moby--moby/docs/installation/centos.md

CentOS

Docker is supported on the following versions of CentOS:

• CentOS 7.X
• CentOS 6.5 or higher

Installation on other binary compatible EL6/EL7 distributions such as Scientific Linux might succeed, but Docker does not test or support Docker on these distributions.

This page instructs you to install using Docker-managed release packages and installation mechanisms. Using these packages ensures you get the latest release of Docker. If you wish to install using CentOS-managed packages, consult your CentOS documentation.

Prerequisites

Docker requires a 64-bit installation regardless of your CentOS version. Also, your kernel must be 3.10 at minimum. CentOS 7 runs the 3.10 kernel, 6.5 does not. We make an exception for CentOS 6.5. To run Docker on CentOS-6.5 or later, you need kernel 2.6.32-431 or higher.

To check your current kernel version, open a terminal and use uname -r to display your kernel version:

$ uname -r 
2.6.32-431.el6.x86_64

Finally, is it recommended that you fully update your system. Please keep in mind that CentOS 6 should be fully patched to fix any potential kernel bugs. Any reported kernel bugs may have already been fixed on the latest kernel packages

Install

You use the same installation procedure for all versions of CentOS, only the package you install differs. There are two packages to choose from:

Version	Package name
6.5 and higher	https://get.docker.com/rpm/1.7.0/centos-6/RPMS/x86_64/docker-engine-1.7.0-1.el6.x86_64.rpm https://get.docker.com/rpm/1.7.0/centos-6/SRPMS/docker-engine-1.7.0-1.el6.src.rpm
7.X	https://get.docker.com/rpm/1.7.0/centos-7/RPMS/x86_64/docker-engine-1.7.0-1.el7.centos.x86_64.rpm https://get.docker.com/rpm/1.7.0/centos-7/SRPMS/docker-engine-1.7.0-1.el7.centos.src.rpm

This procedure depicts an installation on version 6.5. If you are installing on 7.X, substitute that package for your installation.

1. Log into your machine as a user with sudo or root privileges.

2. Make sure your existing packages are up-to-date.

    $ sudo yum update
   

3. Download the Docker RPM to the current directory.

    $ curl -O -sSL https://get.docker.com/rpm/1.7.0/centos-6/RPMS/x86_64/docker-engine-1.7.0-1.el6.x86_64.rpm
   

4. Use yum to install the package.

    $ sudo yum localinstall --nogpgcheck docker-engine-1.7.0-1.el6.x86_64.rpm
   

5. Start the Docker daemon.

    $ sudo service docker start
   

6. Verify docker is installed correctly by running a test image in a container.

    $ sudo docker run hello-world
    Unable to find image 'hello-world:latest' locally
    latest: Pulling from hello-world
    a8219747be10: Pull complete 
    91c95931e552: Already exists 
    hello-world:latest: The image you are pulling has been verified. Important: image verification is a tech preview feature and should not be relied on to provide security.
    Digest: sha256:aa03e5d0d5553b4c3473e89c8619cf79df368babd1.7.0cf5daeb82aab55838d
    Status: Downloaded newer image for hello-world:latest
    Hello from Docker.
    This message shows that your installation appears to be working correctly.
   
    To generate this message, Docker took the following steps:
     1. The Docker client contacted the Docker daemon.
     2. The Docker daemon pulled the "hello-world" image from the Docker Hub.
    		(Assuming it was not already locally available.)
     3. The Docker daemon created a new container from that image which runs the
    		executable that produces the output you are currently reading.
     4. The Docker daemon streamed that output to the Docker client, which sent it
    		to your terminal.
   
    To try something more ambitious, you can run an Ubuntu container with:
     $ docker run -it ubuntu bash
   
    For more examples and ideas, visit:
     http://docs.docker.com/userguide/
   

Create a docker group

The docker daemon binds to a Unix socket instead of a TCP port. By default that Unix socket is owned by the user root and other users can access it with sudo. For this reason, docker daemon always runs as the root user.

To avoid having to use sudo when you use the docker command, create a Unix group called docker and add users to it. When the docker daemon starts, it makes the ownership of the Unix socket read/writable by the docker group.

Warning

: The docker group is equivalent to the root user; For details on how this impacts security in your system, see Docker Daemon Attack Surface for details.

To create the docker group and add your user:

1. Log into Centos as a user with sudo privileges.

2. Create the docker group and add your user.

   sudo usermod -aG docker your_username

3. Log out and log back in.

   This ensures your user is running with the correct permissions.

4. Verify your work by running docker without sudo.

    $ docker run hello-world
   

Start the docker daemon at boot

To ensure Docker starts when you boot your system, do the following:

  $ sudo chkconfig docker on

If you need to add an HTTP Proxy, set a different directory or partition for the Docker runtime files, or make other customizations, read our Systemd article to learn how to customize your Systemd Docker daemon options.

Uninstall

You can uninstall the Docker software with yum.

1. List the package you have installed.

    $ yum list installed | grep docker
    yum list installed | grep docker
    docker-engine.x86_64                1.7.0-1.el6
    																																						 @/docker-engine-1.7.0-1.el6.x86_64.rpm
   

2. Remove the package.

    $ sudo yum -y remove docker-engine.x86_64 
   

   This command does not remove images, containers, volumes, or user-created configuration files on your host.

3. To delete all images, containers, and volumes, run the following command:

    $ rm -rf /var/lib/docker
   

4. Locate and delete any user-created configuration files.