gitlab-org--gitlab-foss/doc/administration/reply_by_email.md
Achilleas Pipinellis ca63a05873 Merge branch 'patch-16' into 'master'
add Microsoft Exchange reply by email details

Closes 

See merge request 
2017-03-03 21:21:38 +00:00

13 KiB

Reply by email

GitLab can be set up to allow users to comment on issues and merge requests by replying to notification emails.

Requirement

Reply by email requires an IMAP-enabled email account. GitLab allows you to use three strategies for this feature:

  • using email sub-addressing
  • using a dedicated email address
  • using a catch-all mailbox

Email sub-addressing

If your provider or server supports email sub-addressing, we recommend using it. Some features (e.g. create new issue via email) only work with sub-addressing.

Sub-addressing is a feature where any email to user+some_arbitrary_tag@example.com will end up in the mailbox for user@example.com, and is supported by providers such as Gmail, Google Apps, Yahoo! Mail, Outlook.com and iCloud, as well as the Postfix mail server which you can run on-premises.

Dedicated email address

This solution is really simple to set up: you just have to create an email address dedicated to receive your users' replies to GitLab notifications.

Catch-all mailbox

A catch-all mailbox for a domain will "catch all" the emails addressed to the domain that do not exist in the mail server.

How it works?

1. GitLab sends a notification email

When GitLab sends a notification and Reply by email is enabled, the Reply-To header is set to the address defined in your GitLab configuration, with the %{key} placeholder (if present) replaced by a specific "reply key". In addition, this "reply key" is also added to the References header.

2. You reply to the notification email

When you reply to the notification email, your email client will:

  • send the email to the Reply-To address it got from the notification email
  • set the In-Reply-To header to the value of the Message-ID header from the notification email
  • set the References header to the value of the Message-ID plus the value of the notification email's References header.

3. GitLab receives your reply to the notification email

When GitLab receives your reply, it will look for the "reply key" in the following headers, in this order:

  1. the To header
  2. the References header

If it finds a reply key, it will be able to leave your reply as a comment on the entity the notification was about (issue, merge request, commit...).

For more details about the Message-ID, In-Reply-To, and References headers, please consult RFC 5322.

Set it up

If you want to use Gmail / Google Apps with Reply by email, make sure you have IMAP access enabled and allowed less secure apps to access the account or turn-on 2-step validation and use an application password.

To set up a basic Postfix mail server with IMAP access on Ubuntu, follow the Postfix setup documentation.

Omnibus package installations

  1. Find the incoming_email section in /etc/gitlab/gitlab.rb, enable the feature and fill in the details for your specific IMAP server and email account:

    # Configuration for Postfix mail server, assumes mailbox incoming@gitlab.example.com
    gitlab_rails['incoming_email_enabled'] = true
    
    # The email address including the `%{key}` placeholder that will be replaced to reference the item being replied to.
    # The placeholder can be omitted but if present, it must appear in the "user" part of the address (before the `@`).
    gitlab_rails['incoming_email_address'] = "incoming+%{key}@gitlab.example.com"
    
    # Email account username
    # With third party providers, this is usually the full email address.
    # With self-hosted email servers, this is usually the user part of the email address.
    gitlab_rails['incoming_email_email'] = "incoming"
    # Email account password
    gitlab_rails['incoming_email_password'] = "[REDACTED]"
    
    # IMAP server host
    gitlab_rails['incoming_email_host'] = "gitlab.example.com"
    # IMAP server port
    gitlab_rails['incoming_email_port'] = 143
    # Whether the IMAP server uses SSL
    gitlab_rails['incoming_email_ssl'] = false
    # Whether the IMAP server uses StartTLS
    gitlab_rails['incoming_email_start_tls'] = false
    
    # The mailbox where incoming mail will end up. Usually "inbox".
    gitlab_rails['incoming_email_mailbox_name'] = "inbox"
    # The IDLE command timeout.
    gitlab_rails['incoming_email_idle_timeout'] = 60
    
