mirror of https://github.com/moby/moby.git synced 2022-11-09 12:21:53 -05:00

Sebastiaan van Stijn c3dff2359d

fix confusing description of stdout/stdin pipe

Signed-off-by: Sebastiaan van Stijn <github@gone.nl>

2017-05-08 15:33:14 +02:00

74 KiB

Raw Blame History

title	description	keywords
Docker run reference	Configure containers at runtime	docker, run, configure, runtime

Docker run reference

Docker runs processes in isolated containers. A container is a process which runs on a host. The host may be local or remote. When an operator executes docker run, the container process that runs is isolated in that it has its own file system, its own networking, and its own isolated process tree separate from the host.

This page details how to use the docker run command to define the container's resources at runtime.

General form

The basic docker run command takes this form:

$ docker run [OPTIONS] IMAGE[:TAG|@DIGEST] [COMMAND] [ARG...]

The docker run command must specify an IMAGE to derive the container from. An image developer can define image defaults related to:

detached or foreground running
container identification
network settings
runtime constraints on CPU and memory

With the docker run [OPTIONS] an operator can add to or override the image defaults set by a developer. And, additionally, operators can override nearly all the defaults set by the Docker runtime itself. The operator's ability to override image and Docker runtime defaults is why run has more options than any other docker command.

To learn how to interpret the types of [OPTIONS], see Option types.

Note

: Depending on your Docker system configuration, you may be required to preface the docker run command with sudo. To avoid having to use sudo with the docker command, your system administrator can create a Unix group called docker and add users to it. For more information about this configuration, refer to the Docker installation documentation for your operating system.

Operator exclusive options

Only the operator (the person executing docker run) can set the following options.

Detached vs foreground
- Detached (-d)
- Foreground
Container identification
- Name (--name)
- PID equivalent
IPC settings (--ipc)
Network settings
Restart policies (--restart)
Clean up (--rm)
Runtime constraints on resources
Runtime privilege and Linux capabilities

Detached vs foreground

When starting a Docker container, you must first decide if you want to run the container in the background in a "detached" mode or in the default foreground mode:

-d=false: Detached mode: Run container in the background, print new container id

Detached (-d)

To start a container in detached mode, you use -d=true or just -d option. By design, containers started in detached mode exit when the root process used to run the container exits. A container in detached mode cannot be automatically removed when it stops, this means you cannot use the --rm option with -d option.

Do not pass a service x start command to a detached container. For example, this command attempts to start the nginx service.

$ docker run -d -p 80:80 my_image service nginx start

This succeeds in starting the nginx service inside the container. However, it fails the detached container paradigm in that, the root process (service nginx start) returns and the detached container stops as designed. As a result, the nginx service is started but could not be used. Instead, to start a process such as the nginx web server do the following:

$ docker run -d -p 80:80 my_image nginx -g 'daemon off;'

To do input/output with a detached container use network connections or shared volumes. These are required because the container is no longer listening to the command line where docker run was run.

To reattach to a detached container, use docker attach command.

Foreground

In foreground mode (the default when -d is not specified), docker run can start the process in the container and attach the console to the process's standard input, output, and standard error. It can even pretend to be a TTY (this is what most command line executables expect) and pass along signals. All of that is configurable:

-a=[]           : Attach to `STDIN`, `STDOUT` and/or `STDERR`
-t              : Allocate a pseudo-tty
--sig-proxy=true: Proxy all received signals to the process (non-TTY mode only)
-i              : Keep STDIN open even if not attached

If you do not specify -a then Docker will attach to both stdout and stderr . You can specify to which of the three standard streams (STDIN, STDOUT, STDERR) you'd like to connect instead, as in:

$ docker run -a stdin -a stdout -i -t ubuntu /bin/bash

For interactive processes (like a shell), you must use -i -t together in order to allocate a tty for the container process. -i -t is often written -it as you'll see in later examples. Specifying -t is forbidden when the client is receiving its standard input from a pipe, as in:

$ echo test | docker run -i busybox cat

Note

: A process running as PID 1 inside a container is treated specially by Linux: it ignores any signal with the default action. So, the process will not terminate on SIGINT or SIGTERM unless it is coded to do so.

Container identification

Name (--name)

The operator can identify a container in three ways:

Identifier type	Example value
UUID long identifier	"f78375b1c487e03c9438c729345e54db9d20cfa2ac1fc3494b6eb60872e74778"
UUID short identifier	"f78375b1c487"
Name	"evil_ptolemy"

The UUID identifiers come from the Docker daemon. If you do not assign a container name with the --name option, then the daemon generates a random string name for you. Defining a name can be a handy way to add meaning to a container. If you specify a name, you can use it when referencing the container within a Docker network. This works for both background and foreground Docker containers.

Note

: Containers on the default bridge network must be linked to communicate by name.

PID equivalent

Finally, to help with automation, you can have Docker write the container ID out to a file of your choosing. This is similar to how some programs might write out their process ID to a file (you've seen them as PID files):

--cidfile="": Write the container ID to the file

Image[:tag]

While not strictly a means of identifying a container, you can specify a version of an image you'd like to run the container with by adding image[:tag] to the command. For example, docker run ubuntu:14.04.

Image[@digest]

Images using the v2 or later image format have a content-addressable identifier called a digest. As long as the input used to generate the image is unchanged, the digest value is predictable and referenceable.

The following example runs a container from the alpine image with the sha256:9cacb71397b640eca97488cf08582ae4e4068513101088e9f96c9814bfda95e0 digest:

$ docker run alpine@sha256:9cacb71397b640eca97488cf08582ae4e4068513101088e9f96c9814bfda95e0 date

PID settings (--pid)

--pid=""  : Set the PID (Process) Namespace mode for the container,
             'container:<name|id>': joins another container's PID namespace
             'host': use the host's PID namespace inside the container

By default, all containers have the PID namespace enabled.

PID namespace provides separation of processes. The PID Namespace removes the view of the system processes, and allows process ids to be reused including pid 1.

In certain cases you want your container to share the host's process namespace, basically allowing processes within the container to see all of the processes on the system. For example, you could build a container with debugging tools like strace or gdb, but want to use these tools when debugging processes within the container.

Example: run htop inside a container

Create this Dockerfile:

FROM alpine:latest
RUN apk add --update htop && rm -rf /var/cache/apk/*
CMD ["htop"]

Build the Dockerfile and tag the image as myhtop:

$ docker build -t myhtop .

Use the following command to run htop inside a container:

$ docker run -it --rm --pid=host myhtop

Joining another container's pid namespace can be used for debugging that container.

Example

Start a container running a redis server:

$ docker run --name my-redis -d redis

Debug the redis container by running another container that has strace in it:

$ docker run -it --pid=container:my-redis my_strace_docker_image bash
$ strace -p 1

UTS settings (--uts)

--uts=""  : Set the UTS namespace mode for the container,
       'host': use the host's UTS namespace inside the container

The UTS namespace is for setting the hostname and the domain that is visible to running processes in that namespace. By default, all containers, including those with --network=host, have their own UTS namespace. The host setting will result in the container using the same UTS namespace as the host. Note that --hostname is invalid in host UTS mode.

