---
stage: Systems
group: Distribution
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/product/ux/technical-writing/#assignments
---
# Reference architecture: up to 5,000 users **(PREMIUM SELF)**
This page describes GitLab reference architecture for up to 5,000 users. For a
full list of reference architectures, see
[Available reference architectures](index.md#available-reference-architectures).
NOTE:
This reference architecture is designed to help your organization achieve a
highly-available GitLab deployment. If you do not have the expertise or need to
maintain a highly-available environment, you can have a simpler and less
costly-to-operate environment by using the
[2,000-user reference architecture](2k_users.md).
> - **Supported users (approximate):** 5,000
> - **High Availability:** Yes ([Praefect](#configure-praefect-postgresql) needs a third-party PostgreSQL solution for HA)
> - **Estimated Costs:** [See cost table](index.md#cost-to-run)
> - **Cloud Native Hybrid Alternative:** [Yes](#cloud-native-hybrid-reference-architecture-with-helm-charts-alternative)
> - **Validation and test results:** The Quality Engineering team does [regular smoke and performance tests](index.md#validation-and-test-results) to ensure the reference architectures remain compliant
> - **Test requests per second (RPS) rates:** API: 100 RPS, Web: 10 RPS, Git (Pull): 10 RPS, Git (Push): 2 RPS
> - **[Latest Results](https://gitlab.com/gitlab-org/quality/performance/-/wikis/Benchmarks/Latest/5k)**
> - **Unsure which Reference Architecture to use?** [Go to this guide for more info](index.md#deciding-which-architecture-to-use).
| Service | Nodes | Configuration | GCP | AWS |
|-------------------------------------------|-------|-------------------------|-----------------|--------------|
| External load balancing node3 | 1 | 2 vCPU, 1.8 GB memory | `n1-highcpu-2` | `c5.large` |
| Redis2 | 3 | 2 vCPU, 7.5 GB memory | `n1-standard-2` | `m5.large` |
| Consul1 + Sentinel2 | 3 | 2 vCPU, 1.8 GB memory | `n1-highcpu-2` | `c5.large` |
| PostgreSQL1 | 3 | 4 vCPU, 15 GB memory | `n1-standard-4` | `m5.xlarge` |
| PgBouncer1 | 3 | 2 vCPU, 1.8 GB memory | `n1-highcpu-2` | `c5.large` |
| Internal load balancing node3 | 1 | 2 vCPU, 1.8 GB memory | `n1-highcpu-2` | `c5.large` |
| Gitaly5 | 3 | 8 vCPU, 30 GB memory | `n1-standard-8` | `m5.2xlarge` |
| Praefect5 | 3 | 2 vCPU, 1.8 GB memory | `n1-highcpu-2` | `c5.large` |
| Praefect PostgreSQL1 | 1+ | 2 vCPU, 1.8 GB memory | `n1-highcpu-2` | `c5.large` |
| Sidekiq | 4 | 2 vCPU, 7.5 GB memory | `n1-standard-2` | `m5.large` |
| GitLab Rails | 3 | 16 vCPU, 14.4 GB memory | `n1-highcpu-16` | `c5.4xlarge` |
| Monitoring node | 1 | 2 vCPU, 1.8 GB memory | `n1-highcpu-2` | `c5.large` |
| Object storage4 | - | - | - | - |
| NFS server (non-Gitaly) | 1 | 4 vCPU, 3.6 GB memory | `n1-highcpu-4` | `c5.xlarge` |
1. Can be optionally run on reputable third-party external PaaS PostgreSQL solutions. See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
- [Google Cloud SQL](https://cloud.google.com/sql/docs/postgres/high-availability#normal) and [Amazon RDS](https://aws.amazon.com/rds/) are known to work.
- [Google AlloyDB](https://cloud.google.com/alloydb) and [Amazon RDS Multi-AZ DB clusters](https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/multi-az-db-clusters-concepts.html) have not been tested and are not recommended. Both solutions are specifically not expected to work with GitLab Geo.
- [Amazon Aurora](https://aws.amazon.com/rds/aurora/) is **incompatible** with load balancing enabled by default in [14.4.0](../../update/index.md#1440).
- Consul is primarily used for Omnibus PostgreSQL high availability so can be ignored when using a PostgreSQL PaaS setup. However, Consul is also used optionally by Prometheus for Omnibus auto host discovery.
2. Can be optionally run on reputable third-party external PaaS Redis solutions. See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
- [Google Memorystore](https://cloud.google.com/memorystore) and [Amazon ElastiCache](https://aws.amazon.com/elasticache/) are known to work.
3. Can be optionally run on reputable third-party load balancing services (LB PaaS). See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
- [Google Cloud Load Balancing](https://cloud.google.com/load-balancing) and [Amazon Elastic Load Balancing](https://aws.amazon.com/elasticloadbalancing/) are known to work.
4. Should be run on reputable Cloud Provider or Self Managed solutions. More information can be found in the [Configure the object storage](#configure-the-object-storage) section.
5. Gitaly Cluster provides the benefits of fault tolerance, but comes with additional complexity of setup and management. Review the existing [technical limitations and considerations before deploying Gitaly Cluster](../gitaly/index.md#before-deploying-gitaly-cluster). If you want sharded Gitaly, use the same specs listed above for `Gitaly`.
NOTE:
For all PaaS solutions that involve configuring instances, it is strongly recommended to implement a minimum of three nodes in three different availability zones to align with resilient cloud architecture practices.
```plantuml
@startuml 5k
skinparam linetype ortho
card "**External Load Balancer**" as elb #6a9be7
card "**Internal Load Balancer**" as ilb #9370DB
together {
collections "**GitLab Rails** x3" as gitlab #32CD32
collections "**Sidekiq** x4" as sidekiq #ff8dd1
}
together {
card "**Prometheus + Grafana**" as monitor #7FFFD4
collections "**Consul** x3" as consul #e76a9b
}
card "Gitaly Cluster" as gitaly_cluster {
collections "**Praefect** x3" as praefect #FF8C00
collections "**Gitaly** x3" as gitaly #FF8C00
card "**Praefect PostgreSQL***\n//Non fault-tolerant//" as praefect_postgres #FF8C00
praefect -[#FF8C00]-> gitaly
praefect -[#FF8C00]> praefect_postgres
}
card "Database" as database {
collections "**PGBouncer** x3" as pgbouncer #4EA7FF
card "**PostgreSQL** //Primary//" as postgres_primary #4EA7FF
collections "**PostgreSQL** //Secondary// x2" as postgres_secondary #4EA7FF
pgbouncer -[#4EA7FF]-> postgres_primary
postgres_primary .[#4EA7FF]> postgres_secondary
}
card "Redis" as redis {
collections "**Redis** x3" as redis_nodes #FF6347
}
cloud "**Object Storage**" as object_storage #white
elb -[#6a9be7]-> gitlab
elb -[#6a9be7,norank]--> monitor
gitlab -[#32CD32,norank]--> ilb
gitlab -[#32CD32]r-> object_storage
gitlab -[#32CD32]----> redis
gitlab .[#32CD32]----> database
gitlab -[hidden]-> monitor
gitlab -[hidden]-> consul
sidekiq -[#ff8dd1,norank]--> ilb
sidekiq -[#ff8dd1]r-> object_storage
sidekiq -[#ff8dd1]----> redis
sidekiq .[#ff8dd1]----> database
sidekiq -[hidden]-> monitor
sidekiq -[hidden]-> consul
ilb -[#9370DB]--> gitaly_cluster
ilb -[#9370DB]--> database
ilb -[hidden]--> redis
ilb -[hidden]u-> consul
ilb -[hidden]u-> monitor
consul .[#e76a9b]u-> gitlab
consul .[#e76a9b]u-> sidekiq
consul .[#e76a9b]r-> monitor
consul .[#e76a9b]-> database
consul .[#e76a9b]-> gitaly_cluster
consul .[#e76a9b,norank]--> redis
monitor .[#7FFFD4]u-> gitlab
monitor .[#7FFFD4]u-> sidekiq
monitor .[#7FFFD4]> consul
monitor .[#7FFFD4]-> database
monitor .[#7FFFD4]-> gitaly_cluster
monitor .[#7FFFD4,norank]--> redis
monitor .[#7FFFD4]> ilb
monitor .[#7FFFD4,norank]u--> elb
@enduml
```
## Requirements
Before starting, you should take note of the following requirements / guidance for this reference architecture.
### Supported CPUs
This reference architecture was built and tested on Google Cloud Platform (GCP) using the
[Intel Xeon E5 v3 (Haswell)](https://cloud.google.com/compute/docs/cpu-platforms)
CPU platform as a baseline ([Sysbench benchmark](https://gitlab.com/gitlab-org/quality/performance/-/wikis/Reference-Architectures/GCP-CPU-Benchmarks)).
Newer, similarly sized CPUs are supported and may have improved performance as a result. For Omnibus environments, ARM-based equivalents are also supported.
NOTE:
Any "burstable" instance types are not recommended due to inconsistent performance.
### Supported infrastructure
As a general guidance, GitLab should run on most infrastructure such as reputable Cloud Providers (AWS, GCP) and their services, or self managed (ESXi) that meet both the specs detailed above, as well as any requirements in this section. However, this does not constitute a guarantee for every potential permutation.
See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
### Praefect PostgreSQL
It's worth noting that at this time [Praefect requires its own database server](../gitaly/praefect.md#postgresql) and
that to achieve full High Availability a third-party PostgreSQL database solution is required.
We hope to offer a built in solutions for these restrictions in the future but in the meantime a non HA PostgreSQL server
can be set up via Omnibus GitLab, which the above specs reflect. Refer to the following issues for more information: [`omnibus-gitlab#5919`](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/5919) & [`gitaly#3398`](https://gitlab.com/gitlab-org/gitaly/-/issues/3398).
## Setup components
To set up GitLab and its components to accommodate up to 5,000 users:
1. [Configure the external load balancer](#configure-the-external-load-balancer)
to handle the load balancing of the GitLab application services nodes.
1. [Configure the internal load balancer](#configure-the-internal-load-balancer).
to handle the load balancing of GitLab application internal connections.
1. [Configure Redis](#configure-redis).
1. [Configure Consul and Sentinel](#configure-consul-and-sentinel).
1. [Configure PostgreSQL](#configure-postgresql), the database for GitLab.
1. [Configure PgBouncer](#configure-pgbouncer).
1. [Configure Gitaly Cluster](#configure-gitaly-cluster),
provides access to the Git repositories.
1. [Configure Sidekiq](#configure-sidekiq).
1. [Configure the main GitLab Rails application](#configure-gitlab-rails)
to run Puma, Workhorse, GitLab Shell, and to serve all frontend
requests (which include UI, API, and Git over HTTP/SSH).
1. [Configure Prometheus](#configure-prometheus) to monitor your GitLab
environment.
1. [Configure the object storage](#configure-the-object-storage)
used for shared data objects.
1. [Configure NFS](#configure-nfs-optional) (optional, and not recommended)
to have shared disk storage service as an alternative to Gitaly or object
storage.
1. [Configure Advanced Search](#configure-advanced-search) (optional) for faster,
more advanced code search across your entire GitLab instance.
The servers start on the same 10.6.0.0/24 private network range, and can
connect to each other freely on these addresses.