    # Configuration for Gmail / Google Apps, assumes mailbox gitlab-incoming@gmail.com
    gitlab_rails['incoming_email_enabled'] = true
    
    # The email address including the `%{key}` placeholder that will be replaced to reference the item being replied to.
    # The placeholder can be omitted but if present, it must appear in the "user" part of the address (before the `@`).
    gitlab_rails['incoming_email_address'] = "gitlab-incoming+%{key}@gmail.com"
    
    # Email account username
    # With third party providers, this is usually the full email address.
    # With self-hosted email servers, this is usually the user part of the email address.
    gitlab_rails['incoming_email_email'] = "gitlab-incoming@gmail.com"
    # Email account password
    gitlab_rails['incoming_email_password'] = "[REDACTED]"
    
    # IMAP server host
    gitlab_rails['incoming_email_host'] = "imap.gmail.com"
    # IMAP server port
    gitlab_rails['incoming_email_port'] = 993
    # Whether the IMAP server uses SSL
    gitlab_rails['incoming_email_ssl'] = true
    # Whether the IMAP server uses StartTLS
    gitlab_rails['incoming_email_start_tls'] = false
    
    # The mailbox where incoming mail will end up. Usually "inbox".
    gitlab_rails['incoming_email_mailbox_name'] = "inbox"
    # The IDLE command timeout.
    gitlab_rails['incoming_email_idle_timeout'] = 60
    
    # Configuration for Microsoft Exchange mail server w/ IMAP enabled, assumes mailbox incoming@exchange.example.com
    gitlab_rails['incoming_email_enabled'] = true
    
    # The email address replies are sent to - Exchange does not support sub-addressing so %{key} is not used here
    gitlab_rails['incoming_email_address'] = "incoming@exchange.example.com"
    
    # Email account username
    # Typically this is the userPrincipalName (UPN)
    gitlab_rails['incoming_email_email'] = "incoming@ad-domain.example.com"
    # Email account password
    gitlab_rails['incoming_email_password'] = "[REDACTED]"
    
    # IMAP server host
    gitlab_rails['incoming_email_host'] = "exchange.example.com"
    # IMAP server port
    gitlab_rails['incoming_email_port'] = 993
    # Whether the IMAP server uses SSL
    gitlab_rails['incoming_email_ssl'] = true
    
  2. Reconfigure GitLab for the changes to take effect:

    sudo gitlab-ctl reconfigure
    
  3. Verify that everything is configured correctly:

    sudo gitlab-rake gitlab:incoming_email:check
    
  4. Reply by email should now be working.

Installations from source

  1. Go to the GitLab installation directory:

    cd /home/git/gitlab
    
  2. Find the incoming_email section in config/gitlab.yml, enable the feature and fill in the details for your specific IMAP server and email account:

    sudo editor config/gitlab.yml
    
    # Configuration for Postfix mail server, assumes mailbox incoming@gitlab.example.com
    incoming_email:
      enabled: true
    
      # The email address including the `%{key}` placeholder that will be replaced to reference the item being replied to.
      # The placeholder can be omitted but if present, it must appear in the "user" part of the address (before the `@`).
      address: "incoming+%{key}@gitlab.example.com"
    
      # Email account username
      # With third party providers, this is usually the full email address.
      # With self-hosted email servers, this is usually the user part of the email address.
      user: "incoming"
      # Email account password
      password: "[REDACTED]"
    
      # IMAP server host
      host: "gitlab.example.com"
      # IMAP server port
      port: 143
      # Whether the IMAP server uses SSL
      ssl: false
      # Whether the IMAP server uses StartTLS
      start_tls: false
    
      # The mailbox where incoming mail will end up. Usually "inbox".
      mailbox: "inbox"
      # The IDLE command timeout.
      idle_timeout: 60
    