You may wish to share the UTS namespace with the host if you would like the hostname of the container to change as the hostname of the host changes. A more advanced use case would be changing the host's hostname from a container.

IPC settings (--ipc)

--ipc=""  : Set the IPC mode for the container,
             'container:<name|id>': reuses another container's IPC namespace
             'host': use the host's IPC namespace inside the container

By default, all containers have the IPC namespace enabled.

IPC (POSIX/SysV IPC) namespace provides separation of named shared memory segments, semaphores and message queues.

Shared memory segments are used to accelerate inter-process communication at memory speed, rather than through pipes or through the network stack. Shared memory is commonly used by databases and custom-built (typically C/OpenMPI, C++/using boost libraries) high performance applications for scientific computing and financial services industries. If these types of applications are broken into multiple containers, you might need to share the IPC mechanisms of the containers.

Network settings

--dns=[]           : Set custom dns servers for the container
--network="bridge" : Connect a container to a network
                      'bridge': create a network stack on the default Docker bridge
                      'none': no networking
                      'container:<name|id>': reuse another container's network stack
                      'host': use the Docker host network stack
                      '<network-name>|<network-id>': connect to a user-defined network
--network-alias=[] : Add network-scoped alias for the container
--add-host=""      : Add a line to /etc/hosts (host:IP)
--mac-address=""   : Sets the container's Ethernet device's MAC address
--ip=""            : Sets the container's Ethernet device's IPv4 address
--ip6=""           : Sets the container's Ethernet device's IPv6 address
--link-local-ip=[] : Sets one or more container's Ethernet device's link local IPv4/IPv6 addresses

By default, all containers have networking enabled and they can make any outgoing connections. The operator can completely disable networking with docker run --network none which disables all incoming and outgoing networking. In cases like this, you would perform I/O through files or STDIN and STDOUT only.

Publishing ports and linking to other containers only works with the default (bridge). The linking feature is a legacy feature. You should always prefer using Docker network drivers over linking.

Your container will use the same DNS servers as the host by default, but you can override this with --dns.

By default, the MAC address is generated using the IP address allocated to the container. You can set the container's MAC address explicitly by providing a MAC address via the --mac-address parameter (format:12:34:56:78:9a:bc).Be aware that Docker does not check if manually specified MAC addresses are unique.

Supported networks :

Network	Description
none	No networking in the container.
bridge (default)	Connect the container to the bridge via veth interfaces.
host	Use the host's network stack inside the container.
container:<name\|id>	Use the network stack of another container, specified via its name or id.
NETWORK	Connects the container to a user created network (using `docker network create` command)

Network: none

With the network is none a container will not have access to any external routes. The container will still have a loopback interface enabled in the container but it does not have any routes to external traffic.

Network: bridge

With the network set to bridge a container will use docker's default networking setup. A bridge is setup on the host, commonly named docker0, and a pair of veth interfaces will be created for the container. One side of the veth pair will remain on the host attached to the bridge while the other side of the pair will be placed inside the container's namespaces in addition to the loopback interface. An IP address will be allocated for containers on the bridge's network and traffic will be routed though this bridge to the container.

Containers can communicate via their IP addresses by default. To communicate by name, they must be linked.

Network: host

With the network set to host a container will share the host's network stack and all interfaces from the host will be available to the container. The container's hostname will match the hostname on the host system. Note that --mac-address is invalid in host netmode. Even in host network mode a container has its own UTS namespace by default. As such --hostname is allowed in host network mode and will only change the hostname inside the container. Similar to --hostname, the --add-host, --dns, --dns-search, and --dns-option options can be used in host network mode. These options update /etc/hosts or /etc/resolv.conf inside the container. No change are made to /etc/hosts and /etc/resolv.conf on the host.

Compared to the default bridge mode, the host mode gives significantly better networking performance since it uses the host's native networking stack whereas the bridge has to go through one level of virtualization through the docker daemon. It is recommended to run containers in this mode when their networking performance is critical, for example, a production Load Balancer or a High Performance Web Server.

Note

: --network="host" gives the container full access to local system services such as D-bus and is therefore considered insecure.

Network: container

With the network set to container a container will share the network stack of another container. The other container's name must be provided in the format of --network container:<name|id>. Note that --add-host --hostname --dns --dns-search --dns-option and --mac-address are invalid in container netmode, and --publish --publish-all --expose are also invalid in container netmode.

Example running a Redis container with Redis binding to localhost then running the redis-cli command and connecting to the Redis server over the localhost interface.

$ docker run -d --name redis example/redis --bind 127.0.0.1
$ # use the redis container's network stack to access localhost
$ docker run --rm -it --network container:redis example/redis-cli -h 127.0.0.1

User-defined network

You can create a network using a Docker network driver or an external network driver plugin. You can connect multiple containers to the same network. Once connected to a user-defined network, the containers can communicate easily using only another container's IP address or name.

For overlay networks or custom plugins that support multi-host connectivity, containers connected to the same multi-host network but launched from different Engines can also communicate in this way.

The following example creates a network using the built-in bridge network driver and running a container in the created network

$ docker network create -d bridge my-net
$ docker run --network=my-net -itd --name=container3 busybox

Managing /etc/hosts

Your container will have lines in /etc/hosts which define the hostname of the container itself as well as localhost and a few other common things. The --add-host flag can be used to add additional lines to /etc/hosts.

$ docker run -it --add-host db-static:86.75.30.9 ubuntu cat /etc/hosts
172.17.0.22     09d03f76bf2c
fe00::0         ip6-localnet
ff00::0         ip6-mcastprefix
ff02::1         ip6-allnodes
ff02::2         ip6-allrouters
127.0.0.1       localhost
::1	            localhost ip6-localhost ip6-loopback
86.75.30.9      db-static

If a container is connected to the default bridge network and linked with other containers, then the container's /etc/hosts file is updated with the linked container's name.

Note

Since Docker may live update the container’s /etc/hosts file, there may be situations when processes inside the container can end up reading an empty or incomplete /etc/hosts file. In most cases, retrying the read again should fix the problem.

Restart policies (--restart)

Using the --restart flag on Docker run you can specify a restart policy for how a container should or should not be restarted on exit.

When a restart policy is active on a container, it will be shown as either Up or Restarting in docker ps. It can also be useful to use docker events to see the restart policy in effect.

Docker supports the following restart policies:

Policy	Result
no	Do not automatically restart the container when it exits. This is the default.
on-failure[:max-retries]	Restart only if the container exits with a non-zero exit status. Optionally, limit the number of restart retries the Docker daemon attempts.
always	Always restart the container regardless of the exit status. When you specify always, the Docker daemon will try to restart the container indefinitely. The container will also always start on daemon startup, regardless of the current state of the container.
unless-stopped	Always restart the container regardless of the exit status, but do not start it on daemon startup if the container has been put to a stopped state before.

