--- stage: Ecosystem group: Integrations info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments --- # API Docs **(FREE)** Use the GitLab APIs to automate GitLab. You can also use a partial [OpenAPI definition](https://gitlab.com/gitlab-org/gitlab/-/blob/master/doc/api/openapi/openapi.yaml), to test the API directly from the GitLab user interface. Contributions are welcome. ## REST API A REST API is available in GitLab. Usage instructions are below. For a list of the available resources and their endpoints, see [REST API resources](api_resources.md). For an introduction and basic steps, see [How to make GitLab API calls](https://www.youtube.com/watch?v=0LsMC3ZiXkA). ## SCIM API **(PREMIUM SAAS)** GitLab provides an [SCIM API](scim.md) that both implements [the RFC7644 protocol](https://tools.ietf.org/html/rfc7644) and provides the `/Users` endpoint. The base URL is `/api/scim/v2/groups/:group_path/Users/`. ## GraphQL API A [GraphQL API](graphql/index.md) is available in GitLab. With GraphQL, you can make an API request for only what you need, and it's versioned by default. GraphQL co-exists with the current v4 REST API. If we have a v5 API, this should be a compatibility layer on top of GraphQL. There were some patenting and licensing concerns with GraphQL. However, these have been resolved to our satisfaction. The reference implementations were re-licensed under MIT, and the OWF license used for the GraphQL specification. When GraphQL is fully implemented, GitLab: - Can delete controller-specific endpoints. - Will no longer maintain two different APIs. ## Compatibility guidelines The HTTP API is versioned with a single number, which is currently `4`. This number symbolizes the major version number, as described by [SemVer](https://semver.org/). Because of this, backward-incompatible changes require this version number to change. The minor version isn't explicit, which allows for a stable API endpoint. New features can be added to the API in the same version number. New features and bug fixes are released in tandem with GitLab. Apart from incidental patch and security releases, GitLab is released on the 22nd of each month. Major API version changes, and removal of entire API versions, are done in tandem with major GitLab releases. All deprecations and changes between versions are in the documentation. For the changes between v3 and v4, see the [v3 to v4 documentation](v3_to_v4.md). ### Current status Only API version v4 is available. Version v3 was removed in [GitLab 11.0](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/36819). ## How to use the API API requests must include both `api` and the API version. The API version is defined in [`lib/api.rb`](https://gitlab.com/gitlab-org/gitlab/-/tree/master/lib/api/api.rb). For example, the root of the v4 API is at `/api/v4`. ### Valid API request If you have a GitLab instance at `gitlab.example.com`: ```shell curl "https://gitlab.example.com/api/v4/projects" ``` The API uses JSON to serialize data. You don't need to specify `.json` at the end of the API URL. ### API request to expose HTTP response headers If you want to expose HTTP response headers, use the `--include` option: ```shell curl --include "https://gitlab.example.com/api/v4/projects" HTTP/2 200 ... ``` This request can help you investigate an unexpected response. ### API request that includes the exit code If you want to expose the HTTP exit code, include the `--fail` option: ```shell curl --fail "https://gitlab.example.com/api/v4/does-not-exist" curl: (22) The requested URL returned error: 404 ``` The HTTP exit code can help you diagnose the success or failure of your REST request. ## Authentication Most API requests require authentication, or only return public data when authentication isn't provided. When authentication is not required, the documentation for each endpoint specifies this. For example, the [`/projects/:id` endpoint](projects.md#get-single-project) does not require authentication. There are several ways you can authenticate with the GitLab API: - [OAuth2 tokens](#oauth2-tokens) - [Personal access tokens](../user/profile/personal_access_tokens.md) - [Project access tokens](../user/project/settings/project_access_tokens.md) - [Session cookie](#session-cookie) - [GitLab CI/CD job token](../ci/jobs/ci_job_token.md) **(Specific endpoints only)** Project access tokens are supported by: - Self-managed GitLab Free and higher. - GitLab SaaS Premium and higher. If you are an administrator, you or your application can authenticate as a specific user. To do so, use: - [Impersonation tokens](#impersonation-tokens) - [Sudo](#sudo) If authentication information is not valid or is missing, GitLab returns an error message with a status code of `401`: ```json { "message": "401 Unauthorized" } ``` ### OAuth2 tokens You can use an [OAuth2 token](oauth2.md) to authenticate with the API by passing it in either the `access_token` parameter or the `Authorization` header. Example of using the OAuth2 token in a parameter: ```shell curl "https://gitlab.example.com/api/v4/projects?access_token=OAUTH-TOKEN" ``` Example of using the OAuth2 token in a header: ```shell curl --header "Authorization: Bearer OAUTH-TOKEN" "https://gitlab.example.com/api/v4/projects" ``` Read more about [GitLab as an OAuth2 provider](oauth2.md). NOTE: We recommend OAuth access tokens have an expiration. You can use the `refresh_token` parameter to refresh tokens. Integrations may need to be updated to use refresh tokens prior to expiration, which is based on the [expires_in](https://datatracker.ietf.org/doc/html/rfc6749#appendix-A.14) property in the token endpoint response. See [OAuth2 token](oauth2.md) documentation for examples requesting a new access token using a refresh token. A default refresh setting of two hours is tracked in [this issue](https://gitlab.com/gitlab-org/gitlab/-/issues/336598). ### Personal/project access tokens You can use access tokens to authenticate with the API by passing it in either the `private_token` parameter or the `PRIVATE-TOKEN` header. Example of using the personal or project access token in a parameter: ```shell curl "https://gitlab.example.com/api/v4/projects?private_token=" ``` Example of using the personal or project access token in a header: ```shell curl --header "PRIVATE-TOKEN: " "https://gitlab.example.com/api/v4/projects" ``` You can also use personal or project access tokens with OAuth-compliant headers: ```shell curl --header "Authorization: Bearer " "https://gitlab.example.com/api/v4/projects" ``` ### Session cookie Signing in to the main GitLab application sets a `_gitlab_session` cookie. The API uses this cookie for authentication if it's present. Using the API to generate a new session cookie isn't supported. The primary user of this authentication method is the web frontend of GitLab itself. The web frontend can use the API as the authenticated user to get a list of projects without explicitly passing an access token. ### Impersonation tokens Impersonation tokens are a type of [personal access token](../user/profile/personal_access_tokens.md). They can be created only by an administrator, and are used to authenticate with the API as a specific user. Use impersonation tokens an alternative to: - The user's password or one of their personal access tokens. - The [Sudo](#sudo) feature. The user's or administrator's password or token may not be known, or may change over time. For more information, see the [users API](users.md#create-an-impersonation-token) documentation. Impersonation tokens are used exactly like regular personal access tokens, and can be passed in either the `private_token` parameter or the `PRIVATE-TOKEN` header. #### Disable impersonation > [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/40385) in GitLab 11.6. By default, impersonation is enabled. To disable impersonation: **For Omnibus installations** 1. Edit the `/etc/gitlab/gitlab.rb` file: ```ruby gitlab_rails['impersonation_enabled'] = false ``` 1. Save the file, and then [reconfigure](../administration/restart_gitlab.md#omnibus-gitlab-reconfigure) GitLab for the changes to take effect. To re-enable impersonation, remove this configuration, and then reconfigure GitLab. **For installations from source** 1. Edit the `config/gitlab.yml` file: ```yaml gitlab: impersonation_enabled: false ``` 1. Save the file, and then [restart](../administration/restart_gitlab.md#installations-from-source) GitLab for the changes to take effect. To re-enable impersonation, remove this configuration, and then restart GitLab. ### Sudo All API requests support performing an API request as if you were another user, provided you're authenticated as an administrator with an OAuth or personal access token that has the `sudo` scope. The API requests are executed with the permissions of the impersonated user. As an [administrator](../user/permissions.md), pass the `sudo` parameter either by using query string or a header with an ID or username (case insensitive) of the user you want to perform the operation as. If passed as a header, the header name must be `Sudo`. If a non administrative access token is provided, GitLab returns an error message with a status code of `403`: ```json { "message": "403 Forbidden - Must be admin to use sudo" } ``` If an access token without the `sudo` scope is provided, an error message is be returned with a status code of `403`: ```json { "error": "insufficient_scope", "error_description": "The request requires higher privileges than provided by the access token.", "scope": "sudo" } ``` If the sudo user ID or username cannot be found, an error message is returned with a status code of `404`: ```json { "message": "404 User with ID or username '123' Not Found" } ``` Example of a valid API request and a request using cURL with sudo request, providing a username: ```plaintext GET /projects?private_token=&sudo=username ``` ```shell curl --header "PRIVATE-TOKEN: " --header "Sudo: username" "https://gitlab.example.com/api/v4/projects" ``` Example of