--- stage: Create group: Source Code info: "To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#designated-technical-writers" type: reference, howto --- # GitLab Markdown This Markdown guide is **valid only for GitLab's internal Markdown rendering system for entries and files**. It is **not** valid for the [GitLab documentation website](https://docs.gitlab.com) or [GitLab's main website](https://about.gitlab.com), as they both use [Kramdown](https://kramdown.gettalong.org) as their Markdown engine. The documentation website uses an extended Kramdown gem, [GitLab Kramdown](https://gitlab.com/gitlab-org/gitlab_kramdown). Consult the [GitLab Kramdown Guide](https://about.gitlab.com/handbook/markdown-guide/) for a complete Kramdown reference. NOTE: **Note:** We encourage you to view this document as [rendered by GitLab itself](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md). ## GitLab Flavored Markdown (GFM) GitLab uses "GitLab Flavored Markdown" (GFM). It extends the [CommonMark specification](https://spec.commonmark.org/current/) (which is based on standard Markdown) in several ways to add additional useful functionality. It was inspired by [GitHub Flavored Markdown](https://docs.github.com/en/github/writing-on-github/basic-writing-and-formatting-syntax). You can use GFM in the following areas: - Comments - Issues - Merge requests - Milestones - Snippets (the snippet must be named with a `.md` extension) - Wiki pages - Markdown documents inside repositories - Epics **(ULTIMATE)** You can also use other rich text files in GitLab. You might have to install a dependency to do so. Please see the [`gitlab-markup` gem project](https://gitlab.com/gitlab-org/gitlab-markup) for more information. ### Transition from Redcarpet to CommonMark Since 11.1, GitLab uses the [CommonMark Ruby Library](https://github.com/gjtorikian/commonmarker) for Markdown processing of all new issues, merge requests, comments, and other Markdown content in the GitLab system. Since 11.3, wiki pages and Markdown files (`*.md`) in repositories are also processed with CommonMark. As of 11.8, the [Redcarpet Ruby library](https://github.com/vmg/redcarpet) has been removed and all issues and comments, including those from pre-11.1, are now processed using the [CommonMark Ruby Library](https://github.com/gjtorikian/commonmarker). The documentation website had its [Markdown engine migrated from Redcarpet to Kramdown](https://gitlab.com/gitlab-org/gitlab-docs/-/merge_requests/108) in October 2018. You may have older issues, merge requests, or Markdown documents in your repository that were written using some of the nuances of GitLab's RedCarpet version of Markdown. Since CommonMark uses slightly stricter syntax, these documents might now appear a little differently since we have transitioned to CommonMark. For example, numbered lists with nested lists may render incorrectly: ```markdown 1. Chocolate - dark - milk ``` To correct their rendering, add a space to each nested item to align the `-` with the first character of the top list item (`C` in this case): ```markdown 1. Chocolate - dark - milk ``` 1. Chocolate - dark - milk We flag any significant differences between Redcarpet and CommonMark Markdown in this document. If you have a large volume of Markdown files, it can be tedious to determine if they display correctly or not. You can use the [diff_redcarpet_cmark](https://gitlab.com/digitalmoksha/diff_redcarpet_cmark) tool (not an officially supported product) to generate a list of files and the differences between how RedCarpet and CommonMark render the files. It gives an indication if anything needs to be changed - often nothing needs to change. ### GFM extends standard Markdown GitLab makes full use of the standard (CommonMark) formatting, but also includes additional functionality useful for GitLab users. It makes use of [new Markdown features](#new-gfm-markdown-extensions), not found in standard Markdown: - [Color "chips" written in HEX, RGB or HSL](#colors) - [Diagrams and flowcharts](#diagrams-and-flowcharts) - [Emoji](#emoji) - [Front matter](#front-matter) - [Inline diffs](#inline-diff) - [Math equations and symbols written in LaTeX](#math) - [Special GitLab references](#special-gitlab-references) - [Task Lists](#task-lists) - [Table of Contents](#table-of-contents) - [Wiki specific Markdown](#wiki-specific-markdown) It also has [extended Markdown features](#standard-markdown-and-extensions-in-gitlab), without changing how standard Markdown is used: | Standard Markdown | Extended Markdown in GitLab | | ------------------------------------- | ------------------------- | | [blockquotes](#blockquotes) | [multi-line blockquotes](#multiline-blockquote) | | [code blocks](#code-spans-and-blocks) | [colored code and syntax highlighting](#colored-code-and-syntax-highlighting) | | [emphasis](#emphasis) | [multiple underscores in words](#multiple-underscores-in-words-and-mid-word-emphasis) | [headers](#headers) | [linkable Header IDs](#header-ids-and-links) | | [images](#images) | [embedded videos](#videos) and [audio](#audio) | | [line breaks](#line-breaks) | [more line break