.md ).
2019-08-06 11:27:50 +00:00
2019-05-27 03:59:59 +00:00
You can install them after you
2019-10-29 03:06:28 +00:00
[create a cluster ](../project/clusters/add_remove_clusters.md ).
2019-05-27 03:59:59 +00:00
## Installing applications
Applications managed by GitLab will be installed onto the `gitlab-managed-apps` namespace.
2019-07-25 14:12:45 +00:00
2019-05-27 03:59:59 +00:00
This namespace:
- Is different from the namespace used for project deployments.
- Is created once.
- Has a non-configurable name.
2019-09-09 14:24:33 +00:00
To see a list of available applications to install. For a:
2019-05-27 03:59:59 +00:00
2019-09-09 14:24:33 +00:00
- [Project-level cluster ](../project/clusters/index.md ), navigate to your project's
2020-02-28 09:09:01 +00:00
** {cloud-gear}** **Operations > Kubernetes** .
- [Group-level cluster ](../group/clusters/index.md ), navigate to your group's
** {cloud-gear}** **Kubernetes** page.
2019-05-27 03:59:59 +00:00
NOTE: **Note:**
As of GitLab 11.6, Helm will be upgraded to the latest version supported
by GitLab before installing any of the applications.
The following applications can be installed:
- [Helm ](#helm )
- [Ingress ](#ingress )
2020-01-10 09:07:49 +00:00
- [cert-manager ](#cert-manager )
2019-05-27 03:59:59 +00:00
- [Prometheus ](#prometheus )
- [GitLab Runner ](#gitlab-runner )
- [JupyterHub ](#jupyterhub )
- [Knative ](#knative )
2019-11-16 03:06:13 +00:00
- [Crossplane ](#crossplane )
2020-01-14 00:08:14 +00:00
- [Elastic Stack ](#elastic-stack )
2020-04-14 21:09:52 +00:00
- [Fluentd ](#fluentd )
2019-05-27 03:59:59 +00:00
With the exception of Knative, the applications will be installed in a dedicated
namespace called `gitlab-managed-apps` .
NOTE: **Note:**
Some applications are installable only for a project-level cluster.
Support for installing these applications in a group-level cluster is
planned for future releases.
For updates, see [the issue tracking
2020-04-07 03:09:15 +00:00
progress](https://gitlab.com/gitlab-org/gitlab/-/issues/24411).
2019-05-27 03:59:59 +00:00
CAUTION: **Caution:**
If you have an existing Kubernetes cluster with Helm already installed,
you should be careful as GitLab cannot detect it. In this case, installing
Helm via the applications will result in the cluster having it twice, which
can lead to confusion during deployments.
### Helm
2019-09-09 14:24:33 +00:00
> - Introduced in GitLab 10.2 for project-level clusters.
> - Introduced in GitLab 11.6 for group-level clusters.
2020-07-08 00:09:06 +00:00
> - A local Tiller option was [introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/209736) in GitLab 13.2 behind a feature flag, enabled by default.
2020-06-26 06:09:03 +00:00
> - The feature flag for local Tiller is enabled on GitLab.com.
2019-05-27 03:59:59 +00:00
2019-10-10 00:06:44 +00:00
[Helm ](https://helm.sh/docs/ ) is a package manager for Kubernetes and is
2020-07-08 00:09:06 +00:00
used to install the GitLab-managed apps. GitLab runs each `helm` command
in a pod within the `gitlab-managed-apps` namespace inside the cluster.
2019-05-27 03:59:59 +00:00
2020-07-08 00:09:06 +00:00
As of GitLab 13.2, the integration uses a local
[Tiller ](https://v2.helm.sh/docs/glossary/#tiller ) by default. When using a
local Tiller, the Helm application does not need to be installed and will not
be shown in the list of applications.
2020-06-26 06:09:03 +00:00
2019-09-17 03:06:07 +00:00
NOTE: **Note:**
2020-07-08 00:09:06 +00:00
GitLab's Helm integration does not support installing applications behind a proxy,
but a [workaround ](../../topics/autodevops/index.md#install-applications-behind-a-proxy )
2019-09-17 03:06:07 +00:00
is available.
2020-06-26 06:09:03 +00:00
### Enable or disable local Tiller **(CORE ONLY)**
2020-07-08 00:09:06 +00:00
> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/209736) in GitLab 13.2
> - The option to disable local Tiller is [planned for removal](https://gitlab.com/gitlab-org/gitlab/-/issues/209736) in GitLab 13.3
2020-06-26 06:09:03 +00:00
Local Tiller is under development, but is ready for production use. It is
2020-07-08 00:09:06 +00:00
deployed behind a feature flag that is **enabled by default** .
2020-06-26 06:09:03 +00:00
[GitLab administrators with access to the GitLab Rails console ](../../administration/feature_flags.md )
can enable it for your instance.
To enable it:
```ruby
# Instance-wide
Feature.enable(:managed_apps_local_tiller)
```
To disable it:
```ruby
# Instance-wide
Feature.disable(:managed_apps_local_tiller)
```
2020-01-10 09:07:49 +00:00
### cert-manager
2019-05-27 03:59:59 +00:00
2019-09-09 14:24:33 +00:00
> Introduced in GitLab 11.6 for project- and group-level clusters.
2019-05-27 03:59:59 +00:00
2020-03-31 06:07:50 +00:00
[cert-manager ](https://cert-manager.io/docs/ ) is a native
2019-05-27 03:59:59 +00:00
Kubernetes certificate management controller that helps with issuing
2020-01-10 09:07:49 +00:00
certificates. Installing cert-manager on your cluster will issue a
2019-05-27 03:59:59 +00:00
certificate by [Let's Encrypt ](https://letsencrypt.org/ ) and ensure that
certificates are valid and up-to-date.
2019-10-24 00:07:18 +00:00
The chart used to install this application depends on the version of GitLab used. In:
2019-05-27 03:59:59 +00:00
2019-10-24 00:07:18 +00:00
- GitLab 12.3 and newer, the [jetstack/cert-manager ](https://github.com/jetstack/cert-manager )
chart is used with a [`values.yaml` ](https://gitlab.com/gitlab-org/gitlab/blob/master/vendor/cert_manager/values.yaml )
file.
- GitLab 12.2 and older, the [stable/cert-manager ](https://github.com/helm/charts/tree/master/stable/cert-manager )
chart was used.
2020-01-10 09:07:49 +00:00
If you have installed cert-manager prior to GitLab 12.3, Let's Encrypt will
[block requests from older versions of cert-manager ](https://community.letsencrypt.org/t/blocking-old-cert-manager-versions/98753 ).
2019-10-24 00:07:18 +00:00
To resolve this:
2020-03-31 06:07:50 +00:00
1. Uninstall cert-manager (consider [backing up any additional configuration ](https://cert-manager.io/docs/tutorials/backup/ )).
2020-01-10 09:07:49 +00:00
1. Install cert-manager again.
2019-10-14 06:06:06 +00:00
2019-05-27 03:59:59 +00:00
### GitLab Runner
2019-09-09 14:24:33 +00:00
> - Introduced in GitLab 10.6 for project-level clusters.
> - Introduced in GitLab 11.10 for group-level clusters.
2019-05-27 03:59:59 +00:00
[GitLab Runner ](https://docs.gitlab.com/runner/ ) is the open source
project that is used to run your jobs and send the results back to
GitLab. It is used in conjunction with [GitLab
CI/CD](../../ci/README.md), the open-source continuous integration
2019-10-31 15:06:41 +00:00
service included with GitLab that coordinates the jobs.
If the project is on GitLab.com, shared Runners are available
(the first 2000 minutes are free, you can
2020-02-26 09:08:47 +00:00
[buy more later ](../../subscriptions/index.md#purchasing-additional-ci-minutes ))
2019-10-31 15:06:41 +00:00
and you do not have to deploy one if they are enough for your needs. If a
project-specific Runner is desired, or there are no shared Runners, it is easy
to deploy one.
Note that the deployed Runner will be set as **privileged** , which means it will essentially
have root access to the underlying machine. This is required to build Docker images,
so it is the default. Make sure you read the
[security implications ](../project/clusters/index.md#security-implications )
before deploying one.
2019-05-27 03:59:59 +00:00
NOTE: **Note:**
2019-10-02 12:06:04 +00:00
The [`runner/gitlab-runner` ](https://gitlab.com/gitlab-org/charts/gitlab-runner )
2020-04-24 09:09:44 +00:00
chart is used to install this application, using
[a preconfigured `values.yaml` ](https://gitlab.com/gitlab-org/charts/gitlab-runner/-/blob/master/values.yaml )
file. Customizing the installation by modifying this file is not supported.
2019-05-27 03:59:59 +00:00
### Ingress
2019-09-09 14:24:33 +00:00
> - Introduced in GitLab 10.2 for project-level clusters.
> - Introduced in GitLab 11.6 for group-level clusters.
2019-05-27 03:59:59 +00:00
2020-02-07 21:08:39 +00:00
[Ingress ](https://kubernetes.io/docs/concepts/services-networking/ingress/ ) provides load balancing, SSL termination, and name-based virtual hosting
out of the box. It acts as a web proxy for your applications and is useful
if you want to use [Auto DevOps ](../../topics/autodevops/index.md ) or deploy your own web apps.
The Ingress Controller installed is [Ingress-NGINX ](https://kubernetes.io/docs/concepts/services-networking/ingress/ ),
which is supported by the Kubernetes community.
2019-05-27 03:59:59 +00:00
2019-10-31 15:06:41 +00:00
NOTE: **Note:**
With the following procedure, a load balancer must be installed in your cluster
to obtain the endpoint. You can use either
Ingress, or Knative's own load balancer ([Istio](https://istio.io)) if using Knative.
In order to publish your web application, you first need to find the endpoint which will be either an IP
address or a hostname associated with your load balancer.
To install it, click on the **Install** button for Ingress. GitLab will attempt
to determine the external endpoint and it should be available within a few minutes.
#### Determining the external endpoint automatically
2020-02-06 15:09:11 +00:00
> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/17052) in GitLab 10.6.
2019-10-31 15:06:41 +00:00
After you install Ingress, the external endpoint should be available within a few minutes.
TIP: **Tip:**
This endpoint can be used for the
[Auto DevOps base domain ](../../topics/autodevops/index.md#auto-devops-base-domain )
using the `KUBE_INGRESS_BASE_DOMAIN` environment variable.
If the endpoint doesn't appear and your cluster runs on Google Kubernetes Engine:
1. Check your [Kubernetes cluster on Google Kubernetes Engine ](https://console.cloud.google.com/kubernetes ) to ensure there are no errors on its nodes.