The following list includes descriptions of each server and its assigned IP:
- `10.6.0.10`: External Load Balancer
- `10.6.0.61`: Redis Primary
- `10.6.0.62`: Redis Replica 1
- `10.6.0.63`: Redis Replica 2
- `10.6.0.11`: Consul/Sentinel 1
- `10.6.0.12`: Consul/Sentinel 2
- `10.6.0.13`: Consul/Sentinel 3
- `10.6.0.31`: PostgreSQL primary
- `10.6.0.32`: PostgreSQL secondary 1
- `10.6.0.33`: PostgreSQL secondary 2
- `10.6.0.21`: PgBouncer 1
- `10.6.0.22`: PgBouncer 2
- `10.6.0.23`: PgBouncer 3
- `10.6.0.20`: Internal Load Balancer
- `10.6.0.51`: Gitaly 1
- `10.6.0.52`: Gitaly 2
- `10.6.0.93`: Gitaly 3
- `10.6.0.131`: Praefect 1
- `10.6.0.132`: Praefect 2
- `10.6.0.133`: Praefect 3
- `10.6.0.141`: Praefect PostgreSQL 1 (non HA)
- `10.6.0.71`: Sidekiq 1
- `10.6.0.72`: Sidekiq 2
- `10.6.0.73`: Sidekiq 3
- `10.6.0.74`: Sidekiq 4
- `10.6.0.41`: GitLab application 1
- `10.6.0.42`: GitLab application 2
- `10.6.0.43`: GitLab application 3
- `10.6.0.81`: Prometheus
## Configure the external load balancer
In a multi-node GitLab configuration, you need a load balancer to route
traffic to the application servers. The specifics on which load balancer to use
or its exact configuration is beyond the scope of GitLab documentation. We assume
that if you're managing multi-node systems like GitLab, you already have a load
balancer of choice and that the routing methods used are distributing calls evenly
between all nodes. Some load balancer examples include HAProxy (open-source),
F5 Big-IP LTM, and Citrix Net Scaler. This documentation outline the ports and
protocols needed for use with GitLab.
This architecture has been tested and validated with [HAProxy](https://www.haproxy.org/)
as the load balancer. Although other load balancers with similar feature sets
could also be used, those load balancers have not been validated.
The next question is how you handle SSL in your environment.
There are several different options:
- [The application node terminates SSL](#application-node-terminates-ssl).
- [The load balancer terminates SSL without backend SSL](#load-balancer-terminates-ssl-without-backend-ssl)
and communication is not secure between the load balancer and the application node.
- [The load balancer terminates SSL with backend SSL](#load-balancer-terminates-ssl-with-backend-ssl)
and communication is *secure* between the load balancer and the application node.
### Application node terminates SSL
Configure your load balancer to pass connections on port 443 as `TCP` rather
than `HTTP(S)` protocol. This passes the connection to the application node's
NGINX service untouched. NGINX has the SSL certificate and listen on port 443.
See the [HTTPS documentation](https://docs.gitlab.com/omnibus/settings/ssl.html)
for details on managing SSL certificates and configuring NGINX.
### Load balancer terminates SSL without backend SSL
Configure your load balancer to use the `HTTP(S)` protocol rather than `TCP`.
The load balancer is then responsible for managing SSL certificates and
terminating SSL.
Since communication between the load balancer and GitLab is not secure,
there is some additional configuration needed. See the
[proxied SSL documentation](https://docs.gitlab.com/omnibus/settings/ssl.html#configure-a-reverse-proxy-or-load-balancer-ssl-termination)
for details.
### Load balancer terminates SSL with backend SSL
Configure your load balancers to use the 'HTTP(S)' protocol rather than 'TCP'.
The load balancers are responsible for managing SSL certificates that
end users see.
Traffic is also secure between the load balancers and NGINX in this
scenario. There is no need to add configuration for proxied SSL since the
connection is secure all the way. However, configuration needs to be
added to GitLab to configure SSL certificates. See the
[HTTPS documentation](https://docs.gitlab.com/omnibus/settings/ssl.html)
for details on managing SSL certificates and configuring NGINX.
### Readiness checks
Ensure the external load balancer only routes to working services with built
in monitoring endpoints. The [readiness checks](../../user/admin_area/monitoring/health_check.md)
all require [additional configuration](../monitoring/ip_allowlist.md)
on the nodes being checked, otherwise, the external load balancer is not able to
connect.
### Ports
The basic ports to be used are shown in the table below.
| LB Port | Backend Port | Protocol |
| ------- | ------------ | ------------------------ |
| 80 | 80 | HTTP (*1*) |
| 443 | 443 | TCP or HTTPS (*1*) (*2*) |
| 22 | 22 | TCP |
- (*1*): [Web terminal](../../ci/environments/index.md#web-terminals-deprecated) support requires
your load balancer to correctly handle WebSocket connections. When using
HTTP or HTTPS proxying, this means your load balancer must be configured
to pass through the `Connection` and `Upgrade` hop-by-hop headers. See the
[web terminal](../integration/terminal.md) integration guide for
more details.
- (*2*): When using HTTPS protocol for port 443, you need to add an SSL
certificate to the load balancers. If you wish to terminate SSL at the
GitLab application server instead, use TCP protocol.
If you're using GitLab Pages with custom domain support you need some
additional port configurations.
GitLab Pages requires a separate virtual IP address. Configure DNS to point the
`pages_external_url` from `/etc/gitlab/gitlab.rb` at the new virtual IP address. See the
[GitLab Pages documentation](../pages/index.md) for more information.
| LB Port | Backend Port | Protocol |
| ------- | ------------- | --------- |
| 80 | Varies (*1*) | HTTP |
| 443 | Varies (*1*) | TCP (*2*) |
- (*1*): The backend port for GitLab Pages depends on the
`gitlab_pages['external_http']` and `gitlab_pages['external_https']`
setting. See [GitLab Pages documentation](../pages/index.md) for more details.
- (*2*): Port 443 for GitLab Pages should always use the TCP protocol. Users can
configure custom domains with custom SSL, which would not be possible
if SSL was terminated at the load balancer.
#### Alternate SSH Port
Some organizations have policies against opening SSH port 22. In this case,
it may be helpful to configure an alternate SSH hostname that allows users
to use SSH on port 443. An alternate SSH hostname requires a new virtual IP address
compared to the other GitLab HTTP configuration above.
Configure DNS for an alternate SSH hostname such as `altssh.gitlab.example.com`.
| LB Port | Backend Port | Protocol |
| ------- | ------------ | -------- |
| 443 | 22 | TCP |
## Configure the internal load balancer
The Internal Load Balancer is used to balance any internal connections the GitLab environment requires
such as connections to [PgBouncer](#configure-pgbouncer) and [Praefect](#configure-praefect) (Gitaly Cluster).
It's a separate node from the External Load Balancer and shouldn't have any access externally.
The following IP is used as an example:
- `10.6.0.40`: Internal Load Balancer
Here's how you could do it with [HAProxy](https://www.haproxy.org/):
```plaintext
global
log /dev/log local0
log localhost local1 notice
log stdout format raw local0
defaults
log global
default-server inter 10s fall 3 rise 2
balance leastconn
frontend internal-pgbouncer-tcp-in
bind *:6432
mode tcp
option tcplog
default_backend pgbouncer
frontend internal-praefect-tcp-in
bind *:2305
mode tcp
option tcplog
option clitcpka
default_backend praefect
backend pgbouncer
mode tcp
option tcp-check
server pgbouncer1 10.6.0.21:6432 check
server pgbouncer2 10.6.0.22:6432 check
server pgbouncer3 10.6.0.23:6432 check
backend praefect
mode tcp
option tcp-check
option srvtcpka
server praefect1 10.6.0.131:2305 check
server praefect2 10.6.0.132:2305 check
server praefect3 10.6.0.133:2305 check
```
Refer to your preferred Load Balancer's documentation for further guidance.
Also ensure that the routing methods used are distributing calls evenly across
all nodes.
## Configure Redis
Using [Redis](https://redis.io/) in scalable environment is possible using a **Primary** x **Replica**
topology with a [Redis Sentinel](https://redis.io/docs/manual/sentinel/) service to watch and automatically
start the failover procedure.
Redis requires authentication if used with Sentinel. See
[Redis Security](https://redis.io/docs/manual/security/) documentation for more
information. We recommend using a combination of a Redis password and tight
firewall rules to secure your Redis service.
You are highly encouraged to read the [Redis Sentinel](https://redis.io/docs/manual/sentinel/) documentation
before configuring Redis with GitLab to fully understand the topology and
architecture.
In this section, you are guided through configuring an external Redis instance
to be used with GitLab. The following IPs are used as an example:
- `10.6.0.61`: Redis Primary
- `10.6.0.62`: Redis Replica 1
- `10.6.0.63`: Redis Replica 2
### Provide your own Redis instance
Managed Redis from cloud providers such as AWS ElastiCache works. If these
services support high availability, be sure it is **not** the Redis Cluster type.
Redis version 5.0 or higher is required, as this is what ships with
Omnibus GitLab packages starting with GitLab 13.0. Older Redis versions
do not support an optional count argument to SPOP which is now required for
[Merge Trains](../../ci/pipelines/merge_trains.md).
Note the Redis node's IP address or hostname, port, and password (if required).
These are necessary when configuring the
[GitLab application servers](#configure-gitlab-rails) later.
### Standalone Redis using Omnibus GitLab
This is the section where we install and set up the new Redis instances.
The requirements for a Redis setup are the following:
1. All Redis nodes must be able to talk to each other and accept incoming
connections over Redis (`6379`) and Sentinel (`26379`) ports (unless you
change the default ones).
1. The server that hosts the GitLab application must be able to access the
Redis nodes.
1. Protect the nodes from access from external networks
([Internet](https://gitlab.com/gitlab-org/gitlab-foss/uploads/c4cc8cd353604bd80315f9384035ff9e/The_Internet_IT_Crowd.png)),
using a firewall.
Both the primary and replica Redis nodes need the same password defined in
`redis['password']`. At any time during a failover, the Sentinels can reconfigure
a node and change its status from primary to replica (and vice versa).
#### Configuring the primary Redis instance
1. SSH in to the **Primary** Redis server.
1. [Download and install](https://about.gitlab.com/install/) the Omnibus GitLab
package of your choice. Be sure to both follow _only_ installation steps 1 and 2
on the page, and to select the correct Omnibus GitLab package, with the same version
and type (Community or Enterprise editions) as your current install.
1. Edit `/etc/gitlab/gitlab.rb` and add the contents:
```ruby
# Specify server role as 'redis_master_role' and enable Consul agent
roles(['redis_master_role', 'consul_role'])
# IP address pointing to a local IP that the other machines can reach to.
# You can also set bind to '0.0.0.0' which listen in all interfaces.
# If you really need to bind to an external accessible IP, make
# sure you add extra firewall rules to prevent unauthorized access.
redis['bind'] = '10.6.0.61'
# Define a port so Redis can listen for TCP requests which will allow other
# machines to connect to it.
redis['port'] = 6379
# Set up password authentication for Redis (use the same password in all nodes).
redis['password'] = 'redis-password-goes-here'
## Enable service discovery for Prometheus
consul['monitoring_service_discovery'] = true
## The IPs of the Consul server nodes
## You can also use FQDNs and intermix them with IPs
consul['configuration'] = {
retry_join: %w(10.6.0.11 10.6.0.12 10.6.0.13),
}
# Set the network addresses that the exporters will listen on
node_exporter['listen_address'] = '0.0.0.0:9100'
redis_exporter['listen_address'] = '0.0.0.0:9121'
redis_exporter['flags'] = {
'redis.addr' => 'redis://10.6.0.61:6379',
'redis.password' => 'redis-password-goes-here',
}
# Prevent database migrations from running on upgrade automatically
gitlab_rails['auto_migrate'] = false
```
1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the first Omnibus node you configured and add or replace
the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.