An ever increasing delay (double the previous delay, starting at 100 milliseconds) is added before each restart to prevent flooding the server. This means the daemon will wait for 100 ms, then 200 ms, 400, 800, 1600, and so on until either the on-failure limit is hit, or when you docker stop or docker rm -f the container.

If a container is successfully restarted (the container is started and runs for at least 10 seconds), the delay is reset to its default value of 100 ms.

You can specify the maximum amount of times Docker will try to restart the container when using the on-failure policy. The default is that Docker will try forever to restart the container. The number of (attempted) restarts for a container can be obtained via docker inspect. For example, to get the number of restarts for container "my-container";

{% raw %}
$ docker inspect -f "{{ .RestartCount }}" my-container
# 2
{% endraw %}

Or, to get the last time the container was (re)started;

{% raw %}
$ docker inspect -f "{{ .State.StartedAt }}" my-container
# 2015-03-04T23:47:07.691840179Z
{% endraw %}

Combining --restart (restart policy) with the --rm (clean up) flag results in an error. On container restart, attached clients are disconnected. See the examples on using the --rm (clean up) flag later in this page.

Examples

$ docker run --restart=always redis

This will run the redis container with a restart policy of always so that if the container exits, Docker will restart it.

$ docker run --restart=on-failure:10 redis

This will run the redis container with a restart policy of on-failure and a maximum restart count of 10. If the redis container exits with a non-zero exit status more than 10 times in a row Docker will abort trying to restart the container. Providing a maximum restart limit is only valid for the on-failure policy.

Exit Status

The exit code from docker run gives information about why the container failed to run or why it exited. When docker run exits with a non-zero code, the exit codes follow the chroot standard, see below:

125 if the error is with Docker daemon itself

$ docker run --foo busybox; echo $?
# flag provided but not defined: --foo
  See 'docker run --help'.
  125

126 if the contained command cannot be invoked

$ docker run busybox /etc; echo $?
# docker: Error response from daemon: Container command '/etc' could not be invoked.
  126

127 if the contained command cannot be found

$ docker run busybox foo; echo $?
# docker: Error response from daemon: Container command 'foo' not found or does not exist.
  127

Exit code of contained command otherwise

$ docker run busybox /bin/sh -c 'exit 3'; echo $?
# 3

Clean up (--rm)

By default a container's file system persists even after the container exits. This makes debugging a lot easier (since you can inspect the final state) and you retain all your data by default. But if you are running short-term foreground processes, these container file systems can really pile up. If instead you'd like Docker to automatically clean up the container and remove the file system when the container exits, you can add the --rm flag:

--rm=false: Automatically remove the container when it exits (incompatible with -d)

Note

: When you set the --rm flag, Docker also removes the volumes associated with the container when the container is removed. This is similar to running docker rm -v my-container. Only volumes that are specified without a name are removed. For example, with docker run --rm -v /foo -v awesome:/bar busybox top, the volume for /foo will be removed, but the volume for /bar will not. Volumes inherited via --volumes-from will be removed with the same logic -- if the original volume was specified with a name it will not be removed.

Security configuration

--security-opt="label=user:USER"     : Set the label user for the container
--security-opt="label=role:ROLE"     : Set the label role for the container
--security-opt="label=type:TYPE"     : Set the label type for the container
--security-opt="label=level:LEVEL"   : Set the label level for the container
--security-opt="label=disable"       : Turn off label confinement for the container
--security-opt="apparmor=PROFILE"    : Set the apparmor profile to be applied to the container
--security-opt="no-new-privileges:true|false"   : Disable/enable container processes from gaining new privileges
--security-opt="seccomp=unconfined"  : Turn off seccomp confinement for the container
--security-opt="seccomp=profile.json": White listed syscalls seccomp Json file to be used as a seccomp filter

You can override the default labeling scheme for each container by specifying the --security-opt flag. Specifying the level in the following command allows you to share the same content between containers.

$ docker run --security-opt label=level:s0:c100,c200 -it fedora bash

Note

: Automatic translation of MLS labels is not currently supported.

To disable the security labeling for this container versus running with the --privileged flag, use the following command:

$ docker run --security-opt label=disable -it fedora bash

If you want a tighter security policy on the processes within a container, you can specify an alternate type for the container. You could run a container that is only allowed to listen on Apache ports by executing the following command:

$ docker run --security-opt label=type:svirt_apache_t -it centos bash

Note

: You would have to write policy defining a svirt_apache_t type.

If you want to prevent your container processes from gaining additional privileges, you can execute the following command:

$ docker run --security-opt no-new-privileges -it centos bash

This means that commands that raise privileges such as su or sudo will no longer work. It also causes any seccomp filters to be applied later, after privileges have been dropped which may mean you can have a more restrictive set of filters. For more details, see the kernel documentation.

Specify an init process

You can use the --init flag to indicate that an init process should be used as the PID 1 in the container. Specifying an init process ensures the usual responsibilities of an init system, such as reaping zombie processes, are performed inside the created container.

The default init process used is the first docker-init executable found in the system path of the Docker daemon process. This docker-init binary, included in the default installation, is backed by tini.

Specify custom cgroups

Using the --cgroup-parent flag, you can pass a specific cgroup to run a container in. This allows you to create and manage cgroups on their own. You can define custom resources for those cgroups and put containers under a common parent group.

Runtime constraints on resources

The operator can also adjust the performance parameters of the container:

Option	Description
`-m`, `--memory=""`	Memory limit (format: `<number>[<unit>]`). Number is a positive integer. Unit can be one of `b`, `k`, `m`, or `g`. Minimum is 4M.
`--memory-swap=""`	Total memory limit (memory + swap, format: `<number>[<unit>]`). Number is a positive integer. Unit can be one of `b`, `k`, `m`, or `g`.
`--memory-reservation=""`	Memory soft limit (format: `<number>[<unit>]`). Number is a positive integer. Unit can be one of `b`, `k`, `m`, or `g`.
`--kernel-memory=""`	Kernel memory limit (format: `<number>[<unit>]`). Number is a positive integer. Unit can be one of `b`, `k`, `m`, or `g`. Minimum is 4M.
`-c`, `--cpu-shares=0`	CPU shares (relative weight)
`--cpus=0.000`	Number of CPUs. Number is a fractional number. 0.000 means no limit.
`--cpu-period=0`	Limit the CPU CFS (Completely Fair Scheduler) period
`--cpuset-cpus=""`	CPUs in which to allow execution (0-3, 0,1)
`--cpuset-mems=""`	Memory nodes (MEMs) in which to allow execution (0-3, 0,1). Only effective on NUMA systems.
`--cpu-quota=0`	Limit the CPU CFS (Completely Fair Scheduler) quota
`--cpu-rt-period=0`	Limit the CPU real-time period. In microseconds. Requires parent cgroups be set and cannot be higher than parent. Also check rtprio ulimits.
`--cpu-rt-runtime=0`	Limit the CPU real-time runtime. In microseconds. Requires parent cgroups be set and cannot be higher than parent. Also check rtprio ulimits.
`--blkio-weight=0`	Block IO weight (relative weight) accepts a weight value between 10 and 1000.
`--blkio-weight-device=""`	Block IO weight (relative device weight, format: `DEVICE_NAME:WEIGHT`)
`--device-read-bps=""`	Limit read rate from a device (format: `<device-path>:<number>[<unit>]`). Number is a positive integer. Unit can be one of `kb`, `mb`, or `gb`.
`--device-write-bps=""`	Limit write rate to a device (format: `<device-path>:<number>[<unit>]`). Number is a positive integer. Unit can be one of `kb`, `mb`, or `gb`.
`--device-read-iops=""`	Limit read rate (IO per second) from a device (format: `<device-path>:<number>`). Number is a positive integer.
`--device-write-iops=""`	Limit write rate (IO per second) to a device (format: `<device-path>:<number>`). Number is a positive integer.
`--oom-kill-disable=false`	Whether to disable OOM Killer for the container or not.
`--oom-score-adj=0`	Tune container's OOM preferences (-1000 to 1000)
`--memory-swappiness=""`	Tune a container's memory swappiness behavior. Accepts an integer between 0 and 100.
`--shm-size=""`	Size of `/dev/shm`. The format is `<number><unit>`. `number` must be greater than `0`. Unit is optional and can be `b` (bytes), `k` (kilobytes), `m` (megabytes), or `g` (gigabytes). If you omit the unit, the system uses bytes. If you omit the size entirely, the system uses `64m`.