control](#newlines) | | [links](#links) | [automatically linking URLs](#url-auto-linking) | ## New GFM Markdown extensions ### Colors If this section is not rendered correctly, [view it in GitLab](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#colors). It's possible to have color written in HEX, RGB, or HSL format rendered with a color indicator. Supported formats (named colors are not supported): - HEX: `` `#RGB[A]` `` or `` `#RRGGBB[AA]` `` - RGB: `` `RGB[A](R, G, B[, A])` `` - HSL: `` `HSL[A](H, S, L[, A])` `` Color written inside backticks is followed by a color "chip": ```markdown - `#F00` - `#F00A` - `#FF0000` - `#FF0000AA` - `RGB(0,255,0)` - `RGB(0%,100%,0%)` - `RGBA(0,255,0,0.3)` - `HSL(540,70%,50%)` - `HSLA(540,70%,50%,0.3)` ``` - `#F00` - `#F00A` - `#FF0000` - `#FF0000AA` - `RGB(0,255,0)` - `RGB(0%,100%,0%)` - `RGBA(0,255,0,0.3)` - `HSL(540,70%,50%)` - `HSLA(540,70%,50%,0.3)` ### Diagrams and flowcharts It's possible to generate diagrams and flowcharts from text in GitLab using [Mermaid](https://mermaidjs.github.io/) or [PlantUML](https://plantuml.com). #### Mermaid > [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/15107) in GitLab 10.3. Visit the [official page](https://mermaidjs.github.io/) for more details. If you're new to using Mermaid or need help identifying issues in your Mermaid code, the [Mermaid Live Editor](https://mermaid-js.github.io/mermaid-live-editor/) is a helpful tool for creating and resolving issues within Mermaid diagrams. In order to generate a diagram or flowchart, you should write your text inside the `mermaid` block: ````markdown ```mermaid graph TD; A-->B; A-->C; B-->D; C-->D; ``` ```` ```mermaid graph TD; A-->B; A-->C; B-->D; C-->D; ``` Subgraphs can also be included: ````markdown ```mermaid graph TB SubGraph1 --> SubGraph1Flow subgraph "SubGraph 1 Flow" SubGraph1Flow(SubNode 1) SubGraph1Flow -- Choice1 --> DoChoice1 SubGraph1Flow -- Choice2 --> DoChoice2 end subgraph "Main Graph" Node1[Node 1] --> Node2[Node 2] Node2 --> SubGraph1[Jump to SubGraph1] SubGraph1 --> FinalThing[Final Thing] end ``` ```` ```mermaid graph TB SubGraph1 --> SubGraph1Flow subgraph "SubGraph 1 Flow" SubGraph1Flow(SubNode 1) SubGraph1Flow -- Choice1 --> DoChoice1 SubGraph1Flow -- Choice2 --> DoChoice2 end subgraph "Main Graph" Node1[Node 1] --> Node2[Node 2] Node2 --> SubGraph1[Jump to SubGraph1] SubGraph1 --> FinalThing[Final Thing] end ``` #### PlantUML To make PlantUML available in GitLab, a GitLab administrator needs to enable it first. Read more in [PlantUML & GitLab](../administration/integration/plantuml.md). ### Emoji If this section is not rendered correctly, [view it in GitLab](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#emoji). ```markdown Sometimes you want to :monkey: around a bit and add some :star2: to your :speech_balloon:. Well we have a gift for you: :zap: You can use emoji anywhere GFM is supported. :v: You can use it to point out a :bug: or warn about :speak_no_evil: patches. And if someone improves your really :snail: code, send them some :birthday:. People will :heart: you for that. If you're new to this, don't be :fearful:. You can join the emoji :family:. All you need to do is to look up one of the supported codes. Consult the [Emoji Cheat Sheet](https://www.emojicopy.com) for a list of all supported emoji codes. :thumbsup: ``` Sometimes you want to around a bit and add some to your . Well we have a gift for you: You can use emoji anywhere GFM is supported. You can use it to point out a or warn about patches. And if someone improves your really code, send them some . People will you for that. If you're new to this, don't be . You can join the emoji . All you need to do is to look up one of the supported codes. Consult the [Emoji Cheat Sheet](https://www.webfx.com/tools/emoji-cheat-sheet/) for a list of all supported emoji codes. #### Emoji and your OS The emoji example above uses hard-coded images for this documentation. The emoji, when rendered within GitLab, may appear different depending on the OS and browser used. Most emoji are natively supported on macOS, Windows, iOS, Android, and fall back on image-based emoji where there is no support. On Linux, you can download [Noto Color Emoji](https://www.google.com/get/noto/help/emoji/) to get full native emoji support. Ubuntu 18.04 (like many modern Linux distributions) has this font installed by default. ### Front matter > [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/23331) in GitLab 11.6. Front matter is metadata included at the beginning of a Markdown document, preceding its content. This data can be used by static site generators such as [Jekyll](https://jekyllrb.com/docs/front-matter/), [Hugo](https://gohugo.io/content-management/front-matter/), and many other applications. When you view a Markdown file rendered by GitLab, any front matter is displayed as-is, in a box at the top of the document, before the rendered HTML content. To view an example, you can toggle between the source and rendered version of a [GitLab documentation file](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/README.md). In GitLab, front matter is only used