a valid API request and a request using cURL with sudo request, providing an ID: ```plaintext GET /projects?private_token=&sudo=23 ``` ```shell curl --header "PRIVATE-TOKEN: " --header "Sudo: 23" "https://gitlab.example.com/api/v4/projects" ``` ## Status codes The API is designed to return different status codes according to context and action. This way, if a request results in an error, you can get insight into what went wrong. The following table gives an overview of how the API functions generally behave. | Request type | Description | |---------------|-------------| | `GET` | Access one or more resources and return the result as JSON. | | `POST` | Return `201 Created` if the resource is successfully created and return the newly created resource as JSON. | | `GET` / `PUT` | Return `200 OK` if the resource is accessed or modified successfully. The (modified) result is returned as JSON. | | `DELETE` | Returns `204 No Content` if the resource was deleted successfully. | The following table shows the possible return codes for API requests. | Return values | Description | |--------------------------|-------------| | `200 OK` | The `GET`, `PUT` or `DELETE` request was successful, and the resource(s) itself is returned as JSON. | | `204 No Content` | The server has successfully fulfilled the request, and there is no additional content to send in the response payload body. | | `201 Created` | The `POST` request was successful, and the resource is returned as JSON. | | `304 Not Modified` | The resource hasn't been modified since the last request. | | `400 Bad Request` | A required attribute of the API request is missing. For example, the title of an issue is not given. | | `401 Unauthorized` | The user isn't authenticated. A valid [user token](#authentication) is necessary. | | `403 Forbidden` | The request isn't allowed. For example, the user isn't allowed to delete a project. | | `404 Not Found` | A resource couldn't be accessed. For example, an ID for a resource couldn't be found. | | `405 Method Not Allowed` | The request isn't supported. | | `409 Conflict` | A conflicting resource already exists. For example, creating a project with a name that already exists. | | `412` | The request was denied. This can happen if the `If-Unmodified-Since` header is provided when trying to delete a resource, which was modified in between. | | `422 Unprocessable` | The entity couldn't be processed. | | `429 Too Many Requests` | The user exceeded the [application rate limits](../administration/instance_limits.md#rate-limits). | | `500 Server Error` | While handling the request, something went wrong on the server. | ## Pagination GitLab supports the following pagination methods: - Offset-based pagination. This is the default method and is available on all endpoints. - Keyset-based pagination. Added to selected endpoints but being [progressively rolled out](https://gitlab.com/groups/gitlab-org/-/epics/2039). For large collections, for performance reasons we recommend keyset pagination (when available) instead of offset pagination. ### Offset-based pagination Sometimes, the returned result spans many pages. When listing resources, you can pass the following parameters: | Parameter | Description | |------------|-------------| | `page` | Page number (default: `1`). | | `per_page` | Number of items to list per page (default: `20`, max: `100`). | In the following example, we list 50 [namespaces](namespaces.md) per page: ```shell curl --request GET --header "PRIVATE-TOKEN: " "https://gitlab.example.com/api/v4/namespaces?per_page=50" ``` #### Pagination `Link` header [`Link` headers](https://www.w3.org/wiki/LinkHeader) are returned with each response. They have `rel` set to `prev`, `next`, `first`, or `last` and contain the relevant URL. Be sure to use these links instead of generating your own URLs. For GitLab.com users, [some pagination headers may not be returned](../user/gitlab_com/index.md#pagination-response-headers). In the following cURL example, we limit the output to three items per page (`per_page=3`) and we request the second page (`page=2`) of [comments](notes.md) of the issue with ID `8` which belongs to the project with ID `9`: ```shell curl --head --header "PRIVATE-TOKEN: " "https://gitlab.example.com/api/v4/projects/9/issues/8/notes?per_page=3&page=2" ``` The response is: ```http HTTP/2 200 OK cache-control: no-cache content-length: 1103 content-type: application/json date: Mon, 18 Jan 2016 09:43:18 GMT link: ; rel="prev", ; rel="next", ; rel="first", ; rel="last" status: 200 OK vary: Origin x-next-page: 3 x-page: 2 x-per-page: 3 x-prev-page: 1 x-request-id: 732ad4ee-9870-4866-a199-a9db0cde3c86 x-runtime: 0.108688 x-total: 8 x-total-pages: 3 ``` #### Other pagination headers GitLab also returns the following additional pagination headers: | Header | Description | |-----------------|-------------| | `x-next-page` | The index of the next page. | | `x-page` | The index of the current page (starting at 1). | | `x-per-page` | The number of items