User memory constraints

We have four ways to set user memory usage:

Option	Result
memory=inf, memory-swap=inf (default)	There is no memory limit for the container. The container can use as much memory as needed.
memory=L<inf, memory-swap=inf	(specify memory and set memory-swap as `-1`) The container is not allowed to use more than L bytes of memory, but can use as much swap as is needed (if the host supports swap memory).
*memory=L<inf, memory-swap=2L**	(specify memory without memory-swap) The container is not allowed to use more than L bytes of memory, swap plus memory usage is double of that.
memory=L<inf, memory-swap=S<inf, L<=S	(specify both memory and memory-swap) The container is not allowed to use more than L bytes of memory, swap plus memory usage is limited by S.

Examples:

$ docker run -it ubuntu:14.04 /bin/bash

We set nothing about memory, this means the processes in the container can use as much memory and swap memory as they need.

$ docker run -it -m 300M --memory-swap -1 ubuntu:14.04 /bin/bash

We set memory limit and disabled swap memory limit, this means the processes in the container can use 300M memory and as much swap memory as they need (if the host supports swap memory).

$ docker run -it -m 300M ubuntu:14.04 /bin/bash

We set memory limit only, this means the processes in the container can use 300M memory and 300M swap memory, by default, the total virtual memory size (--memory-swap) will be set as double of memory, in this case, memory + swap would be 2*300M, so processes can use 300M swap memory as well.

$ docker run -it -m 300M --memory-swap 1G ubuntu:14.04 /bin/bash

We set both memory and swap memory, so the processes in the container can use 300M memory and 700M swap memory.

Memory reservation is a kind of memory soft limit that allows for greater sharing of memory. Under normal circumstances, containers can use as much of the memory as needed and are constrained only by the hard limits set with the -m/--memory option. When memory reservation is set, Docker detects memory contention or low memory and forces containers to restrict their consumption to a reservation limit.

Always set the memory reservation value below the hard limit, otherwise the hard limit takes precedence. A reservation of 0 is the same as setting no reservation. By default (without reservation set), memory reservation is the same as the hard memory limit.

Memory reservation is a soft-limit feature and does not guarantee the limit won't be exceeded. Instead, the feature attempts to ensure that, when memory is heavily contended for, memory is allocated based on the reservation hints/setup.

The following example limits the memory (-m) to 500M and sets the memory reservation to 200M.

$ docker run -it -m 500M --memory-reservation 200M ubuntu:14.04 /bin/bash

Under this configuration, when the container consumes memory more than 200M and less than 500M, the next system memory reclaim attempts to shrink container memory below 200M.

The following example set memory reservation to 1G without a hard memory limit.

$ docker run -it --memory-reservation 1G ubuntu:14.04 /bin/bash

The container can use as much memory as it needs. The memory reservation setting ensures the container doesn't consume too much memory for long time, because every memory reclaim shrinks the container's consumption to the reservation.

By default, kernel kills processes in a container if an out-of-memory (OOM) error occurs. To change this behaviour, use the --oom-kill-disable option. Only disable the OOM killer on containers where you have also set the -m/--memory option. If the -m flag is not set, this can result in the host running out of memory and require killing the host's system processes to free memory.

The following example limits the memory to 100M and disables the OOM killer for this container:

$ docker run -it -m 100M --oom-kill-disable ubuntu:14.04 /bin/bash

The following example, illustrates a dangerous way to use the flag:

$ docker run -it --oom-kill-disable ubuntu:14.04 /bin/bash

The container has unlimited memory which can cause the host to run out memory and require killing system processes to free memory. The --oom-score-adj parameter can be changed to select the priority of which containers will be killed when the system is out of memory, with negative scores making them less likely to be killed, and positive scores more likely.

Kernel memory constraints

Kernel memory is fundamentally different than user memory as kernel memory can't be swapped out. The inability to swap makes it possible for the container to block system services by consuming too much kernel memory. Kernel memory includes：

stack pages
slab pages
sockets memory pressure
tcp memory pressure

You can setup kernel memory limit to constrain these kinds of memory. For example, every process consumes some stack pages. By limiting kernel memory, you can prevent new processes from being created when the kernel memory usage is too high.

Kernel memory is never completely independent of user memory. Instead, you limit kernel memory in the context of the user memory limit. Assume "U" is the user memory limit and "K" the kernel limit. There are three possible ways to set limits:

Option	Result
U != 0, K = inf (default)	This is the standard memory limitation mechanism already present before using kernel memory. Kernel memory is completely ignored.
U != 0, K < U	Kernel memory is a subset of the user memory. This setup is useful in deployments where the total amount of memory per-cgroup is overcommitted. Overcommitting kernel memory limits is definitely not recommended, since the box can still run out of non-reclaimable memory. In this case, you can configure K so that the sum of all groups is never greater than the total memory. Then, freely set U at the expense of the system's service quality.
U != 0, K > U	Since kernel memory charges are also fed to the user counter and reclamation is triggered for the container for both kinds of memory. This configuration gives the admin a unified view of memory. It is also useful for people who just want to track kernel memory usage.

Examples:

$ docker run -it -m 500M --kernel-memory 50M ubuntu:14.04 /bin/bash

We set memory and kernel memory, so the processes in the container can use 500M memory in total, in this 500M memory, it can be 50M kernel memory tops.

$ docker run -it --kernel-memory 50M ubuntu:14.04 /bin/bash

We set kernel memory without -m, so the processes in the container can use as much memory as they want, but they can only use 50M kernel memory.

Swappiness constraint

By default, a container's kernel can swap out a percentage of anonymous pages. To set this percentage for a container, specify a --memory-swappiness value between 0 and 100. A value of 0 turns off anonymous page swapping. A value of 100 sets all anonymous pages as swappable. By default, if you are not using --memory-swappiness, memory swappiness value will be inherited from the parent.