1. [Reconfigure Omnibus GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
You can specify multiple roles, like sentinel and Redis, as:
`roles(['redis_sentinel_role', 'redis_master_role'])`. Read more about
[roles](https://docs.gitlab.com/omnibus/roles/).
You can list the current Redis Primary, Replica status via:
```shell
/opt/gitlab/embedded/bin/redis-cli -h -a 'redis-password-goes-here' info replication
```
Show running GitLab services via:
```shell
gitlab-ctl status
```
The output should be similar to the following:
```plaintext
run: consul: (pid 30043) 76863s; run: log: (pid 29691) 76892s
run: logrotate: (pid 31152) 3070s; run: log: (pid 29595) 76908s
run: node-exporter: (pid 30064) 76862s; run: log: (pid 29624) 76904s
run: redis: (pid 30070) 76861s; run: log: (pid 29573) 76914s
run: redis-exporter: (pid 30075) 76861s; run: log: (pid 29674) 76896s
```
#### Configuring the replica Redis instances
1. SSH in to the **replica** Redis server.
1. [Download and install](https://about.gitlab.com/install/) the Omnibus GitLab
package of your choice. Be sure to both follow _only_ installation steps 1 and 2
on the page, and to select the correct Omnibus GitLab package, with the same version
and type (Community or Enterprise editions) as your current install.
1. Edit `/etc/gitlab/gitlab.rb` and add the contents:
```ruby
# Specify server role as 'redis_replica_role' and enable Consul agent
roles(['redis_replica_role', 'consul_role'])
# IP address pointing to a local IP that the other machines can reach to.
# You can also set bind to '0.0.0.0' which listen in all interfaces.
# If you really need to bind to an external accessible IP, make
# sure you add extra firewall rules to prevent unauthorized access.
redis['bind'] = '10.6.0.62'
# Define a port so Redis can listen for TCP requests which will allow other
# machines to connect to it.
redis['port'] = 6379
# The same password for Redis authentication you set up for the primary node.
redis['password'] = 'redis-password-goes-here'
# The IP of the primary Redis node.
redis['master_ip'] = '10.6.0.61'
# Port of primary Redis server, uncomment to change to non default. Defaults
# to `6379`.
#redis['master_port'] = 6379
## Enable service discovery for Prometheus
consul['monitoring_service_discovery'] = true
## The IPs of the Consul server nodes
## You can also use FQDNs and intermix them with IPs
consul['configuration'] = {
retry_join: %w(10.6.0.11 10.6.0.12 10.6.0.13),
}
# Set the network addresses that the exporters will listen on
node_exporter['listen_address'] = '0.0.0.0:9100'
redis_exporter['listen_address'] = '0.0.0.0:9121'
redis_exporter['flags'] = {
'redis.addr' => 'redis://10.6.0.62:6379',
'redis.password' => 'redis-password-goes-here',
}
# Prevent database migrations from running on upgrade automatically
gitlab_rails['auto_migrate'] = false
```
1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the first Omnibus node you configured and add or replace
the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.
1. [Reconfigure Omnibus GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
1. Go through the steps again for all the other replica nodes, and
make sure to set up the IPs correctly.
You can specify multiple roles, like sentinel and Redis, as:
`roles(['redis_sentinel_role', 'redis_master_role'])`. Read more about
[roles](https://docs.gitlab.com/omnibus/roles/).
These values don't have to be changed again in `/etc/gitlab/gitlab.rb` after
a failover, as the nodes are managed by the [Sentinels](#configure-consul-and-sentinel), and even after a
`gitlab-ctl reconfigure`, they get their configuration restored by
the same Sentinels.
Advanced [configuration options](https://docs.gitlab.com/omnibus/settings/redis.html)
are supported and can be added if needed.
## Configure Consul and Sentinel
Now that the Redis servers are all set up, let's configure the Sentinel
servers. The following IPs are used as an example:
- `10.6.0.11`: Consul/Sentinel 1
- `10.6.0.12`: Consul/Sentinel 2
- `10.6.0.13`: Consul/Sentinel 3
NOTE:
If you're using an external Redis Sentinel instance, be sure to exclude the
`requirepass` parameter from the Sentinel configuration. This parameter causes
clients to report `NOAUTH Authentication required.`.
[Redis Sentinel 3.2.x doesn't support password authentication](https://github.com/antirez/redis/issues/3279).
To configure the Sentinel:
1. SSH in to the server that hosts Consul/Sentinel.
1. [Download and install](https://about.gitlab.com/install/) the Omnibus GitLab
package of your choice. Be sure to both follow _only_ installation steps 1 and 2
on the page, and to select the correct Omnibus GitLab package, with the same version
and type (Community or Enterprise editions) as your current install.
1. Edit `/etc/gitlab/gitlab.rb` and add the contents:
```ruby
roles(['redis_sentinel_role', 'consul_role'])
# Must be the same in every sentinel node
redis['master_name'] = 'gitlab-redis'
# The same password for Redis authentication you set up for the primary node.
redis['master_password'] = 'redis-password-goes-here'
# The IP of the primary Redis node.
redis['master_ip'] = '10.6.0.61'
# Define a port so Redis can listen for TCP requests which will allow other
# machines to connect to it.
redis['port'] = 6379
# Port of primary Redis server, uncomment to change to non default. Defaults
# to `6379`.
#redis['master_port'] = 6379
## Configure Sentinel
sentinel['bind'] = '10.6.0.11'
# Port that Sentinel listens on, uncomment to change to non default. Defaults
# to `26379`.
# sentinel['port'] = 26379
## Quorum must reflect the amount of voting sentinels it take to start a failover.
## Value must NOT be greater then the amount of sentinels.
##
## The quorum can be used to tune Sentinel in two ways:
## 1. If a the quorum is set to a value smaller than the majority of Sentinels
## we deploy, we are basically making Sentinel more sensible to primary failures,
## triggering a failover as soon as even just a minority of Sentinels is no longer
## able to talk with the primary.
## 1. If a quorum is set to a value greater than the majority of Sentinels, we are
## making Sentinel able to failover only when there are a very large number (larger
## than majority) of well connected Sentinels which agree about the primary being down.s
sentinel['quorum'] = 2
## Consider unresponsive server down after x amount of ms.
# sentinel['down_after_milliseconds'] = 10000
## Specifies the failover timeout in milliseconds. It is used in many ways:
##
## - The time needed to re-start a failover after a previous failover was
## already tried against the same primary by a given Sentinel, is two
## times the failover timeout.
##
## - The time needed for a replica replicating to a wrong primary according
## to a Sentinel current configuration, to be forced to replicate
## with the right primary, is exactly the failover timeout (counting since
## the moment a Sentinel detected the misconfiguration).
##
## - The time needed to cancel a failover that is already in progress but
## did not produced any configuration change (REPLICAOF NO ONE yet not
## acknowledged by the promoted replica).
##
## - The maximum time a failover in progress waits for all the replica to be
## reconfigured as replicas of the new primary. However even after this time
## the replicas will be reconfigured by the Sentinels anyway, but not with
## the exact parallel-syncs progression as specified.
# sentinel['failover_timeout'] = 60000
## Enable service discovery for Prometheus
consul['monitoring_service_discovery'] = true
## The IPs of the Consul server nodes
## You can also use FQDNs and intermix them with IPs
consul['configuration'] = {
server: true,
retry_join: %w(10.6.0.11 10.6.0.12 10.6.0.13),
}
# Set the network addresses that the exporters will listen on
node_exporter['listen_address'] = '0.0.0.0:9100'
redis_exporter['listen_address'] = '0.0.0.0:9121'
# Prevent database migrations from running on upgrade automatically
gitlab_rails['auto_migrate'] = false
```
1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the first Omnibus node you configured and add or replace
the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.
1. [Reconfigure Omnibus GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
1. Go through the steps again for all the other Consul/Sentinel nodes, and
make sure you set up the correct IPs.
A Consul leader is _elected_ when the provisioning of the third Consul server is
complete. Viewing the Consul logs `sudo gitlab-ctl tail consul` displays
`...[INFO] consul: New leader elected: ...`.
You can list the current Consul members (server, client):
```shell
sudo /opt/gitlab/embedded/bin/consul members
```
You can verify the GitLab services are running:
```shell
sudo gitlab-ctl status
```
The output should be similar to the following:
```plaintext
run: consul: (pid 30074) 76834s; run: log: (pid 29740) 76844s
run: logrotate: (pid 30925) 3041s; run: log: (pid 29649) 76861s
run: node-exporter: (pid 30093) 76833s; run: log: (pid 29663) 76855s
run: sentinel: (pid 30098) 76832s; run: log: (pid 29704) 76850s
```
## Configure PostgreSQL
In this section, you are guided through configuring a highly available PostgreSQL
cluster to be used with GitLab.
### Provide your own PostgreSQL instance
If you're hosting GitLab on a cloud provider, you can optionally use a
managed service for PostgreSQL.
A reputable provider or solution should be used for this. [Google Cloud SQL](https://cloud.google.com/sql/docs/postgres/high-availability#normal) and [Amazon RDS](https://aws.amazon.com/rds/) are known to work. However, Amazon Aurora is **incompatible** with load balancing enabled by default in [14.4.0](../../update/index.md#1440). See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
If you use a cloud-managed service, or provide your own PostgreSQL:
1. Set up PostgreSQL according to the
[database requirements document](../../install/requirements.md#database).
1. Set up a `gitlab` username with a password of your choice. The `gitlab` user
needs privileges to create the `gitlabhq_production` database.
1. Configure the GitLab application servers with the appropriate details.
This step is covered in [Configuring the GitLab Rails application](#configure-gitlab-rails).
1. For improved performance, configuring [Database Load Balancing](../postgresql/database_load_balancing.md)
with multiple read replicas is recommended.
See [Configure GitLab using an external PostgreSQL service](../postgresql/external.md) for
further configuration steps.
### Standalone PostgreSQL using Omnibus GitLab
The recommended Omnibus GitLab configuration for a PostgreSQL cluster with
replication and failover requires:
- A minimum of three PostgreSQL nodes.
- A minimum of three Consul server nodes.
- A minimum of three PgBouncer nodes that track and handle primary database reads and writes.
- An [internal load balancer](#configure-the-internal-load-balancer) (TCP) to balance requests between the PgBouncer nodes.
- [Database Load Balancing](../postgresql/database_load_balancing.md) enabled.
A local PgBouncer service to be configured on each PostgreSQL node. Note that this is separate from the main PgBouncer cluster that tracks the primary.
The following IPs are used as an example:
- `10.6.0.31`: PostgreSQL primary
- `10.6.0.32`: PostgreSQL secondary 1
- `10.6.0.33`: PostgreSQL secondary 2
First, make sure to [install](https://about.gitlab.com/install/)
the Linux GitLab package **on each node**. Following the steps,
install the necessary dependencies from step 1, and add the
GitLab package repository from step 2. When installing GitLab
in the second step, do not supply the `EXTERNAL_URL` value.