in Markdown files and wiki pages, not the other places where Markdown formatting is supported. It must be at the very top of the document and must be between delimiters, as explained below. The following delimiters are supported: - YAML (`---`): ```yaml --- title: About Front Matter example: language: yaml --- ``` - TOML (`+++`): ```toml +++ title = "About Front Matter" [example] language = "toml" +++ ``` - JSON (`;;;`): ```json ;;; { "title": "About Front Matter" "example": { "language": "json" } } ;;; ``` Other languages are supported by adding a specifier to any of the existing delimiters. For example: ```php ---php $title = "About Front Matter"; $example = array( 'language' => "php", ); --- ``` ### Inline diff If this section is not rendered correctly, [view it in GitLab](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#inline-diff). With inline diff tags you can display `{+ additions +}` or `[- deletions -]`. The wrapping tags can be either curly braces or square brackets: ```markdown - {+ addition 1 +} - [+ addition 2 +] - {- deletion 3 -} - [- deletion 4 -] ``` ![Inline diff as rendered by GitLab's interface](img/inline_diff_01_v13_3.png) --- However, the wrapping tags can't be mixed: ```markdown - {+ addition +] - [+ addition +} - {- deletion -] - [- deletion -} ``` If your diff includes words in `` `code` `` font, make sure to escape each backtick `` ` `` with a backslash `\`, otherwise the diff highlight don't render correctly: ```markdown - {+ Just regular text +} - {+ Text with `backticks` inside +} - {+ Text with escaped \`backticks\` inside +} ``` ![Inline diff with mixed formatting, as rendered by GitLab's interface](img/inline_diff_02_v13_3.png) ### Math If this section is not rendered correctly, [view it in GitLab](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#math). It's possible to have math written with LaTeX syntax rendered using [KaTeX](https://github.com/KaTeX/KaTeX). Math written between dollar signs `$` are rendered inline with the text. Math written inside a [code block](#code-spans-and-blocks) with the language declared as `math`, are rendered on a separate line: ````markdown This math is inline $`a^2+b^2=c^2`$. This is on a separate line ```math a^2+b^2=c^2 ``` ```` This math is inline $`a^2+b^2=c^2`$. This is on a separate line ```math a^2+b^2=c^2 ``` _Be advised that KaTeX only supports a [subset](https://katex.org/docs/supported.html) of LaTeX._ This also works for the Asciidoctor `:stem: latexmath`. For details, see the [Asciidoctor user manual](https://asciidoctor.org/docs/user-manual/#activating-stem-support). ### Special GitLab references GFM recognizes special GitLab related references. For example, you can reference an issue, a commit, a team member, or even the whole team within a project. GFM turns that reference into a link so you can navigate between them. Additionally, GFM recognizes certain cross-project references and also has a shorthand version to reference other projects from the same namespace. GFM recognizes the following: | references | input | cross-project reference | shortcut within same namespace | | :------------------------------ | :------------------------- | :-------------------------------------- | :----------------------------- | | specific user | `@user_name` | | | | specific group | `@group_name` | | | | entire team | `@all` | | | | project | `namespace/project>` | | | | issue | ``#123`` | `namespace/project#123` | `project#123` | | merge request | `!123` | `namespace/project!123` | `project!123` | | snippet | `$123` | `namespace/project$123` | `project$123` | | epic **(ULTIMATE)** | `&123` | `group1/subgroup&123` | | | vulnerability **(ULTIMATE)** | `+123` | `namespace/project+123` | `project+123` | | label by ID | `~123` | `namespace/project~123` | `project~123` | | one-word label by name | `~bug` | `namespace/project~bug` | `project~bug` | | multi-word label by name | `~"feature request"` | `namespace/project~"feature request"` | `project~"feature request"` | | scoped label by name | `~"priority::high"` | `namespace/project~"priority::high"` | `project~"priority::high"` | | project milestone by ID | `%123` | `namespace/project%123` | `project%123` | | one-word milestone by name | `%v1.23` | `namespace/project%v1.23` | `project%v1.23` | | multi-word milestone by name | `%"release candidate"` | `namespace/project%"release candidate"` | `project%"release candidate"` | | specific commit | `9ba12248` | `namespace/project@9ba12248` | `project@9ba12248` | | commit range comparison | `9ba12248...b19a04f5` | `namespace/project@9ba12248...b19a04f5` | `project@9ba12248...b19a04f5` | | repository file references | `[README](doc/README)` | | | | repository file line references | `[README](doc/README#L13)` | | | | [alert](../operations/incident_management/alerts.md) | `^alert#123` | `namespace/project^alert#123` | `project^alert#123` | For example, referencing an issue by using `#123` will format the output as a link to issue number 123 with text `#123`. Likewise, a link to issue number 123 will be recognized and formatted with text `#123`. In addition to this, links to some objects are