For example, you can set:

$ docker run -it --memory-swappiness=0 ubuntu:14.04 /bin/bash

Setting the --memory-swappiness option is helpful when you want to retain the container's working set and to avoid swapping performance penalties.

By default, all containers get the same proportion of CPU cycles. This proportion can be modified by changing the container's CPU share weighting relative to the weighting of all other running containers.

To modify the proportion from the default of 1024, use the -c or --cpu-shares flag to set the weighting to 2 or higher. If 0 is set, the system will ignore the value and use the default of 1024.

The proportion will only apply when CPU-intensive processes are running. When tasks in one container are idle, other containers can use the left-over CPU time. The actual amount of CPU time will vary depending on the number of containers running on the system.

For example, consider three containers, one has a cpu-share of 1024 and two others have a cpu-share setting of 512. When processes in all three containers attempt to use 100% of CPU, the first container would receive 50% of the total CPU time. If you add a fourth container with a cpu-share of 1024, the first container only gets 33% of the CPU. The remaining containers receive 16.5%, 16.5% and 33% of the CPU.

On a multi-core system, the shares of CPU time are distributed over all CPU cores. Even if a container is limited to less than 100% of CPU time, it can use 100% of each individual CPU core.

For example, consider a system with more than three cores. If you start one container {C0} with -c=512 running one process, and another container {C1} with -c=1024 running two processes, this can result in the following division of CPU shares:

PID    container	CPU	CPU share
100    {C0}		0	100% of CPU0
101    {C1}		1	100% of CPU1
102    {C1}		2	100% of CPU2

CPU period constraint

The default CPU CFS (Completely Fair Scheduler) period is 100ms. We can use --cpu-period to set the period of CPUs to limit the container's CPU usage. And usually --cpu-period should work with --cpu-quota.

Examples:

$ docker run -it --cpu-period=50000 --cpu-quota=25000 ubuntu:14.04 /bin/bash

If there is 1 CPU, this means the container can get 50% CPU worth of run-time every 50ms.

In addition to use --cpu-period and --cpu-quota for setting CPU period constraints, it is possible to specify --cpus with a float number to achieve the same purpose. For example, if there is 1 CPU, then --cpus=0.5 will achieve the same result as setting --cpu-period=50000 and --cpu-quota=25000 (50% CPU).

The default value for --cpus is 0.000, which means there is no limit.

For more information, see the CFS documentation on bandwidth limiting.

Cpuset constraint

We can set cpus in which to allow execution for containers.

Examples:

$ docker run -it --cpuset-cpus="1,3" ubuntu:14.04 /bin/bash

This means processes in container can be executed on cpu 1 and cpu 3.

$ docker run -it --cpuset-cpus="0-2" ubuntu:14.04 /bin/bash

This means processes in container can be executed on cpu 0, cpu 1 and cpu 2.

We can set mems in which to allow execution for containers. Only effective on NUMA systems.

Examples:

$ docker run -it --cpuset-mems="1,3" ubuntu:14.04 /bin/bash

This example restricts the processes in the container to only use memory from memory nodes 1 and 3.

$ docker run -it --cpuset-mems="0-2" ubuntu:14.04 /bin/bash

This example restricts the processes in the container to only use memory from memory nodes 0, 1 and 2.

CPU quota constraint

The --cpu-quota flag limits the container's CPU usage. The default 0 value allows the container to take 100% of a CPU resource (1 CPU). The CFS (Completely Fair Scheduler) handles resource allocation for executing processes and is default Linux Scheduler used by the kernel. Set this value to 50000 to limit the container to 50% of a CPU resource. For multiple CPUs, adjust the --cpu-quota as necessary. For more information, see the CFS documentation on bandwidth limiting.

Block IO bandwidth (Blkio) constraint

By default, all containers get the same proportion of block IO bandwidth (blkio). This proportion is 500. To modify this proportion, change the container's blkio weight relative to the weighting of all other running containers using the --blkio-weight flag.

Note: The blkio weight setting is only available for direct IO. Buffered IO is not currently supported.

The --blkio-weight flag can set the weighting to a value between 10 to 1000. For example, the commands below create two containers with different blkio weight:

$ docker run -it --name c1 --blkio-weight 300 ubuntu:14.04 /bin/bash
$ docker run -it --name c2 --blkio-weight 600 ubuntu:14.04 /bin/bash

If you do block IO in the two containers at the same time, by, for example:

$ time dd if=/mnt/zerofile of=test.out bs=1M count=1024 oflag=direct

You'll find that the proportion of time is the same as the proportion of blkio weights of the two containers.

The --blkio-weight-device="DEVICE_NAME:WEIGHT" flag sets a specific device weight. The DEVICE_NAME:WEIGHT is a string containing a colon-separated device name and weight. For example, to set /dev/sda device weight to 200:

$ docker run -it \
    --blkio-weight-device "/dev/sda:200" \
    ubuntu

If you specify both the --blkio-weight and --blkio-weight-device, Docker uses the --blkio-weight as the default weight and uses --blkio-weight-device to override this default with a new value on a specific device. The following example uses a default weight of 300 and overrides this default on /dev/sda setting that weight to 200:

$ docker run -it \
    --blkio-weight 300 \
    --blkio-weight-device "/dev/sda:200" \
    ubuntu

The --device-read-bps flag limits the read rate (bytes per second) from a device. For example, this command creates a container and limits the read rate to 1mb per second from /dev/sda:

$ docker run -it --device-read-bps /dev/sda:1mb ubuntu

The --device-write-bps flag limits the write rate (bytes per second)to a device. For example, this command creates a container and limits the write rate to 1mb per second for /dev/sda:

$ docker run -it --device-write-bps /dev/sda:1mb ubuntu

Both flags take limits in the <device-path>:<limit>[unit] format. Both read and write rates must be a positive integer. You can specify the rate in kb (kilobytes), mb (megabytes), or gb (gigabytes).

The --device-read-iops flag limits read rate (IO per second) from a device. For example, this command creates a container and limits the read rate to 1000 IO per second from /dev/sda:

$ docker run -ti --device-read-iops /dev/sda:1000 ubuntu

The --device-write-iops flag limits write rate (IO per second) to a device. For example, this command creates a container and limits the write rate to 1000 IO per second to /dev/sda:

$ docker run -ti --device-write-iops /dev/sda:1000 ubuntu

Both flags take limits in the <device-path>:<limit> format. Both read and write rates must be a positive integer.

Additional groups

--group-add: Add additional groups to run as

By default, the docker container process runs with the supplementary groups looked up for the specified user. If one wants to add more to that list of groups, then one can use this flag:

$ docker run --rm --group-add audio --group-add nogroup --group-add 777 busybox id
uid=0(root) gid=0(root) groups=10(wheel),29(audio),99(nogroup),777

Runtime privilege and Linux capabilities

--cap-add: Add Linux capabilities
--cap-drop: Drop Linux capabilities
--privileged=false: Give extended privileges to this container
--device=[]: Allows you to run devices inside the container without the --privileged flag.