    # Configuration for Gmail / Google Apps, assumes mailbox gitlab-incoming@gmail.com
    incoming_email:
      enabled: true
    
      # The email address including the `%{key}` placeholder that will be replaced to reference the item being replied to.
      # The placeholder can be omitted but if present, it must appear in the "user" part of the address (before the `@`).
      address: "gitlab-incoming+%{key}@gmail.com"
    
      # Email account username
      # With third party providers, this is usually the full email address.
      # With self-hosted email servers, this is usually the user part of the email address.
      user: "gitlab-incoming@gmail.com"
      # Email account password
      password: "[REDACTED]"
    
      # IMAP server host
      host: "imap.gmail.com"
      # IMAP server port
      port: 993
      # Whether the IMAP server uses SSL
      ssl: true
      # Whether the IMAP server uses StartTLS
      start_tls: false
    
      # The mailbox where incoming mail will end up. Usually "inbox".
      mailbox: "inbox"
      # The IDLE command timeout.
      idle_timeout: 60
    
    # Configuration for Microsoft Exchange mail server w/ IMAP enabled, assumes mailbox incoming@exchange.example.com
    incoming_email:
      enabled: true
    
      # The email address replies are sent to - Exchange does not support sub-addressing so %{key} is not used here
      address: "incoming@exchange.example.com"
    
      # Email account username
      # Typically this is the userPrincipalName (UPN)
      user: "incoming@ad-domain.example.com"
      # Email account password
      password: "[REDACTED]"
    
      # IMAP server host
      host: "exchange.example.com"
      # IMAP server port
      port: 993
      # Whether the IMAP server uses SSL
      ssl: true
      # Whether the IMAP server uses StartTLS
      start_tls: false
    
      # The mailbox where incoming mail will end up. Usually "inbox".
      mailbox: "inbox"
      # The IDLE command timeout.
      idle_timeout: 60
    
  3. Enable mail_room in the init script at /etc/default/gitlab:

    sudo mkdir -p /etc/default
    echo 'mail_room_enabled=true' | sudo tee -a /etc/default/gitlab
    
  4. Restart GitLab:

    sudo service gitlab restart
    
  5. Verify that everything is configured correctly:

    sudo -u git -H bundle exec rake gitlab:incoming_email:check RAILS_ENV=production
    
  6. Reply by email should now be working.

Development

  1. Go to the GitLab installation directory.

  2. Find the incoming_email section in config/gitlab.yml, enable the feature and fill in the details for your specific IMAP server and email account:

    # Configuration for Gmail / Google Apps, assumes mailbox gitlab-incoming@gmail.com
    incoming_email:
      enabled: true
    
      # The email address including the `%{key}` placeholder that will be replaced to reference the item being replied to.
      # The placeholder can be omitted but if present, it must appear in the "user" part of the address (before the `@`).
      address: "gitlab-incoming+%{key}@gmail.com"
    
      # Email account username
      # With third party providers, this is usually the full email address.
      # With self-hosted email servers, this is usually the user part of the email address.
      user: "gitlab-incoming@gmail.com"
      # Email account password
      password: "[REDACTED]"
    
      # IMAP server host
      host: "imap.gmail.com"
      # IMAP server port
      port: 993
      # Whether the IMAP server uses SSL
      ssl: true
      # Whether the IMAP server uses StartTLS
      start_tls: false
    
      # The mailbox where incoming mail will end up. Usually "inbox".
      mailbox: "inbox"
      # The IDLE command timeout.
      idle_timeout: 60
    

    As mentioned, the part after + is ignored, and this will end up in the mailbox for gitlab-incoming@gmail.com.

  3. Uncomment the mail_room line in your Procfile:

    mail_room: bundle exec mail_room -q -c config/mail_room.yml
    
  4. Restart GitLab:

    bundle exec foreman start
    
  5. Verify that everything is configured correctly:

    bundle exec rake gitlab:incoming_email:check RAILS_ENV=development
    
  6. Reply by email should now be working.