1. Ensure you have enough [Quotas ](https://console.cloud.google.com/iam-admin/quotas ) on Google Kubernetes Engine. For more information, see [Resource Quotas ](https://cloud.google.com/compute/quotas ).
1. Check [Google Cloud's Status ](https://status.cloud.google.com/ ) to ensure they are not having any disruptions.
Once installed, you may see a `?` for "Ingress IP Address" depending on the
cloud provider. For EKS specifically, this is because the ELB is created
with a DNS name, not an IP address. If GitLab is still unable to
determine the endpoint of your Ingress or Knative application, you can
[determine it manually ](#determining-the-external-endpoint-manually ).
2019-05-27 03:59:59 +00:00
NOTE: **Note:**
2019-10-02 12:06:04 +00:00
The [`stable/nginx-ingress` ](https://github.com/helm/charts/tree/master/stable/nginx-ingress )
2019-05-27 03:59:59 +00:00
chart is used to install this application with a
2019-09-18 18:06:14 +00:00
[`values.yaml` ](https://gitlab.com/gitlab-org/gitlab/blob/master/vendor/ingress/values.yaml )
2019-05-27 03:59:59 +00:00
file.
2019-10-31 15:06:41 +00:00
#### Determining the external endpoint manually
If the cluster is on GKE, click the **Google Kubernetes Engine** link in the
**Advanced settings**, or go directly to the
[Google Kubernetes Engine dashboard ](https://console.cloud.google.com/kubernetes/ )
and select the proper project and cluster. Then click **Connect** and execute
the `gcloud` command in a local terminal or using the **Cloud Shell** .
If the cluster is not on GKE, follow the specific instructions for your
Kubernetes provider to configure `kubectl` with the right credentials.
The output of the following examples will show the external endpoint of your
cluster. This information can then be used to set up DNS entries and forwarding
rules that allow external access to your deployed applications.
If you installed Ingress via the **Applications** , run the following command:
2020-01-30 15:09:15 +00:00
```shell
2019-10-31 15:06:41 +00:00
kubectl get service --namespace=gitlab-managed-apps ingress-nginx-ingress-controller -o jsonpath='{.status.loadBalancer.ingress[0].ip}'
```
Some Kubernetes clusters return a hostname instead, like [Amazon EKS ](https://aws.amazon.com/eks/ ). For these platforms, run:
2020-01-30 15:09:15 +00:00
```shell
2019-10-31 15:06:41 +00:00
kubectl get service --namespace=gitlab-managed-apps ingress-nginx-ingress-controller -o jsonpath='{.status.loadBalancer.ingress[0].hostname}'
```
For Istio/Knative, the command will be different:
2020-01-30 15:09:15 +00:00
```shell
2020-03-23 03:09:21 +00:00
kubectl get svc --namespace=istio-system istio-ingressgateway -o jsonpath='{.status.loadBalancer.ingress[0].ip} '
2019-10-31 15:06:41 +00:00
```
Otherwise, you can list the IP addresses of all load balancers:
2020-01-30 15:09:15 +00:00
```shell
2019-10-31 15:06:41 +00:00
kubectl get svc --all-namespaces -o jsonpath='{range.items[?(@.status.loadBalancer.ingress)]}{.status.loadBalancer.ingress[*].ip} '
```
NOTE: **Note:**
If EKS is used, an [Elastic Load Balancer ](https://docs.aws.amazon.com/elasticloadbalancing/ )
will also be created, which will incur additional AWS costs.
NOTE: **Note:**
You may see a trailing `%` on some Kubernetes versions, **do not include it** .
The Ingress is now available at this address and will route incoming requests to
the proper service based on the DNS name in the request. To support this, a
wildcard DNS CNAME record should be created for the desired domain name. For example,
`*.myekscluster.com` would point to the Ingress hostname obtained earlier.
#### Using a static IP
By default, an ephemeral external IP address is associated to the cluster's load
balancer. If you associate the ephemeral IP with your DNS and the IP changes,
your apps will not be able to be reached, and you'd have to change the DNS
record again. In order to avoid that, you should change it into a static
reserved IP.
Read how to [promote an ephemeral external IP address in GKE ](https://cloud.google.com/compute/docs/ip-addresses/reserve-static-external-ip-address#promote_ephemeral_ip ).
#### Pointing your DNS at the external endpoint
Once you've set up the external endpoint, you should associate it with a [wildcard DNS
record](https://en.wikipedia.org/wiki/Wildcard_DNS_record) such as `*.example.com.`
in order to be able to reach your apps. If your external endpoint is an IP address,
use an A record. If your external endpoint is a hostname, use a CNAME record.
2019-10-14 18:06:24 +00:00
#### Web Application Firewall (ModSecurity)
2019-09-18 14:02:45 +00:00
2020-02-06 15:09:11 +00:00
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/21966) in GitLab 12.7.
2019-09-18 14:02:45 +00:00
2020-02-26 18:09:24 +00:00
A Web Application Firewall (WAF) examines traffic being sent or received,
2020-02-07 21:08:39 +00:00
and can block malicious traffic before it reaches your application. The benefits
of a WAF are:
- Real-time security monitoring for your application
- Logging of all your HTTP traffic to the application
- Access control for your application
- Highly configurable logging and blocking rules
2020-02-26 18:09:24 +00:00
Out of the box, GitLab provides you with a WAF known as [`ModSecurity` ](https://www.modsecurity.org/ ).
2019-10-14 18:06:24 +00:00
2020-02-07 21:08:39 +00:00
ModSecurity is a toolkit for real-time web application monitoring, logging,
and access control. With GitLab's offering, the [OWASP's Core Rule Set ](https://www.modsecurity.org/CRS/Documentation/ ),
which provides generic attack detection capabilities, is automatically applied.
2019-10-14 18:06:24 +00:00
2019-09-18 14:02:45 +00:00
This feature:
- Runs in "Detection-only mode" unless configured otherwise.
2019-10-02 12:06:04 +00:00
- Is viewable by checking your Ingress controller's `modsec` log for rule violations.
2019-09-18 14:02:45 +00:00
For example:
2020-01-30 15:09:15 +00:00
```shell
2020-07-22 18:09:27 +00:00
kubectl -n gitlab-managed-apps logs -l app=nginx-ingress,component=controller -c modsecurity-log -f
2019-09-18 14:02:45 +00:00
```
2020-03-13 18:09:39 +00:00
To enable WAF, switch its respective toggle to the enabled position when installing or updating [Ingress application ](#ingress ).
2019-12-09 03:07:57 +00:00
2020-02-07 21:08:39 +00:00
If this is your first time using GitLab's WAF, we recommend you follow the
[quick start guide ](../../topics/web_application_firewall/quick_start_guide.md ).
2020-01-07 12:07:55 +00:00
There is a small performance overhead by enabling ModSecurity. If this is
considered significant for your application, you can disable ModSecurity's
2020-03-13 18:09:39 +00:00
rule engine for your deployed application in any of the following ways:
1. Setting [the deployment variable ](../../topics/autodevops/index.md )
2020-01-07 12:07:55 +00:00
`AUTO_DEVOPS_MODSECURITY_SEC_RULE_ENGINE` to `Off` . This will prevent ModSecurity
from processing any requests for the given application or environment.
2019-12-09 03:07:57 +00:00
2020-03-13 18:09:39 +00:00
1. Switching its respective toggle to the disabled position and applying changes through the **Save changes** button. This will reinstall
Ingress with the recent changes.
2020-04-08 18:09:16 +00:00
![Disabling WAF ](../../topics/web_application_firewall/img/guide_waf_ingress_save_changes_v12_10.png )
2019-09-18 14:02:45 +00:00
2020-04-15 00:09:27 +00:00
##### Logging and blocking modes
To help you tune your WAF rules, you can globally set your WAF to either
**Logging** or **Blocking** mode:
- **Logging mode** - Allows traffic matching the rule to pass, and logs the event.
- **Blocking mode** - Prevents traffic matching the rule from passing, and logs the event.
To change your WAF's mode:
1. [Install ModSecurity ](../../topics/web_application_firewall/quick_start_guide.md ) if you have not already done so.
1. Navigate to ** {cloud-gear}** **Operations > Kubernetes** .
1. In **Applications** , scroll to **Ingress** .
1. Under **Global default** , select your desired mode.
1. Click **Save changes** .
2020-04-24 00:09:28 +00:00
##### WAF version updates
Enabling, disabling, or changing the logging mode for **ModSecurity** is only allowed within same version of [Ingress ](#ingress ) due to limitations in [Helm ](https://helm.sh/ ) which might be overcome in future releases.
**ModSecurity** UI controls are disabled if the version deployed differs from the one available in GitLab, while actions at the [Ingress ](#ingress ) level, such as uninstalling, can still be performed:
![WAF settings disabled ](../../topics/web_application_firewall/img/guide_waf_ingress_disabled_settings_v12_10.png )
Updating [Ingress ](#ingress ) to the most recent version enables you to take advantage of bug fixes, security fixes, and performance improvements. To update [Ingress application ](#ingress ), you must first uninstall it, and then re-install it as described in [Install ModSecurity ](../../topics/web_application_firewall/quick_start_guide.md ).
2020-03-16 21:09:21 +00:00
##### Viewing Web Application Firewall traffic
2020-05-22 03:08:28 +00:00
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/14707) in [GitLab Ultimate](https://about.gitlab.com/pricing/) 12.9.
2020-03-16 21:09:21 +00:00
You can view Web Application Firewall traffic by navigating to your project's
**Security & Compliance > Threat Monitoring** page.
From there, you can see tracked over time:
- The total amount of traffic to your application.
- The proportion of traffic that is considered anomalous by the Web Application
Firewall's default [OWASP ruleset ](https://www.modsecurity.org/CRS/Documentation/ ).
If a significant percentage of traffic is anomalous, it should be investigated
for potential threats, which can be done by
2020-04-09 21:09:19 +00:00
[examining the Web Application Firewall logs ](#web-application-firewall-modsecurity ).
2020-03-16 21:09:21 +00:00
![Threat Monitoring ](img/threat_monitoring_v12_9.png )
2019-05-27 03:59:59 +00:00
### JupyterHub
2019-09-09 14:24:33 +00:00
> - Introduced in GitLab 11.0 for project-level clusters.
2019-10-03 09:07:16 +00:00
> - Introduced in GitLab 12.3 for group and instance-level clusters.
2019-05-27 03:59:59 +00:00
[JupyterHub ](https://jupyterhub.readthedocs.io/en/stable/ ) is a
multi-user service for managing notebooks across a team. [Jupyter
Notebooks](https://jupyter-notebook.readthedocs.io/en/latest/) provide a
web-based interactive programming environment used for data analysis,
visualization, and machine learning.
