# Use this hook to configure devise mailer, warden hooks and so forth. The first
# four configuration values can also be set straight in your models.
Devise.setup do |config|
  # ==> Mailer Configuration
  # Configure the e-mail address which will be shown in Devise::Mailer,
  # note that it will be overwritten if you use your own mailer class with default "from" parameter.
  config.mailer_sender = Gitlab.config.gitlab.email_from


  # Configure the class responsible to send e-mails.
  # config.mailer = "Devise::Mailer"

  # ==> ORM configuration
  # Load and configure the ORM. Supports :active_record (default) and
  # :mongoid (bson_ext recommended) by default. Other ORMs may be
  # available as additional gems.
  require 'devise/orm/active_record'

  # ==> Configuration for any authentication mechanism
  # Configure which keys are used when authenticating a user. The default is
  # just :email. You can configure it to use [:username, :subdomain], so for
  # authenticating a user, both parameters are required. Remember that those
  # parameters are used only when authenticating and not when retrieving from
  # session. If you need permissions, you should implement that in a before filter.
  # You can also supply a hash where the value is a boolean determining whether
  # or not authentication should be aborted when the value is not present.
  config.authentication_keys = [ :login ]

  # Configure parameters from the request object used for authentication. Each entry
  # given should be a request method and it will automatically be passed to the
  # find_for_authentication method and considered in your model lookup. For instance,
  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
  # The same considerations mentioned for authentication_keys also apply to request_keys.
  # config.request_keys = []

  # Configure which authentication keys should be case-insensitive.
  # These keys will be downcased upon creating or modifying a user and when used
  # to authenticate or find a user. Default is :email.
  config.case_insensitive_keys = [ :email ]

  # Configure which authentication keys should have whitespace stripped.
  # These keys will have whitespace before and after removed upon creating or
  # modifying a user and when used to authenticate or find a user. Default is :email.
  config.strip_whitespace_keys = [ :email ]

  # Tell if authentication through request.params is enabled. True by default.
  # config.params_authenticatable = true

  # Tell if authentication through HTTP Basic Auth is enabled. False by default.
  # config.http_authenticatable = false

  # If http headers should be returned for AJAX requests. True by default.
  # config.http_authenticatable_on_xhr = true

  # The realm used in Http Basic Authentication. "Application" by default.
  # config.http_authentication_realm = "Application"

  config.reconfirmable = true

  # It will change confirmation, password recovery and other workflows
  # to behave the same regardless if the e-mail provided was right or wrong.
  # Does not affect registerable.
  # config.paranoid = true

  # ==> Configuration for :database_authenticatable
  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
  # using other encryptors, it sets how many times you want the password re-encrypted.
  #
  # Limiting the stretches to just one in testing will increase the performance of
  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
  # a value less than 10 in other environments.
  config.stretches = Rails.env.test? ? 1 : 10

  # Setup a pepper to generate the encrypted password.
  # config.pepper = "2ef62d549c4ff98a5d3e0ba211e72cff592060247e3bbbb9f499af1222f876f53d39b39b823132affb32858168c79c1d7741d26499901b63c6030a42129924ef"

  # ==> Configuration for :confirmable
  # The time you want to give a user to confirm their account. During this time
  # they will be able to access your application without confirming. Default is 0.days
  # When allow_unconfirmed_access_for is zero, the user won't be able to sign in without confirming.
  # You can use this to let your user access some features of your application
  # without confirming the account, but blocking it after a certain period
  # (ie 2 days).
  # config.allow_unconfirmed_access_for = 2.days

  # Defines which key will be used when confirming an account
  # config.confirmation_keys = [ :email ]

  # ==> Configuration for :rememberable
  # The time the user will be remembered without asking for credentials again.
  # config.remember_for = 2.weeks

  # If true, a valid remember token can be re-used between multiple browsers.
  # config.remember_across_browsers = true

  # If true, extends the user's remember period when remembered via cookie.
  # config.extend_remember_period = false

  # Options to be passed to the created cookie. For instance, you can set
  # secure: true in order to force SSL only cookies.
  # config.cookie_options = {}

  # ==> Configuration for :validatable
  # Range for password length. Default is 6..128.
  config.password_length = 8..128

  # Email regex used to validate email formats. It simply asserts that
  # an one (and only one) @ exists in the given string. This is mainly
  # to give user feedback and not to assert the e-mail validity.
  # config.email_regexp = /\A[^@]+@[^@]+\z/

  # ==> Configuration for :timeoutable
  # The time you want to timeout the user session without activity. After this
  # time the user will be asked for credentials again. Default is 30 minutes.
  # config.timeout_in = 30.minutes