By default, Docker containers are "unprivileged" and cannot, for example, run a Docker daemon inside a Docker container. This is because by default a container is not allowed to access any devices, but a "privileged" container is given access to all devices (see the documentation on cgroups devices).

When the operator executes docker run --privileged, Docker will enable to access to all devices on the host as well as set some configuration in AppArmor or SELinux to allow the container nearly all the same access to the host as processes running outside containers on the host. Additional information about running with --privileged is available on the Docker Blog.

If you want to limit access to a specific device or devices you can use the --device flag. It allows you to specify one or more devices that will be accessible within the container.

$ docker run --device=/dev/snd:/dev/snd ...

By default, the container will be able to read, write, and mknod these devices. This can be overridden using a third :rwm set of options to each --device flag:

$ docker run --device=/dev/sda:/dev/xvdc --rm -it ubuntu fdisk  /dev/xvdc

Command (m for help): q
$ docker run --device=/dev/sda:/dev/xvdc:r --rm -it ubuntu fdisk  /dev/xvdc
You will not be able to write the partition table.

Command (m for help): q

$ docker run --device=/dev/sda:/dev/xvdc:w --rm -it ubuntu fdisk  /dev/xvdc
    crash....

$ docker run --device=/dev/sda:/dev/xvdc:m --rm -it ubuntu fdisk  /dev/xvdc
fdisk: unable to open /dev/xvdc: Operation not permitted

In addition to --privileged, the operator can have fine grain control over the capabilities using --cap-add and --cap-drop. By default, Docker has a default list of capabilities that are kept. The following table lists the Linux capability options which are allowed by default and can be dropped.

Capability Key	Capability Description
SETPCAP	Modify process capabilities.
MKNOD	Create special files using mknod(2).
AUDIT_WRITE	Write records to kernel auditing log.
CHOWN	Make arbitrary changes to file UIDs and GIDs (see chown(2)).
NET_RAW	Use RAW and PACKET sockets.
DAC_OVERRIDE	Bypass file read, write, and execute permission checks.
FOWNER	Bypass permission checks on operations that normally require the file system UID of the process to match the UID of the file.
FSETID	Don't clear set-user-ID and set-group-ID permission bits when a file is modified.
KILL	Bypass permission checks for sending signals.
SETGID	Make arbitrary manipulations of process GIDs and supplementary GID list.
SETUID	Make arbitrary manipulations of process UIDs.
NET_BIND_SERVICE	Bind a socket to internet domain privileged ports (port numbers less than 1024).
SYS_CHROOT	Use chroot(2), change root directory.
SETFCAP	Set file capabilities.

The next table shows the capabilities which are not granted by default and may be added.

Capability Key	Capability Description
SYS_MODULE	Load and unload kernel modules.
SYS_RAWIO	Perform I/O port operations (iopl(2) and ioperm(2)).
SYS_PACCT	Use acct(2), switch process accounting on or off.
SYS_ADMIN	Perform a range of system administration operations.
SYS_NICE	Raise process nice value (nice(2), setpriority(2)) and change the nice value for arbitrary processes.
SYS_RESOURCE	Override resource Limits.
SYS_TIME	Set system clock (settimeofday(2), stime(2), adjtimex(2)); set real-time (hardware) clock.
SYS_TTY_CONFIG	Use vhangup(2); employ various privileged ioctl(2) operations on virtual terminals.
AUDIT_CONTROL	Enable and disable kernel auditing; change auditing filter rules; retrieve auditing status and filtering rules.
MAC_OVERRIDE	Allow MAC configuration or state changes. Implemented for the Smack LSM.
MAC_ADMIN	Override Mandatory Access Control (MAC). Implemented for the Smack Linux Security Module (LSM).
NET_ADMIN	Perform various network-related operations.
SYSLOG	Perform privileged syslog(2) operations.
DAC_READ_SEARCH	Bypass file read permission checks and directory read and execute permission checks.
LINUX_IMMUTABLE	Set the FS_APPEND_FL and FS_IMMUTABLE_FL i-node flags.
NET_BROADCAST	Make socket broadcasts, and listen to multicasts.
IPC_LOCK	Lock memory (mlock(2), mlockall(2), mmap(2), shmctl(2)).
IPC_OWNER	Bypass permission checks for operations on System V IPC objects.
SYS_PTRACE	Trace arbitrary processes using ptrace(2).
SYS_BOOT	Use reboot(2) and kexec_load(2), reboot and load a new kernel for later execution.
LEASE	Establish leases on arbitrary files (see fcntl(2)).
WAKE_ALARM	Trigger something that will wake up the system.
BLOCK_SUSPEND	Employ features that can block system suspend.

Further reference information is available on the capabilities(7) - Linux man page

Both flags support the value ALL, so if the operator wants to have all capabilities but MKNOD they could use:

$ docker run --cap-add=ALL --cap-drop=MKNOD ...

For interacting with the network stack, instead of using --privileged they should use --cap-add=NET_ADMIN to modify the network interfaces.

$ docker run -it --rm  ubuntu:14.04 ip link add dummy0 type dummy
RTNETLINK answers: Operation not permitted
$ docker run -it --rm --cap-add=NET_ADMIN ubuntu:14.04 ip link add dummy0 type dummy

To mount a FUSE based filesystem, you need to combine both --cap-add and --device:

$ docker run --rm -it --cap-add SYS_ADMIN sshfs sshfs sven@10.10.10.20:/home/sven /mnt
fuse: failed to open /dev/fuse: Operation not permitted
$ docker run --rm -it --device /dev/fuse sshfs sshfs sven@10.10.10.20:/home/sven /mnt
fusermount: mount failed: Operation not permitted
$ docker run --rm -it --cap-add SYS_ADMIN --device /dev/fuse sshfs
# sshfs sven@10.10.10.20:/home/sven /mnt
The authenticity of host '10.10.10.20 (10.10.10.20)' can't be established.
ECDSA key fingerprint is 25:34:85:75:25:b0:17:46:05:19:04:93:b5:dd:5f:c6.
Are you sure you want to continue connecting (yes/no)? yes
sven@10.10.10.20's password:
root@30aa0cfaf1b5:/# ls -la /mnt/src/docker
total 1516
drwxrwxr-x 1 1000 1000   4096 Dec  4 06:08 .
drwxrwxr-x 1 1000 1000   4096 Dec  4 11:46 ..
-rw-rw-r-- 1 1000 1000     16 Oct  8 00:09 .dockerignore
-rwxrwxr-x 1 1000 1000    464 Oct  8 00:09 .drone.yml
drwxrwxr-x 1 1000 1000   4096 Dec  4 06:11 .git
-rw-rw-r-- 1 1000 1000    461 Dec  4 06:08 .gitignore
....

The default seccomp profile will adjust to the selected capabilities, in order to allow use of facilities allowed by the capabilities, so you should not have to adjust this, since Docker 1.12. In Docker 1.10 and 1.11 this did not happen and it may be necessary to use a custom seccomp profile or use --security-opt seccomp=unconfined when adding capabilities.

