compton is a compositor based on Dana Jansens' version of xcompmgr (which itself was written by Keith Packard). It includes some improvements over the original xcompmgr, like window frame opacity and inactive window transparency.
Enabled client-side shadows on windows. Note desktop windows (windows with '_NET_WM_WINDOW_TYPE_DESKTOP') never get shadow, unless explicitly requested using the wintypes option.
Set the log level. Possible values are "TRACE", "DEBUG", "INFO", "WARN", "ERROR", in increasing level of importance. Case doesn't matter. If using the "TRACE" log level, it's better to log into a file using *--log-file*, since it can generate a huge stream of logs.
Set the log file. If *--log-file* is never specified, logs will be written to stderr. Otherwise, logs will to written to the given file, though some of the early logs might still be written to the stderr. When setting this option from the config file, it is recommended to use an absolute path.
Use the new, reimplemented version of the backends. The new backends are HIGHLY UNSTABLE at this point, you have been warned. This option is not available in the config file.
Look for configuration file at the path. See *CONFIGURATION FILES* section below for where compton looks for a configuration file by default. Use `/dev/null` to avoid loading configuration file.
Do not paint shadows on shaped windows. Note shaped windows here means windows setting its shape through X Shape extension. Those using ARGB background is beyond our control. Deprecated, use `--shadow-exclude 'bounding_shaped'` or `--shadow-exclude 'bounding_shaped && !rounded_corners'` instead.
Limit compton to repaint at most once every 1 / 'refresh_rate' second to boost performance. This should not be used with *--vsync* drm/opengl/opengl-oml as they essentially does *--sw-opti*'s job already, unless you wish to specify a lower refresh rate than the actual value.
Use EWMH '_NET_ACTIVE_WINDOW' to determine currently focused window, rather than listening to 'FocusIn'/'FocusOut' event. Might have more accuracy, provided that the WM supports it.
*--respect-prop-shadow*::
Respect '_COMPTON_SHADOW'. This a prototype-level feature, which you must not rely on.
Unredirect all windows if a full-screen opaque window is detected, to maximize performance for full-screen windows. Known to cause flickering when redirecting/unredirecting windows. *--paint-on-overlay* may make the flickering less obvious.
Use fixed inactive dim value, instead of adjusting according to window opacity.
*--detect-transient*::
Use 'WM_TRANSIENT_FOR' to group windows, and consider windows in the same group focused at the same time.
*--detect-client-leader*::
Use 'WM_CLIENT_LEADER' to group windows, and consider windows in the same group focused at the same time. 'WM_TRANSIENT_FOR' has higher priority if *--detect-transient* is enabled, too.
Blur background of semi-transparent / ARGB windows. Bad in performance, with driver-dependent behavior. The name of the switch may change without prior notifications.
*--blur-background-frame*::
Blur background of windows when the window frame is not opaque. Implies *--blur-background*. Bad in performance, with driver-dependent behavior. The name may change.
*--blur-background-fixed*::
Use fixed blur strength rather than adjusting according to window opacity.
In other words, the matrix is formatted as a list of comma separated numbers. The first two numbers must be integers, which specify the width and height of the matrix. They must be odd numbers. Then, the following 'width * height - 1' numbers specifies the numbers in the matrix, row by row, excluding the center element.
The element in the center will either be 1.0 or varying based on opacity, depending on whether you have `--blur-background-fixed`. Yet the automatic adjustment of blur factor may not work well with a custom blur kernel.
May also be one of the predefined kernels: `3x3box` (default), `5x5box`, `7x7box`, `3x3gaussian`, `5x5gaussian`, `7x7gaussian`, `9x9gaussian`, `11x11gaussian`. All Gaussian kernels are generated with sigma = 0.84089642 . You may use the accompanied `compton-convgen.py` to generate blur kernels.
Resize damaged region by a specific number of pixels. A positive value enlarges it while a negative one shrinks it. If the value is positive, those additional pixels will not be actually painted to screen, only used in blur calculation, and such. (Due to technical limitations, with *--use-damage*, those pixels will still be incorrectly painted to screen.) Primarily used to fix the line corruption issues of blur, in which case you should use the blur radius value here (e.g. with a 3x3 kernel, you should use *--resize-damage* 1, with a 5x5 one you use *--resize-damage* 2, and so on). May or may not work with `--glx-no-stencil`. Shrinking doesn't function correctly.
