2.change schema into scheme in docs and some annotations. Signed-off-by: allencloud <allen.sun@daocloud.io>
14 KiB
build
Usage: docker build [OPTIONS] PATH | URL | -
Build a new image from the source code at PATH
--build-arg=[] Set build-time variables
--cpu-shares CPU Shares (relative weight)
--cgroup-parent="" Optional parent cgroup for the container
--cpu-period=0 Limit the CPU CFS (Completely Fair Scheduler) period
--cpu-quota=0 Limit the CPU CFS (Completely Fair Scheduler) quota
--cpuset-cpus="" CPUs in which to allow execution, e.g. `0-3`, `0,1`
--cpuset-mems="" MEMs in which to allow execution, e.g. `0-3`, `0,1`
--disable-content-trust=true Skip image verification
-f, --file="" Name of the Dockerfile (Default is 'PATH/Dockerfile')
--force-rm Always remove intermediate containers
--help Print usage
--isolation="" Container isolation technology
--label=[] Set metadata for an image
-m, --memory="" Memory limit for all build containers
--memory-swap="" A positive integer equal to memory plus swap. Specify -1 to enable unlimited swap.
--no-cache Do not use cache when building the image
--pull Always attempt to pull a newer version of the image
-q, --quiet Suppress the build output and print image ID on success
--rm=true Remove intermediate containers after a successful build
--shm-size=[] Size of `/dev/shm`. The format is `<number><unit>`. `number` must be greater than `0`. Unit is optional and can be `b` (bytes), `k` (kilobytes), `m` (megabytes), or `g` (gigabytes). If you omit the unit, the system uses bytes. If you omit the size entirely, the system uses `64m`.
-t, --tag=[] Name and optionally a tag in the 'name:tag' format
--ulimit=[] Ulimit options
Builds Docker images from a Dockerfile and a "context". A build's context is
the files located in the specified PATH
or URL
. The build process can refer
to any of the files in the context. For example, your build can use an
ADD instruction to reference a file in the
context.
The URL
parameter can specify the location of a Git repository; the repository
acts as the build context. The system recursively clones the repository and its
submodules using a git clone --depth 1 --recursive
command. This command runs
in a temporary directory on your local host. After the command succeeds, the
directory is sent to the Docker daemon as the context. Local clones give you the
ability to access private repositories using local user credentials, VPNs, and
so forth.
Git URLs accept context configuration in their fragment section, separated by a
colon :
. The first part represents the reference that Git will check out,
this can be either a branch, a tag, or a commit SHA. The second part represents
a subdirectory inside the repository that will be used as a build context.
For example, run this command to use a directory called docker
in the branch
container
:
$ docker build https://github.com/docker/rootfs.git#container:docker
The following table represents all the valid suffixes with their build contexts:
Build Syntax Suffix | Commit Used | Build Context Used |
---|---|---|
myrepo.git |
refs/heads/master |
/ |
myrepo.git#mytag |
refs/tags/mytag |
/ |
myrepo.git#mybranch |
refs/heads/mybranch |
/ |
myrepo.git#abcdef |
sha1 = abcdef |
/ |
myrepo.git#:myfolder |
refs/heads/master |
/myfolder |
myrepo.git#master:myfolder |
refs/heads/master |
/myfolder |
myrepo.git#mytag:myfolder |
refs/tags/mytag |
/myfolder |
myrepo.git#mybranch:myfolder |
refs/heads/mybranch |
/myfolder |
myrepo.git#abcdef:myfolder |
sha1 = abcdef |
/myfolder |
Instead of specifying a context, you can pass a single Dockerfile in the URL
or pipe the file in via STDIN
. To pipe a Dockerfile from STDIN
:
docker build - < Dockerfile
If you use STDIN or specify a URL
, the system places the contents into a file
called Dockerfile
, and any -f
, --file
option is ignored. In this
scenario, there is no context.
By default the docker build
command will look for a Dockerfile
at the root
of the build context. The -f
, --file
, option lets you specify the path to
an alternative file to use instead. This is useful in cases where the same set
of files are used for multiple builds. The path must be to a file within the
build context. If a relative path is specified then it must to be relative to
the current directory.