Logging drivers (--log-driver)

The container can have a different logging driver than the Docker daemon. Use the --log-driver=VALUE with the docker run command to configure the container's logging driver. The following options are supported:

Driver	Description
`none`	Disables any logging for the container. `docker logs` won't be available with this driver.
`json-file`	Default logging driver for Docker. Writes JSON messages to file. No logging options are supported for this driver.
`syslog`	Syslog logging driver for Docker. Writes log messages to syslog.
`journald`	Journald logging driver for Docker. Writes log messages to `journald`.
`gelf`	Graylog Extended Log Format (GELF) logging driver for Docker. Writes log messages to a GELF endpoint likeGraylog or Logstash.
`fluentd`	Fluentd logging driver for Docker. Writes log messages to `fluentd` (forward input).
`awslogs`	Amazon CloudWatch Logs logging driver for Docker. Writes log messages to Amazon CloudWatch Logs
`splunk`	Splunk logging driver for Docker. Writes log messages to `splunk` using Event Http Collector.

The docker logs command is available only for the json-file and journald logging drivers. For detailed information on working with logging drivers, see Configure a logging driver.

Overriding Dockerfile image defaults

When a developer builds an image from a Dockerfile or when she commits it, the developer can set a number of default parameters that take effect when the image starts up as a container.

Four of the Dockerfile commands cannot be overridden at runtime: FROM, MAINTAINER, RUN, and ADD. Everything else has a corresponding override in docker run. We'll go through what the developer might have set in each Dockerfile instruction and how the operator can override that setting.

CMD (Default Command or Options)
ENTRYPOINT (Default Command to Execute at Runtime)
EXPOSE (Incoming Ports)
ENV (Environment Variables)
HEALTHCHECK
VOLUME (Shared Filesystems)
USER
WORKDIR

CMD (default command or options)

Recall the optional COMMAND in the Docker commandline:

$ docker run [OPTIONS] IMAGE[:TAG|@DIGEST] [COMMAND] [ARG...]

This command is optional because the person who created the IMAGE may have already provided a default COMMAND using the Dockerfile CMD instruction. As the operator (the person running a container from the image), you can override that CMD instruction just by specifying a new COMMAND.

If the image also specifies an ENTRYPOINT then the CMD or COMMAND get appended as arguments to the ENTRYPOINT.

ENTRYPOINT (default command to execute at runtime)

--entrypoint="": Overwrite the default entrypoint set by the image

The ENTRYPOINT of an image is similar to a COMMAND because it specifies what executable to run when the container starts, but it is (purposely) more difficult to override. The ENTRYPOINT gives a container its default nature or behavior, so that when you set an ENTRYPOINT you can run the container as if it were that binary, complete with default options, and you can pass in more options via the COMMAND. But, sometimes an operator may want to run something else inside the container, so you can override the default ENTRYPOINT at runtime by using a string to specify the new ENTRYPOINT. Here is an example of how to run a shell in a container that has been set up to automatically run something else (like /usr/bin/redis-server):

$ docker run -it --entrypoint /bin/bash example/redis

or two examples of how to pass more parameters to that ENTRYPOINT:

$ docker run -it --entrypoint /bin/bash example/redis -c ls -l
$ docker run -it --entrypoint /usr/bin/redis-cli example/redis --help

You can reset a containers entrypoint by passing an empty string, for example:

$ docker run -it --entrypoint="" mysql bash

Note

: Passing --entrypoint will clear out any default command set on the image (i.e. any CMD instruction in the Dockerfile used to build it).

EXPOSE (incoming ports)

The following run command options work with container networking:

--expose=[]: Expose a port or a range of ports inside the container.
             These are additional to those exposed by the `EXPOSE` instruction
-P         : Publish all exposed ports to the host interfaces
-p=[]      : Publish a container᾿s port or a range of ports to the host
               format: ip:hostPort:containerPort | ip::containerPort | hostPort:containerPort | containerPort
               Both hostPort and containerPort can be specified as a
               range of ports. When specifying ranges for both, the
               number of container ports in the range must match the
               number of host ports in the range, for example:
                   -p 1234-1236:1234-1236/tcp

               When specifying a range for hostPort only, the
               containerPort must not be a range.  In this case the
               container port is published somewhere within the
               specified hostPort range. (e.g., `-p 1234-1236:1234/tcp`)

               (use 'docker port' to see the actual mapping)

--link=""  : Add link to another container (<name or id>:alias or <name or id>)

With the exception of the EXPOSE directive, an image developer hasn't got much control over networking. The EXPOSE instruction defines the initial incoming ports that provide services. These ports are available to processes inside the container. An operator can use the --expose option to add to the exposed ports.

To expose a container's internal port, an operator can start the container with the -P or -p flag. The exposed port is accessible on the host and the ports are available to any client that can reach the host.

The -P option publishes all the ports to the host interfaces. Docker binds each exposed port to a random port on the host. The range of ports are within an ephemeral port range defined by /proc/sys/net/ipv4/ip_local_port_range. Use the -p flag to explicitly map a single port or range of ports.

The port number inside the container (where the service listens) does not need to match the port number exposed on the outside of the container (where clients connect). For example, inside the container an HTTP service is listening on port 80 (and so the image developer specifies EXPOSE 80 in the Dockerfile). At runtime, the port might be bound to 42800 on the host. To find the mapping between the host ports and the exposed ports, use docker port.

If the operator uses --link when starting a new client container in the default bridge network, then the client container can access the exposed port via a private networking interface. If --link is used when starting a container in a user-defined network as described in Docker network overview, it will provide a named alias for the container being linked to.

ENV (environment variables)

Docker automatically sets some environment variables when creating a Linux container. Docker does not set any environment variables when creating a Windows container.

The following environment variables are set for Linux containers:

Variable	Value
`HOME`	Set based on the value of `USER`
`HOSTNAME`	The hostname associated with the container
`PATH`	Includes popular directories, such as `/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin`
`TERM`	`xterm` if the container is allocated a pseudo-TTY

Additionally, the operator can set any environment variable in the container by using one or more -e flags, even overriding those mentioned above, or already defined by the developer with a Dockerfile ENV:

$ docker run -e "deep=purple" --rm alpine env
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
HOSTNAME=d2219b854598
deep=purple
HOME=/root

PS C:\> docker run --rm -e "foo=bar" microsoft/nanoserver cmd /s /c set
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\ContainerAdministrator\AppData\Roaming
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=C2FAEFCC8253
ComSpec=C:\Windows\system32\cmd.exe
foo=bar
LOCALAPPDATA=C:\Users\ContainerAdministrator\AppData\Local
NUMBER_OF_PROCESSORS=8
OS=Windows_NT
Path=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Users\ContainerAdministrator\AppData\Local\Microsoft\WindowsApps
PATHEXT=.COM;.EXE;.BAT;.CMD
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 62 Stepping 4, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=3e04
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PUBLIC=C:\Users\Public
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\ContainerAdministrator\AppData\Local\Temp
TMP=C:\Users\ContainerAdministrator\AppData\Local\Temp
USERDOMAIN=User Manager
USERNAME=ContainerAdministrator
USERPROFILE=C:\Users\ContainerAdministrator
windir=C:\Windows

Similarly the operator can set the HOSTNAME (Linux) or COMPUTERNAME (Windows) with -h.