also recognized and formatted. Some examples of these are: - Comments on issues: `"https://gitlab.com/gitlab-org/gitlab/-/issues/1234#note_101075757"`, which are rendered as `#1234 (comment 101075757)` - The issues designs tab: `"https://gitlab.com/gitlab-org/gitlab/-/issues/1234/designs"`, which are rendered as `#1234 (designs)`. - Links to individual designs: `"https://gitlab.com/gitlab-org/gitlab/-/issues/1234/designs/layout.png"`, which are rendered as `#1234[layout.png]`. ### Task lists > If this is not rendered correctly, [view it in GitLab itself](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#task-lists). You can add task lists anywhere Markdown is supported, but you can only "click" to toggle the boxes if they are in issues, merge requests, or comments. In other places you must edit the Markdown manually to change the status by adding or removing an `x` within the square brackets. To create a task list, add a specially-formatted Markdown list. You can use either unordered or ordered lists: ```markdown - [x] Completed task - [ ] Incomplete task - [ ] Sub-task 1 - [x] Sub-task 2 - [ ] Sub-task 3 1. [x] Completed task 1. [ ] Incomplete task 1. [ ] Sub-task 1 1. [x] Sub-task 2 ``` ![A task list as rendered by GitLab's interface](img/completed_tasks_v13_3.png) ### Table of contents You can add a table of contents to a Markdown file, wiki page, or issue/merge request description, by adding the tag `[[_TOC_]]` on its own line. It appears as an unordered list that links to the various headers. ```markdown This is an intro sentence to my Wiki page. [[_TOC_]] ## My first heading First section content. ## My second heading Second section content. ``` ![Preview of an auto-generated TOC in a Wiki](img/markdown_toc_preview_v12_9.png) ### Wiki-specific Markdown The following examples show how links inside wikis behave. #### Wiki - direct page link A link which just includes the slug for a page points to that page, _at the base level of the wiki_. This snippet would link to a `documentation` page at the root of your wiki: ```markdown [Link to Documentation](documentation) ``` #### Wiki - direct file link Links with a file extension point to that file, _relative to the current page_. If the snippet below was placed on a page at `/documentation/related`, it would link to `/documentation/file.md`: ```markdown [Link to File](file.md) ``` #### Wiki - hierarchical link A link can be constructed relative to the current wiki page using `./`, `../`, and so on. If this snippet was placed on a page at `/documentation/main`, it would link to `/documentation/related`: ```markdown [Link to Related Page](./related) ``` If this snippet was placed on a page at `/documentation/related/content`, it would link to `/documentation/main`: ```markdown [Link to Related Page](../main) ``` If this snippet was placed on a page at `/documentation/main`, it would link to `/documentation/related.md`: ```markdown [Link to Related Page](./related.md) ``` If this snippet was placed on a page at `/documentation/related/content`, it would link to `/documentation/main.md`: ```markdown [Link to Related Page](../main.md) ``` #### Wiki - root link A link starting with a `/` is relative to the wiki root. This snippet links to `/documentation`: ```markdown [Link to Related Page](/documentation) ``` This snippet links to `/miscellaneous.md`: ```markdown [Link to Related Page](/miscellaneous.md) ``` ### Embedding metrics in GitLab Flavored Markdown Metric charts can be embedded within GitLab Flavored Markdown. See [Embedding Metrics within GitLab flavored Markdown](../operations/metrics/embed.md) for more details. ## Standard Markdown and extensions in GitLab All standard Markdown formatting should work as expected within GitLab. Some standard functionality is extended with additional features, without affecting the standard usage. If a functionality is extended, the new option is listed as a sub-section. ### Blockquotes Blockquotes are useful to highlight information, such as a side-note. It's generated by starting the lines of the blockquote with `>`: ```markdown > Blockquotes are very handy to emulate reply text. > This line is part of the same quote. Quote break. > This is a very long line that is still quoted properly when it wraps. Oh boy let's keep writing to make sure this is long enough to actually wrap for everyone. Oh, you can *put* **Markdown** into a blockquote. ``` > Blockquotes are very handy to emulate reply text. > This line is part of the same quote. Quote break. > This is a very long line that is still quoted properly when it wraps. Oh boy let's keep writing to make sure this is long enough to actually wrap for everyone. Oh, you can *put* **Markdown** into a blockquote. #### Multiline blockquote If this section is not rendered correctly, [view it in GitLab](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#multiline-blockquote). GFM extends the standard Markdown by also supporting multi-line blockquotes fenced by `>>>`: ```markdown >>> If you paste a message from somewhere else that spans multiple lines, you can quote that without having to manually prepend `>` to every