In most cases, it's best to put each Dockerfile in an empty directory. Then,
add to that directory only the files needed for building the Dockerfile. To
increase the build's performance, you can exclude files and directories by
adding a .dockerignore
file to that directory as well. For information on
creating one, see the .dockerignore file.
If the Docker client loses connection to the daemon, the build is canceled.
This happens if you interrupt the Docker client with CTRL-c
or if the Docker
client is killed for any reason. If the build initiated a pull which is still
running at the time the build is cancelled, the pull is cancelled as well.
Return code
On a successful build, a return code of success 0
will be returned. When the
build fails, a non-zero failure code will be returned.
There should be informational output of the reason for failure output to
STDERR
:
$ docker build -t fail .
Sending build context to Docker daemon 2.048 kB
Sending build context to Docker daemon
Step 1 : FROM busybox
---> 4986bf8c1536
Step 2 : RUN exit 13
---> Running in e26670ec7a0a
INFO[0000] The command [/bin/sh -c exit 13] returned a non-zero code: 13
$ echo $?
1
See also:
Examples
Build with PATH
$ docker build .
Uploading context 10240 bytes
Step 1 : FROM busybox
Pulling repository busybox
---> e9aa60c60128MB/2.284 MB (100%) endpoint: https://cdn-registry-1.docker.io/v1/
Step 2 : RUN ls -lh /
---> Running in 9c9e81692ae9
total 24
drwxr-xr-x 2 root root 4.0K Mar 12 2013 bin
drwxr-xr-x 5 root root 4.0K Oct 19 00:19 dev
drwxr-xr-x 2 root root 4.0K Oct 19 00:19 etc
drwxr-xr-x 2 root root 4.0K Nov 15 23:34 lib
lrwxrwxrwx 1 root root 3 Mar 12 2013 lib64 -> lib
dr-xr-xr-x 116 root root 0 Nov 15 23:34 proc
lrwxrwxrwx 1 root root 3 Mar 12 2013 sbin -> bin
dr-xr-xr-x 13 root root 0 Nov 15 23:34 sys
drwxr-xr-x 2 root root 4.0K Mar 12 2013 tmp
drwxr-xr-x 2 root root 4.0K Nov 15 23:34 usr
---> b35f4035db3f
Step 3 : CMD echo Hello world
---> Running in 02071fceb21b
---> f52f38b7823e
Successfully built f52f38b7823e
Removing intermediate container 9c9e81692ae9
Removing intermediate container 02071fceb21b
This example specifies that the PATH
is .
, and so all the files in the
local directory get tar
d and sent to the Docker daemon. The PATH
specifies
where to find the files for the "context" of the build on the Docker daemon.
Remember that the daemon could be running on a remote machine and that no
parsing of the Dockerfile happens at the client side (where you're running
docker build
). That means that all the files at PATH
get sent, not just
the ones listed to ADD in the Dockerfile.
The transfer of context from the local machine to the Docker daemon is what the
docker
client means when you see the "Sending build context" message.
If you wish to keep the intermediate containers after the build is complete,
you must use --rm=false
. This does not affect the build cache.
Build with URL
$ docker build github.com/creack/docker-firefox
This will clone the GitHub repository and use the cloned repository as context.
The Dockerfile at the root of the repository is used as Dockerfile. Note that
you can specify an arbitrary Git repository by using the git://
or git@
scheme.
Build with -
$ docker build - < Dockerfile
This will read a Dockerfile from STDIN
without context. Due to the lack of a
context, no contents of any local directory will be sent to the Docker daemon.
Since there is no context, a Dockerfile ADD
only works if it refers to a
remote URL.
$ docker build - < context.tar.gz
This will build an image for a compressed context read from STDIN
. Supported
formats are: bzip2, gzip and xz.
Usage of .dockerignore
$ docker build .