  # ==> Configuration for :lockable
  # Defines which strategy will be used to lock an account.
  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
  # :none            = No lock strategy. You should handle locking by yourself.
  config.lock_strategy = :failed_attempts

  # Defines which key will be used when locking and unlocking an account
  # config.unlock_keys = [ :email ]

  # Defines which strategy will be used to unlock an account.
  # :email = Sends an unlock link to the user email
  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
  # :both  = Enables both strategies
  # :none  = No unlock strategy. You should handle unlocking by yourself.
  config.unlock_strategy = :time

  # Number of authentication tries before locking an account if lock_strategy
  # is failed attempts.
  config.maximum_attempts = 10

  # Time interval to unlock the account if :time is enabled as unlock_strategy.
  config.unlock_in = 10.minutes

  # ==> Configuration for :recoverable
  #
  # Defines which key will be used when recovering the password for an account
  # config.reset_password_keys = [ :email ]

  # Time interval you can reset your password with a reset password key.
  # Don't put a too small interval or your users won't have the time to
  # change their passwords.
  config.reset_password_within = 2.hours

  # ==> Configuration for :encryptable
  # Allow you to use another encryption algorithm besides bcrypt (default). You can use
  # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
  # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
  # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
  # REST_AUTH_SITE_KEY to pepper)
  # config.encryptor = :sha512

  # ==> Configuration for :token_authenticatable
  # Defines name of the authentication token params key
  config.token_authentication_key = :private_token

  # Authentication through token does not store user in session and needs
  # to be supplied on each request. Useful if you are using the token as API token.
  config.skip_session_storage << :token_auth

  # ==> Scopes configuration
  # Turn scoped views on. Before rendering "sessions/new", it will first check for
  # "users/sessions/new". It's turned off by default because it's slower if you
  # are using only default views.
  # config.scoped_views = false

  # Configure the default scope given to Warden. By default it's the first
  # devise role declared in your routes (usually :user).
  # config.default_scope = :user

  # Configure sign_out behavior.
  # Sign_out action can be scoped (i.e. /users/sign_out affects only :user scope).
  # The default is true, which means any logout action will sign out all active scopes.
  # config.sign_out_all_scopes = true

  # ==> Navigation configuration
  # Lists the formats that should be treated as navigational. Formats like
  # :html, should redirect to the sign in page when the user does not have
  # access, but formats like :xml or :json, should return 401.
  #
  # If you have any extra navigational formats, like :iphone or :mobile, you
  # should add them to the navigational formats lists.
  #
  # The :"*/*" and "*/*" formats below is required to match Internet
  # Explorer requests.
  # config.navigational_formats = [:"*/*", "*/*", :html]

  # The default HTTP method used to sign out a resource. Default is :delete.
  config.sign_out_via = :delete

  # ==> OmniAuth
  # To configure a new OmniAuth provider copy and edit omniauth.rb.sample
  # selecting the provider you require.
  # Check the wiki for more information on setting up on your models

  # ==> Warden configuration
  # If you want to use other strategies, that are not supported by Devise, or
  # change the failure app, you can configure them inside the config.warden block.
  #
  # config.warden do |manager|
  #   manager.failure_app   = AnotherApp
  #   manager.intercept_401 = false
  #   manager.default_strategies(scope: :user).unshift :some_external_strategy
  # end

  if Gitlab.config.ldap.enabled
    if Gitlab.config.ldap.allow_username_or_email_login
      email_stripping_proc = ->(name) {name.gsub(/@.*$/,'')}
    else
      email_stripping_proc = ->(name) {name}
    end

    config.omniauth :ldap,
      host:     Gitlab.config.ldap['host'],
      base:     Gitlab.config.ldap['base'],
      uid:      Gitlab.config.ldap['uid'],
      port:     Gitlab.config.ldap['port'],
      method:   Gitlab.config.ldap['method'],
      bind_dn:  Gitlab.config.ldap['bind_dn'],
      password: Gitlab.config.ldap['password'],
      name_proc: email_stripping_proc
  end

  Gitlab.config.omniauth.providers.each do |provider|
    provider_arguments = []

    %w[app_id app_secret].each do |argument|
      provider_arguments << provider[argument] if provider[argument]
    end

    case provider['args']
    when Array
      # An Array from the configuration will be expanded.
      provider_arguments.concat provider['args']
    when Hash
      # A Hash from the configuration will be passed as is.
      provider_arguments << provider['args']
    end

    config.omniauth provider['name'].to_sym, *provider_arguments
  end
end