line! >>> ``` >>> If you paste a message from somewhere else that spans multiple lines, you can quote that without having to manually prepend `>` to every line! >>> ### Code spans and blocks You can highlight anything that should be viewed as code and not simple text. Simple inline code is highlighted with single backticks `` ` ``: ```markdown Inline `code` has `back-ticks around` it. ``` Inline `code` has `back-ticks around` it. --- Similarly, a whole block of code can be fenced with triple backticks (```` ``` ````), triple tildes (`~~~`), or indented 4 or more spaces to achieve a similar effect for a larger body of code. ````markdown ```python def function(): #indenting works just fine in the fenced code block s = "Python code" print s ``` Using 4 spaces is like using 3-backtick fences. ```` ```plaintext ~~~ Tildes are OK too. ~~~ ``` The three examples above render as: ```python def function(): #indenting works just fine in the fenced code block s = "Python code" print s ``` ```plaintext Using 4 spaces is like using 3-backtick fences. ``` ```plaintext Tildes are OK too. ``` #### Colored code and syntax highlighting If this section is not rendered correctly, [view it in GitLab](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#colored-code-and-syntax-highlighting). GitLab uses the [Rouge Ruby library](http://rouge.jneen.net/) for more colorful syntax highlighting in code blocks. For a list of supported languages visit the [Rouge project wiki](https://github.com/rouge-ruby/rouge/wiki/List-of-supported-languages-and-lexers). Syntax highlighting is only supported in code blocks, so it's not possible to highlight code when it's inline. Blocks of code are fenced by lines with three back-ticks (```` ``` ````) or three tildes (`~~~`), and have the language identified at the end of the first fence: ````markdown ```javascript var s = "JavaScript syntax highlighting"; alert(s); ``` ```python def function(): #indenting works just fine in the fenced code block s = "Python syntax highlighting" print s ``` ```ruby require 'redcarpet' markdown = Redcarpet.new("Hello World!") puts markdown.to_html ``` ``` No language indicated, so no syntax highlighting. s = "There is no highlighting for this." But let's throw in a tag. ``` ```` The four examples above render as: ```javascript var s = "JavaScript syntax highlighting"; alert(s); ``` ```python def function(): #indenting works just fine in the fenced code block s = "Python syntax highlighting" print s ``` ```ruby require 'redcarpet' markdown = Redcarpet.new("Hello World!") puts markdown.to_html ``` ```plaintext No language indicated, so no syntax highlighting. s = "There is no highlighting for this." But let's throw in a tag. ``` ### Emphasis There are multiple ways to emphasize text in Markdown. You can italicize, bold, strikethrough, as well as combine these emphasis styles together. Examples: ```markdown Emphasis, aka italics, with *asterisks* or _underscores_. Strong emphasis, aka bold, with double **asterisks** or __underscores__. Combined emphasis with **asterisks and _underscores_**. Strikethrough uses two tildes. ~~Scratch this.~~ ``` Emphasis, aka italics, with *asterisks* or _underscores_. Strong emphasis, aka bold, with double **asterisks** or __underscores__. Combined emphasis with **asterisks and _underscores_**. Strikethrough uses two tildes. ~~Scratch this.~~ NOTE: **Note:** Strikethrough is not part of the core Markdown standard, but is part of GFM. #### Multiple underscores in words and mid-word emphasis If this section is not rendered correctly, [view it in GitLab](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#multiple-underscores-in-words). It's not usually useful to italicize just _part_ of a word, especially when you're dealing with code and names that often appear with multiple underscores. As a result, GFM extends the standard Markdown standard by ignoring multiple underlines in words, to allow better rendering of Markdown documents discussing code: ```markdown perform_complicated_task do_this_and_do_that_and_another_thing but_emphasis is_desired _here_ ``` perform_complicated_task do_this_and_do_that_and_another_thing but_emphasis is_desired _here_ --- If you wish to emphasize only a part of a word, it can still be done with asterisks: ```markdown perform*complicated*task do*this*and*do*that*and*another thing ``` perform*complicated*task do*this*and*do*that*and*another thing ### Footnotes Footnotes add a link to a note that are rendered at the end of a Markdown file. To make a footnote, you need both a reference tag and a separate line (anywhere in the file) with the note content. Regardless of the tag names, the relative order of the reference tags determines the rendered numbering. Reference tags can use letters and other characters. Avoid using lowercase `w` or an underscore (`_`) in footnote tag names until [this bug](https://gitlab.com/gitlab-org/gitlab/-/issues/24423) is resolved.
A footnote reference tag looks like this: [^1]

This reference tag is a mix of letters and numbers. [^footnote-42]

[^1]: This is the text inside a footnote.

[^footnote-42]: This is another footnote.
