gitlab-org--gitlab-foss/doc/university/high-availability/aws
2018-11-20 11:12:15 +00:00
..
img Compress all PNG images under doc/ 2018-08-27 15:52:03 +02:00
README.md Fixes to AWS documentation 2018-11-20 11:12:15 +00:00

comments
false

Note

: We do not recommend using the AWS Elastic File System (EFS), as it can result in significantly degraded performance.

High Availability on AWS

GitLab on AWS can leverage many of the services that are already configurable with High Availability. These services have a lot of flexibility and are able to adapt to most companies, best of all is the ability to automate both vertical and horizontal scaling.

In this article we'll go through a basic HA setup where we'll start by configuring our Virtual Private Cloud and subnets to later integrate services such as RDS for our database server and ElastiCache as a Redis cluster to finally manage them within an auto scaling group with custom scaling policies.


Where to Start

Login to your AWS account through the My Account dropdown on https://aws.amazon.com or through the URI assigned to your team such as https://myteam.signin.aws.amazon.com/console/. You'll start on the Amazon Web Services console from where we can choose all of the services we'll be using to configure our cloud infrastructure.

Reference Architecture

Reference Architecture


Network

We'll start by creating a VPC for our GitLab cloud infrastructure, then we can create subnets to have public and private instances in at least two AZs. Public subnets will require a Route Table keep an associated Internet Gateway.

VPC

Start by looking for the VPC option on the web console. Now create a new VPC. We can use 10.0.0.0/16 for the CIDR block and leave tenancy as default if we don't require dedicated hardware.

New VPC

If you're setting up the Elastic File System service then select the VPC and from the Actions dropdown choose Edit DNS Hostnames and select Yes.

Subnet

Now let's create some subnets in different Availability Zones. Make sure that each subnet is associated to the VPC we just created, that it has a distinct VPC and lastly that CIDR blocks don't overlap. This will also allow us to enable multi-AZ for redundancy.

We will create private and public subnets to match load balancers and RDS instances as well.

Subnet Creation

The subnets are listed with their name, AZ and CIDR block:

  • gitlab-public-10.0.0.0 - us-west-2a - 10.0.0.0
  • gitlab-private-10.0.1.0 - us-west-2a - 10.0.1.0
  • gitlab-public-10.0.2.0 - us-west-2b - 10.0.2.0
  • gitlab-private-10.0.3.0 - us-west-2b - 10.0.3.0

Route Table

Up to now all our subnets are private. We need to create a Route Table to associate an Internet Gateway. On the same VPC dashboard choose Route Tables on the left column and give it a name and associate it to our newly created VPC.

Route Table

Internet Gateway

Now still on the same dashboard head over to Internet Gateways and create a new one. After its created pres on the Attach to VPC button and select our VPC.

Internet Gateway

Configure Subnets

Go back to the Router Tables screen and select the newly created one, press the Routes tab on the bottom section and edit it. We need to add a new target which will be our Internet Gateway and have it receive traffic from any destination.

Subnet Config

Before leaving this screen select the next tab to the right which is Subnet Associations and add our public subnets. If you followed our naming convention they should be easy to find.


Database with RDS

For our database server we will use Amazon RDS which offers Multi-AZ for redundancy. Let's start by creating a subnet group and then we'll create the actual RDS instance.

Subnet Group

From the RDS dashboard select Subnet Groups. Lets select our VPC from the VPC ID dropdown and at the bottom we can add our private subnets.

Subnet Group

RDS

Select the RDS service from the Database section and create a new PostgreSQL instance. After choosing between a Production or Development instance we'll start with the actual configuration. On the image below we have the settings for this article but note the following two options which are of particular interest for HA:

  1. Multi-AZ-Deployment is recommended as redundancy. Read more at High Availability (Multi-AZ)
  2. While we chose a General Purpose (SSD) for this article a Provisioned IOPS (SSD) is best suited for HA. Read more about it at Storage for Amazon RDS

RDS Instance Specs

The rest of the setting on this page request a DB identifier, username, and a master password. We've chosen to use gitlab-ha, gitlab and a very secure password respectively. Keep these in hand for later.