Authentication will be enabled only for [project
2019-09-05 20:41:55 +00:00
members](../project/members/index.md) for project-level clusters and group
members for group-level clusters with [Developer or
higher](../permissions.md) access to the associated project or group.
2019-05-27 03:59:59 +00:00
We use a [custom Jupyter
image](https://gitlab.com/gitlab-org/jupyterhub-user-image/blob/master/Dockerfile)
that installs additional useful packages on top of the base Jupyter. You
2019-10-10 00:06:44 +00:00
will also see ready-to-use DevOps Runbooks built with Nurtch's [Rubix library ](https://github.com/Nurtch/rubix ).
2019-05-27 03:59:59 +00:00
More information on
2019-06-06 02:55:28 +00:00
creating executable runbooks can be found in [our Runbooks
2020-05-04 21:09:41 +00:00
documentation](../project/clusters/runbooks/index.md#configure-an-executable-runbook-with-gitlab). Note that
2019-05-27 03:59:59 +00:00
Ingress must be installed and have an IP address assigned before
JupyterHub can be installed.
NOTE: **Note:**
2019-10-02 12:06:04 +00:00
The [`jupyter/jupyterhub` ](https://jupyterhub.github.io/helm-chart/ )
2019-05-27 03:59:59 +00:00
chart is used to install this application with a
2019-09-18 18:06:14 +00:00
[`values.yaml` ](https://gitlab.com/gitlab-org/gitlab/blob/master/vendor/jupyter/values.yaml )
2019-05-27 03:59:59 +00:00
file.
2019-06-06 02:55:28 +00:00
#### Jupyter Git Integration
2020-03-24 03:09:28 +00:00
> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/28783) in GitLab 12.0 for project-level clusters.
> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/32512) in GitLab 12.3 for group and instance-level clusters.
2019-06-06 02:55:28 +00:00
When installing JupyterHub onto your Kubernetes cluster, [JupyterLab's Git extension ](https://github.com/jupyterlab/jupyterlab-git )
is automatically provisioned and configured using the authenticated user's:
2019-08-06 11:27:50 +00:00
- Name.
- Email.
- Newly created access token.
2019-06-06 02:55:28 +00:00
JupyterLab's Git extension enables full version control of your notebooks as well as issuance of Git commands within Jupyter.
Git commands can be issued via the **Git** tab on the left panel or via Jupyter's command line prompt.
NOTE: **Note:**
JupyterLab's Git extension stores the user token in the JupyterHub DB in encrypted format
and in the single user Jupyter instance as plain text. This is because [Git requires storing
credentials as plain text](https://git-scm.com/docs/git-credential-store). Potentially, if
a nefarious user finds a way to read from the file system in the single user Jupyter instance
they could retrieve the token.
![Jupyter's Git Extension ](img/jupyter-git-extension.gif )
You can clone repositories from the files tab in Jupyter:
![Jupyter clone repository ](img/jupyter-gitclone.png )
2019-05-27 03:59:59 +00:00
### Knative
2019-09-09 14:24:33 +00:00
> - Introduced in GitLab 11.5 for project-level clusters.
> - Introduced in GitLab 12.3 for group- and instance-level clusters.
2019-05-27 03:59:59 +00:00
2019-10-10 00:06:44 +00:00
[Knative ](https://cloud.google.com/knative/ ) provides a platform to
2019-05-27 03:59:59 +00:00
create, deploy, and manage serverless workloads from a Kubernetes
cluster. It is used in conjunction with, and includes
[Istio ](https://istio.io ) to provide an external IP address for all
programs hosted by Knative.
You will be prompted to enter a wildcard
domain where your applications will be exposed. Configure your DNS
server to use the external IP address for that domain. For any
application created and installed, they will be accessible as
`<program_name>.<kubernetes_namespace>.<domain_name>` . This will require
2019-10-02 12:06:04 +00:00
your Kubernetes cluster to have [RBAC
2019-10-29 03:06:28 +00:00
enabled](../project/clusters/add_remove_clusters.md#rbac-cluster-resources).
2019-05-27 03:59:59 +00:00
NOTE: **Note:**
2019-10-02 12:06:04 +00:00
The [`knative/knative` ](https://storage.googleapis.com/triggermesh-charts )
2019-05-27 03:59:59 +00:00
chart is used to install this application.
### Prometheus
2019-09-09 14:24:33 +00:00
> - Introduced in GitLab 10.4 for project-level clusters.
> - Introduced in GitLab 11.11 for group-level clusters.
2019-05-27 03:59:59 +00:00
[Prometheus ](https://prometheus.io/docs/introduction/overview/ ) is an
open-source monitoring and alerting system useful to supervise your
deployed applications.
2019-10-31 15:06:41 +00:00
GitLab is able to monitor applications automatically, using the
[Prometheus integration ](../project/integrations/prometheus.md ). Kubernetes container CPU and
memory metrics are automatically collected, and response metrics are retrieved
from NGINX Ingress as well.
To enable monitoring, simply install Prometheus into the cluster with the
**Install** button.
2019-05-27 03:59:59 +00:00
NOTE: **Note:**
2019-10-02 12:06:04 +00:00
The [`stable/prometheus` ](https://github.com/helm/charts/tree/master/stable/prometheus )
2019-05-27 03:59:59 +00:00
chart is used to install this application with a
2019-09-18 18:06:14 +00:00
[`values.yaml` ](https://gitlab.com/gitlab-org/gitlab/blob/master/vendor/prometheus/values.yaml )
2019-05-27 03:59:59 +00:00
file.
2019-11-16 03:06:13 +00:00
### Crossplane
2020-05-22 03:08:28 +00:00
> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/34702) in GitLab 12.5 for project-level clusters.
2019-11-16 03:06:13 +00:00
2020-04-04 09:09:16 +00:00
[Crossplane ](https://crossplane.github.io/docs/v0.9/ ) is a multi-cloud control plane useful for
2019-11-16 03:06:13 +00:00
managing applications and infrastructure across multiple clouds. It extends the
Kubernetes API using:
- Custom resources.
- Controllers that watch those custom resources.
Crossplane allows provisioning and lifecycle management of infrastructure components
across cloud providers in a uniform manner by abstracting cloud provider-specific
configurations.
The Crossplane GitLab-managed application:
- Installs Crossplane with a provider of choice on a Kubernetes cluster attached to the
project repository.
- Can then be used to provision infrastructure or managed applications such as
PostgreSQL (for example, CloudSQL from GCP or RDS from AWS) and other services
required by the application via the Auto DevOps pipeline.
For information on configuring Crossplane installed on the cluster, see
[Crossplane configuration ](crossplane.md ).
NOTE: **Note:**
2020-06-17 03:08:38 +00:00
[`alpha/crossplane` ](https://github.com/crossplane/crossplane/tree/v0.4.1/cluster/charts/crossplane ) chart v0.4.1 is used to
2019-11-16 03:06:13 +00:00
install Crossplane using the
2020-04-04 09:09:16 +00:00
[`values.yaml` ](https://github.com/crossplane/crossplane/blob/master/cluster/charts/crossplane/values.yaml.tmpl )
2019-11-16 03:06:13 +00:00
file.
2020-01-14 00:08:14 +00:00
### Elastic Stack
> Introduced in GitLab 12.7 for project- and group-level clusters.
2020-04-04 09:09:16 +00:00
[Elastic Stack ](https://www.elastic.co/elastic-stack ) is a complete end-to-end
2020-01-14 00:08:14 +00:00
log analysis solution which helps in deep searching, analyzing and visualizing the logs
generated from different machines.
GitLab is able to gather logs from pods in your cluster automatically.
Filebeat will run as a DaemonSet on each node in your cluster, and it will ship container logs to Elasticsearch for querying.
GitLab will then connect to Elasticsearch for logs instead of the Kubernetes API,
and you will have access to more advanced querying capabilities.
2020-02-07 00:09:12 +00:00
Log data is automatically deleted after 30 days using [Curator ](https://www.elastic.co/guide/en/elasticsearch/client/curator/5.5/about.html ).
2020-01-16 18:08:46 +00:00
2020-04-24 00:09:28 +00:00
To enable log shipping:
2020-05-13 00:07:50 +00:00
1. Ensure your cluster contains at least 3 nodes of instance types larger than
`f1-micro` , `g1-small` , or `n1-standard-1` .
2020-04-24 00:09:28 +00:00
1. Navigate to ** {cloud-gear}** **Operations > Kubernetes** .
1. In **Kubernetes Cluster** , select a cluster.
1. In the **Applications** section, find **Elastic Stack** and click **Install** .
2020-01-14 00:08:14 +00:00
NOTE: **Note:**
2020-05-13 00:07:50 +00:00
The [`gitlab/elastic-stack` ](https://gitlab.com/gitlab-org/charts/elastic-stack )
2020-01-14 00:08:14 +00:00
chart is used to install this application with a
[`values.yaml` ](https://gitlab.com/gitlab-org/gitlab/blob/master/vendor/elastic_stack/values.yaml )
file.
2020-01-14 15:07:55 +00:00
NOTE: **Note:**
2020-05-13 00:07:50 +00:00
The chart deploys 3 identical Elasticsearch pods which can't be colocated, and each
2020-07-27 21:09:16 +00:00
requires 1 CPU and 2 GB of RAM, making them incompatible with clusters containing
2020-05-13 00:07:50 +00:00
fewer than 3 nodes or consisting of `f1-micro` , `g1-small` , `n1-standard-1` , or
`*-highcpu-2` instance types.
2020-01-14 15:07:55 +00:00
2020-03-13 12:09:22 +00:00
NOTE: **Note:**
The Elastic Stack cluster application is intended as a log aggregation solution and is not related to our
[Advanced Global Search ](../search/advanced_global_search.md ) functionality, which uses a separate
Elasticsearch cluster.
2020-03-17 15:09:10 +00:00
#### Optional: deploy Kibana to perform advanced queries
If you are an advanced user and have direct access to your Kubernetes cluster using `kubectl` and `helm` , you can deploy Kibana manually.
The following assumes that `helm` has been [initialized ](https://v2.helm.sh/docs/helm/ ) with `helm init` .