A footnote reference tag looks like this:[^1] This reference tag is a mix of letters and numbers.[^footnote-42] [^1]: This is the text inside a footnote. [^footnote-42]: This is another footnote. ### Headers ```markdown # H1 ## H2 ### H3 #### H4 ##### H5 ###### H6 Alternatively, for H1 and H2, an underline-ish style: Alt-H1 ====== Alt-H2 ------ ``` #### Header IDs and links GFM extends the standard Markdown standard so that all Markdown-rendered headers automatically get IDs, which can be linked to, except in comments. On hover, a link to those IDs becomes visible to make it easier to copy the link to the header to use it somewhere else. The IDs are generated from the content of the header according to the following rules: 1. All text is converted to lowercase. 1. All non-word text (such as punctuation or HTML) is removed. 1. All spaces are converted to hyphens. 1. Two or more hyphens in a row are converted to one. 1. If a header with the same ID has already been generated, a unique incrementing number is appended, starting at 1. Example: ```markdown # This header has spaces in it ## This header has a :thumbsup: in it # This header has Unicode in it: 한글 ## This header has spaces in it ### This header has spaces in it ## This header has 3.5 in it (and parentheses) ``` Would generate the following link IDs: 1. `this-header-has-spaces-in-it` 1. `this-header-has-a-in-it` 1. `this-header-has-unicode-in-it-한글` 1. `this-header-has-spaces-in-it-1` 1. `this-header-has-spaces-in-it-2` 1. `this-header-has-3-5-in-it-and-parentheses` Note that the emoji processing happens before the header IDs are generated, so the emoji is converted to an image which is then removed from the ID. ### Horizontal Rule It's very simple to create a horizontal rule, by using three or more hyphens, asterisks, or underscores: ```markdown Three or more hyphens, --- asterisks, *** or underscores ___ ``` ### Images Examples:
Inline-style (hover to see title text):

![alt text](img/markdown_logo.png "Title Text")

Reference-style (hover to see title text):

![alt text1][logo]

[logo]: img/markdown_logo.png "Title Text"
Inline-style (hover to see title text): ![alt text](img/markdown_logo.png "Title Text") Reference-style (hover to see title text): ![alt text](img/markdown_logo.png "Title Text") #### Videos If this section is not rendered correctly, [view it in GitLab](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#videos). Image tags that link to files with a video extension are automatically converted to a video player. The valid video extensions are `.mp4`, `.m4v`, `.mov`, `.webm`, and `.ogv`: ```markdown Here's a sample video: ![Sample Video](img/markdown_video.mp4) ``` Here's a sample video: ![Sample Video](img/markdown_video.mp4) #### Audio If this section is not rendered correctly, [view it in GitLab](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#audio). Similar to videos, link tags for files with an audio extension are automatically converted to an audio player. The valid audio extensions are `.mp3`, `.oga`, `.ogg`, `.spx`, and `.wav`: ```markdown Here's a sample audio clip: ![Sample Audio](img/markdown_audio.mp3) ``` Here's a sample audio clip: ![Sample Audio](img/markdown_audio.mp3) ### Inline HTML To see the Markdown rendered within HTML in the second example, [view it in GitLab](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#inline-html). You can also use raw HTML in your Markdown, and it usually works pretty well. See the documentation for HTML::Pipeline's [SanitizationFilter](https://github.com/jch/html-pipeline/blob/v2.12.3/lib/html/pipeline/sanitization_filter.rb#L42) class for the list of allowed HTML tags and attributes. In addition to the default `SanitizationFilter` allowlist, GitLab allows `span`, `abbr`, `details` and `summary` elements. ```html
Definition list
Is something people use sometimes.
Markdown in HTML
Does *not* work **very** well. HTML tags do work, in most cases.
```
Definition list
Is something people use sometimes.
Markdown in HTML
Does *not* work **very** well. HTML tags do work, in most cases.
--- It's still possible to use Markdown inside HTML tags, but only if the lines containing Markdown are separated into their own lines: ```html
Markdown in HTML
Does *not* work **very** well. HTML tags work, in most cases.
Markdown in HTML
Does *not* work **very** well. HTML tags work, in most cases.
```
Markdown in HTML
Does *not* work **very** well. HTML tags work, in most cases.
Markdown in HTML
Does not work very well. HTML tags work, in most cases.
#### Details and summary To see the Markdown rendered within HTML in the second example, [view it in GitLab](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#details-and-summary). Content can be collapsed using HTML's [`
`](https://developer.mozilla.org/en-US/docs/Web/HTML/Element/details) and [``](https://developer.mozilla.org/en-US/docs/Web/HTML/Element/summary) tags. This is especially useful for collapsing long logs so they take up less screen space. ```html

Click this to collapse/fold. These details remain hidden until expanded.
PASTE LOGS HERE

```

Click this to collapse/fold. These details remain hidden until expanded.
PASTE LOGS HERE

--- Markdown inside these tags is supported as well. TIP: **Tip:** If your Markdown isn't rendering correctly, try adding `{::options parse_block_html="true" /}` to the top of the page, and add `markdown="span"` to the opening summary tag like this: ``. Remember to leave a blank line after the `` tag and before the `
` tag, as shown in the example: ````html
Click this to collapse/fold. These details _remain_ **hidden** until expanded. ``` PASTE LOGS HERE ```
````
Click this to collapse/fold. These details remain hidden until expanded.