per page. | | `X-prev-page` | The index of the previous page. | | `x-total` | The total number of items. | | `x-total-pages` | The total number of pages. | For GitLab.com users, [some pagination headers may not be returned](../user/gitlab_com/index.md#pagination-response-headers). ### Keyset-based pagination Keyset-pagination allows for more efficient retrieval of pages and - in contrast to offset-based pagination - runtime is independent of the size of the collection. This method is controlled by the following parameters: | Parameter | Description | |--------------| ------------| | `pagination` | `keyset` (to enable keyset pagination). | | `per_page` | Number of items to list per page (default: `20`, max: `100`). | In the following example, we list 50 [projects](projects.md) per page, ordered by `id` ascending. ```shell curl --request GET --header "PRIVATE-TOKEN: " "https://gitlab.example.com/api/v4/projects?pagination=keyset&per_page=50&order_by=id&sort=asc" ``` The response header includes a link to the next page. For example: ```http HTTP/1.1 200 OK ... Link: ; rel="next" Status: 200 OK ... ``` The link to the next page contains an additional filter `id_after=42` that excludes already-retrieved records. As another example, the following request lists 50 [groups](groups.md) per page ordered by `name` ascending using keyset pagination: ```shell curl --request GET --header "PRIVATE-TOKEN: " "https://gitlab.example.com/api/v4/groups?pagination=keyset&per_page=50&order_by=name&sort=asc" ``` The response header includes a link to the next page: ```http HTTP/1.1 200 OK ... Link: ; rel="next" Status: 200 OK ... ``` The link to the next page contains an additional filter `cursor=eyJuYW1lIjoiRmxpZ2h0anMiLCJpZCI6IjI2IiwiX2tkIjoibiJ9` that excludes already-retrieved records. The type of filter depends on the `order_by` option used, and we can have more than one additional filter. WARNING: The `Links` header was removed in GitLab 14.0 to be aligned with the [W3C `Link` specification](https://www.w3.org/wiki/LinkHeader). The `Link` header was [added in GitLab 13.1](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/33714) and should be used instead. When the end of the collection is reached and there are no additional records to retrieve, the `Link` header is absent and the resulting array is empty. We recommend using only the given link to retrieve the next page instead of building your own URL. Apart from the headers shown, we don't expose additional pagination headers. Keyset-based pagination is supported only for selected resources and ordering options: | Resource | Options | Availability | |:-------------------------|:---------------------------------|:----------------------------------------| | [Projects](projects.md) | `order_by=id` only | Authenticated and unauthenticated users | | [Groups](groups.md) | `order_by=name`, `sort=asc` only | Unauthenticated users only | ## Path parameters If an endpoint has path parameters, the documentation displays them with a preceding colon. For example: ```plaintext DELETE /projects/:id/share/:group_id ``` The `:id` path parameter needs to be replaced with the project ID, and the `:group_id` needs to be replaced with the ID of the group. The colons `:` shouldn't be included. The resulting cURL request for a project with ID `5` and a group ID of `17` is then: ```shell curl --request DELETE --header "PRIVATE-TOKEN: " "https://gitlab.example.com/api/v4/projects/5/share/17" ``` Path parameters that are required to be URL-encoded must be followed. If not, it doesn't match an API endpoint and responds with a 404. If there's something in front of the API (for example, Apache), ensure that it doesn't decode the URL-encoded path parameters. ## Namespaced path encoding If using namespaced API requests, make sure that the `NAMESPACE/PROJECT_PATH` is URL-encoded. For example, `/` is represented by `%2F`: ```plaintext GET /api/v4/projects/diaspora%2Fdiaspora ``` A project's _path_ isn't necessarily the same as its _name_. A project's path is found in the project's URL or in the project's settings, under **General > Advanced > Change path**. ## File path, branches, and tags name encoding If a file path, branch or tag contains a `/`, make sure it is URL-encoded. For example, `/` is represented by `%2F`: ```plaintext GET /api/v4/projects/1/repository/files/src%2FREADME.md?ref=master GET /api/v4/projects/1/branches/my%2Fbranch/commits GET /api/v4/projects/1/repository/tags/my%2Ftag ``` ## Request Payload API Requests can use parameters sent as [query strings](https://en.wikipedia.org/wiki/Query_string) or as a [payload body](https://tools.ietf.org/html/draft-ietf-httpbis-p3-payload-14#section-3.2). GET requests usually send a query string, while PUT or POST requests usually send the payload body: - Query string: ```shell curl --request POST "https://gitlab/api/v4/projects?name=&description=" ``` - Request payload (JSON): ```shell curl --request POST --header "Content-Type: application/json" \ --data '{"name":"", "description":""}' "https://gitlab/api/v4/projects" ``` URL encoded query strings have a length limitation. Requests that are too large result in a `414 Request-URI Too Large` error message. This can be resolved by using a payload body instead. ## Encoding API parameters of `array` and `hash` types You can request the API with `array` and `hash` types parameters: ### `array` `import_sources` is a parameter of type `array`: ```shell curl --request POST --header "PRIVATE-TOKEN: " \ -d "import_sources[]=github" \ -d "import_sources[]=bitbucket" \ "https://gitlab.example.com/api/v4/some_endpoint" ``` ### `hash` `override_params` is a parameter of type `hash`: ```shell curl --request POST --header "PRIVATE-TOKEN: " \ --form "namespace=email" \ --form "path=impapi" \ --form "file=@/path/to/somefile.txt" \ --form "override_params[visibility]=private" \ --form "override_params[some_other_param]=some_value" \ "https://gitlab.example.com/api/v4/projects/import" ``` ### Array of hashes `variables` is a parameter of type `array` containing hash key/value pairs `[{ 'key': 'UPLOAD_TO_S3', 'value': 'true' }]`: ```shell curl --globoff --request POST --header "PRIVATE-TOKEN: " \ "https://gitlab.example.com/api/v4/projects/169/pipeline?ref=master&variables[0][key]=VAR1&variables[0][value]=hello&variables[1][key]=VAR2&variables[1][value]=world" curl --request POST --header "PRIVATE-TOKEN: " \ --header "Content-Type: application/json" \ --data '{ "ref": "master", "variables": [ {"key": "VAR1", "value": "hello"}, {"key": "VAR2", "value": "world"} ] }' \ "https://gitlab.example.com/api/v4/projects/169/pipeline" ``` ## `id` vs `iid` Some resources have two similarly-named fields. For example, [issues](issues.md), [merge requests](merge_requests.md), and [project milestones](merge_requests.md). The fields are: - `id`: ID that is unique across all projects. - `iid`: Additional, internal ID (displayed in the web UI) that's unique in the scope of a single project. If a resource has both the `iid` field and the `id` field, the `iid` field is usually used instead of `id` to fetch the resource. For example, suppose a project with `id: 42` has an issue with `id: 46` and `iid: 5`. In this case: - A valid API request to retrieve the issue is `GET /projects/42/issues/5`. - An invalid API request to retrieve the issue is `GET /projects/42/issues/46`. Not all resources with the `iid` field are fetched by `iid`. For guidance regarding which field to use, see the documentation for the specific resource. ## Data validation and error reporting When working with the API you may encounter validation errors, in which case the API returns an HTTP `400` error. Such errors appear in the following cases: - A required attribute of the API request is missing (for example, the title of an issue isn't given). - An attribute did not pass the validation (for example, the user bio is too long). When an attribute is missing, you receive something like: ```http HTTP/1.1 400 Bad Request Content-Type: application/json { "message":"400 (Bad request) \"title\" not given" } ``` When a validation error occurs, error messages are different. They hold all details of validation errors: ```http HTTP/1.1 400 Bad Request Content-Type: application/json { "message": { "bio": [ "is too long (maximum is 255 characters)" ] } } ``` This makes error messages more machine-readable. The format can be described as follows: ```json { "message": { "": [ "", "", ... ], "": { "": [ "", "", ... ], } } } ``` ## Unknown route When you attempt to access an API URL that doesn't exist, you receive a 404 Not Found message. ```http HTTP/1.1 404 Not Found Content-Type: application/json { "error": "404 Not Found" } ``` ## Encoding `+` in ISO 8601 dates If you need to include a `+` in a query parameter, you may need to use `%2B` instead, due to a [W3 recommendation](http://www.w3.org/Addressing/URL/4_URI_Recommentations.html) that causes a `+` to be interpreted as a space. For example, in an ISO 8601 date, you may want to include a specific time in ISO 8601 format, such as: ```plaintext 2017-10-17T23:11:13.000+05:30 ``` The correct encoding for the query parameter would be: ```plaintext 2017-10-17T23:11:13.000%2B05:30 ``` ## Clients There are many unofficial GitLab API Clients for most of the popular programming languages. For a complete list, visit the [GitLab website](https://about.gitlab.com/partners/technology-partners/#api-clients). ## Rate limits For administrator documentation on rate limit settings, see [Rate limits](../security/rate_limits.md). To find the settings that are specifically used by GitLab.com, see [GitLab.com-specific rate limits](../user/gitlab_com/index.md#gitlabcom-specific-rate-limits). ## Content type The GitLab API supports the `application/json` content type by default, though some API endpoints also support `text/plain`. In [GitLab 13.10 and later](https://gitlab.com/gitlab-org/gitlab/-/issues/250342), API endpoints do not support `text/plain` by default, unless it's explicitly documented.