Specify a list of opacity rules, in the format `PERCENT:PATTERN`, like `50:name *= "Firefox"`. compton-trans is recommended over this. Note we don't make any guarantee about possible conflicts with other programs that set '_NET_WM_WINDOW_OPACITY' on frame or client windows.
Specify a X geometry that describes the region in which shadow should not be painted in, such as a dock window region. Use `--shadow-exclude-reg x10+0-0`, for example, if the 10 pixels on the bottom of the screen should not have shadows painted on.
Specify the backend to use: `xrender`, `glx`, or `xr_glx_hybrid`. `xrender` is the default one.
+
--
* `xrender` backend performs all rendering operations with X Render extension. It is what `xcompmgr` uses, and is generally a safe fallback when you encounter rendering artifacts or instability.
* `glx` (OpenGL) backend performs all rendering operations with OpenGL. It is more friendly to some VSync methods, and has significantly superior performance on color inversion (`--invert-color-include`) or blur (`--blur-background`). It requires proper OpenGL 2.0 support from your driver and hardware. You may wish to look at the GLX performance optimization options below. `--xrender-sync-fence` might be needed on some systems to avoid delay in changes of screen contents.
* `xr_glx_hybrid` backend renders the updated screen contents with X Render and presents it on the screen with GLX. It attempts to address the rendering issues some users encountered with GLX backend and enables the better VSync of GLX backends. `--vsync-use-glfinish` might fix some rendering issues with this backend.
GLX backend: Avoid using stencil buffer, useful if you don't have a stencil buffer. Might cause incorrect opacity when rendering transparent content (but never practically happened) and may not work with *--blur-background*. My tests show a 15% performance boost. Recommended.
GLX backend: Avoid rebinding pixmap on window damage. Probably could improve performance on rapid window content changes, but is known to break things on some drivers (LLVMpipe, xf86-video-intel, etc.). Recommended if it works.
Use X Sync fence to sync clients' draw calls, to make sure all draw calls are finished before compton starts drawing. Needed on nvidia-drivers with GLX backend for some users.
GLX backend: Use specified GLSL fragment shader for rendering window contents. See `compton-default-fshader-win.glsl` and `compton-fake-transparency-fshader-win.glsl` in the source tree for examples.
*--force-win-blend*::
Force all windows to be painted with blending. Useful if you have a *--glx-fshader-win* that could turn opaque pixels transparent.
'TARGET' is either a predefined target name, or the name of a window property to match. Supported predefined targets are `id`, `x`, `y`, `x2` (x + widthb), `y2`, `width`, `height`, `widthb` (width + 2 * `border_width`), `heightb`, `override_redirect`, `argb` (whether the window has an ARGB visual), `focused`, `wmwin` (whether the window looks like a WM window, i.e. has no child window with `WM_STATE` and is not override-redirected), `bounding_shaped`, `rounded_corners` (requires *--detect-rounded-corners*), `client` (ID of client window), `window_type` (window type in string), `leader` (ID of window leader), `name`, `class_g` (= `WM_CLASS[1]`), `class_i` (= `WM_CLASS[0]`), and `role`.
'CLIENT/FRAME' is a single `@` if the window attribute should be be looked up on client window, nothing if on frame window;
'INDEX' (optional) is the index number of the property to look up. For example, `[2]` means look at the third value in the property. Do not specify it for predefined targets.
'FORMAT' (optional) specifies the format of the property, 8, 16, or 32. On absence we use format X reports. Do not specify it for predefined or string targets.
'TYPE' is a single character representing the type of the property to match for: `c` for 'CARDINAL', `a` for 'ATOM', `w` for 'WINDOW', `d` for 'DRAWABLE', `s` for 'STRING' (and any other string types, such as 'UTF8_STRING'). Do not specify it for predefined targets.
'OP QUALIFIER' (optional), applicable only for equals operator, could be `?` (ignore-case).
'MATCH TYPE' (optional), applicable only for equals operator, could be nothing (exact match), `*` (match anywhere), `^` (match from start), `%` (wildcard), or `~` (PCRE regular expression).