PASTE LOGS HERE
### Line breaks A line break is inserted (a new paragraph starts) if the previous text is ended with two newlines, like when you hit Enter twice in a row. If you only use one newline (hit Enter once), the next sentence remains part of the same paragraph. This is useful if you want to keep long lines from wrapping, and keep them editable: ```markdown Here's a line for us to start with. This longer line is separated from the one above by two newlines, so it is a *separate paragraph*. This line is also a separate paragraph, but... These lines are only separated by single newlines, so they *do not break* and just follow the previous lines in the *same paragraph*. ``` Here's a line for us to start with. This longer line is separated from the one above by two newlines, so it is a *separate paragraph*. This line is also a separate paragraph, but... These lines are only separated by single newlines, so they *do not break* and just follow the previous lines in the *same paragraph*. #### Newlines GFM adheres to the Markdown specification in how [paragraphs and line breaks are handled](https://spec.commonmark.org/current/). A paragraph is one or more consecutive lines of text, separated by one or more blank lines (two newlines at the end of the first paragraph), as [explained above](#line-breaks). If you need more control over line breaks or soft returns, you can add a single line break by ending a line with a backslash, or two or more spaces. Two newlines in a row create a new paragraph, with a blank line in between: ```markdown First paragraph. Another line in the same paragraph. A third line in the same paragraph, but this time ending with two spaces.{space}{space} A new line directly under the first paragraph. Second paragraph. Another line, this time ending with a backslash.\ A new line due to the previous backslash. ``` ### Links There are two ways to create links, inline-style and reference-style:
- This is an [inline-style link](https://www.google.com)
- This is a [link to a repository file in the same directory](index.md)
- This is a [relative link to a readme one directory higher](../README.md)
- This is a [link that also has title text](https://www.google.com "This link takes you to Google!")

Using header ID anchors:

- This links to [a section on a different Markdown page, using a "#" and the header ID](index.md#overview)
- This links to [a different section on the same page, using a "#" and the header ID](#header-ids-and-links)

Using references:

- This is a [reference-style link, see below][Arbitrary case-insensitive reference text]
- You can [use numbers for reference-style link definitions, see below][1]
- Or leave it empty and use the [link text itself][], see below.

Some text to show that the reference links can follow later.

[arbitrary case-insensitive reference text]: https://www.mozilla.org/en-US/
[1]: https://slashdot.org
[link text itself]: https://www.reddit.com
- This is an [inline-style link](https://www.google.com) - This is a [link to a repository file in the same directory](index.md) - This is a [relative link to a README one directory higher](../README.md) - This is a [link that also has title text](https://www.google.com "This link takes you to Google!") Using header ID anchors: - This links to [a section on a different Markdown page, using a "#" and the header ID](index.md#overview) - This links to [a different section on the same page, using a "#" and the header ID](#header-ids-and-links) Using references: - This is a [reference-style link, see below](https://www.mozilla.org/en-US/) - You can [use numbers for reference-style link definitions, see below](https://slashdot.org) - Or leave it empty and use the [link text itself](https://www.reddit.com), see below. Some text to show that the reference links can follow later. NOTE: **Note:** Relative links do not allow the referencing of project files in a wiki page, or a wiki page in a project file. The reason for this is that a wiki is always in a separate Git repository in GitLab. For example, `[I'm a reference-style link](style)` points the link to `wikis/style` only when the link is inside of a wiki Markdown file. #### URL auto-linking GFM auto-links almost any URL you put into your text: ```markdown - https://www.google.com - https://www.google.com - ftp://ftp.us.debian.org/debian/ - smb://foo/bar/baz - irc://irc.freenode.net/ - http://localhost:3000 ``` - - - - - - ### Lists Ordered and unordered lists can be created. For an ordered list, add the number you want the list to start with, like `1.`, followed by a space, at the start of each line for ordered lists. After the first number, it does not matter what number you use, ordered lists are numbered automatically by vertical order, so repeating `1.` for all items in the same list is common. If you start with a number other than `1.