Save the following to `kibana.yml` :
```yaml
elasticsearch:
enabled: false
2020-05-13 15:08:23 +00:00
filebeat:
2020-03-17 15:09:10 +00:00
enabled: false
kibana:
enabled: true
2020-05-13 00:07:50 +00:00
elasticsearchHosts: http://elastic-stack-elasticsearch-master.gitlab-managed-apps.svc.cluster.local:9200
2020-03-17 15:09:10 +00:00
```
Then install it on your cluster:
```shell
2020-05-13 00:07:50 +00:00
helm repo add gitlab https://charts.gitlab.io
helm install --name kibana gitlab/elastic-stack --values kibana.yml
2020-03-17 15:09:10 +00:00
```
2020-04-21 15:21:10 +00:00
To access Kibana, forward the port to your local machine:
2020-03-17 15:09:10 +00:00
```shell
2020-05-13 15:08:23 +00:00
kubectl port-forward svc/kibana-kibana 5601:5601
2020-03-17 15:09:10 +00:00
```
Then, you can visit Kibana at `http://localhost:5601` .
2020-04-14 21:09:52 +00:00
### Fluentd
> Introduced in GitLab 12.10 for project- and group-level clusters.
[Fluentd ](https://www.fluentd.org/ ) is an open source data collector, which enables
you to unify the data collection and consumption to better use and understand
your data. Fluentd sends logs in syslog format.
To enable Fluentd:
1. Navigate to ** {cloud-gear}** **Operations > Kubernetes** and click
**Applications** . You will be prompted to enter a host, port and protocol
where the WAF logs will be sent to via syslog.
2020-04-15 18:09:36 +00:00
1. Provide the host domain name or URL in **SIEM Hostname** .
2020-04-14 21:09:52 +00:00
1. Provide the host port number in **SIEM Port** .
1. Select a **SIEM Protocol** .
2020-04-29 18:09:56 +00:00
1. Select at least one of the available logs (such as WAF or Cilium).
2020-04-15 18:09:36 +00:00
1. Click **Save changes** .
2020-04-14 21:09:52 +00:00
2020-04-29 18:09:56 +00:00
![Fluentd input fields ](img/fluentd_v13_0.png )
2020-04-14 21:09:52 +00:00
2020-02-28 21:09:15 +00:00
### Future apps
Interested in contributing a new GitLab managed app? Visit the
[development guidelines page ](../../development/kubernetes.md#gitlab-managed-apps )
to get started.
2020-03-23 06:09:28 +00:00
## Install using GitLab CI/CD (alpha)
2019-12-03 09:09:09 +00:00
2020-02-06 15:09:11 +00:00
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/20822) in GitLab 12.6.
2019-12-03 09:09:09 +00:00
CAUTION: **Warning:**
This is an _alpha_ feature, and it is subject to change at any time without
prior notice.
This alternative method allows users to install GitLab-managed
2020-03-23 06:09:28 +00:00
applications using GitLab CI/CD. It also allows customization of the
2019-12-03 09:09:09 +00:00
install using Helm `values.yaml` files.
Supported applications:
2020-03-23 06:09:28 +00:00
- [Ingress ](#install-ingress-using-gitlab-cicd )
- [cert-manager ](#install-cert-manager-using-gitlab-cicd )
- [Sentry ](#install-sentry-using-gitlab-cicd )
- [GitLab Runner ](#install-gitlab-runner-using-gitlab-cicd )
- [Cilium ](#install-cilium-using-gitlab-cicd )
2020-06-17 12:08:42 +00:00
- [Falco ](#install-falco-using-gitlab-cicd )
2020-03-23 06:09:28 +00:00
- [Vault ](#install-vault-using-gitlab-cicd )
- [JupyterHub ](#install-jupyterhub-using-gitlab-cicd )
- [Elastic Stack ](#install-elastic-stack-using-gitlab-cicd )
- [Crossplane ](#install-crossplane-using-gitlab-cicd )
2020-04-14 21:09:52 +00:00
- [Fluentd ](#install-fluentd-using-gitlab-cicd )
2020-04-16 03:09:10 +00:00
- [Knative ](#install-knative-using-gitlab-cicd )
2020-05-27 06:08:13 +00:00
- [PostHog ](#install-posthog-using-gitlab-cicd )
2020-06-10 09:08:35 +00:00
- [Prometheus ](#install-prometheus-using-gitlab-cicd )
2019-12-03 09:09:09 +00:00
### Usage
2019-12-20 09:24:38 +00:00
You can find and import all the files referenced below
in the [example cluster applications
project](https://gitlab.com/gitlab-org/cluster-integration/example-cluster-applications/).
2020-03-23 06:09:28 +00:00
To install applications using GitLab CI/CD:
2019-12-03 09:09:09 +00:00
1. Connect the cluster to a [cluster management project ](management_project.md ).
1. In that project, add a `.gitlab-ci.yml` file with the following content:
2020-03-06 03:08:08 +00:00
```yaml
include:
- template: Managed-Cluster-Applications.gitlab-ci.yml
```
2019-12-03 09:09:09 +00:00
2020-07-03 00:09:23 +00:00
NOTE: **Note:**
The job provided by this template connects to the cluster using tools provided
in a custom Docker image. It requires that you have a runner registered with the Docker,
Kubernetes, or Docker Machine executor.
2019-12-03 09:09:09 +00:00
1. Add a `.gitlab/managed-apps/config.yaml` file to define which
applications you would like to install. Define the `installed` key as
`true` to install the application and `false` to uninstall the
application. For example, to install Ingress:
2020-03-06 03:08:08 +00:00
```yaml
ingress:
installed: true
```
2019-12-03 09:09:09 +00:00
1. Optionally, define `.gitlab/managed-apps/<application>/values.yaml` file to
customize values for the installed application.
2020-03-23 06:09:28 +00:00
A GitLab CI/CD pipeline will then run on the `master` branch to install the
2020-01-16 12:08:32 +00:00
applications you have configured. In case of pipeline failure, the
output of the [Helm
Tiller](https://v2.helm.sh/docs/install/#running-tiller-locally) binary
2020-03-10 06:08:07 +00:00
will be saved as a [CI job artifact ](../../ci/pipelines/job_artifacts.md ).
2019-12-03 09:09:09 +00:00
2020-03-18 06:09:38 +00:00
### Important notes
Note the following:
2020-03-26 06:08:40 +00:00
- We recommend using the cluster management project exclusively for managing deployments to a cluster.
Do not add your application's source code to such projects.
2020-03-18 06:09:38 +00:00
- When you set the value for `installed` key back to `false` , the application will be
unprovisioned from the cluster.
- If you update `.gitlab/managed-apps/<application>/values.yaml` with new values, the
application will be redeployed.
2020-03-23 06:09:28 +00:00
### Install Ingress using GitLab CI/CD
2019-12-03 09:09:09 +00:00
2019-12-11 03:07:31 +00:00
To install Ingress, define the `.gitlab/managed-apps/config.yaml` file
2019-12-03 09:09:09 +00:00
with:
```yaml
ingress:
installed: true
```
Ingress will then be installed into the `gitlab-managed-apps` namespace
of your cluster.
2020-04-16 03:09:10 +00:00
You can customize the installation of Ingress by defining a
2019-12-03 09:09:09 +00:00
`.gitlab/managed-apps/ingress/values.yaml` file in your cluster
management project. Refer to the
[chart ](https://github.com/helm/charts/tree/master/stable/nginx-ingress )
for the available configuration options.
2020-07-01 15:08:45 +00:00
NOTE: **Note:**
Support for installing the Ingress managed application is provided by the GitLab Configure group.
If you run into unknown issues, please [open a new issue ](https://gitlab.com/gitlab-org/gitlab/-/issues/new ) and ping at least 2 people from the [Configure group ](https://about.gitlab.com/handbook/product/categories/#configure-group ).
2020-03-23 06:09:28 +00:00
### Install cert-manager using GitLab CI/CD
2020-01-10 09:07:49 +00:00
2020-03-23 06:09:28 +00:00
cert-manager is installed using GitLab CI/CD by defining configuration in
2020-01-10 09:07:49 +00:00
`.gitlab/managed-apps/config.yaml` .
cert-manager:
- Is installed into the `gitlab-managed-apps` namespace of your cluster.
- Can be installed with or without a default [Let's Encrypt `ClusterIssuer` ](https://cert-manager.io/docs/configuration/acme/ ), which requires an
email address to be specified. The email address is used by Let's Encrypt to
contact you about expiring certificates and issues related to your account.
2020-03-23 06:09:28 +00:00
The following configuration is required to install cert-manager using GitLab CI/CD:
2020-01-10 09:07:49 +00:00
```yaml
certManager:
installed: true
letsEncryptClusterIssuer:
installed: true
email: "user@example.com"
```
2020-03-23 06:09:28 +00:00
The following installs cert-manager using GitLab CI/CD without the default `ClusterIssuer` :
2020-01-10 09:07:49 +00:00
```yaml
certManager:
installed: true
letsEncryptClusterIssuer:
installed: false
```
2020-04-16 03:09:10 +00:00
You can customize the installation of cert-manager by defining a
2020-01-10 09:07:49 +00:00
`.gitlab/managed-apps/cert-manager/values.yaml` file in your cluster
management project. Refer to the
[chart ](https://hub.helm.sh/charts/jetstack/cert-manager ) for the
available configuration options.
2020-07-01 15:08:45 +00:00
NOTE: **Note:**
Support for installing the Cert Manager managed application is provided by the GitLab Configure group.
If you run into unknown issues, please [open a new issue ](https://gitlab.com/gitlab-org/gitlab/-/issues/new ) and ping at least 2 people from the [Configure group ](https://about.gitlab.com/handbook/product/categories/#configure-group ).
2020-03-23 06:09:28 +00:00
### Install Sentry using GitLab CI/CD
2019-12-11 15:07:38 +00:00
NOTE: **Note:**
The Sentry Helm chart [recommends ](https://github.com/helm/charts/blob/f6e5784f265dd459c5a77430185d0302ed372665/stable/sentry/values.yaml#L284-L285 ) at least 3GB of available RAM for database migrations.
To install Sentry, define the `.gitlab/managed-apps/config.yaml` file
with:
```yaml
sentry:
installed: true
```
Sentry will then be installed into the `gitlab-managed-apps` namespace
of your cluster.
You can customize the installation of Sentry by defining
`.gitlab/managed-apps/sentry/values.yaml` file in your cluster
management project. Refer to the
[chart ](https://github.com/helm/charts/tree/master/stable/sentry )
for the available configuration options.
We recommend you pay close attention to the following configuration options:
- `email` . Needed to invite users to your Sentry instance and to send error emails.
- `user` . Where you can set the login credentials for the default admin user.
- `postgresql` . For a PostgreSQL password that can be used when running future updates.
NOTE: **Note:**
When upgrading it is important to provide the existing PostgreSQL password (given using the `postgresql.postgresqlPassword` key) or you will receive authentication errors. See the [PostgreSQL chart documentation ](https://github.com/helm/charts/tree/master/stable/postgresql#upgrade ) for more information.