#### PostgreSQL nodes
1. SSH in to one of the PostgreSQL nodes.
1. Generate a password hash for the PostgreSQL username/password pair. This assumes you use the default
username of `gitlab` (recommended). The command requests a password
and confirmation. Use the value that is output by this command in the next
step as the value of ``:
```shell
sudo gitlab-ctl pg-password-md5 gitlab
```
1. Generate a password hash for the PgBouncer username/password pair. This assumes you use the default
username of `pgbouncer` (recommended). The command requests a password
and confirmation. Use the value that is output by this command in the next
step as the value of ``:
```shell
sudo gitlab-ctl pg-password-md5 pgbouncer
```
1. Generate a password hash for the PostgreSQL replication username/password pair. This assumes you use the default
username of `gitlab_replicator` (recommended). The command requests a password
and a confirmation. Use the value that is output by this command in the next step
as the value of ``:
```shell
sudo gitlab-ctl pg-password-md5 gitlab_replicator
```
1. Generate a password hash for the Consul database username/password pair. This assumes you use the default
username of `gitlab-consul` (recommended). The command requests a password
and confirmation. Use the value that is output by this command in the next
step as the value of ``:
```shell
sudo gitlab-ctl pg-password-md5 gitlab-consul
```
1. On every database node, edit `/etc/gitlab/gitlab.rb` replacing values noted in the `# START user configuration` section:
```ruby
# Disable all components except Patroni, PgBouncer and Consul
roles(['patroni_role', 'pgbouncer_role'])
# PostgreSQL configuration
postgresql['listen_address'] = '0.0.0.0'
# Sets `max_replication_slots` to double the number of database nodes.
# Patroni uses one extra slot per node when initiating the replication.
patroni['postgresql']['max_replication_slots'] = 6
# Set `max_wal_senders` to one more than the number of replication slots in the cluster.
# This is used to prevent replication from using up all of the
# available database connections.
patroni['postgresql']['max_wal_senders'] = 7
# Incoming recommended value for max connections is 500. See https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/5691.
patroni['postgresql']['max_connections'] = 500
# Prevent database migrations from running on upgrade automatically
gitlab_rails['auto_migrate'] = false
# Configure the Consul agent
consul['services'] = %w(postgresql)
## Enable service discovery for Prometheus
consul['monitoring_service_discovery'] = true
# START user configuration
# Please set the real values as explained in Required Information section
#
# Replace PGBOUNCER_PASSWORD_HASH with a generated md5 value
postgresql['pgbouncer_user_password'] = ''
# Replace POSTGRESQL_REPLICATION_PASSWORD_HASH with a generated md5 value
postgresql['sql_replication_password'] = ''
# Replace POSTGRESQL_PASSWORD_HASH with a generated md5 value
postgresql['sql_user_password'] = ''
# Set up basic authentication for the Patroni API (use the same username/password in all nodes).
patroni['username'] = ''
patroni['password'] = ''
# Replace 10.6.0.0/24 with Network Addresses for your other patroni nodes
patroni['allowlist'] = %w(10.6.0.0/24 127.0.0.1/32)
# Replace 10.6.0.0/24 with Network Address
postgresql['trust_auth_cidr_addresses'] = %w(10.6.0.0/24 127.0.0.1/32)
# Local PgBouncer service for Database Load Balancing
pgbouncer['databases'] = {
gitlabhq_production: {
host: "127.0.0.1",
user: "pgbouncer",
password: ''
}
}
# Set the network addresses that the exporters will listen on for monitoring
node_exporter['listen_address'] = '0.0.0.0:9100'
postgres_exporter['listen_address'] = '0.0.0.0:9187'
## The IPs of the Consul server nodes
## You can also use FQDNs and intermix them with IPs
consul['configuration'] = {
retry_join: %w(10.6.0.11 10.6.0.12 10.6.0.13),
}
#
# END user configuration
```
PostgreSQL, with Patroni managing its failover, defaults to use `pg_rewind` by default to handle conflicts.
Like most failover handling methods, this has a small chance of leading to data loss.
Learn more about the various [Patroni replication methods](../postgresql/replication_and_failover.md#selecting-the-appropriate-patroni-replication-method).
1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the first Omnibus node you configured and add or replace
the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.
1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
Advanced [configuration options](https://docs.gitlab.com/omnibus/settings/database.html)
are supported and can be added if needed.
#### PostgreSQL post-configuration
SSH in to any of the Patroni nodes on the **primary site**:
1. Check the status of the leader and cluster:
```shell
gitlab-ctl patroni members
```
The output should be similar to the following:
```plaintext
| Cluster | Member | Host | Role | State | TL | Lag in MB | Pending restart |
|---------------|-----------------------------------|-----------|--------|---------|-----|-----------|-----------------|
| postgresql-ha | | 10.6.0.31 | Leader | running | 175 | | * |
| postgresql-ha | | 10.6.0.32 | | running | 175 | 0 | * |
| postgresql-ha | | 10.6.0.33 | | running | 175 | 0 | * |
```
If the 'State' column for any node doesn't say "running", check the
[PostgreSQL replication and failover troubleshooting section](../postgresql/replication_and_failover.md#pgbouncer-error-error-pgbouncer-cannot-connect-to-server)
before proceeding.
### Configure PgBouncer
Now that the PostgreSQL servers are all set up, let's configure PgBouncer
for tracking and handling reads/writes to the primary database.
The following IPs are used as an example:
- `10.6.0.21`: PgBouncer 1
- `10.6.0.22`: PgBouncer 2
- `10.6.0.23`: PgBouncer 3
1. On each PgBouncer node, edit `/etc/gitlab/gitlab.rb`, and replace
`` and `` with the
password hashes you [set up previously](#postgresql-nodes):
```ruby
# Disable all components except Pgbouncer and Consul agent
roles(['pgbouncer_role'])
# Configure PgBouncer
pgbouncer['admin_users'] = %w(pgbouncer gitlab-consul)
pgbouncer['users'] = {
'gitlab-consul': {
password: ''
},
'pgbouncer': {
password: ''
}
}
# Incoming recommended value for max db connections is 150. See https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/5691.
pgbouncer['max_db_connections'] = 150
# Configure Consul agent
consul['watchers'] = %w(postgresql)
consul['configuration'] = {
retry_join: %w(10.6.0.11 10.6.0.12 10.6.0.13)
}
# Enable service discovery for Prometheus
consul['monitoring_service_discovery'] = true
# Set the network addresses that the exporters will listen on
node_exporter['listen_address'] = '0.0.0.0:9100'
pgbouncer_exporter['listen_address'] = '0.0.0.0:9188'
```
1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the first Omnibus node you configured and add or replace
the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.
1. [Reconfigure Omnibus GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
1. Create a `.pgpass` file so Consul is able to
reload PgBouncer. Enter the PgBouncer password twice when asked:
```shell
gitlab-ctl write-pgpass --host 127.0.0.1 --database pgbouncer --user pgbouncer --hostuser gitlab-consul
```
1. Ensure each node is talking to the current master:
```shell
gitlab-ctl pgb-console # You will be prompted for PGBOUNCER_PASSWORD
```
If there is an error `psql: ERROR: Auth failed` after typing in the
password, ensure you previously generated the MD5 password hashes with the correct
format. The correct format is to concatenate the password and the username:
`PASSWORDUSERNAME`. For example, `Sup3rS3cr3tpgbouncer` would be the text
needed to generate an MD5 password hash for the `pgbouncer` user.
1. Once the console prompt is available, run the following queries:
```shell
show databases ; show clients ;
```
The output should be similar to the following:
```plaintext
name | host | port | database | force_user | pool_size | reserve_pool | pool_mode | max_connections | current_connections
---------------------+-------------+------+---------------------+------------+-----------+--------------+-----------+-----------------+---------------------
gitlabhq_production | MASTER_HOST | 5432 | gitlabhq_production | | 20 | 0 | | 0 | 0
pgbouncer | | 6432 | pgbouncer | pgbouncer | 2 | 0 | statement | 0 | 0
(2 rows)
type | user | database | state | addr | port | local_addr | local_port | connect_time | request_time | ptr | link | remote_pid | tls
------+-----------+---------------------+---------+----------------+-------+------------+------------+---------------------+---------------------+-----------+------+------------+-----
C | pgbouncer | pgbouncer | active | 127.0.0.1 | 56846 | 127.0.0.1 | 6432 | 2017-08-21 18:09:59 | 2017-08-21 18:10:48 | 0x22b3880 | | 0 |
(2 rows)
```
1. Verify the GitLab services are running:
```shell
sudo gitlab-ctl status
```
The output should be similar to the following:
```plaintext
run: consul: (pid 31530) 77150s; run: log: (pid 31106) 77182s
run: logrotate: (pid 32613) 3357s; run: log: (pid 30107) 77500s
run: node-exporter: (pid 31550) 77149s; run: log: (pid 30138) 77493s
run: pgbouncer: (pid 32033) 75593s; run: log: (pid 31117) 77175s
run: pgbouncer-exporter: (pid 31558) 77148s; run: log: (pid 31498) 77156s
```
## Configure Gitaly Cluster
[Gitaly Cluster](../gitaly/praefect.md) is a GitLab provided and recommended fault tolerant solution for storing Git repositories.
In this configuration, every Git repository is stored on every Gitaly node in the cluster, with one being designated the primary, and failover occurs automatically if the primary node goes down.
NOTE:
Gitaly Cluster provides the benefits of fault tolerance, but comes with additional complexity of setup and management. Review the existing [technical limitations and considerations before deploying Gitaly Cluster](../gitaly/index.md#before-deploying-gitaly-cluster).
For implementations with sharded Gitaly, use the same Gitaly specs. Follow the [separate Gitaly documentation](../gitaly/configure_gitaly.md) instead of this section.
The recommended cluster setup includes the following components:
- 3 Gitaly nodes: Replicated storage of Git repositories.
- 3 Praefect nodes: Router and transaction manager for Gitaly Cluster.
- 1 Praefect PostgreSQL node: Database server for Praefect. A third-party solution
is required for Praefect database connections to be made highly available.
- 1 load balancer: A load balancer is required for Praefect. The
[internal load balancer](#configure-the-internal-load-balancer) is used.
This section details how to configure the recommended standard setup in order.
For more advanced setups refer to the [standalone Gitaly Cluster documentation](../gitaly/praefect.md).
### Configure Praefect PostgreSQL
Praefect, the routing and transaction manager for Gitaly Cluster, requires its own database server to store data on Gitaly Cluster status.
If you want to have a highly available setup, Praefect requires a third-party PostgreSQL database.
A built-in solution is being [worked on](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/5919).
#### Praefect non-HA PostgreSQL standalone using Omnibus GitLab
The following IPs are used as an example:
- `10.6.0.141`: Praefect PostgreSQL
First, make sure to [install](https://about.gitlab.com/install/)
the Linux GitLab package in the Praefect PostgreSQL node. Following the steps,
install the necessary dependencies from step 1, and add the
GitLab package repository from step 2. When installing GitLab
in the second step, do not supply the `EXTERNAL_URL` value.