Network and Security

Make sure to choose our gitlab VPC, our subnet group, not have it public, and to leave it to create a new security group. The only additional change which will be helpful is the database name for which we can use gitlabhq_production.


ElastiCache

EC is an in-memory hosted caching solution. Redis maintains its own persistence and is used for certain types of application.

Let's choose the ElastiCache service in the Database section from our AWS console. Now let's create a cache subnet group which will be very similar to the RDS subnet group. Make sure to select our VPC and its private subnets.

ElastiCache

Now press the Launch a Cache Cluster and choose Redis for our DB engine. You'll be able to configure details such as replication, Multi-AZ and node types. The second section will allow us to choose our subnet and security group and

Redis Cluster details

Redis Network


Network File System

GitLab requires a shared filesystem such as NFS. The file share(s) will be mounted on all application servers. There are a variety of ways to build an NFS server on AWS.

One option is to use a third-party AMI that offers NFS as a service. A search for 'NFS' in the AWS Marketplace shows options such as NetApp, SoftNAS and others.

Another option is to build a simple NFS server using a vanilla Linux server backed by AWS Elastic Block Storage (EBS).

Note: GitLab does not recommend using AWS Elastic File System (EFS). See details in High Availability NFS documentation


Initiate AMI

We are going to launch an EC2 instance and bake an image so that we can later use it for auto scaling. We'll also take this opportunity to add an extension to our RDS through this temporary EC2 instance.

EC2 Instance

Look for the EC2 option and choose to create an instance. We'll need at least a t2.medium type and for this article we'll choose an Ubuntu 14.04 HVM 64-bit. In the Configure Instance section choose our GitLab VPC and a public subnet. I'd choose at least 10GB of storage.

In the security group we'll create a new one considering that we need to SSH into the instance and also try it out through http. So let's add the http traffic from anywhere and name it something such as gitlab-ec2-security-group.

While we wait for it to launch we can allocate an Elastic IP and associate it with our new EC2 instance.

RDS and Redis Security Group

After the instance is being created we will navigate to our EC2 security groups and add a small change for our EC2 instances to be able to connect to RDS. First copy the security group name we just defined, namely gitlab-ec2-security-group, and edit select the RDS security group and edit the inbound rules. Choose the rule type to be PostgreSQL and paste the name under source.

RDS security group

Similar to the above we'll jump to the gitlab-ec2-security-group group and add a custom TCP rule for port 6379 accessible within itself.

Install GitLab

To connect through SSH you will need to have the pem file which you chose available and with the correct permissions such as 400.

After accessing your server don't forget to update and upgrade your packages.

sudo apt-get update && sudo apt-get upgrade -y

Then follow installation instructions from GitLab, but before running reconfigure we need to make sure all our services are tied down so just leave the reconfigure command until after we edit our gitlab.rb file.

Extension for PostgreSQL

Connect to your new RDS instance to verify access and to install a required extension. We can find the host or endpoint by selecting the instance and we just created and after the details drop down we'll find it labeled as 'Endpoint'; do remember not to include the colon and port number.

sudo /opt/gitlab/embedded/bin/psql -U gitlab -h <rds-endpoint> -d gitlabhq_production
psql (9.4.7)
Type "help" for help.

gitlab=# CREATE EXTENSION pg_trgm;
gitlab=# \q

Configure GitLab

While connected to your server edit the gitlab.rb file at /etc/gitlab/gitlab.rb find the external_url 'http://gitlab.example.com' option and change it to the domain you will be using or the public IP address of the current instance to test the configuration.