Here is an example configuration for Sentry:
```yaml
# Admin user to create
user:
# Indicated to create the admin user or not,
# Default is true as the initial installation.
create: true
email: "< your email > "
password: "< your password > "
email:
from_address: "< your from email > "
host: smtp
port: 25
use_tls: false
user: "< your email username > "
password: "< your email password > "
enable_replies: false
ingress:
enabled: true
hostname: "< sentry.example.com > "
# Needs to be here between runs.
# See https://github.com/helm/charts/tree/master/stable/postgresql#upgrade for more info
postgresql:
postgresqlPassword: example-postgresql-password
```
2020-07-01 15:08:45 +00:00
NOTE: **Note:**
Support for installing the Sentry managed application is provided by the GitLab Health group.
If you run into unknown issues, please [open a new issue ](https://gitlab.com/gitlab-org/gitlab/-/issues/new ) and ping at least 2 people from the [Health group ](https://about.gitlab.com/handbook/product/product-categories/#health-group ).
2020-05-27 06:08:13 +00:00
### Install PostHog using GitLab CI/CD
[PostHog ](https://www.posthog.com ) 🦔 is a developer-friendly, open-source product analytics platform.
To install PostHog into the `gitlab-managed-apps` namespace of your cluster,
define the `.gitlab/managed-apps/config.yaml` file with:
```yaml
posthog:
installed: true
```
You can customize the installation of PostHog by defining `.gitlab/managed-apps/posthog/values.yaml`
2020-06-10 03:08:17 +00:00
in your cluster management project. Refer to the [Configuration section of the PostHog chart's README ](https://github.com/PostHog/charts/tree/master/charts/posthog )
2020-05-27 06:08:13 +00:00
for the available configuration options.
NOTE: **Note:**
You must provide a PostgreSQL password in `postgresql.postgresqlPassword`
or you will receive authentication errors.
See the [PostgreSQL chart documentation ](https://github.com/helm/charts/tree/master/stable/postgresql#upgrade ) for more information.
Redis pods are restarted between upgrades. To prevent downtime, provide a Redis
password using the `redis.password` key. This prevents a new password from
being generated on each restart.
Here is an example configuration for PostHog:
```yaml
ingress:
enabled: true
hostname: "< posthog.example.com > "
# This will be autogenerated if you skip it. Include if you have 2 or more web replicas
posthogSecret: 'long-secret-key-used-to-sign-cookies'
# Needs to be here between runs.
# See https://github.com/helm/charts/tree/master/stable/postgresql#upgrade for more info
postgresql:
postgresqlPassword: example-postgresql-password
# Recommended to set this to a value to redis prevent downtime between upgrades
redis:
password: example-redis-password
```
NOTE: **Note:**
Support for the PostHog managed application is provided by the PostHog team.
If you run into issues, please [open a support ticket ](https://github.com/PostHog/posthog/issues/new/choose ) directly.
2020-06-10 09:08:35 +00:00
### Install Prometheus using GitLab CI/CD
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/25138) in GitLab 12.8.
[Prometheus ](https://prometheus.io/docs/introduction/overview/ ) is an
open-source monitoring and alerting system for supervising your
deployed applications.
To install Prometheus into the `gitlab-managed-apps` namespace of your cluster,
define the `.gitlab/managed-apps/config.yaml` file with:
```yaml
prometheus:
installed: true
```
You can customize the installation of Prometheus by defining
`.gitlab/managed-apps/prometheus/values.yaml` in your cluster management
project. Refer to the
[Configuration section of the Prometheus chart's README ](https://github.com/helm/charts/tree/master/stable/prometheus#configuration )
for the available configuration options.
2020-07-01 15:08:45 +00:00
NOTE: **Note:**
Support for installing the Prometheus managed application is provided by the GitLab APM group.
If you run into unknown issues, please [open a new issue ](https://gitlab.com/gitlab-org/gitlab/-/issues/new ) and ping at least 2 people from the [APM group ](https://about.gitlab.com/handbook/product/product-categories/#apm-group ).
2020-03-23 06:09:28 +00:00
### Install GitLab Runner using GitLab CI/CD
2020-01-16 21:08:24 +00:00
2020-03-23 06:09:28 +00:00
GitLab Runner is installed using GitLab CI/CD by defining configuration in
2020-01-16 21:08:24 +00:00
`.gitlab/managed-apps/config.yaml` .
2020-03-23 06:09:28 +00:00
The following configuration is required to install GitLab Runner using GitLab CI/CD:
2020-01-16 21:08:24 +00:00
```yaml
gitlabRunner:
installed: true
```
GitLab Runner is installed into the `gitlab-managed-apps` namespace of your cluster.
In order for GitLab Runner to function, you **must** specify the following:
2020-02-28 09:09:01 +00:00
- `gitlabUrl` - the GitLab server full URL (for example, `https://example.gitlab.com` ) to register the Runner against.
2020-01-16 21:08:24 +00:00
- `runnerRegistrationToken` - The registration token for adding new Runners to GitLab. This must be
[retrieved from your GitLab instance ](../../ci/runners/README.md ).
2020-04-21 15:21:10 +00:00
These values can be specified using [CI variables ](../../ci/variables/README.md ):
2020-01-16 21:08:24 +00:00
- `GITLAB_RUNNER_GITLAB_URL` will be used for `gitlabUrl` .
- `GITLAB_RUNNER_REGISTRATION_TOKEN` will be used for `runnerRegistrationToken`
You can customize the installation of GitLab Runner by defining
`.gitlab/managed-apps/gitlab-runner/values.yaml` file in your cluster
management project. Refer to the
[chart ](https://gitlab.com/gitlab-org/charts/gitlab-runner ) for the
available configuration options.
2020-07-01 15:08:45 +00:00
NOTE: **Note:**
2020-07-09 00:09:11 +00:00
Support for installing the Runner managed application is provided by the GitLab Runner group.
2020-07-01 15:08:45 +00:00
If you run into unknown issues, please [open a new issue ](https://gitlab.com/gitlab-org/gitlab/-/issues/new ) and ping at least 2 people from the [Runner group ](https://about.gitlab.com/handbook/product/product-categories/#runner-group ).
2020-03-23 06:09:28 +00:00
### Install Cilium using GitLab CI/CD
2020-01-20 18:08:44 +00:00
2020-02-10 00:09:07 +00:00
> [Introduced](https://gitlab.com/gitlab-org/cluster-integration/cluster-applications/-/merge_requests/22) in GitLab 12.8.
2020-01-20 18:08:44 +00:00
2020-04-24 00:09:28 +00:00
[Cilium ](https://cilium.io/ ) is a networking plugin for Kubernetes that you can use to implement
support for [NetworkPolicy ](https://kubernetes.io/docs/concepts/services-networking/network-policies/ )
resources. For more information, see [Network Policies ](../../topics/autodevops/stages.md#network-policy ).
< i class = "fa fa-youtube-play youtube" aria-hidden = "true" > < / i >
For an overview, see the [Container Network Security Demo for GitLab 12.8 ](https://www.youtube.com/watch?v=pgUEdhdhoUI ).
2020-01-20 18:08:44 +00:00
Enable Cilium in the `.gitlab/managed-apps/config.yaml` file to install it:
```yaml
2020-07-28 18:09:36 +00:00
# possible values are gke or eks
2020-01-20 18:08:44 +00:00
clusterType: gke
cilium:
installed: true
```
2020-07-28 18:09:36 +00:00
The `clusterType` variable enables the recommended Helm variables for a corresponding cluster type.
You can check the recommended variables for each cluster type in the official documentation:
2020-01-20 18:08:44 +00:00
2020-07-13 21:09:24 +00:00
- [Google GKE ](https://docs.cilium.io/en/stable/gettingstarted/k8s-install-gke/#deploy-cilium )
- [AWS EKS ](https://docs.cilium.io/en/stable/gettingstarted/k8s-install-eks/#deploy-cilium )
2020-01-20 18:08:44 +00:00
You can customize Cilium's Helm variables by defining the
`.gitlab/managed-apps/cilium/values.yaml` file in your cluster
management project. Refer to the
[Cilium chart ](https://github.com/cilium/cilium/tree/master/install/kubernetes/cilium )
for the available configuration options.
CAUTION: **Caution:**
2020-05-08 18:09:55 +00:00
Installation and removal of the Cilium requires a **manual**
2020-07-13 21:09:24 +00:00
[restart ](https://docs.cilium.io/en/stable/gettingstarted/k8s-install-gke/#restart-unmanaged-pods )
2020-01-20 18:08:44 +00:00
of all affected pods in all namespaces to ensure that they are
2020-07-13 21:09:24 +00:00
[managed ](https://docs.cilium.io/en/stable/troubleshooting/#ensure-pod-is-managed-by-cilium )
2020-01-20 18:08:44 +00:00
by the correct networking plugin.
NOTE: **Note:**
Major upgrades might require additional setup steps, please consult
the official [upgrade guide ](https://docs.cilium.io/en/stable/install/upgrade/ ) for more
information.
2020-07-15 03:09:15 +00:00
By default, Cilium's [audit
mode](https://docs.cilium.io/en/v1.8/gettingstarted/policy-creation/?highlight=policy-audit#enable-policy-audit-mode)
is enabled. In audit mode, Cilium doesn't drop disallowed packets. You
can use `policy-verdict` log to observe policy-related decisions. You
can disable audit mode by adding the following to
2020-02-05 09:08:43 +00:00
`.gitlab/managed-apps/cilium/values.yaml` :
2020-02-26 18:09:24 +00:00
```yaml
2020-07-07 06:09:06 +00:00
config:
2020-07-15 03:09:15 +00:00
policyAuditMode: false
2020-02-05 09:08:43 +00:00
agent:
monitor:
2020-07-15 03:09:15 +00:00
eventTypes: ["drop"]
2020-02-05 09:08:43 +00:00
```
The Cilium monitor log for traffic is logged out by the
2020-02-26 18:09:24 +00:00
`cilium-monitor` sidecar container. You can check these logs with the following command:
2020-01-20 18:08:44 +00:00
2020-01-30 15:09:15 +00:00
```shell
2020-07-22 18:09:27 +00:00
kubectl -n gitlab-managed-apps logs -l k8s-app=cilium -c cilium-monitor
2020-01-20 18:08:44 +00:00
```
2020-02-26 18:09:24 +00:00
You can disable the monitor log in `.gitlab/managed-apps/cilium/values.yaml` :
2020-01-20 18:08:44 +00:00
2020-02-26 18:09:24 +00:00
```yaml
2020-01-20 18:08:44 +00:00
agent:
monitor:
enabled: false
```
2020-04-06 15:10:04 +00:00
The [Hubble ](https://github.com/cilium/hubble ) monitoring daemon is
enabled by default and it's set to collect per namespace flow
metrics. This metrics are accessible on the [Threat Monitoring ](../application_security/threat_monitoring/index.md )
dashboard. You can disable Hubble by adding the following to
2020-07-07 06:09:06 +00:00
`.gitlab/managed-apps/cilium/values.yaml` :
2020-04-06 15:10:04 +00:00
```yaml
2020-07-07 06:09:06 +00:00
global:
2020-04-06 15:10:04 +00:00
hubble:
2020-07-07 06:09:06 +00:00
enabled: false
2020-04-06 15:10:04 +00:00
```
You can also adjust Helm values for Hubble via
2020-07-07 06:09:06 +00:00
`.gitlab/managed-apps/cilium/values.yaml` :
2020-04-06 15:10:04 +00:00
```yaml
2020-07-07 06:09:06 +00:00
global:
hubble:
enabled: true
metrics:
enabled:
- 'flow:sourceContext=namespace;destinationContext=namespace'
2020-04-06 15:10:04 +00:00
```
2020-07-01 15:08:45 +00:00
NOTE: **Note:**
Support for installing the Cilium managed application is provided by the GitLab Container Security group.