`, it uses that as the first number, and count up from there. Examples: ```markdown 1. First ordered list item 2. Another item - Unordered sub-list. 1. Actual numbers don't matter, just that it's a number 1. Ordered sub-list 1. Next ordered sub-list item 4. And another item. ``` 1. First ordered list item 1. Another item - Unordered sub-list. 1. Actual numbers don't matter, just that it's a number 1. Ordered sub-list 1. Next ordered sub-list item 1. And another item. For an unordered list, add a `-`, `*` or `+`, followed by a space, at the start of each line for unordered lists, but you should not use a mix of them. ```markdown Unordered lists can: - use - minuses They can also: * use * asterisks They can even: + use + pluses ``` Unordered lists can: - use - minuses They can also: - use - asterisks They can even: - use - pluses --- If a list item contains multiple paragraphs, each subsequent paragraph should be indented to the same level as the start of the list item text. Example: ```markdown 1. First ordered list item Second paragraph of first item. 1. Another item ``` 1. First ordered list item Second paragraph of first item. 1. Another item --- If the paragraph of the first item is not indented with the proper number of spaces, the paragraph appears outside the list, instead of properly indented under the list item. Example: ```markdown 1. First ordered list item Paragraph of first item. 1. Another item ``` 1. First ordered list item Paragraph of first item. 1. Another item ### Superscripts / Subscripts Currently, CommonMark and GFM don't support the superscript syntax ( `x^2` ) that Redcarpet does. You can use the standard HTML syntax for superscripts and subscripts: ```html The formula for water is H2O while the equation for the theory of relativity is E = mc2. ``` The formula for water is H2O while the equation for the theory of relativity is E = mc2. ### Tables Tables are not part of the core Markdown spec, but they are part of GFM. 1. The first line contains the headers, separated by "pipes" (`|`). 1. The second line separates the headers from the cells, and must contain three or more dashes. 1. The third, and any following lines, contain the cell values. - You **can't** have cells separated over many lines in the Markdown, they must be kept to single lines, but they can be very long. You can also include HTML `
` tags to force newlines if needed. - The cell sizes **don't** have to match each other. They are flexible, but must be separated by pipes (`|`). - You **can** have blank cells. Example: ```markdown | header 1 | header 2 | header 3 | | --- | ------ |----------| | cell 1 | cell 2 | cell 3 | | cell 4 | cell 5 is longer | cell 6 is much longer than the others, but that's ok. It eventually wraps the text when the cell is too large for the display size. | | cell 7 | | cell 9 | ``` | header 1 | header 2 | header 3 | | --- | ------ |----------| | cell 1 | cell 2 | cell 3 | | cell 4 | cell 5 is longer | cell 6 is much longer than the others, but that's ok. It eventually wraps the text when the cell is too large for the display size. | | cell 7 | | cell 9 | Additionally, you can choose the alignment of text within columns by adding colons (`:`) to the sides of the "dash" lines in the second row. This affects every cell in the column: ```markdown | Left Aligned | Centered | Right Aligned | Left Aligned | Centered | Right Aligned | | :--- | :---: | ---: | :----------- | :------: | ------------: | | Cell 1 | Cell 2 | Cell 3 | Cell 4 | Cell 5 | Cell 6 | | Cell 7 | Cell 8 | Cell 9 | Cell 10 | Cell 11 | Cell 12 | ``` | Left Aligned | Centered | Right Aligned | Left Aligned | Centered | Right Aligned | | :--- | :---: | ---: | :----------- | :------: | ------------: | | Cell 1 | Cell 2 | Cell 3 | Cell 4 | Cell 5 | Cell 6 | | Cell 7 | Cell 8 | Cell 9 | Cell 10 | Cell 11 | Cell 12 | [Within GitLab itself](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#tables), the headers are always left-aligned in Chrome and Firefox, and centered in Safari. You can use HTML formatting to adjust the rendering of tables. For example, you can use `
` tags to force a cell to have multiple lines: ```markdown | Name | Details | |------|---------| | Item1 | This is on one line | | Item2 | This item has:
- Multiple items
- That we want listed separately | ``` | Name | Details | |------|---------| | Item1 | This is on one line | | Item2 | This item has:
- Multiple items
- That we want listed separately | You can use HTML formatting within GitLab itself to add [task lists](#task-lists) with checkboxes, but they do not render properly on `docs.gitlab.com`: ```markdown | header 1 | header 2 | |----------|----------| | cell 1 | cell 2 | | cell 3 |
  • - [ ] Task one
  • - [ ] Task two
| ``` #### Copy from spreadsheet and paste in Markdown [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/27205) in GitLab 12.7. If you're working in spreadsheet software (for example, Microsoft Excel, Google Sheets, or Apple Numbers), you can copy from a spreadsheet, and GitLab pastes it as a Markdown table. For example, suppose you have the following spreadsheet: ![Copy from spreadsheet](img/markdown_copy_from_spreadsheet_v12_7.png) Select the cells and copy them to your clipboard. Open a GitLab Markdown entry and paste the spreadsheet: ![Paste to Markdown table](img/markdown_paste_table_v12_7.png) ## References - This document leveraged heavily from the [Markdown-Cheatsheet](https://github.com/adam-p/markdown-here/wiki/Markdown-Cheatsheet). - The original [Markdown Syntax Guide](https://daringfireball.net/projects/markdown/syntax) at Daring Fireball is an excellent resource for a detailed explanation of standard Markdown. - You can find the detailed specification for CommonMark in the [CommonMark Spec](https://spec.commonmark.org/current/). - The [CommonMark Dingus](https://spec.commonmark.org/dingus/) is a handy tool for testing CommonMark syntax.