Uploading context 18.829 MB
Uploading context
Step 1 : FROM busybox
---> 769b9341d937
Step 2 : CMD echo Hello world
---> Using cache
---> 99cc1ad10469
Successfully built 99cc1ad10469
$ echo ".git" > .dockerignore
$ docker build .
Uploading context 6.76 MB
Uploading context
Step 1 : FROM busybox
---> 769b9341d937
Step 2 : CMD echo Hello world
---> Using cache
---> 99cc1ad10469
Successfully built 99cc1ad10469
This example shows the use of the .dockerignore
file to exclude the .git
directory from the context. Its effect can be seen in the changed size of the
uploaded context. The builder reference contains detailed information on
creating a .dockerignore file
Tag image (-t)
$ docker build -t vieux/apache:2.0 .
This will build like the previous example, but it will then tag the resulting
image. The repository name will be vieux/apache
and the tag will be 2.0
You can apply multiple tags to an image. For example, you can apply the latest
tag to a newly built image and add another tag that references a specific
version.
For example, to tag an image both as whenry/fedora-jboss:latest
and
whenry/fedora-jboss:v2.1
, use the following:
$ docker build -t whenry/fedora-jboss:latest -t whenry/fedora-jboss:v2.1 .
Specify Dockerfile (-f)
$ docker build -f Dockerfile.debug .
This will use a file called Dockerfile.debug
for the build instructions
instead of Dockerfile
.
$ docker build -f dockerfiles/Dockerfile.debug -t myapp_debug .
$ docker build -f dockerfiles/Dockerfile.prod -t myapp_prod .
The above commands will build the current build context (as specified by the
.
) twice, once using a debug version of a Dockerfile
and once using a
production version.
$ cd /home/me/myapp/some/dir/really/deep
$ docker build -f /home/me/myapp/dockerfiles/debug /home/me/myapp
$ docker build -f ../../../../dockerfiles/debug /home/me/myapp
These two docker build
commands do the exact same thing. They both use the
contents of the debug
file instead of looking for a Dockerfile
and will use
/home/me/myapp
as the root of the build context. Note that debug
is in the
directory structure of the build context, regardless of how you refer to it on
the command line.
Note:
docker build
will return ano such file or directory
error if the file or directory does not exist in the uploaded context. This may happen if there is no context, or if you specify a file that is elsewhere on the Host system. The context is limited to the current directory (and its children) for security reasons, and to ensure repeatable builds on remote Docker hosts. This is also the reason whyADD ../file
will not work.
Optional parent cgroup (--cgroup-parent)
When docker build
is run with the --cgroup-parent
option the containers
used in the build will be run with the corresponding docker run
flag.
Set ulimits in container (--ulimit)
Using the --ulimit
option with docker build
will cause each build step's
container to be started using those --ulimit
flag values.
Set build-time variables (--build-arg)
You can use ENV
instructions in a Dockerfile to define variable
values. These values persist in the built image. However, often
persistence is not what you want. Users want to specify variables differently
depending on which host they build an image on.
A good example is http_proxy
or source versions for pulling intermediate
files. The ARG
instruction lets Dockerfile authors define values that users
can set at build-time using the --build-arg
flag:
$ docker build --build-arg HTTP_PROXY=http://10.20.30.2:1234 .
This flag allows you to pass the build-time variables that are
accessed like regular environment variables in the RUN
instruction of the
Dockerfile. Also, these values don't persist in the intermediate or final images
like ENV
values do.
For detailed information on using ARG
and ENV
instructions, see the
Dockerfile reference.
Specify isolation technology for container (--isolation)
This option is useful in situations where you are running Docker containers on
Windows. The --isolation=<value>
option sets a container's isolation
technology. On Linux, the only supported is the default
option which uses
Linux namespaces. On Microsoft Windows, you can specify these values:
Value | Description |
---|---|
default |
Use the value specified by the Docker daemon's --exec-opt . If the daemon does not specify an isolation technology, Microsoft Windows uses process as its default value. |
process |
Namespace isolation only. |
hyperv |
Hyper-V hypervisor partition-based isolation. |
Specifying the --isolation
flag without a value is the same as setting --isolation="default"
.