If you run into unknown issues, please [open a new issue ](https://gitlab.com/gitlab-org/gitlab/-/issues/new ) and ping at least 2 people from the [Container Security group ](https://about.gitlab.com/handbook/product/product-categories/#container-security-group ).
2020-06-17 12:08:42 +00:00
### Install Falco using GitLab CI/CD
> [Introduced](https://gitlab.com/gitlab-org/cluster-integration/cluster-applications/-/merge_requests/91) in GitLab 13.1.
GitLab Container Host Security Monitoring uses [Falco ](https://falco.org/ )
as a runtime security tool that listens to the Linux kernel using eBPF. Falco parses system calls
and asserts the stream against a configurable rules engine in real-time. For more information, see
[Falco's Documentation ](https://falco.org/docs/ ).
You can enable Falco in the
`.gitlab/managed-apps/config.yaml` file:
```yaml
falco:
installed: true
```
You can customize Falco's Helm variables by defining the
`.gitlab/managed-apps/falco/values.yaml` file in your cluster
management project. Refer to the
2020-06-22 18:08:47 +00:00
[Falco chart ](https://github.com/falcosecurity/charts/tree/master/falco )
2020-06-17 12:08:42 +00:00
for the available configuration options.
CAUTION: **Caution:**
By default eBPF support is enabled and Falco will use an [eBPF probe ](https://falco.org/docs/event-sources/drivers/#using-the-ebpf-probe ) to pass system calls to userspace.
If your cluster doesn't support this, you can configure it to use Falco kernel module instead by adding the following to `.gitlab/managed-apps/falco/values.yaml` :
```yaml
ebpf:
enabled: false
```
In rare cases where automatic probe installation on your cluster isn't possible and the kernel/probe
isn't precompiled, you may need to manually prepare the kernel module or eBPF probe with
[driverkit ](https://github.com/falcosecurity/driverkit#against-a-kubernetes-cluster )
and install it on each cluster node.
By default, Falco is deployed with a limited set of rules. To add more rules, add the following to
`.gitlab/managed-apps/falco/values.yaml` (you can get examples from
[Cloud Native Security Hub ](https://securityhub.dev/ )):
```yaml
customRules:
file-integrity.yaml: |-
- rule: Detect New File
desc: detect new file created
condition: >
evt.type = chmod or evt.type = fchmod
output: >
File below a known directory opened for writing (user=%user.name
command=%proc.cmdline file=%fd.name parent=%proc.pname pcmdline=%proc.pcmdline gparent=%proc.aname[2])
priority: ERROR
tags: [filesystem]
- rule: Detect New Directory
desc: detect new directory created
condition: >
mkdir
output: >
File below a known directory opened for writing (user=%user.name
command=%proc.cmdline file=%fd.name parent=%proc.pname pcmdline=%proc.pcmdline gparent=%proc.aname[2])
priority: ERROR
tags: [filesystem]
```
By default, Falco only outputs security events to logs as JSON objects. To set it to output to an
2020-06-26 12:08:51 +00:00
[external API ](https://falco.org/docs/alerts/#https-output-send-alerts-to-an-https-end-point )
or [application ](https://falco.org/docs/alerts/#program-output ),
2020-06-17 12:08:42 +00:00
add the following to `.gitlab/managed-apps/falco/values.yaml` :
```yaml
falco:
programOutput:
enabled: true
keepAlive: false
program: mail -s "Falco Notification" someone@example.com
httpOutput:
enabled: true
url: http://some.url
```
You can check these logs with the following command:
```shell
2020-07-22 18:09:27 +00:00
kubectl -n gitlab-managed-apps logs -l app=falco
2020-06-17 12:08:42 +00:00
```
2020-07-01 15:08:45 +00:00
NOTE: **Note:**
Support for installing the Falco managed application is provided by the GitLab Container Security group.
If you run into unknown issues, please [open a new issue ](https://gitlab.com/gitlab-org/gitlab/-/issues/new ) and ping at least 2 people from the [Container Security group ](https://about.gitlab.com/handbook/product/product-categories/#container-security-group ).
2020-03-23 06:09:28 +00:00
### Install Vault using GitLab CI/CD
2020-03-18 03:09:43 +00:00
2020-05-22 03:08:28 +00:00
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/9982) in GitLab 12.9.
2020-03-18 03:09:43 +00:00
2020-04-04 09:09:16 +00:00
[Hashicorp Vault ](https://www.vaultproject.io/ ) is a secrets management solution which
2020-03-18 03:09:43 +00:00
can be used to safely manage and store passwords, credentials, certificates and more. A Vault
installation could be leveraged to provide a single secure data store for credentials
2020-03-23 06:09:28 +00:00
used in your applications, GitLab CI/CD jobs, and more. It could also serve as a way of
2020-03-18 03:09:43 +00:00
providing SSL/TLS certificates to systems and deployments in your infrastructure. Leveraging
Vault as a single source for all these credentials allows greater security by having
a single source of access, control, and auditability around all your sensitive
credentials and certificates.
To install Vault, enable it in the `.gitlab/managed-apps/config.yaml` file:
```yaml
vault:
installed: true
```
2020-05-14 21:07:52 +00:00
By default you will get a basic Vault setup with no scalable
storage backend. This is enough for simple testing and small-scale deployments, though has limits
2020-03-18 03:09:43 +00:00
to how much it can scale, and as it is a single instance deployment, you will experience downtime
when upgrading the Vault application.
To optimally use Vault in a production environment, it's ideal to have a good understanding
of the internals of Vault and how to configure it. This can be done by reading the
2020-06-04 21:08:11 +00:00
[the Vault documentation ](https://www.vaultproject.io/docs/internals ) as well as
2020-04-21 15:21:10 +00:00
the Vault Helm chart [`values.yaml` file ](https://github.com/hashicorp/vault-helm/blob/v0.3.3/values.yaml ).
2020-03-18 03:09:43 +00:00
At a minimum you will likely set up:
2020-06-04 21:08:11 +00:00
- A [seal ](https://www.vaultproject.io/docs/configuration/seal ) for extra encryption
2020-03-18 03:09:43 +00:00
of the master key.
2020-06-04 21:08:11 +00:00
- A [storage backend ](https://www.vaultproject.io/docs/configuration/storage ) that is
2020-03-18 03:09:43 +00:00
suitable for environment and storage security requirements.
2020-06-04 21:08:11 +00:00
- [HA Mode ](https://www.vaultproject.io/docs/concepts/ha ).
- [The Vault UI ](https://www.vaultproject.io/docs/configuration/ui ).
2020-03-18 03:09:43 +00:00
The following is an example values file (`.gitlab/managed-apps/vault/values.yaml`)
that configures Google Key Management Service for auto-unseal, using a Google Cloud Storage backend, enabling
the Vault UI, and enabling HA with 3 pod replicas. The `storage` and `seal` stanzas
below are examples and should be replaced with settings specific to your environment.
```yaml
# Enable the Vault WebUI
ui:
enabled: true
server:
2020-07-27 21:09:16 +00:00
# Disable the built in data storage volume as it's not safe for High Availability mode
2020-03-18 03:09:43 +00:00
dataStorage:
enabled: false
# Enable High Availability Mode
ha:
enabled: true
# Configure Vault to listen on port 8200 for normal traffic and port 8201 for inter-cluster traffic
config: |
listener "tcp" {
tls_disable = 1
address = "[::]:8200"
cluster_address = "[::]:8201"
}
# Configure Vault to store its data in a GCS Bucket backend
storage "gcs" {
path = "gcs://my-vault-storage/vault-bucket"
ha_enabled = "true"
}
# Configure Vault to automatically unseal storage using a GKMS key
seal "gcpckms" {
project = "vault-helm-dev-246514"
region = "global"
key_ring = "vault-helm-unseal-kr"
crypto_key = "vault-helm-unseal-key"
}
```
Once you have successfully installed Vault, you will need to [initialize the Vault ](https://learn.hashicorp.com/vault/getting-started/deploy#initializing-the-vault )
and obtain the initial root token. You will need access to your Kubernetes cluster that Vault has been deployed into in order to do this.
2020-07-27 21:09:16 +00:00
To initialize the Vault, get a shell to one of the Vault pods running inside Kubernetes (typically this is done by using the `kubectl` command line tool).
2020-03-18 03:09:43 +00:00
Once you have a shell into the pod, run the `vault operator init` command:
```shell
kubectl -n gitlab-managed-apps exec -it vault-0 sh
/ $ vault operator init
```
This should give you your unseal keys and initial root token. Make sure to note these down
and keep these safe as you will need them to unseal the Vault throughout its lifecycle.
2020-07-01 15:08:45 +00:00
NOTE: **Note:**
Support for installing the Vault managed application is provided by the GitLab Release Management group.
If you run into unknown issues, please [open a new issue ](https://gitlab.com/gitlab-org/gitlab/-/issues/new ) and ping at least 2 people from the [Release Management group ](https://about.gitlab.com/handbook/product/product-categories/#release-management-group ).
2020-03-23 06:09:28 +00:00
### Install JupyterHub using GitLab CI/CD
2020-02-13 03:09:05 +00:00
> [Introduced](https://gitlab.com/gitlab-org/cluster-integration/cluster-applications/-/merge_requests/40) in GitLab 12.8.