1. SSH in to the Praefect PostgreSQL node.
1. Create a strong password to be used for the Praefect PostgreSQL user. Take note of this password as ``.
1. Generate the password hash for the Praefect PostgreSQL username/password pair. This assumes you use the default
username of `praefect` (recommended). The command requests the password ``
and confirmation. Use the value that is output by this command in the next
step as the value of ``:
```shell
sudo gitlab-ctl pg-password-md5 praefect
```
1. Edit `/etc/gitlab/gitlab.rb` replacing values noted in the `# START user configuration` section:
```ruby
# Disable all components except PostgreSQL and Consul
roles(['postgres_role', 'consul_role'])
# PostgreSQL configuration
postgresql['listen_address'] = '0.0.0.0'
postgresql['max_connections'] = 200
# Prevent database migrations from running on upgrade automatically
gitlab_rails['auto_migrate'] = false
# Configure the Consul agent
## Enable service discovery for Prometheus
consul['monitoring_service_discovery'] = true
# START user configuration
# Please set the real values as explained in Required Information section
#
# Replace PRAEFECT_POSTGRESQL_PASSWORD_HASH with a generated md5 value
postgresql['sql_user_password'] = ""
# Replace XXX.XXX.XXX.XXX/YY with Network Address
postgresql['trust_auth_cidr_addresses'] = %w(10.6.0.0/24 127.0.0.1/32)
# Set the network addresses that the exporters will listen on for monitoring
node_exporter['listen_address'] = '0.0.0.0:9100'
postgres_exporter['listen_address'] = '0.0.0.0:9187'
## The IPs of the Consul server nodes
## You can also use FQDNs and intermix them with IPs
consul['configuration'] = {
retry_join: %w(10.6.0.11 10.6.0.12 10.6.0.13),
}
#
# END user configuration
```
1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the first Omnibus node you configured and add or replace
the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.
1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
1. Follow the [post configuration](#praefect-postgresql-post-configuration).
#### Praefect HA PostgreSQL third-party solution
[As noted](#configure-praefect-postgresql), a third-party PostgreSQL solution for
Praefect's database is recommended if aiming for full High Availability.
There are many third-party solutions for PostgreSQL HA. The solution selected must have the following to work with Praefect:
- A static IP for all connections that doesn't change on failover.
- [`LISTEN`](https://www.postgresql.org/docs/12/sql-listen.html) SQL functionality must be supported.
NOTE:
With a third-party setup, it's possible to colocate Praefect's database on the same server as
the main [GitLab](#provide-your-own-postgresql-instance) database as a convenience unless
you are using Geo, where separate database instances are required for handling replication correctly.
In this setup, the specs of the main database setup shouldn't need to be changed as the impact should be
minimal.
A reputable provider or solution should be used for this. [Google Cloud SQL](https://cloud.google.com/sql/docs/postgres/high-availability#normal) and [Amazon RDS](https://aws.amazon.com/rds/) are known to work. However, Amazon Aurora is **incompatible** with load balancing enabled by default in [14.4.0](../../update/index.md#1440). See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
Once the database is set up, follow the [post configuration](#praefect-postgresql-post-configuration).
#### Praefect PostgreSQL post-configuration
After the Praefect PostgreSQL server has been set up, you then need to configure the user and database for Praefect to use.
We recommend the user be named `praefect` and the database `praefect_production`, and these can be configured as standard in PostgreSQL.
The password for the user is the same as the one you configured earlier as ``.
This is how this would work with a Omnibus GitLab PostgreSQL setup:
1. SSH in to the Praefect PostgreSQL node.
1. Connect to the PostgreSQL server with administrative access.
The `gitlab-psql` user should be used here for this as it's added by default in Omnibus.
The database `template1` is used because it is created by default on all PostgreSQL servers.
```shell
/opt/gitlab/embedded/bin/psql -U gitlab-psql -d template1 -h POSTGRESQL_SERVER_ADDRESS
```
1. Create the new user `praefect`, replacing ``:
```shell
CREATE ROLE praefect WITH LOGIN CREATEDB PASSWORD ;
```
1. Reconnect to the PostgreSQL server, this time as the `praefect` user:
```shell
/opt/gitlab/embedded/bin/psql -U praefect -d template1 -h POSTGRESQL_SERVER_ADDRESS
```
1. Create a new database `praefect_production`:
```shell
CREATE DATABASE praefect_production WITH ENCODING=UTF8;
```
### Configure Praefect
Praefect is the router and transaction manager for Gitaly Cluster and all connections to Gitaly go through
it. This section details how to configure it.
Praefect requires several secret tokens to secure communications across the Cluster:
- ``: Used for repositories hosted on your Gitaly cluster and can only be accessed by Gitaly clients that carry this token.
- ``: Used for replication traffic inside your Gitaly cluster. This is distinct from `praefect_external_token` because Gitaly clients must not be able to access internal nodes of the Praefect cluster directly; that could lead to data loss.
- ``: The Praefect PostgreSQL password defined in the previous section is also required as part of this setup.
Gitaly Cluster nodes are configured in Praefect via a `virtual storage`. Each storage contains
the details of each Gitaly node that makes up the cluster. Each storage is also given a name
and this name is used in several areas of the configuration. In this guide, the name of the storage is
`default`. Also, this guide is geared towards new installs, if upgrading an existing environment
to use Gitaly Cluster, you may need to use a different name.
Refer to the [Praefect documentation](../gitaly/praefect.md#praefect) for more information.
The following IPs are used as an example:
- `10.6.0.131`: Praefect 1
- `10.6.0.132`: Praefect 2
- `10.6.0.133`: Praefect 3
To configure the Praefect nodes, on each one:
1. SSH in to the Praefect server.
1. [Download and install](https://about.gitlab.com/install/) the Omnibus GitLab
package of your choice. Be sure to follow _only_ installation steps 1 and 2
on the page.
1. Edit the `/etc/gitlab/gitlab.rb` file to configure Praefect:
NOTE:
You can't remove the `default` entry from `virtual_storages` because [GitLab requires it](../gitaly/configure_gitaly.md#gitlab-requires-a-default-repository-storage).
```ruby
# Avoid running unnecessary services on the Praefect server
gitaly['enable'] = false
postgresql['enable'] = false
redis['enable'] = false
nginx['enable'] = false
puma['enable'] = false
sidekiq['enable'] = false
gitlab_workhorse['enable'] = false
prometheus['enable'] = false
alertmanager['enable'] = false
grafana['enable'] = false
gitlab_exporter['enable'] = false
gitlab_kas['enable'] = false
# Praefect Configuration
praefect['enable'] = true
praefect['listen_addr'] = '0.0.0.0:2305'
# Prevent database migrations from running on upgrade automatically
praefect['auto_migrate'] = false
gitlab_rails['auto_migrate'] = false
# Configure the Consul agent
consul['enable'] = true
## Enable service discovery for Prometheus
consul['monitoring_service_discovery'] = true
# START user configuration
# Please set the real values as explained in Required Information section
#
# Praefect External Token
# This is needed by clients outside the cluster (like GitLab Shell) to communicate with the Praefect cluster
praefect['auth_token'] = ''
# Praefect Database Settings
praefect['database_host'] = '10.6.0.141'
praefect['database_port'] = 5432
# `no_proxy` settings must always be a direct connection for caching
praefect['database_direct_host'] = '10.6.0.141'
praefect['database_direct_port'] = 5432
praefect['database_dbname'] = 'praefect_production'
praefect['database_user'] = 'praefect'
praefect['database_password'] = ''
# Praefect Virtual Storage config
# Name of storage hash must match storage name in git_data_dirs on GitLab
# server ('praefect') and in git_data_dirs on Gitaly nodes ('gitaly-1')
praefect['virtual_storages'] = {
'default' => {
'nodes' => {
'gitaly-1' => {
'address' => 'tcp://10.6.0.91:8075',
'token' => ''
},
'gitaly-2' => {
'address' => 'tcp://10.6.0.92:8075',
'token' => ''
},
'gitaly-3' => {
'address' => 'tcp://10.6.0.93:8075',
'token' => ''
},
}
}
}
# Set the network addresses that the exporters will listen on for monitoring
node_exporter['listen_address'] = '0.0.0.0:9100'
praefect['prometheus_listen_addr'] = '0.0.0.0:9652'
## The IPs of the Consul server nodes
## You can also use FQDNs and intermix them with IPs
consul['configuration'] = {
retry_join: %w(10.6.0.11 10.6.0.12 10.6.0.13),
}
#
# END user configuration
```
1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the first Omnibus node you configured and add or replace
the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.
1. Praefect requires to run some database migrations, much like the main GitLab application. For this
you should select **one Praefect node only to run the migrations**, AKA the _Deploy Node_. This node
must be configured first before the others as follows:
1. In the `/etc/gitlab/gitlab.rb` file, change the `praefect['auto_migrate']` setting value from `false` to `true`
1. To ensure database migrations are only run during reconfigure and not automatically on upgrade, run:
```shell
sudo touch /etc/gitlab/skip-auto-reconfigure
```
1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect and
to run the Praefect database migrations.
1. On all other Praefect nodes, [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
### Configure Gitaly
The [Gitaly](../gitaly/index.md) server nodes that make up the cluster have
requirements that are dependent on data and load.
NOTE:
The Reference Architecture specs have been designed with good headroom in mind
but for Gitaly, increased specs or additional
Gitaly Cluster arrays may be required for notably large data sets or load.
Due to Gitaly having notable input and output requirements, we strongly
recommend that all Gitaly nodes use solid-state drives (SSDs). These SSDs
should have a throughput of at least 8,000
input/output operations per second (IOPS) for read operations and 2,000 IOPS for
write operations. These IOPS values are initial recommendations, and may be
adjusted to greater or lesser values depending on the scale of your
environment's workload. If you're running the environment on a Cloud provider,
refer to their documentation about how to configure IOPS correctly.
Gitaly servers must not be exposed to the public internet, as Gitaly's network
traffic is unencrypted by default. The use of a firewall is highly recommended
to restrict access to the Gitaly server. Another option is to
[use TLS](#gitaly-cluster-tls-support).
For configuring Gitaly you should note the following:
- `git_data_dirs` should be configured to reflect the storage path for the specific Gitaly node
- `auth_token` should be the same as `praefect_internal_token`
The following IPs are used as an example:
- `10.6.0.91`: Gitaly 1
- `10.6.0.92`: Gitaly 2
- `10.6.0.93`: Gitaly 3
On each node:
1. [Download and install](https://about.gitlab.com/install/) the Omnibus GitLab
package of your choice. Be sure to follow _only_ installation steps 1 and 2
on the page, and _do not_ provide the `EXTERNAL_URL` value.
