barnacleos/build

Tool used to create the BarnacleOS images. Based on pi-gen tool used to create the official raspberrypi.org Raspbian images.

Dependencies

On Debian-based systems:

apt-get install bash quilt parted qemu-user-static debootstrap zerofree zip \
dosfstools libcap2-bin grep rsync

The file depends contains a list of tools needed. The format of this file is <tool>[:<debian-package>].

Network interfaces

Each network interface of Raspberry Pi can be used to connect to the Internet or to be the gateway for the internal Tor network. The barnaconfig utility can be used to configure the role of each network interface.

However some initial configuration may be required to use the default BarnacleOS image, such as Wi-Fi drivers installation. It can be done via SSH. Network interfaces eth0 and eth1 have default configurations to help you to connect.

eth0

eth0 is configured by default to get IPv4 address from router via DHCP without any assumptions about subnet configuration. You can just plug your Raspberry Pi to router with Ethernet cable, discover which address was given to it in router's web interface or with nmap utility and connect to it via SSH.

Let's say your router has address 192.168.0.1, subnet is 192.168.0.0/24 (netmask 255.255.255.0), your computer has address 192.168.0.2. Do the following:

$ sudo apt-get install nmap
$ nmap -sn 192.168.0.0/24
Starting Nmap 6.47 ( http://nmap.org ) at 2017-07-09 15:39 UTC
Nmap scan report for 192.168.0.1
Host is up (0.0039s latency).
Nmap scan report for 192.168.0.2
Host is up (0.00078s latency).
Nmap scan report for 192.168.0.3
Host is up (0.00104s latence).
Nmap done: 256 IP addresses (3 hosts up) scanned in 7.97 seconds

So your Raspbbery Pi has address 192.168.0.3. Connect to it via SSH:

$ ssh user@192.168.0.3

eth1

eth1 is configured by default to be the gateway and the DHCP server for the IPv4 subnet 192.168.82.0/24 (netmask 255.255.255.0) with static address 192.168.82.1 (see also). If your Raspberry Pi has two Ethernet ports, you can just plug your computer to it, run DHCP client on the corresponding network interface and connect to it via SSH.

Let's say your computer has network interface eth42 which is plugged to Raspberry Pi. Do the following to connect to Raspberry Pi via SSH:

$ printf "allow-hotplug eth42\niface eth42 inet dhcp\n" | sudo tee /etc/network/interfaces.d/eth42
$ sudo ifup eth42
$ ssh user@192.168.82.1

Network configuration

• Hostname: barnacleos
• FQDN: barnacleos.local
• Subnet: 192.168.82.0/24 (netmask 255.255.255.0)
• Gateway: 192.168.82.1
• Broadcast: 192.168.82.255
• IP range: 192.168.82.2 to 192.168.82.254

System configuration

• Root login via SSH is disabled

• Root password is disabled

• User user has access via SSH with password password

• SSH host keys are generated at first startup, so fingerprint is different for each installation of the same image

• User has passwordless sudo