HEALTHCHECK

  --health-cmd            Command to run to check health
  --health-interval       Time between running the check
  --health-retries        Consecutive failures needed to report unhealthy
  --health-timeout        Maximum time to allow one check to run
  --health-start-period   Start period for the container to initialize before starting health-retries countdown
  --no-healthcheck        Disable any container-specified HEALTHCHECK

Example:

{% raw %}
$ docker run --name=test -d \
    --health-cmd='stat /etc/passwd || exit 1' \
    --health-interval=2s \
    busybox sleep 1d
$ sleep 2; docker inspect --format='{{.State.Health.Status}}' test
healthy
$ docker exec test rm /etc/passwd
$ sleep 2; docker inspect --format='{{json .State.Health}}' test
{
  "Status": "unhealthy",
  "FailingStreak": 3,
  "Log": [
    {
      "Start": "2016-05-25T17:22:04.635478668Z",
      "End": "2016-05-25T17:22:04.7272552Z",
      "ExitCode": 0,
      "Output": "  File: /etc/passwd\n  Size: 334       \tBlocks: 8          IO Block: 4096   regular file\nDevice: 32h/50d\tInode: 12          Links: 1\nAccess: (0664/-rw-rw-r--)  Uid: (    0/    root)   Gid: (    0/    root)\nAccess: 2015-12-05 22:05:32.000000000\nModify: 2015..."
    },
    {
      "Start": "2016-05-25T17:22:06.732900633Z",
      "End": "2016-05-25T17:22:06.822168935Z",
      "ExitCode": 0,
      "Output": "  File: /etc/passwd\n  Size: 334       \tBlocks: 8          IO Block: 4096   regular file\nDevice: 32h/50d\tInode: 12          Links: 1\nAccess: (0664/-rw-rw-r--)  Uid: (    0/    root)   Gid: (    0/    root)\nAccess: 2015-12-05 22:05:32.000000000\nModify: 2015..."
    },
    {
      "Start": "2016-05-25T17:22:08.823956535Z",
      "End": "2016-05-25T17:22:08.897359124Z",
      "ExitCode": 1,
      "Output": "stat: can't stat '/etc/passwd': No such file or directory\n"
    },
    {
      "Start": "2016-05-25T17:22:10.898802931Z",
      "End": "2016-05-25T17:22:10.969631866Z",
      "ExitCode": 1,
      "Output": "stat: can't stat '/etc/passwd': No such file or directory\n"
    },
    {
      "Start": "2016-05-25T17:22:12.971033523Z",
      "End": "2016-05-25T17:22:13.082015516Z",
      "ExitCode": 1,
      "Output": "stat: can't stat '/etc/passwd': No such file or directory\n"
    }
  ]
}
{% endraw %}

The health status is also displayed in the docker ps output.

TMPFS (mount tmpfs filesystems)

--tmpfs=[]: Create a tmpfs mount with: container-dir[:<options>],
            where the options are identical to the Linux
            'mount -t tmpfs -o' command.

The example below mounts an empty tmpfs into the container with the rw, noexec, nosuid, and size=65536k options.

$ docker run -d --tmpfs /run:rw,noexec,nosuid,size=65536k my_image

VOLUME (shared filesystems)

-v, --volume=[host-src:]container-dest[:<options>]: Bind mount a volume.
The comma-delimited `options` are [rw|ro], [z|Z],
[[r]shared|[r]slave|[r]private], and [nocopy].
The 'host-src' is an absolute path or a name value.

If neither 'rw' or 'ro' is specified then the volume is mounted in
read-write mode.

The `nocopy` modes is used to disable automatic copying requested volume
path in the container to the volume storage location.
For named volumes, `copy` is the default mode. Copy modes are not supported
for bind-mounted volumes.

--volumes-from="": Mount all volumes from the given container(s)

Note

: When using systemd to manage the Docker daemon's start and stop, in the systemd unit file there is an option to control mount propagation for the Docker daemon itself, called MountFlags. The value of this setting may cause Docker to not see mount propagation changes made on the mount point. For example, if this value is slave, you may not be able to use the shared or rshared propagation on a volume.

The volumes commands are complex enough to have their own documentation in section Manage data in containers. A developer can define one or more VOLUME's associated with an image, but only the operator can give access from one container to another (or from a container to a volume mounted on the host).

The container-dest must always be an absolute path such as /src/docs. The host-src can either be an absolute path or a name value. If you supply an absolute path for the host-dir, Docker bind-mounts to the path you specify. If you supply a name, Docker creates a named volume by that name.

A name value must start with an alphanumeric character, followed by a-z0-9, _ (underscore), . (period) or - (hyphen). An absolute path starts with a / (forward slash).

For example, you can specify either /foo or foo for a host-src value. If you supply the /foo value, Docker creates a bind-mount. If you supply the foo specification, Docker creates a named volume.

USER

root (id = 0) is the default user within a container. The image developer can create additional users. Those users are accessible by name. When passing a numeric ID, the user does not have to exist in the container.

The developer can set a default user to run the first process with the Dockerfile USER instruction. When starting a container, the operator can override the USER instruction by passing the -u option.

-u="", --user="": Sets the username or UID used and optionally the groupname or GID for the specified command.

The followings examples are all valid:
--user=[ user | user:group | uid | uid:gid | user:gid | uid:group ]

Note: if you pass a numeric uid, it must be in the range of 0-2147483647.

WORKDIR

The default working directory for running binaries within a container is the root directory (/), but the developer can set a different default with the Dockerfile WORKDIR command. The operator can override this with:

-w="": Working directory inside the container

74 KiB Raw Blame History Unescape Escape

Docker run reference

General form

Operator exclusive options

Detached vs foreground

Detached (-d)

Foreground

Container identification

Name (--name)

PID equivalent

Image[:tag]

Image[@digest]

PID settings (--pid)

Example: run htop inside a container

Example

UTS settings (--uts)

IPC settings (--ipc)

Network settings

Network: none

Network: bridge

Network: host

Network: container

User-defined network

Managing /etc/hosts

Restart policies (--restart)

Examples

Exit Status

Clean up (--rm)

Security configuration

Specify an init process

Specify custom cgroups

Runtime constraints on resources

User memory constraints

Kernel memory constraints

Swappiness constraint

CPU share constraint

CPU period constraint

Cpuset constraint

CPU quota constraint

Block IO bandwidth (Blkio) constraint

Additional groups

Runtime privilege and Linux capabilities

Logging drivers (--log-driver)

Overriding Dockerfile image defaults

CMD (default command or options)

ENTRYPOINT (default command to execute at runtime)

EXPOSE (incoming ports)

ENV (environment variables)

HEALTHCHECK

TMPFS (mount tmpfs filesystems)

VOLUME (shared filesystems)

USER

WORKDIR

74 KiB

Raw Blame History