'OPERATOR' is one of `=` (equals), `<`, `>`, `<=`, `=>`, or nothing (exists). Exists operator checks whether a property exists on a window (but for predefined targets, exists means != 0 then).
'PATTERN' is either an integer or a string enclosed by single or double quotes. Python-3-style escape sequences and raw string are supported in the string format.
Supported logical operators are `&&` (and) and `||` (or). `&&` has higher precedence than `||`, left-to-right associativity. Use parentheses to change precedence.
Examples:
# If the window is focused
focused
focused = 1
# If the window is not override-redirected
!override_redirect
override_redirect = false
override_redirect != true
override_redirect != 1
# If the window is a menu
window_type *= "menu"
_NET_WM_WINDOW_TYPE@:a *= "MENU"
# If the window name contains "Firefox", ignore case
name *?= "Firefox"
_NET_WM_NAME@:s *?= "Firefox"
# If the window name ends with "Firefox"
name %= "*Firefox"
name ~= "Firefox$"
# If the window has a property _COMPTON_SHADOW with value 0, type CARDINAL,
# format 32, value 0, on its frame window
_COMPTON_SHADOW:32c = 0
# If the third value of _NET_FRAME_EXTENTS is less than 20, or there's no
'TYPE' is one of "e" (exact match), "a" (match anywhere), "s" (match from start), "w" (wildcard), and "p" (PCRE regular expressions, if compiled with the support).
'FLAGS' could be a series of flags. Currently the only defined flag is "i" (ignore case).
compton could read from a configuration file if libconfig support is compiled in. If *--config* is not used, compton will seek for a configuration file in `$XDG_CONFIG_HOME/compton.conf` (`~/.config/compton.conf`, usually), then `~/.compton.conf`, then `compton.conf` under `$XDG_CONFIG_DIRS` (often `/etc/xdg/compton.conf`).
compton uses general libconfig configuration file format. A sample configuration file is available as `compton.sample.conf` in the source tree. Most of commandline switches can be used as options in configuration file as well. For example, *--vsync* option documented above can be set in the configuration file using `vsync = `. Command line options will always overwrite the settings in the configuration file.
Window-type-specific settings are exposed only in configuration file and has the following format:
'WINDOW_TYPE' is one of the 15 window types defined in EWMH standard: "unknown", "desktop", "dock", "toolbar", "menu", "utility", "splash", "dialog", "normal", "dropdown_menu", "popup_menu", "tooltip", "notify", "combo", and "dnd".
Following per window-type options are available: ::
fade, shadow:::
Controls window-type-specific shadow and fade settings.
opacity:::
Controls default opacity of the window type.
focus:::
Controls whether the window of this type is to be always considered focused. (By default, all window types except "normal" and "dialog" has this on.)
full-shadow:::
Controls whether shadow is drawn under the parts of the window that you normally won't be able to see. Useful when the window has parts of it transparent, and you want shadows in those areas.
Controls whether this type of windows should cause screen to become redirected again after been unredirected. If you have *--unredir-if-possible* set, and doesn't want certain window to cause unnecessary screen redirection, you can set this to `true`.
An integer. The size of the blur kernel, required by 'gaussian' and 'box' blur methods. For the 'kernel' method, the size is included in the kernel. Corresponds to the `--blur-size` command line option.
*deviation*:::
A floating point number. The standard deviation for the 'gaussian' blur method. Corresponds to the `--blur-deviation` command line option.
*kernel*:::
A string. The kernel to use for the 'kernel' blur method, specified in the same format as the `--blur-kerns` option. Corresponds to the `--blur-kerns` command line option.
It's possible to control compton via D-Bus messages, by running compton with *--dbus* and send messages to `com.github.chjj.compton.<DISPLAY>`. `<DISPLAY>` is the display used by compton, with all non-alphanumeric characters transformed to underscores. For `DISPLAY=:0.0` you should use `com.github.chjj.compton._0_0`, for example.
The D-Bus methods and signals are not yet stable, thus undocumented right now.
* Run compton with client-side shadow and fading, disable shadow on dock windows and drag-and-drop windows:
+
------------
$ compton -cCGf
------------
* Same thing as above, plus making inactive windows 80% transparent, making frame 80% transparent, don't fade on window open/close, enable software optimization, and fork to background:
