moby--moby/docs/sources/project/test-and-docs.md

page_title: Run tests and test documentation page_description: Describes Docker's testing infrastructure page_keywords: make test, make docs, Go tests, gofmt, contributing, running tests

Run tests and test documentation

Contributing includes testing your changes. If you change the Docker code, you may need to add a new test or modify an existing one. Your contribution could even be adding tests to Docker. For this reason, you need to know a little about Docker's test infrastructure.

Many contributors contribute documentation only. Or, a contributor makes a code contribution that changes how Docker behaves and that change needs documentation. For these reasons, you also need to know how to build, view, and test the Docker documentation.

In this section, you run tests in the dry-run-test branch of your Docker fork. If you have followed along in this guide, you already have this branch. If you don't have this branch, you can create it or simply use another of your branches.

Understand testing at Docker

Docker tests use the Go language's test framework. In this framework, files whose names end in _test.go contain test code; you'll find test files like this throughout the Docker repo. Use these files for inspiration when writing your own tests. For information on Go's test framework, see Go's testing package documentation and the go test help.

You are responsible for unit testing your contribution when you add new or change existing Docker code. A unit test is a piece of code that invokes a single, small piece of code ( unit of work ) to verify the unit works as expected.

Depending on your contribution, you may need to add integration tests. These are tests that combine two or more work units into one component. These work units each have unit tests and then, together, integration tests that test the interface between the components. The integration and integration-cli directories in the Docker repository contain integration test code.

Testing is its own speciality. If you aren't familiar with testing techniques, there is a lot of information available to you on the Web. For now, you should understand that, the Docker maintainers may ask you to write a new test or change an existing one.

Run tests on your local host

Before submitting any code change, you should run the entire Docker test suite. The Makefile contains a target for the entire test suite. The target's name is simply test. The make file contains several targets for testing:

Target	What this target does
test	Run all the tests.
test-unit	Run just the unit tests.
test-integration	Run just integration tests.
test-integration-cli	Run the test for the integration command line interface.
test-docker-py	Run the tests for Docker API client.
docs-test	Runs the documentation test build.

Run the entire test suite on your current repository:

1. Open a terminal on your local host.

2. Change to the root your Docker repository.

    $ cd docker-fork
   

3. Make sure you are in your development branch.

    $ git checkout dry-run-test
   

4. Run the make test command.

    $ make test
   

   This command does several things, it creates a container temporarily for testing. Inside that container, the make:

   • creates a new binary
   • cross-compiles all the binaries for the various operating systems
   • runs the all the tests in the system

   It can take several minutes to run all the tests. When they complete successfully, you see the output concludes with something like this:

    [PASSED]: top - sleep process should be listed in privileged mode
    [PASSED]: version - verify that it works and that the output is properly formatted
    PASS
    coverage: 70.8% of statements
    ---> Making bundle: test-docker-py (in bundles/1.5.0-dev/test-docker-py)
    +++ exec docker --daemon --debug --host unix:///go/src/github.com/docker/docker/bundles/1.5.0-dev/test-docker-py/docker.sock --storage-driver vfs --exec-driver native --pidfile /go/src/github.com/docker/docker/bundles/1.5.0-dev/test-docker-py/docker.pid
    .................................................................
    ----------------------------------------------------------------------
    Ran 65 tests in 89.266s
   

Run test targets inside the development container

If you are working inside a Docker development container, you use the hack/make.sh script to run tests. The hack/make.sh script doesn't have a single target that runs all the tests. Instead, you provide a single commmand line with multiple targets that does the same thing.

Try this now.

1. Open a terminal and change to the docker-fork root.

2. Start a Docker development image.

   If you are following along with this guide, you should have a dry-run-test image.

    $ docker run --privileged --rm -ti -v `pwd`:/go/src/github.com/docker/docker dry-run-test /bin/bash
   

3. Run the tests using the hack/make.sh script.

    root@5f8630b873fe:/go/src/github.com/docker/docker# hack/make.sh dynbinary binary cross test-unit test-integration test-integration-cli test-docker-py
   

   The tests run just as they did within your local host.

Of course, you can also run a subset of these targets too. For example, to run just the unit tests:

root@5f8630b873fe:/go/src/github.com/docker/docker# hack/make.sh dynbinary binary cross test-unit

Most test targets require that you build these precursor targets first: dynbinary binary cross

Running individual or multiple named tests

You can use the TESTFLAGS environment variable to run a single test. The flag's value is passed as arguments to the go test command. For example, from your local host you can run the TestBuild test with this command:

$ TESTFLAGS='-test.run ^TestBuild$' make test

To run the same test inside your Docker development container, you do this:

root@5f8630b873fe:/go/src/github.com/docker/docker# TESTFLAGS='-run ^TestBuild$' hack/make.sh

If test under Boot2Docker fail do to space errors

Running the tests requires about 2GB of memory. If you are running your container on bare metal, that is you are not running with Boot2Docker, your Docker development container is able to take the memory it requires directly from your local host.

If you are running Docker using Boot2Docker, the VM uses 2048MB by default. This means you can exceed the memory of your VM running tests in a Boot2Docker environment. When the test suite runs out of memory, it returns errors similar to the following:

server.go:1302 Error: Insertion failed because database is full: database or
disk is full

utils_test.go:179: Error copy: exit status 1 (cp: writing
'/tmp/docker-testd5c9-[...]': No space left on device

To increase the memory on your VM, you need to reinitialize the Boot2Docker VM with new memory settings.

1. Stop all running containers.

2. View the current memory setting.

    $ boot2docker info
    {
        "Name": "boot2docker-vm",
        "UUID": "491736fd-4075-4be7-a6f5-1d4cdcf2cc74",
        "Iso": "/Users/mary/.boot2docker/boot2docker.iso",
        "State": "running",
        "CPUs": 8,
        "Memory": 2048,
        "VRAM": 8,
        "CfgFile": "/Users/mary/VirtualBox VMs/boot2docker-vm/boot2docker-vm.vbox",
        "BaseFolder": "/Users/mary/VirtualBox VMs/boot2docker-vm",
        "OSType": "",
        "Flag": 0,
        "BootOrder": null,
        "DockerPort": 0,
        "SSHPort": 2022,
        "SerialFile": "/Users/mary/.boot2docker/boot2docker-vm.sock"
    }
   

3. Delete your existing boot2docker profile.

    $ boot2docker delete
   

4. Reinitialize boot2docker and specify a higher memory.

    $ boot2docker init -m 5555
   

5. Verify the memory was reset.

    $ boot2docker info
   

6. Restart your container and try your test again.

Build and test the documentation

The Docker documentation source files are under docs/sources. The content is written using extended Markdown. We use the static generator MkDocs to build Docker's documentation. Of course, you don't need to install this generator to build the documentation, it is included with container.

You should always check your documentation for grammar and spelling. The best way to do this is with an online grammar checker.

When you change a documentation source file, you should test your change locally to make sure your content is there and any links work correctly. You can build the documentation from the local host. The build starts a container and loads the documentation into a server. As long as this container runs, you can browse the docs.

1. In a terminal, change to the root of your docker-fork repository.

    $ cd ~/repos/dry-run-test
   

2. Make sure you are in your feature branch.

    $ git status
    On branch dry-run-test
    Your branch is up-to-date with 'origin/dry-run-test'.
    nothing to commit, working directory clean
   

3. Build the documentation.

    $ make docs
   

   When the build completes, you'll see a final output message similar to the following:

    Successfully built ee7fe7553123
    docker run --rm -it  -e AWS_S3_BUCKET -e NOCACHE -p 8000:8000 "docker-docs:dry-run-test" mkdocs serve
    Running at: http://0.0.0.0:8000/
    Live reload enabled.
    Hold ctrl+c to quit.
   

4. Enter the URL in your browser.

   If you are running Boot2Docker, replace the default localhost address (0.0.0.0) with your DOCKERHOST value. You can get this value at any time by entering boot2docker ip at the command line.

5. Once in the documentation, look for the red notice to verify you are seeing the correct build.

   

6. Navigate to your new or changed document.

7. Review both the content and the links.

8. Return to your terminal and exit out of the running documentation container.

Where to go next

Congratulations, you have successfully completed the basics you need to understand the Docker test framework. In the next steps, you use what you have learned so far to contribute to Docker by working on an issue.