2020-03-23 06:09:28 +00:00
JupyterHub is installed using GitLab CI/CD by defining configuration in
2020-02-28 09:09:01 +00:00
`.gitlab/managed-apps/config.yaml` as follows:
2020-02-13 03:09:05 +00:00
```yaml
jupyterhub:
installed: true
gitlabProjectIdWhitelist: []
gitlabGroupWhitelist: []
```
2020-02-28 09:09:01 +00:00
In the configuration:
2020-02-13 03:09:05 +00:00
2020-02-28 09:09:01 +00:00
- `gitlabProjectIdWhitelist` restricts GitLab authentication to only members of the specified projects.
- `gitlabGroupWhitelist` restricts GitLab authentication to only members of the specified groups.
- Specifying an empty array for both will allow any user on the GitLab instance to sign in.
2020-02-13 03:09:05 +00:00
2020-02-28 09:09:01 +00:00
JupyterHub is installed into the `gitlab-managed-apps` namespace of your cluster.
2020-02-13 03:09:05 +00:00
2020-02-28 09:09:01 +00:00
For JupyterHub to function, you must set up an [OAuth Application ](../../integration/oauth_provider.md ).
Set:
2020-02-13 03:09:05 +00:00
2020-02-28 09:09:01 +00:00
- "Redirect URI" to `http://<JupyterHub Host>/hub/oauth_callback` .
- "Scope" to `api read_repository write_repository` .
2020-02-13 03:09:05 +00:00
2020-02-28 09:09:01 +00:00
In addition, the following variables must be specified using [CI variables ](../../ci/variables/README.md ):
2020-02-13 03:09:05 +00:00
2020-02-28 09:09:01 +00:00
| CI Variable | Description |
|:---------------------------------------|:--------------------------------------------------------------------------------------------------------------------------------------------------------------------|
2020-04-30 06:10:03 +00:00
| `JUPYTERHUB_PROXY_SECRET_TOKEN` | Secure string used for signing communications from the hub. See[`proxy.secretToken`](https://zero-to-jupyterhub.readthedocs.io/en/stable/reference/reference.html#proxy-secrettoken). |
| `JUPYTERHUB_COOKIE_SECRET` | Secure string used for signing secure cookies. See [`hub.cookieSecret` ](https://zero-to-jupyterhub.readthedocs.io/en/stable/reference/reference.html#hub-cookiesecret ). |
2020-02-28 09:09:01 +00:00
| `JUPYTERHUB_HOST` | Hostname used for the installation. For example, `jupyter.gitlab.example.com` . |
| `JUPYTERHUB_GITLAB_HOST` | Hostname of the GitLab instance used for authentication. For example, `gitlab.example.com` . |
2020-04-30 06:10:03 +00:00
| `JUPYTERHUB_AUTH_CRYPTO_KEY` | A 32-byte encryption key used to set [`auth.state.cryptoKey` ](https://zero-to-jupyterhub.readthedocs.io/en/stable/reference/reference.html#auth-state-cryptokey ). |
2020-02-28 09:09:01 +00:00
| `JUPYTERHUB_AUTH_GITLAB_CLIENT_ID` | "Application ID" for the OAuth Application. |
| `JUPYTERHUB_AUTH_GITLAB_CLIENT_SECRET` | "Secret" for the OAuth Application. |
By default, JupyterHub will be installed using a
2020-02-13 03:09:05 +00:00
[default values file ](https://gitlab.com/gitlab-org/cluster-integration/cluster-applications/-/blob/master/src/default-data/jupyterhub/values.yaml.gotmpl ).
2020-02-28 09:09:01 +00:00
You can customize the installation of JupyterHub by defining a
`.gitlab/managed-apps/jupyterhub/values.yaml` file in your cluster management project.
Refer to the
2020-06-17 03:08:38 +00:00
[chart reference ](https://zero-to-jupyterhub.readthedocs.io/en/stable/reference/reference.html ) for the
2020-02-28 09:09:01 +00:00
available configuration options.
2020-02-13 03:09:05 +00:00
2020-07-01 15:08:45 +00:00
NOTE: **Note:**
Support for installing the JupyterHub managed application is provided by the GitLab Configure group.
If you run into unknown issues, please [open a new issue ](https://gitlab.com/gitlab-org/gitlab/-/issues/new ) and ping at least 2 people from the [Configure group ](https://about.gitlab.com/handbook/product/categories/#configure-group ).
2020-03-23 06:09:28 +00:00
### Install Elastic Stack using GitLab CI/CD
2020-02-18 00:09:20 +00:00
2020-06-10 09:08:35 +00:00
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/25138) in GitLab 12.8.
2020-02-18 00:09:20 +00:00
2020-03-23 06:09:28 +00:00
Elastic Stack is installed using GitLab CI/CD by defining configuration in
2020-02-18 00:09:20 +00:00
`.gitlab/managed-apps/config.yaml` .
2020-03-23 06:09:28 +00:00
The following configuration is required to install Elastic Stack using GitLab CI/CD:
2020-02-18 00:09:20 +00:00
```yaml
elasticStack:
installed: true
```
Elastic Stack is installed into the `gitlab-managed-apps` namespace of your cluster.
2020-04-21 15:21:10 +00:00
You can check the default [`values.yaml` ](https://gitlab.com/gitlab-org/gitlab/-/blob/master/vendor/elastic_stack/values.yaml ) we set for this chart.
2020-02-18 00:09:20 +00:00
You can customize the installation of Elastic Stack by defining
`.gitlab/managed-apps/elastic-stack/values.yaml` file in your cluster
management project. Refer to the
2020-05-13 00:07:50 +00:00
[chart ](https://gitlab.com/gitlab-org/charts/elastic-stack ) for the
2020-02-18 00:09:20 +00:00
available configuration options.
NOTE: **Note:**
2020-03-10 12:08:16 +00:00
In this alpha implementation of installing Elastic Stack through CI, reading the environment logs through Elasticsearch is unsupported. This is supported if [installed via the UI ](#elastic-stack ).
2020-02-18 00:09:20 +00:00
2020-07-01 15:08:45 +00:00
NOTE: **Note:**
Support for installing the Elastic Stack managed application is provided by the GitLab APM group.
If you run into unknown issues, please [open a new issue ](https://gitlab.com/gitlab-org/gitlab/-/issues/new ) and ping at least 2 people from the [APM group ](https://about.gitlab.com/handbook/product/product-categories/#apm-group ).
2020-03-23 06:09:28 +00:00
### Install Crossplane using GitLab CI/CD
2020-03-13 03:09:49 +00:00
2020-05-22 03:08:28 +00:00
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/35675) in GitLab 12.9.
2020-03-13 03:09:49 +00:00
2020-03-23 06:09:28 +00:00
Crossplane is installed using GitLab CI/CD by defining configuration in
2020-03-13 03:09:49 +00:00
`.gitlab/managed-apps/config.yaml` .
2020-03-23 06:09:28 +00:00
The following configuration is required to install Crossplane using GitLab CI/CD:
2020-03-13 03:09:49 +00:00
```yaml
Crossplane:
installed: true
```
Crossplane is installed into the `gitlab-managed-apps` namespace of your cluster.
2020-04-21 15:21:10 +00:00
You can check the default
[`values.yaml` ](https://github.com/crossplane/crossplane/blob/master/cluster/charts/crossplane/values.yaml.tmpl )
we set for this chart.
2020-03-13 03:09:49 +00:00
You can customize the installation of Crossplane by defining
`.gitlab/managed-apps/crossplane/values.yaml` file in your cluster
management project. Refer to the
[chart ](https://github.com/crossplane/crossplane/tree/master/cluster/charts/crossplane#configuration ) for the
2020-04-21 15:21:10 +00:00
available configuration options. Note that this link points to the documentation for the current development release, which may differ from the version you have installed.
2020-03-13 03:09:49 +00:00
2020-07-01 15:08:45 +00:00
NOTE: **Note:**
Support for the Crossplane managed application is provided by the Crossplane team.
If you run into issues, please [open a support ticket ](https://github.com/crossplane/crossplane/issues/new/choose ) directly.
2020-04-14 21:09:52 +00:00
### Install Fluentd using GitLab CI/CD
> [Introduced](https://gitlab.com/gitlab-org/cluster-integration/cluster-applications/-/merge_requests/76) in GitLab 12.10.
To install Fluentd into the `gitlab-managed-apps` namespace of your cluster using GitLab CI/CD, define the following configuration in `.gitlab/managed-apps/config.yaml` :
```yaml
Fluentd:
installed: true
```
2020-04-21 15:21:10 +00:00
You can also review the default values set for this chart in the [`values.yaml` ](https://github.com/helm/charts/blob/master/stable/fluentd/values.yaml ) file.
2020-04-14 21:09:52 +00:00
You can customize the installation of Fluentd by defining
`.gitlab/managed-apps/fluentd/values.yaml` file in your cluster management
project. Refer to the
[configuration chart for the current development release of Fluentd ](https://github.com/helm/charts/tree/master/stable/fluentd#configuration )
for the available configuration options.
NOTE: **Note:**
The configuration chart link points to the current development release, which
may differ from the version you have installed. To ensure compatibility, switch
to the specific branch or tag you are using.
2020-07-01 15:08:45 +00:00
NOTE: **Note:**
Support for installing the Fluentd managed application is provided by the GitLab Container Security group.
If you run into unknown issues, please [open a new issue ](https://gitlab.com/gitlab-org/gitlab/-/issues/new ) and ping at least 2 people from the [Container Security group ](https://about.gitlab.com/handbook/product/product-categories/#container-security-group ).
2020-04-16 03:09:10 +00:00
### Install Knative using GitLab CI/CD
To install Knative, define the `.gitlab/managed-apps/config.yaml` file
with:
```yaml
knative:
installed: true
```
You can customize the installation of Knative by defining `.gitlab/managed-apps/knative/values.yaml`
file in your cluster management project. Refer to the [chart ](https://gitlab.com/gitlab-org/charts/knative )
for the available configuration options.
Here is an example configuration for Knative:
```yaml
domain: 'my.wildcard.A.record.dns'
```
If you plan to use GitLab Serverless capabilities, be sure to set an A record wildcard domain on your custom configuration.
2020-07-01 15:08:45 +00:00
NOTE: **Note:**
Support for installing the Knative managed application is provided by the GitLab Configure group.
If you run into unknown issues, please [open a new issue ](https://gitlab.com/gitlab-org/gitlab/-/issues/new ) and ping at least 2 people from the [Configure group ](https://about.gitlab.com/handbook/product/categories/#configure-group ).