1. Edit the Gitaly server node's `/etc/gitlab/gitlab.rb` file to configure
storage paths, enable the network listener, and to configure the token:
```ruby
# Avoid running unnecessary services on the Gitaly server
postgresql['enable'] = false
redis['enable'] = false
nginx['enable'] = false
puma['enable'] = false
sidekiq['enable'] = false
gitlab_workhorse['enable'] = false
prometheus['enable'] = false
alertmanager['enable'] = false
grafana['enable'] = false
gitlab_exporter['enable'] = false
gitlab_kas['enable'] = false
# Prevent database migrations from running on upgrade automatically
gitlab_rails['auto_migrate'] = false
# Configure the gitlab-shell API callback URL. Without this, `git push` will
# fail. This can be your 'front door' GitLab URL or an internal load
# balancer.
gitlab_rails['internal_api_url'] = 'https://gitlab.example.com'
# Gitaly
gitaly['enable'] = true
# Make Gitaly accept connections on all network interfaces. You must use
# firewalls to restrict access to this address/port.
# Comment out following line if you only want to support TLS connections
gitaly['listen_addr'] = "0.0.0.0:8075"
# Gitaly Auth Token
# Should be the same as praefect_internal_token
gitaly['auth_token'] = ''
# Gitaly Pack-objects cache
# Recommended to be enabled for improved performance but can notably increase disk I/O
# Refer to https://docs.gitlab.com/ee/administration/gitaly/configure_gitaly.html#pack-objects-cache for more info
gitaly['pack_objects_cache_enabled'] = true
# Configure the Consul agent
consul['enable'] = true
## Enable service discovery for Prometheus
consul['monitoring_service_discovery'] = true
# START user configuration
# Please set the real values as explained in Required Information section
#
## The IPs of the Consul server nodes
## You can also use FQDNs and intermix them with IPs
consul['configuration'] = {
retry_join: %w(10.6.0.11 10.6.0.12 10.6.0.13),
}
# Set the network addresses that the exporters will listen on for monitoring
node_exporter['listen_address'] = '0.0.0.0:9100'
gitaly['prometheus_listen_addr'] = '0.0.0.0:9236'
#
# END user configuration
```
1. Append the following to `/etc/gitlab/gitlab.rb` for each respective server:
- On Gitaly node 1:
```ruby
git_data_dirs({
"gitaly-1" => {
"path" => "/var/opt/gitlab/git-data"
}
})
```
- On Gitaly node 2:
```ruby
git_data_dirs({
"gitaly-2" => {
"path" => "/var/opt/gitlab/git-data"
}
})
```
- On Gitaly node 3:
```ruby
git_data_dirs({
"gitaly-3" => {
"path" => "/var/opt/gitlab/git-data"
}
})
```
1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the first Omnibus node you configured and add or replace
the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.
1. Save the file, and then [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
### Gitaly Cluster TLS support
Praefect supports TLS encryption. To communicate with a Praefect instance that listens
for secure connections, you must:
- Use a `tls://` URL scheme in the `gitaly_address` of the corresponding storage entry
in the GitLab configuration.
- Bring your own certificates because this isn't provided automatically. The certificate
corresponding to each Praefect server must be installed on that Praefect server.
Additionally the certificate, or its certificate authority, must be installed on all Gitaly servers
and on all Praefect clients that communicate with it following the procedure described in
[GitLab custom certificate configuration](https://docs.gitlab.com/omnibus/settings/ssl.html#install-custom-public-certificates) (and repeated below).
Note the following:
- The certificate must specify the address you use to access the Praefect server. You must add the hostname or IP
address as a Subject Alternative Name to the certificate.
- You can configure Praefect servers with both an unencrypted listening address
`listen_addr` and an encrypted listening address `tls_listen_addr` at the same time.
This allows you to do a gradual transition from unencrypted to encrypted traffic, if
necessary. To disable the unencrypted listener, set `praefect['listen_addr'] = nil`.
- The Internal Load Balancer will also access to the certificates and need to be configured
to allow for TLS passthrough.
Refer to the load balancers documentation on how to configure this.
To configure Praefect with TLS:
1. Create certificates for Praefect servers.
1. On the Praefect servers, create the `/etc/gitlab/ssl` directory and copy your key
and certificate there:
```shell
sudo mkdir -p /etc/gitlab/ssl
sudo chmod 755 /etc/gitlab/ssl
sudo cp key.pem cert.pem /etc/gitlab/ssl/
sudo chmod 644 key.pem cert.pem
```
1. Edit `/etc/gitlab/gitlab.rb` and add:
```ruby
praefect['tls_listen_addr'] = "0.0.0.0:3305"
praefect['certificate_path'] = "/etc/gitlab/ssl/cert.pem"
praefect['key_path'] = "/etc/gitlab/ssl/key.pem"
```
1. Save the file and [reconfigure](../restart_gitlab.md#omnibus-gitlab-reconfigure).
1. On the Praefect clients (including each Gitaly server), copy the certificates,
or their certificate authority, into `/etc/gitlab/trusted-certs`:
```shell
sudo cp cert.pem /etc/gitlab/trusted-certs/
```
1. On the Praefect clients (except Gitaly servers), edit `git_data_dirs` in
`/etc/gitlab/gitlab.rb` as follows:
```ruby
git_data_dirs({
"default" => {
"gitaly_address" => 'tls://LOAD_BALANCER_SERVER_ADDRESS:3305',
"gitaly_token" => 'PRAEFECT_EXTERNAL_TOKEN'
}
})
```
1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
## Configure Sidekiq
Sidekiq requires connection to the [Redis](#configure-redis),
[PostgreSQL](#configure-postgresql) and [Gitaly](#configure-gitaly) instances.
Since it's recommended to use [Object storage](#configure-the-object-storage)
over [NFS](#configure-nfs-optional) for data objects, the following examples
include the Object storage configuration.
- `10.6.0.71`: Sidekiq 1
- `10.6.0.72`: Sidekiq 2
- `10.6.0.73`: Sidekiq 3
- `10.6.0.74`: Sidekiq 4
To configure the Sidekiq nodes, one each one:
1. SSH in to the Sidekiq server.
1. [Download and install](https://about.gitlab.com/install/) the Omnibus GitLab
package of your choice. Be sure to follow _only_ installation steps 1 and 2
on the page.
1. Create or edit `/etc/gitlab/gitlab.rb` and use the following configuration:
```ruby
# Avoid running unnecessary services on the Sidekiq server
gitaly['enable'] = false
postgresql['enable'] = false
redis['enable'] = false
nginx['enable'] = false
puma['enable'] = false
gitlab_workhorse['enable'] = false
prometheus['enable'] = false
alertmanager['enable'] = false
grafana['enable'] = false
gitlab_exporter['enable'] = false
gitlab_kas['enable'] = false
# External URL
## This should match the URL of the external load balancer
external_url 'https://gitlab.example.com'
# Redis
## Must be the same in every sentinel node
redis['master_name'] = 'gitlab-redis'
## The same password for Redis authentication you set up for the master node.
redis['master_password'] = ''
## A list of sentinels with `host` and `port`
gitlab_rails['redis_sentinels'] = [
{'host' => '10.6.0.11', 'port' => 26379},
{'host' => '10.6.0.12', 'port' => 26379},
{'host' => '10.6.0.13', 'port' => 26379},
]
# Gitaly Cluster
## git_data_dirs get configured for the Praefect virtual storage
## Address is Internal Load Balancer for Praefect
## Token is praefect_external_token
git_data_dirs({
"default" => {
"gitaly_address" => "tcp://10.6.0.40:2305", # internal load balancer IP
"gitaly_token" => ''
}
})
# PostgreSQL
gitlab_rails['db_host'] = '10.6.0.40' # internal load balancer IP
gitlab_rails['db_port'] = 6432
gitlab_rails['db_password'] = ''
gitlab_rails['db_load_balancing'] = { 'hosts' => ['10.6.0.31', '10.6.0.32', '10.6.0.33'] } # PostgreSQL IPs
## Prevent database migrations from running on upgrade automatically
gitlab_rails['auto_migrate'] = false
# Sidekiq
sidekiq['enable'] = true
sidekiq['listen_address'] = "0.0.0.0"
## Set number of Sidekiq queue processes to the same number as available CPUs
sidekiq['queue_groups'] = ['*'] * 4
## Set number of Sidekiq threads per queue process to the recommend number of 10
sidekiq['max_concurrency'] = 10
# Monitoring
consul['enable'] = true
consul['monitoring_service_discovery'] = true
consul['configuration'] = {
retry_join: %w(10.6.0.11 10.6.0.12 10.6.0.13)
}
## Set the network addresses that the exporters will listen on
node_exporter['listen_address'] = '0.0.0.0:9100'
## Add the monitoring node's IP address to the monitoring whitelist
gitlab_rails['monitoring_whitelist'] = ['10.6.0.81/32', '127.0.0.0/8']
gitlab_rails['prometheus_address'] = '10.6.0.81:9090'
# Object Storage
## This is an example for configuring Object Storage on GCP
## Replace this config with your chosen Object Storage provider as desired
gitlab_rails['object_store']['enabled'] = true
gitlab_rails['object_store']['connection'] = {
'provider' => 'Google',
'google_project' => '',
'google_json_key_location' => ''
}
gitlab_rails['object_store']['objects']['artifacts']['bucket'] = ""
gitlab_rails['object_store']['objects']['external_diffs']['bucket'] = ""
gitlab_rails['object_store']['objects']['lfs']['bucket'] = ""
gitlab_rails['object_store']['objects']['uploads']['bucket'] = ""
gitlab_rails['object_store']['objects']['packages']['bucket'] = ""
gitlab_rails['object_store']['objects']['dependency_proxy']['bucket'] = ""
gitlab_rails['object_store']['objects']['terraform_state']['bucket'] = ""
gitlab_rails['backup_upload_connection'] = {
'provider' => 'Google',
'google_project' => '',
'google_json_key_location' => ''
}
gitlab_rails['backup_upload_remote_directory'] = ""
```
1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the first Omnibus node you configured and add or replace
the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.
1. To ensure database migrations are only run during reconfigure and not automatically on upgrade, run:
```shell
sudo touch /etc/gitlab/skip-auto-reconfigure
```
Only a single designated node should handle migrations as detailed in the
[GitLab Rails post-configuration](#gitlab-rails-post-configuration) section.
1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
1. Verify the GitLab services are running:
```shell
sudo gitlab-ctl status
```
The output should be similar to the following:
```plaintext
run: consul: (pid 30114) 77353s; run: log: (pid 29756) 77367s
run: logrotate: (pid 9898) 3561s; run: log: (pid 29653) 77380s
run: node-exporter: (pid 30134) 77353s; run: log: (pid 29706) 77372s
run: sidekiq: (pid 30142) 77351s; run: log: (pid 29638) 77386s
```
NOTE:
If you find that the environment's Sidekiq job processing is slow with long queues,
more nodes can be added as required. You can also tune your Sidekiq nodes to
run [multiple Sidekiq processes](../operations/extra_sidekiq_processes.md).
## Configure GitLab Rails
This section describes how to configure the GitLab application (Rails) component.
Since it's recommended to use [Object storage](#configure-the-object-storage)
over [NFS](#configure-nfs-optional) for data objects, the following examples
include the Object storage configuration.
On each node perform the following:
1. [Download and install](https://about.gitlab.com/install/) the Omnibus GitLab
package of your choice. Be sure to follow _only_ installation steps 1 and 2
on the page.
