Add Amfora config

home/.config/amfora/config.toml

@@ -0,0 +1,367 @@
+# This is the default config file.
+# It also shows all the default values, if you don't create the file.
+
+# All URL values may omit the scheme and/or port, as well as the beginning double slash
+# Valid URL examples:
+# gemini://example.com
+# //example.com
+# example.com
+# example.com:123
+
+
+[a-general]
+# Press Ctrl-H to access it
+home = "gemini://gemini.circumlunar.space"
+
+# Follow up to 5 Gemini redirects without prompting.
+# A prompt is always shown after the 5th redirect and for redirects to protocols other than Gemini.
+# If set to false, a prompt will be shown before following redirects.
+auto_redirect = true
+
+# What command to run to open a HTTP(S) URL.
+# Set to "default" to try to guess the browser, or set to "off" to not open HTTP(S) URLs.
+# If a command is set, than the URL will be added (in quotes) to the end of the command.
+# A space will be prepended to the URL.
+#
+# The best to define a command is using a string array.
+# Examples:
+# http = ['firefox']
+# http = ['custom-browser', '--flag', '--option=2']
+# http = ['/path/with spaces/in it/firefox']
+#
+# Note the use of single quotes, so that backslashes will not be escaped.
+# Using just a string will also work, but it is deprecated, and will degrade if
+# you use paths with spaces.
+
+http = 'default'
+
+# Any URL that will accept a query string can be put here
+search = "gemini://tlgs.one/v/search/1"
+
+# Whether colors will be used in the terminal
+color = true
+
+# Whether ANSI color codes from the page content should be rendered
+ansi = true
+
+# Whether to replace list asterisks with unicode bullets
+bullets = true
+
+# Whether to show link after link text
+show_link = false
+
+# A number from 0 to 1, indicating what percentage of the terminal width the left margin should take up.
+left_margin = 0.15
+
+# The max number of columns to wrap a page's text to. Preformatted blocks are not wrapped.
+max_width = 100
+
+# 'downloads' is the path to a downloads folder.
+# An empty value means the code will find the default downloads folder for your system.
+# If the path does not exist it will be created.
+# Note the use of single quotes, so that backslashes will not be escaped.
+downloads = '/home/kotovalexarian/Downloads/amfora'
+
+# Max size for displayable content in bytes - after that size a download window pops up
+page_max_size = 4194304  # 4 MiB
+# Max time it takes to load a page in seconds - after that a download window pops up
+page_max_time = 10
+
+# Whether to replace tab numbers with emoji favicons, which are cached.
+emoji_favicons = false
+
+# When a scrollbar appears. "never", "auto", and "always" are the only valid values.
+# "auto" means the scrollbar only appears when the page is longer than the window.
+scrollbar = "auto"
+
+
+[auth]
+# Authentication settings
+# Note the use of single quotes for values, so that backslashes will not be escaped.
+
+[auth.certs]
+# Client certificates
+# Set domain name equal to path to client cert
+# "example.com" = 'mycert.crt'
+
+[auth.keys]
+# Client certificate keys
+# Set domain name equal to path to key for the client cert above
+# "example.com" = 'mycert.key'
+
+
+[keybindings]
+# If you have a non-US keyboard, use bind_tab1 through bind_tab0 to
+# setup the shift-number bindings: Eg, for US keyboards (the default):
+# bind_tab1 = "!"
+# bind_tab2 = "@"
+# bind_tab3 = "#"
+# bind_tab4 = "$"
+# bind_tab5 = "%"
+# bind_tab6 = "^"
+# bind_tab7 = "&"
+# bind_tab8 = "*"
+# bind_tab9 = "("
+# bind_tab0 = ")"
+
+# Whitespace is not allowed in any of the keybindings! Use 'Space' and 'Tab' to bind to those keys.
+# Multiple keys can be bound to one command, just use a TOML array.
+# To add the Alt modifier, the binding must start with Alt-, should be reasonably universal
+# Ctrl- won't work on all keys, see this for a list:
+# https://github.com/gdamore/tcell/blob/cb1e5d6fa606/key.go#L83
+
+# An example of a TOML array for multiple keys being bound to one command is the default
+# binding for reload:
+# bind_reload = ["R","Ctrl-R"]
+# One thing to note here is that "R" is capitalization sensitive, so it means shift-r.
+# "Ctrl-R" means both ctrl-r and ctrl-shift-R (this is a quirk of what ctrl-r means on
+# an ANSI terminal)
+
+# The default binding for opening the bottom bar for entering a URL or link number is:
+# bind_bottom = "space"
+# This is how to get the Spacebar as a keybinding, if you try to use " ", it won't work.
+# And, finally, an example of a simple, unmodified character is:
+# bind_edit = "e"
+# This binds the "e" key to the command to edit the current URL.
+
+# The bind_link[1-90] options are for the commands to go to the first 10 links on a page,
+# typically these are bound to the number keys:
+# bind_link1 = "1"
+# bind_link2 = "2"
+# bind_link3 = "3"
+# bind_link4 = "4"
+# bind_link5 = "5"
+# bind_link6 = "6"
+# bind_link7 = "7"
+# bind_link8 = "8"
+# bind_link9 = "9"
+# bind_link0 = "0"
+
+# All keybindings:
+#
+# bind_bottom
+# bind_edit
+# bind_home
+# bind_bookmarks
+# bind_add_bookmark
+# bind_save
+# bind_reload
+# bind_back
+# bind_forward
+# bind_pgup
+# bind_pgdn
+# bind_new_tab
+# bind_close_tab
+# bind_next_tab
+# bind_prev_tab
+# bind_quit
+# bind_help
+# bind_sub: for viewing the subscriptions page
+# bind_add_sub
+
+[url-handlers]
+# Allows setting the commands to run for various URL schemes.
+# E.g. to open FTP URLs with FileZilla set the following key:
+#   ftp = 'filezilla'
+# You can set any scheme to "off" or "" to disable handling it, or
+# just leave the key unset.
+#
+# DO NOT use this for setting the HTTP command.
+# Use the http setting in the "a-general" section above.
+#
+# NOTE: These settings are overrided by the ones in the proxies section.
+# Note the use of single quotes, so that backslashes will not be escaped.
+
+# This is a special key that defines the handler for all URL schemes for which
+# no handler is defined.
+other = 'off'
+
+
+# [[mediatype-handlers]] section
+# ---------------------------------
+#
+# Specify what applications will open certain media types.
+# By default your default application will be used to open the file when you select "Open".
+# You only need to configure this section if you want to override your default application,
+# or do special things like streaming.
+#
+# Note the use of single quotes for commands, so that backslashes will not be escaped.
+#
+#
+# To open jpeg files with the feh command:
+#
+# [[mediatype-handlers]]
+# cmd = ['feh']
+# types = ["image/jpeg"]
+#
+# Each command that you specify must come under its own [[mediatype-handlers]]. You may
+# specify as many [[mediatype-handlers]] as you want to setup multiple commands.
+#
+# If the subtype is omitted then the specified command will be used for the
+# entire type:
+#
+# [[mediatype-handlers]]
+# command = ['vlc', '--flag']
+# types = ["audio", "video"]
+#
+# A catch-all handler can by specified with "*".
+# Note that there are already catch-all handlers in place for all OSes,
+# that open the file using your default application. This is only if you
+# want to override that.
+#
+# [[mediatype-handlers]]
+# cmd = ['some-command']
+# types = [
+#         "application/pdf",
+#         "*",
+# ]
+#
+# You can also choose to stream the data instead of downloading it all before
+# opening it. This is especially useful for large video or audio files, as
+# well as radio streams, which will never complete. You can do this like so:
+#
+# [[mediatype-handlers]]
+# cmd = ['vlc', '-']
+# types = ["audio", "video"]
+# stream = true
+#
+# This uses vlc to stream all video and audio content.
+# By default stream is set to off for all handlers
+#
+#
+# If you want to always open a type in its viewer without the download or open
+# prompt appearing, you can add no_prompt = true
+#
+# [[mediatype-handlers]]
+# cmd = ['feh']
+# types = ["image"]
+# no_prompt = true
+#
+# Note: Multiple handlers cannot be defined for the same full media type, but
+# still there needs to be an order for which handlers are used. The following
+# order applies regardless of the order written in the config:
+#
+# 1. Full media type: "image/jpeg"
+# 2. Just type: "image"
+# 3. Catch-all: "*"
+
+
+[cache]
+# Options for page cache - which is only for text pages
+# Increase the cache size to speed up browsing at the expense of memory
+# Zero values mean there is no limit
+
+max_size = 0  # Size in bytes
+max_pages = 30 # The maximum number of pages the cache will store
+
+# How long a page will stay in cache, in seconds.
+timeout = 1800 # 30 mins
+
+[proxies]
+# Allows setting a Gemini proxy for different schemes.
+# The settings are similar to the url-handlers section above.
+# E.g. to open a gopher page by connecting to a Gemini proxy server:
+#   gopher = "example.com:123"
+#
+# Port 1965 is assumed if no port is specified.
+#
+# NOTE: These settings override any external handlers specified in
+# the url-handlers section.
+#
+# Note that HTTP and HTTPS are treated as separate protocols here.
+
+
+[subscriptions]
+# For tracking feeds and pages
+
+# Whether a pop-up appears when viewing a potential feed
+popup = true
+
+# How often to check for updates to subscriptions in the background, in seconds.
+# Set it to 0 to disable this feature. You can still update individual feeds
+# manually, or restart the browser.
+#
+# Note Amfora will check for updates on browser start no matter what this setting is.
+update_interval = 1800 # 30 mins
+
+# How many subscriptions can be checked at the same time when updating.
+# If you have many subscriptions you may want to increase this for faster
+# update times. Any value below 1 will be corrected to 1.
+workers = 3
+
+# The number of subscription updates displayed per page.
+entries_per_page = 20
+
+
+[theme]
+# This section is for changing the COLORS used in Amfora.
+# These colors only apply if 'color' is enabled above.
+# Colors can be set using a W3C color name, or a hex value such as "#ffffff".
+
+# Note that not all colors will work on terminals that do not have truecolor support.
+# If you want to stick to the standard 16 or 256 colors, you can get
+# a list of those here: https://jonasjacek.github.io/colors/
+# DO NOT use the names from that site, just the hex codes.
+
+# Definitions:
+#   bg = background
+#   fg = foreground
+#   dl = download
+#   btn = button
+#   hdg = heading
+#   bkmk = bookmark
+#   modal = a popup window/box in the middle of the screen
+
+# EXAMPLES:
+# hdg_1 = "green"
+# hdg_2 = "#5f0000"
+
+# Available keys to set:
+
+# bg: background for pages, tab row, app in general
+# tab_num: The number/highlight of the tabs at the top
+# tab_divider: The color of the divider character between tab numbers: |
+# bottombar_label: The color of the prompt that appears when you press space
+# bottombar_text: The color of the text you type
+# bottombar_bg
+# scrollbar: The scrollbar that appears on the right for long pages
+
+# hdg_1
+# hdg_2
+# hdg_3
+# amfora_link: A link that Amfora supports viewing. For now this is only gemini://
+# foreign_link: HTTP(S), Gopher, etc
+# link_number: The silver number that appears to the left of a link
+# regular_text: Normal gemini text, and plaintext documents
+# quote_text
+# preformatted_text
+# list_text
+
+# btn_bg: The bg color for all modal buttons
+# btn_text: The text color for all modal buttons
+
+# dl_choice_modal_bg
+# dl_choice_modal_text
+# dl_modal_bg
+# dl_modal_text
+# info_modal_bg
+# info_modal_text
+# error_modal_bg
+# error_modal_text
+# yesno_modal_bg
+# yesno_modal_text
+# tofu_modal_bg
+# tofu_modal_text
+# subscription_modal_bg
+# subscription_modal_text
+
+# input_modal_bg
+# input_modal_text
+# input_modal_field_bg: The bg of the input field, where you type the text
+# input_modal_field_text: The color of the text you type
+
+# bkmk_modal_bg
+# bkmk_modal_text
+# bkmk_modal_label
+# bkmk_modal_field_bg
+# bkmk_modal_field_text