2020-04-16 03:09:10 +00:00
#### Knative Metrics
GitLab provides [Invocation Metrics ](../project/clusters/serverless/index.md#invocation-metrics ) for your functions. To collect these metrics, you must have:
1. Knative and Prometheus managed applications installed on your cluster.
1. Manually applied the custom metrics on your cluster by running the following command:
2020-05-21 03:08:00 +00:00
```shell
2020-04-16 03:09:10 +00:00
kubectl apply -f https://gitlab.com/gitlab-org/cluster-integration/cluster-applications/-/raw/02c8231e30ef5b6725e6ba368bc63863ceb3c07d/src/default-data/knative/istio-metrics.yaml
```
#### Uninstall Knative
To uninstall Knative, you must first manually remove any custom metrics you have added
by running the following command:
2020-05-21 03:08:00 +00:00
```shell
2020-04-16 03:09:10 +00:00
kubectl delete -f https://gitlab.com/gitlab-org/cluster-integration/cluster-applications/-/raw/02c8231e30ef5b6725e6ba368bc63863ceb3c07d/src/default-data/knative/istio-metrics.yaml
```
2020-06-19 06:08:36 +00:00
### Install AppArmor using GitLab CI/CD
> [Introduced](https://gitlab.com/gitlab-org/cluster-integration/cluster-applications/-/merge_requests/100) in GitLab 13.1.
To install AppArmor into the `gitlab-managed-apps` namespace of your cluster using GitLab CI/CD, define the following configuration in `.gitlab/managed-apps/config.yaml` :
```yaml
apparmor:
installed: true
```
You can define one or more AppArmor profiles by adding them into `.gitlab/managed-apps/apparmor/values.yaml` as the following:
```yaml
profiles:
profile-one: |-
profile profile-one {
file,
}
```
Refer to the [AppArmor chart ](https://gitlab.com/gitlab-org/charts/apparmor ) for more information on this chart.
#### Using AppArmor profiles in your deployments
After installing AppAmor, you can use profiles by adding Pod Annotations. If you're using Auto
DevOps, you can [customize `auto-deploy-values.yaml` ](../../topics/autodevops/customize.md#customize-values-for-helm-chart )
to annotate your pods. Although it's helpful to be aware of the [list of custom attributes ](https://gitlab.com/gitlab-org/charts/auto-deploy-app#gitlabs-auto-deploy-helm-chart ), you're only required to set
`podAnnotations` as follows:
```yaml
podAnnotations:
container.apparmor.security.beta.kubernetes.io/auto-deploy-app: localhost/profile-one
```
The only information to be changed here is the profile name which is `profile-one` in this example. Refer to the [AppArmor tutorial ](https://kubernetes.io/docs/tutorials/clusters/apparmor/#securing-a-pod ) for more information on how AppArmor is integrated in Kubernetes.
2020-07-15 03:09:15 +00:00
#### Using PodSecurityPolicy in your deployments
NOTE: **Note:**
To enable AppArmor annotations on a Pod Security Policy you must first
load the correspondingAppArmor profile.
[Pod Security Policies ](https://kubernetes.io/docs/concepts/policy/pod-security-policy/ )are
resources at the cluster level that control security-related
properties of deployed pods. You can use such a policy to enable
loaded AppArmor profiles and apply necessary pod restrictions across a
cluster. You can deploy a new policy by adding the following
to`.gitlab/managed-apps/apparmor/values.yaml`:
```yaml
securityPolicies:
example:
defaultProfile: profile-one
allowedProfiles:
- profile-one
- profile-two
spec:
privileged: false
seLinux:
rule: RunAsAny
supplementalGroups:
rule: RunAsAny
runAsUser:
rule: RunAsAny
fsGroup:
rule: RunAsAny
volumes:
- '*'
```
This example creates a single policy named `example` with the provided
specification, and enables [AppArmor
annotations](https://kubernetes.io/docs/tutorials/clusters/apparmor/#podsecuritypolicy-annotations)on
it.
2020-07-01 15:08:45 +00:00
NOTE: **Note:**
Support for installing the AppArmor managed application is provided by the GitLab Container Security group.
If you run into unknown issues, please [open a new issue ](https://gitlab.com/gitlab-org/gitlab/-/issues/new ) and ping at least 2 people from the [Container Security group ](https://about.gitlab.com/handbook/product/product-categories/#container-security-group ).
2020-07-17 00:09:37 +00:00
## Browse applications logs
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/36769) in GitLab 13.2.
Logs produced by pods running **GitLab Managed Apps** can be browsed using [**Log Explorer** ](../project/clusters/kubernetes_pod_logs.md ).
2019-05-27 03:59:59 +00:00
## Upgrading applications
2020-02-06 15:09:11 +00:00
> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/24789) in GitLab 11.8.
2019-05-27 03:59:59 +00:00
The applications below can be upgraded.
| Application | GitLab version |
| ----------- | -------------- |
| Runner | 11.8+ |
To upgrade an application:
1. For a:
2019-08-06 11:27:50 +00:00
- [Project-level cluster ](../project/clusters/index.md ),
navigate to your project's **Operations > Kubernetes** .
- [Group-level cluster ](../group/clusters/index.md ),
navigate to your group's **Kubernetes** page.
2019-05-27 03:59:59 +00:00
1. Select your cluster.
1. If an upgrade is available, the **Upgrade** button is displayed. Click the button to upgrade.
NOTE: **Note:**
Upgrades will reset values back to the values built into the `runner`
chart plus the values set by
2019-09-18 18:06:14 +00:00
[`values.yaml` ](https://gitlab.com/gitlab-org/gitlab/blob/master/vendor/runner/values.yaml )
2019-05-27 03:59:59 +00:00
## Uninstalling applications
2020-05-22 03:08:28 +00:00
> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/60665) in GitLab 11.11.
2019-05-27 03:59:59 +00:00
The applications below can be uninstalled.
| Application | GitLab version | Notes |
| ----------- | -------------- | ----- |
2020-03-31 06:07:50 +00:00
| cert-manager | 12.2+ | The associated private key will be deleted and cannot be restored. Deployed applications will continue to use HTTPS, but certificates will not be renewed. Before uninstalling, you may wish to [back up your configuration ](https://cert-manager.io/docs/tutorials/backup/ ) or [revoke your certificates ](https://letsencrypt.org/docs/revoking/ ). |
2019-07-16 16:11:10 +00:00
| GitLab Runner | 12.2+ | Any running pipelines will be canceled. |
2019-09-25 03:06:21 +00:00
| Helm | 12.2+ | The associated Tiller pod, the `gitlab-managed-apps` namespace, and all of its resources will be deleted and cannot be restored. |
2019-07-02 12:59:59 +00:00
| Ingress | 12.1+ | The associated load balancer and IP will be deleted and cannot be restored. Furthermore, it can only be uninstalled if JupyterHub is not installed. |
2019-07-01 15:57:24 +00:00
| JupyterHub | 12.1+ | All data not committed to GitLab will be deleted and cannot be restored. |
2019-07-31 11:58:38 +00:00
| Knative | 12.1+ | The associated IP will be deleted and cannot be restored. |
2019-05-27 03:59:59 +00:00
| Prometheus | 11.11+ | All data will be deleted and cannot be restored. |
2019-11-16 03:06:13 +00:00
| Crossplane | 12.5+ | All data will be deleted and cannot be restored. |
2020-01-14 00:08:14 +00:00
| Elastic Stack | 12.7+ | All data will be deleted and cannot be restored. |
2019-12-11 15:07:38 +00:00
| Sentry | 12.6+ | The PostgreSQL persistent volume will remain and should be manually removed for complete uninstall. |
2019-05-27 03:59:59 +00:00
To uninstall an application:
1. For a:
2019-08-06 11:27:50 +00:00
- [Project-level cluster ](../project/clusters/index.md ),
navigate to your project's **Operations > Kubernetes** .
- [Group-level cluster ](../group/clusters/index.md ),
navigate to your group's **Kubernetes** page.
2019-05-27 03:59:59 +00:00
1. Select your cluster.
1. Click the **Uninstall** button for the application.
Support for uninstalling all applications is planned for progressive rollout.
To follow progress, see [the relevant
epic](https://gitlab.com/groups/gitlab-org/-/epics/1201).
## Troubleshooting applications
Applications can fail with the following error:
2020-05-20 03:08:04 +00:00
```plaintext
2019-05-27 03:59:59 +00:00
Error: remote error: tls: bad certificate
```
To avoid installation errors:
- Before starting the installation of applications, make sure that time is synchronized
2019-07-16 17:56:05 +00:00
between your GitLab server and your Kubernetes cluster.
2019-05-27 03:59:59 +00:00
- Ensure certificates are not out of sync. When installing applications, GitLab expects a new cluster with no previous installation of Helm.
You can confirm that the certificates match via `kubectl` :
2020-01-30 15:09:15 +00:00
```shell
2019-05-27 03:59:59 +00:00
kubectl get configmaps/values-content-configuration-ingress -n gitlab-managed-apps -o \
"jsonpath={.data['cert\.pem']}" | base64 -d > a.pem
kubectl get secrets/tiller-secret -n gitlab-managed-apps -o "jsonpath={.data['ca\.crt']}" | base64 -d > b.pem
diff a.pem b.pem
```
2020-04-09 15:09:29 +00:00
### Error installing managed apps on EKS cluster
If you're using a managed cluster on AWS EKS, and you are not able to install some of the managed
apps, consider checking the logs.
2020-07-27 21:09:16 +00:00
You can check the logs by running the following commands:
2020-04-09 15:09:29 +00:00
```shell
kubectl get pods --all-namespaces
kubectl get services --all-namespaces
```
If you are getting the `Failed to assign an IP address to container` error, it's probably due to the
instance type you've specified in the AWS configuration.
The number and size of nodes might not have enough IP addresses to run or install those pods.
For reference, all the AWS instance IP limits are found
[in this AWS repository on GitHub ](https://github.com/aws/amazon-vpc-cni-k8s/blob/master/pkg/awsutils/vpc_ip_resource_limit.go ) (search for `InstanceENIsAvailable` ).
2020-07-14 03:09:24 +00:00
### Unable to install Prometheus
Installing Prometheus is failing with the following error:
```shell
# kubectl -n gitlab-managed-apps logs install-prometheus
...
Error: Could not get apiVersions from Kubernetes: unable to retrieve the complete list of server APIs: admission.certmanager.k8s.io/v1beta1: the server is currently unable to handle the request
```
This is a bug that was introduced in Helm `2.15` and fixed in `3.0.2` . As a workaround, you'll need
to make sure that [`cert-manager` ](#cert-manager ) is installed successfully prior to installing Prometheus.