1. Create or edit `/etc/gitlab/gitlab.rb` and use the following configuration.
To maintain uniformity of links across nodes, the `external_url`
on the application server should point to the external URL that users use
to access GitLab. This would be the URL of the [external load balancer](#configure-the-external-load-balancer)
which routes traffic to the GitLab application server:
```ruby
external_url 'https://gitlab.example.com'
# git_data_dirs get configured for the Praefect virtual storage
# Address is Internal Load Balancer for Praefect
# Token is praefect_external_token
git_data_dirs({
"default" => {
"gitaly_address" => "tcp://10.6.0.40:2305", # internal load balancer IP
"gitaly_token" => ''
}
})
## Disable components that will not be on the GitLab application server
roles(['application_role'])
gitaly['enable'] = false
nginx['enable'] = true
sidekiq['enable'] = false
## PostgreSQL connection details
# Disable PostgreSQL on the application node
postgresql['enable'] = false
gitlab_rails['db_host'] = '10.6.0.20' # internal load balancer IP
gitlab_rails['db_port'] = 6432
gitlab_rails['db_password'] = ''
gitlab_rails['db_load_balancing'] = { 'hosts' => ['10.6.0.31', '10.6.0.32', '10.6.0.33'] } # PostgreSQL IPs
# Prevent database migrations from running on upgrade automatically
gitlab_rails['auto_migrate'] = false
## Redis connection details
## Must be the same in every sentinel node
redis['master_name'] = 'gitlab-redis'
## The same password for Redis authentication you set up for the Redis primary node.
redis['master_password'] = ''
## A list of sentinels with `host` and `port`
gitlab_rails['redis_sentinels'] = [
{'host' => '10.6.0.11', 'port' => 26379},
{'host' => '10.6.0.12', 'port' => 26379},
{'host' => '10.6.0.13', 'port' => 26379}
]
## Enable service discovery for Prometheus
consul['enable'] = true
consul['monitoring_service_discovery'] = true
# Set the network addresses that the exporters used for monitoring will listen on
node_exporter['listen_address'] = '0.0.0.0:9100'
gitlab_workhorse['prometheus_listen_addr'] = '0.0.0.0:9229'
sidekiq['listen_address'] = "0.0.0.0"
puma['listen'] = '0.0.0.0'
## The IPs of the Consul server nodes
## You can also use FQDNs and intermix them with IPs
consul['configuration'] = {
retry_join: %w(10.6.0.11 10.6.0.12 10.6.0.13),
}
# Add the monitoring node's IP address to the monitoring whitelist and allow it to
# scrape the NGINX metrics
gitlab_rails['monitoring_whitelist'] = ['10.6.0.81/32', '127.0.0.0/8']
nginx['status']['options']['allow'] = ['10.6.0.81/32', '127.0.0.0/8']
gitlab_rails['prometheus_address'] = '10.6.0.81:9090'
#############################
### Object storage ###
#############################
# This is an example for configuring Object Storage on GCP
# Replace this config with your chosen Object Storage provider as desired
gitlab_rails['object_store']['enabled'] = true
gitlab_rails['object_store']['connection'] = {
'provider' => 'Google',
'google_project' => '',
'google_json_key_location' => ''
}
gitlab_rails['object_store']['objects']['artifacts']['bucket'] = ""
gitlab_rails['object_store']['objects']['external_diffs']['bucket'] = ""
gitlab_rails['object_store']['objects']['lfs']['bucket'] = ""
gitlab_rails['object_store']['objects']['uploads']['bucket'] = ""
gitlab_rails['object_store']['objects']['packages']['bucket'] = ""
gitlab_rails['object_store']['objects']['dependency_proxy']['bucket'] = ""
gitlab_rails['object_store']['objects']['terraform_state']['bucket'] = ""
gitlab_rails['backup_upload_connection'] = {
'provider' => 'Google',
'google_project' => '',
'google_json_key_location' => ''
}
gitlab_rails['backup_upload_remote_directory'] = ""
## Uncomment and edit the following options if you have set up NFS
##
## Prevent GitLab from starting if NFS data mounts are not available
##
#high_availability['mountpoint'] = '/var/opt/gitlab/git-data'
##
## Ensure UIDs and GIDs match between servers for permissions via NFS
##
#user['uid'] = 9000
#user['gid'] = 9000
#web_server['uid'] = 9001
#web_server['gid'] = 9001
#registry['uid'] = 9002
#registry['gid'] = 9002
```
1. If you're using [Gitaly with TLS support](#gitaly-cluster-tls-support), make sure the
`git_data_dirs` entry is configured with `tls` instead of `tcp`:
```ruby
git_data_dirs({
"default" => {
"gitaly_address" => "tls://10.6.0.40:2305", # internal load balancer IP
"gitaly_token" => ''
}
})
```
1. Copy the cert into `/etc/gitlab/trusted-certs`:
```shell
sudo cp cert.pem /etc/gitlab/trusted-certs/
```
1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the first Omnibus node you configured and add or replace
the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.
1. To ensure database migrations are only run during reconfigure and not automatically on upgrade, run:
```shell
sudo touch /etc/gitlab/skip-auto-reconfigure
```
Only a single designated node should handle migrations as detailed in the
[GitLab Rails post-configuration](#gitlab-rails-post-configuration) section.
1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
1. [Enable incremental logging](#enable-incremental-logging), unless you are using [NFS](#configure-nfs-optional).
1. Run `sudo gitlab-rake gitlab:gitaly:check` to confirm the node can connect to Gitaly.
1. Tail the logs to see the requests:
```shell
sudo gitlab-ctl tail gitaly
```
1. Verify the GitLab services are running:
```shell
sudo gitlab-ctl status
```
The output should be similar to the following:
```plaintext
run: consul: (pid 4890) 8647s; run: log: (pid 29962) 79128s
run: gitlab-exporter: (pid 4902) 8647s; run: log: (pid 29913) 79134s
run: gitlab-workhorse: (pid 4904) 8646s; run: log: (pid 29713) 79155s
run: logrotate: (pid 12425) 1446s; run: log: (pid 29798) 79146s
run: nginx: (pid 4925) 8646s; run: log: (pid 29726) 79152s
run: node-exporter: (pid 4931) 8645s; run: log: (pid 29855) 79140s
run: puma: (pid 4936) 8645s; run: log: (pid 29656) 79161s
```
When you specify `https` in the `external_url`, as in the previous example,
GitLab expects that the SSL certificates are in `/etc/gitlab/ssl/`. If the
certificates aren't present, NGINX fails to start. For more information, see
the [HTTPS documentation](https://docs.gitlab.com/omnibus/settings/ssl.html).
### GitLab Rails post-configuration
1. Ensure that all migrations ran:
```shell
gitlab-rake gitlab:db:configure
```
If you encounter a `rake aborted!` error message stating that PgBouncer is
failing to connect to PostgreSQL, it may be that your PgBouncer node's IP
address is missing from PostgreSQL's `trust_auth_cidr_addresses` in `gitlab.rb`
on your database nodes. Before proceeding, see
[PgBouncer error `ERROR: pgbouncer cannot connect to server`](../postgresql/replication_and_failover.md#pgbouncer-error-error-pgbouncer-cannot-connect-to-server).
1. [Configure fast lookup of authorized SSH keys in the database](../operations/fast_ssh_key_lookup.md).
## Configure Prometheus
The Omnibus GitLab package can be used to configure a standalone Monitoring node
running [Prometheus](../monitoring/prometheus/index.md) and
[Grafana](../monitoring/performance/grafana_configuration.md):
1. SSH in to the Monitoring node.
1. [Download and install](https://about.gitlab.com/install/) the Omnibus GitLab
package of your choice. Be sure to follow _only_ installation steps 1 and 2
on the page.
1. Edit `/etc/gitlab/gitlab.rb` and add the contents:
```ruby
roles(['monitoring_role', 'consul_role'])
external_url 'http://gitlab.example.com'
# Prometheus
prometheus['listen_address'] = '0.0.0.0:9090'
prometheus['monitor_kubernetes'] = false
# Grafana
grafana['admin_password'] = ''
grafana['disable_login_form'] = false
# Enable service discovery for Prometheus
consul['monitoring_service_discovery'] = true
consul['configuration'] = {
retry_join: %w(10.6.0.11 10.6.0.12 10.6.0.13)
}
# Configure Prometheus to scrape services not covered by discovery
prometheus['scrape_configs'] = [
{
'job_name': 'pgbouncer',
'static_configs' => [
'targets' => [
"10.6.0.31:9188",
"10.6.0.32:9188",
"10.6.0.33:9188",
],
],
},
{
'job_name': 'praefect',
'static_configs' => [
'targets' => [
"10.6.0.131:9652",
"10.6.0.132:9652",
"10.6.0.133:9652",
],
],
},
]
# Nginx - For Grafana access
nginx['enable'] = true
```
1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
1. In the GitLab UI, set `admin/application_settings/metrics_and_profiling` > Metrics - Grafana to `/-/grafana` to
`http[s]:///-/grafana`.
1. Verify the GitLab services are running:
```shell
sudo gitlab-ctl status
```
The output should be similar to the following:
```plaintext
run: consul: (pid 31637) 17337s; run: log: (pid 29748) 78432s
run: grafana: (pid 31644) 17337s; run: log: (pid 29719) 78438s
run: logrotate: (pid 31809) 2936s; run: log: (pid 29581) 78462s
run: nginx: (pid 31665) 17335s; run: log: (pid 29556) 78468s
run: prometheus: (pid 31672) 17335s; run: log: (pid 29633) 78456s
```
## Configure the object storage
GitLab supports using an object storage service for holding numerous types of data.
It's recommended over [NFS](#configure-nfs-optional) and in general it's better
in larger setups as object storage is typically much more performant, reliable,
and scalable.
GitLab has been tested on a number of object storage providers:
- [Amazon S3](https://aws.amazon.com/s3/)
- [Google Cloud Storage](https://cloud.google.com/storage)
- [Digital Ocean Spaces](https://www.digitalocean.com/products/spaces)
- [Oracle Cloud Infrastructure](https://docs.oracle.com/en-us/iaas/Content/Object/Tasks/s3compatibleapi.htm)
- [OpenStack Swift (S3 compatibility mode)](https://docs.openstack.org/swift/latest/s3_compat.html)
- MinIO. We have [a guide to deploying this](https://docs.gitlab.com/charts/advanced/external-object-storage/minio.html) within our Helm Chart documentation.
There are two ways of specifying object storage configuration in GitLab:
- [Consolidated form](../object_storage.md#consolidated-object-storage-configuration): A single credential is
shared by all supported object types.
- [Storage-specific form](../object_storage.md#storage-specific-configuration): Every object defines its
own object storage [connection and configuration](../object_storage.md#connection-settings).
The consolidated form is used in the following examples when available.
NOTE:
When using the [storage-specific form](../object_storage.md#storage-specific-configuration)
in GitLab 14.x and earlier, you should enable [direct upload mode](../../development/uploads/index.md#direct-upload).
The previous [background upload](../../development/uploads/index.md#direct-upload) mode,
which was deprecated in 14.9, requires shared storage such as [NFS](#configure-nfs-optional).
Using separate buckets for each data type is the recommended approach for GitLab.
This ensures there are no collisions across the various types of data GitLab stores.
There are plans to [enable the use of a single bucket](https://gitlab.com/gitlab-org/gitlab/-/issues/292958)
in the future.
### Enable incremental logging
GitLab Runner returns job logs in chunks which Omnibus GitLab caches temporarily on disk in `/var/opt/gitlab/gitlab-ci/builds` by default, even when using consolidated object storage. With default configuration, this directory needs to be shared through NFS on any GitLab Rails and Sidekiq nodes.
While sharing the job logs through NFS is supported, it's recommended to avoid the need to use NFS by enabling [incremental logging](../job_logs.md#incremental-logging-architecture) (required when no NFS node has been deployed). Incremental logging uses Redis instead of disk space for temporary caching of job logs.
## Configure NFS (optional)
[Object storage](#configure-the-object-storage), along with [Gitaly](#configure-gitaly)
are recommended over NFS wherever possible for improved performance.