For a more detailed description about configuring GitLab read Configuring GitLab for HA

Now look for the GitLab database settings and uncomment as necessary. In our current case we'll specify the adapter, encoding, host, db name, username, and password.

gitlab_rails['db_adapter'] = "postgresql"
gitlab_rails['db_encoding'] = "unicode"    
gitlab_rails['db_database'] = "gitlabhq_production"   
gitlab_rails['db_username'] = "gitlab"
gitlab_rails['db_password'] = "mypassword"
gitlab_rails['db_host'] = "<rds-endpoint>"

Next, we only need to configure the Redis section by adding the host and uncommenting the port.

The last configuration step is to change the default file locations to make the EFS integration easier to manage.

gitlab_rails['redis_host'] = "<redis-endpoint>"
gitlab_rails['redis_port'] = 6379

Finally, run reconfigure. You might find it useful to run a check and a service status to make sure everything has been set up correctly.

sudo gitlab-ctl reconfigure  
sudo gitlab-rake gitlab:check  
sudo gitlab-ctl status  

If everything looks good copy the Elastic IP over to your browser and test the instance manually.

AMI

After you finish testing your EC2 instance go back to its dashboard and while the instance is selected press on the Actions dropdown to choose Image -> Create an Image. Give it a name and description and confirm.


Load Balancer

On the same dashboard look for Load Balancer on the left column and press the Create button. Choose a classic Load Balancer, our gitlab VPC, not internal and make sure its listening for HTTP and HTTPS on port 80.

Here is a tricky part though, when adding subnets we need to associate public subnets instead of the private ones where our instances will actually live.

On the security group section let's create a new one named gitlab-loadbalancer-sec-group and allow both HTTP ad HTTPS traffic from anywhere.

The Load Balancer Health will allow us to indicate where to ping and what makes up a healthy or unhealthy instance.

We won't add the instance on the next session because we'll destroy it momentarily as we'll be using the image we were creating. We will keep the Enable Cross-Zone and Enable Connection Draining active.

After we finish creating the Load Balancer we can revisit our Security Groups to improve access only through the ELB and any other requirement you might have.


Auto Scaling Group

Our AMI should be done by now so we can start working on our Auto Scaling Group.

This option is also available through the EC2 dashboard on the left sidebar. Press on the create button. Select the new image on My AMIs and give it a t2.medium size. To be able to use Elastic File System we need to add a script to mount EFS automatically at launch. We'll do this at the Advanced Details section where we have a User Data text area that allows us to add a lot of custom configurations which allows you to add a custom script for when launching an instance. Let's add the following script to the User Data section:

#cloud-config
package_upgrade: true
packages:
- nfs-common
runcmd:
- mkdir -p /gitlab-data
- chown ec2-user:ec2-user /gitlab-data
- echo "$(curl --silent http://169.254.169.254/latest/meta-data/placement/availability-zone).file-system-id.aws-region.amazonaws.com:/ /gitlab-data nfs defaults,vers=4.1 0 0" >> /etc/fstab
- mount -a -t nfs
- sudo gitlab-ctl reconfigure

On the security group section we can choose our existing gitlab-ec2-security-group group which has already been tested.

After this is launched we are able to start creating our Auto Scaling Group. Start by giving it a name and assigning it our VPC and private subnets. We also want to always start with two instances and if you scroll down to Advanced Details we can choose to receive traffic from ELBs. Let's enable that option and select our ELB. We also want to use the ELB's health check.

Auto scaling

Policies

This is the really great part of Auto Scaling, we get to choose when AWS launches new instances and when it removes them. For this group we'll scale between 2 and 4 instances where one instance will be added if CPU utilization is greater than 60% and one instance is removed if it falls to less than 45%. Here are the complete policies:

Policies

You'll notice that after we save this AWS starts launching our two instances in different AZs and without a public IP which is exactly what we where aiming for.


Final Thoughts

After you're done with the policies section have some fun trying to break instances. You should be able to see how the Auto Scaling Group and the EC2 screen starts bringing them up again.

High Availability is a vast area, we went mostly through scaling and some redundancy options but it might also imply Geographic replication. There is a lot of ground yet to cover so have a read through these other resources and feel free to open an issue to request additional material.