See how to [configure NFS](../nfs.md).
WARNING:
Engineering support for NFS for Git repositories is deprecated, and [technical support is scheduled to be unavailable](../nfs.md#gitaly-and-nfs-deprecation)
after the release of GitLab 15.6. No further enhancements are planned for this feature.
Read:
- [Gitaly and NFS Deprecation](../nfs.md#gitaly-and-nfs-deprecation).
- About the [correct mount options to use](../nfs.md#upgrade-to-gitaly-cluster-or-disable-caching-if-experiencing-data-loss).
## Configure Advanced Search
You can leverage Elasticsearch and [enable Advanced Search](../../integration/advanced_search/elasticsearch.md)
for faster, more advanced code search across your entire GitLab instance.
Elasticsearch cluster design and requirements are dependent on your specific
data. For recommended best practices about how to set up your Elasticsearch
cluster alongside your instance, read how to
[choose the optimal cluster configuration](../../integration/advanced_search/elasticsearch.md#guidance-on-choosing-optimal-cluster-configuration).
## Cloud Native Hybrid reference architecture with Helm Charts (alternative)
As an alternative approach, you can also run select components of GitLab as Cloud Native
in Kubernetes via our official [Helm Charts](https://docs.gitlab.com/charts/).
In this setup, we support running the equivalent of GitLab Rails and Sidekiq nodes
in a Kubernetes cluster, named Webservice and Sidekiq respectively. In addition,
the following other supporting services are supported: NGINX, Task Runner, Migrations,
Prometheus, and Grafana.
Hybrid installations leverage the benefits of both cloud native and traditional
compute deployments. With this, _stateless_ components can benefit from cloud native
workload management benefits while _stateful_ components are deployed in compute VMs
with Omnibus to benefit from increased permanence.
NOTE:
This is an **advanced** setup. Running services in Kubernetes is well known
to be complex. **This setup is only recommended** if you have strong working
knowledge and experience in Kubernetes. The rest of this
section assumes this.
NOTE:
**Gitaly Cluster is not supported to be run in Kubernetes**.
Refer to [epic 6127](https://gitlab.com/groups/gitlab-org/-/epics/6127) for more details.
### Cluster topology
The following tables and diagram detail the hybrid environment using the same formats
as the normal environment above.
First are the components that run in Kubernetes. The recommendation at this time is to
use Google Cloud's Kubernetes Engine (GKE) or AWS Elastic Kubernetes Service (EKS) and associated machine types, but the memory
and CPU requirements should translate to most other providers. We hope to update this in the
future with further specific cloud provider details.
| Service | Nodes | Configuration | GCP | AWS | Min Allocatable CPUs and Memory |
|-----------------------------------------------|-------|-------------------------|-----------------|--------------|---------------------------------|
| Webservice | 5 | 16 vCPU, 14.4 GB memory | `n1-highcpu-16` | `c5.4xlarge` | 79.5 vCPU, 62 GB memory |
| Sidekiq | 3 | 4 vCPU, 15 GB memory | `n1-standard-4` | `m5.xlarge` | 11.8 vCPU, 38.9 GB memory |
| Supporting services such as NGINX, Prometheus | 2 | 2 vCPU, 7.5 GB memory | `n1-standard-2` | `m5.large` | 3.9 vCPU, 11.8 GB memory |
- For this setup, we **recommend** and regularly [test](index.md#validation-and-test-results)
[Google Kubernetes Engine (GKE)](https://cloud.google.com/kubernetes-engine) and [Amazon Elastic Kubernetes Service (EKS)](https://aws.amazon.com/eks/). Other Kubernetes services may also work, but your mileage may vary.
- Nodes configuration is shown as it is forced to ensure pod vCPU / memory ratios and avoid scaling during **performance testing**.
- In production deployments, there is no need to assign pods to nodes. A minimum of three nodes in three different availability zones is strongly recommended to align with resilient cloud architecture practices.
Next are the backend components that run on static compute VMs via Omnibus (or External PaaS
services where applicable):
| Service | Nodes | Configuration | GCP | AWS |
|-------------------------------------------|-------|-----------------------|-----------------|--------------|
| Redis2 | 3 | 2 vCPU, 7.5 GB memory | `n1-standard-2` | `m5.large` |
| Consul1 + Sentinel2 | 3 | 2 vCPU, 1.8 GB memory | `n1-highcpu-2` | `c5.large` |
| PostgreSQL1 | 3 | 4 vCPU, 15 GB memory | `n1-standard-4` | `m5.xlarge` |
| PgBouncer1 | 3 | 2 vCPU, 1.8 GB memory | `n1-highcpu-2` | `c5.large` |
| Internal load balancing node3 | 1 | 2 vCPU, 1.8 GB memory | `n1-highcpu-2` | `c5.large` |
| Gitaly5 | 3 | 8 vCPU, 30 GB memory | `n1-standard-8` | `m5.2xlarge` |
| Praefect5 | 3 | 2 vCPU, 1.8 GB memory | `n1-highcpu-2` | `c5.large` |
| Praefect PostgreSQL1 | 1+ | 2 vCPU, 1.8 GB memory | `n1-highcpu-2` | `c5.large` |
| Object storage4 | - | - | - | - |
1. Can be optionally run on reputable third-party external PaaS PostgreSQL solutions. See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
- [Google Cloud SQL](https://cloud.google.com/sql/docs/postgres/high-availability#normal) and [Amazon RDS](https://aws.amazon.com/rds/) are known to work.
- [Google AlloyDB](https://cloud.google.com/alloydb) and [Amazon RDS Multi-AZ DB clusters](https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/multi-az-db-clusters-concepts.html) have not been tested and are not recommended. Both solutions are specifically not expected to work with GitLab Geo.
- [Amazon Aurora](https://aws.amazon.com/rds/aurora/) is **incompatible** with load balancing enabled by default in [14.4.0](../../update/index.md#1440).
- Consul is primarily used for Omnibus PostgreSQL high availability so can be ignored when using a PostgreSQL PaaS setup. However, Consul is also used optionally by Prometheus for Omnibus auto host discovery.
2. Can be optionally run on reputable third-party external PaaS Redis solutions. See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
- [Google Memorystore](https://cloud.google.com/memorystore) and [Amazon ElastiCache](https://aws.amazon.com/elasticache/) are known to work.
3. Can be optionally run on reputable third-party load balancing services (LB PaaS). See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
- [Google Cloud Load Balancing](https://cloud.google.com/load-balancing) and [Amazon Elastic Load Balancing](https://aws.amazon.com/elasticloadbalancing/) are known to work.
4. Should be run on reputable Cloud Provider or Self Managed solutions. More information can be found in the [Configure the object storage](#configure-the-object-storage) section.
5. Gitaly Cluster provides the benefits of fault tolerance, but comes with additional complexity of setup and management. Review the existing [technical limitations and considerations before deploying Gitaly Cluster](../gitaly/index.md#before-deploying-gitaly-cluster). If you want sharded Gitaly, use the same specs listed above for `Gitaly`.
NOTE:
For all PaaS solutions that involve configuring instances, it is strongly recommended to implement a minimum of three nodes in three different availability zones to align with resilient cloud architecture practices.
```plantuml
@startuml 5k
skinparam linetype ortho
card "Kubernetes via Helm Charts" as kubernetes {
card "**External Load Balancer**" as elb #6a9be7
together {
collections "**Webservice** x5" as gitlab #32CD32
collections "**Sidekiq** x3" as sidekiq #ff8dd1
}
card "**Supporting Services** x2" as support
}
card "**Internal Load Balancer**" as ilb #9370DB
collections "**Consul** x3" as consul #e76a9b
card "Gitaly Cluster" as gitaly_cluster {
collections "**Praefect** x3" as praefect #FF8C00
collections "**Gitaly** x3" as gitaly #FF8C00
card "**Praefect PostgreSQL***\n//Non fault-tolerant//" as praefect_postgres #FF8C00
praefect -[#FF8C00]-> gitaly
praefect -[#FF8C00]> praefect_postgres
}
card "Database" as database {
collections "**PGBouncer** x3" as pgbouncer #4EA7FF
card "**PostgreSQL** (Primary)" as postgres_primary #4EA7FF
collections "**PostgreSQL** (Secondary) x2" as postgres_secondary #4EA7FF
pgbouncer -[#4EA7FF]-> postgres_primary
postgres_primary .[#4EA7FF]> postgres_secondary
}
card "redis" as redis {
collections "**Redis** x3" as redis_nodes #FF6347
}
cloud "**Object Storage**" as object_storage #white
elb -[#6a9be7]-> gitlab
elb -[hidden]-> sidekiq
elb -[hidden]-> support
gitlab -[#32CD32]--> ilb
gitlab -[#32CD32]r--> object_storage
gitlab -[#32CD32,norank]----> redis
gitlab -[#32CD32]----> database
sidekiq -[#ff8dd1]--> ilb
sidekiq -[#ff8dd1]r--> object_storage
sidekiq -[#ff8dd1,norank]----> redis
sidekiq .[#ff8dd1]----> database
ilb -[#9370DB]--> gitaly_cluster
ilb -[#9370DB]--> database
ilb -[hidden,norank]--> redis
consul .[#e76a9b]--> database
consul .[#e76a9b,norank]--> gitaly_cluster
consul .[#e76a9b]--> redis
@enduml
```
### Resource usage settings
The following formulas help when calculating how many pods may be deployed within resource constraints.
The [5k reference architecture example values file](https://gitlab.com/gitlab-org/charts/gitlab/-/blob/master/examples/ref/5k.yaml)
documents how to apply the calculated configuration to the Helm Chart.
#### Webservice
Webservice pods typically need about 1 CPU and 1.25 GB of memory _per worker_.
Each Webservice pod consumes roughly 4 CPUs and 5 GB of memory using
the [recommended topology](#cluster-topology) because four worker processes
are created by default and each pod has other small processes running.
For 5,000 users we recommend a total Puma worker count of around 40.
With the [provided recommendations](#cluster-topology) this allows the deployment of up to 10
Webservice pods with 4 workers per pod and 2 pods per node. Expand available resources using
the ratio of 1 CPU to 1.25 GB of memory _per each worker process_ for each additional
Webservice pod.
For further information on resource usage, see the [Webservice resources](https://docs.gitlab.com/charts/charts/gitlab/webservice/#resources).
#### Sidekiq
Sidekiq pods should generally have 0.9 CPU and 2 GB of memory.
[The provided starting point](#cluster-topology) allows the deployment of up to
8 Sidekiq pods. Expand available resources using the 0.9 CPU to 2 GB memory
ratio for each additional pod.
For further information on resource usage, see the [Sidekiq resources](https://docs.gitlab.com/charts/charts/gitlab/sidekiq/#resources).
### Supporting
The Supporting Node Pool is designed to house all supporting deployments that don't need to be
on the Webservice and Sidekiq pools.
This includes various deployments related to the Cloud Provider's implementation and supporting
GitLab deployments such as NGINX or [GitLab Shell](https://docs.gitlab.com/charts/charts/gitlab/gitlab-shell/).
If you wish to make any additional deployments, such as for Monitoring, it's recommended
to deploy these in this pool where possible and not in the Webservice or Sidekiq pools, as the Supporting pool has been designed
specifically to accommodate several additional deployments. However, if your deployments don't fit into the
pool as given, you can increase the node pool accordingly.