1
0
Fork 0
mirror of https://github.com/moby/moby.git synced 2022-11-09 12:21:53 -05:00
moby--moby/docs/userguide/dockerizing.md
Mary Anthony 8fee1c2020 Enabled GitHub Flavored Markdown
GitHub flavored markdown is now supported for links and images. Also, ran LinkChecker and FileResolver. Yay!
Fixes from Spider check
Output for docker/docker now goes into engine directory

Signed-off-by: Mary Anthony <mary@docker.com>
2015-10-11 07:49:54 -07:00

7.1 KiB

Dockerizing applications: A "Hello world"

So what's this Docker thing all about?

Docker allows you to run applications inside containers. Running an application inside a container takes a single command: docker run.

Note

: Depending on your Docker system configuration, you may be required to preface each docker command on this page with sudo. To avoid this behavior, your system administrator can create a Unix group called docker and add users to it.

Hello world

Let's try it now.

$ docker run ubuntu:14.04 /bin/echo 'Hello world'
Hello world

And you just launched your first container!

So what just happened? Let's step through what the docker run command did.

First we specified the docker binary and the command we wanted to execute, run. The docker run combination runs containers.

Next we specified an image: ubuntu:14.04. This is the source of the container we ran. Docker calls this an image. In this case we used an Ubuntu 14.04 operating system image.

When you specify an image, Docker looks first for the image on your Docker host. If it can't find it then it downloads the image from the public image registry: Docker Hub.

Next we told Docker what command to run inside our new container:

/bin/echo 'Hello world'

When our container was launched Docker created a new Ubuntu 14.04 environment and then executed the /bin/echo command inside it. We saw the result on the command line:

Hello world

So what happened to our container after that? Well Docker containers only run as long as the command you specify is active. Here, as soon as Hello world was echoed, the container stopped.

An interactive container

Let's try the docker run command again, this time specifying a new command to run in our container.

$ docker run -t -i ubuntu:14.04 /bin/bash
root@af8bae53bdd3:/#

Here we've again specified the docker run command and launched an ubuntu:14.04 image. But we've also passed in two flags: -t and -i. The -t flag assigns a pseudo-tty or terminal inside our new container and the -i flag allows us to make an interactive connection by grabbing the standard in (STDIN) of the container.

We've also specified a new command for our container to run: /bin/bash. This will launch a Bash shell inside our container.

So now when our container is launched we can see that we've got a command prompt inside it:

root@af8bae53bdd3:/#

Let's try running some commands inside our container:

root@af8bae53bdd3:/# pwd
/
root@af8bae53bdd3:/# ls
bin boot dev etc home lib lib64 media mnt opt proc root run sbin srv sys tmp usr var

You can see we've run the pwd to show our current directory and can see we're in the / root directory. We've also done a directory listing of the root directory which shows us what looks like a typical Linux file system.

You can play around inside this container and when you're done you can use the exit command or enter Ctrl-D to finish.

root@af8bae53bdd3:/# exit

As with our previous container, once the Bash shell process has finished, the container is stopped.

A daemonized Hello world

Now a container that runs a command and then exits has some uses but it's not overly helpful. Let's create a container that runs as a daemon, like most of the applications we're probably going to run with Docker.

Again we can do this with the docker run command:

$ docker run -d ubuntu:14.04 /bin/sh -c "while true; do echo hello world; sleep 1; done"
1e5535038e285177d5214659a068137486f96ee5c2e85a4ac52dc83f2ebe4147

Wait, what? Where's our "hello world" output? Let's look at what we've run here. It should look pretty familiar. We ran docker run but this time we specified a flag: -d. The -d flag tells Docker to run the container and put it in the background, to daemonize it.

We also specified the same image: ubuntu:14.04.

Finally, we specified a command to run:

/bin/sh -c "while true; do echo hello world; sleep 1; done"

This is the (hello) world's silliest daemon: a shell script that echoes hello world forever.

So why aren't we seeing any hello world's? Instead Docker has returned a really long string:

1e5535038e285177d5214659a068137486f96ee5c2e85a4ac52dc83f2ebe4147

This really long string is called a container ID. It uniquely identifies a container so we can work with it.

Note: The container ID is a bit long and unwieldy. A bit later, we'll see a shorter ID and ways to name our containers to make working with them easier.

We can use this container ID to see what's happening with our hello world daemon.

Firstly let's make sure our container is running. We can do that with the docker ps command. The docker ps command queries the Docker daemon for information about all the containers it knows about.

$ docker ps
CONTAINER ID  IMAGE         COMMAND               CREATED        STATUS       PORTS NAMES
1e5535038e28  ubuntu:14.04  /bin/sh -c 'while tr  2 minutes ago  Up 1 minute        insane_babbage

Here we can see our daemonized container. The docker ps has returned some useful information about it, starting with a shorter variant of its container ID: 1e5535038e28.

We can also see the image we used to build it, ubuntu:14.04, the command it is running, its status and an automatically assigned name, insane_babbage.

Note: Docker automatically generates names for any containers started. We'll see how to specify your own names a bit later.

Okay, so we now know it's running. But is it doing what we asked it to do? To see this we're going to look inside the container using the docker logs command. Let's use the container name Docker assigned.

$ docker logs insane_babbage
hello world
hello world
hello world
. . .

The docker logs command looks inside the container and returns its standard output: in this case the output of our command hello world.

Awesome! Our daemon is working and we've just created our first Dockerized application!

Now we've established we can create our own containers let's tidy up after ourselves and stop our daemonized container. To do this we use the docker stop command.

$ docker stop insane_babbage
insane_babbage

The docker stop command tells Docker to politely stop the running container. If it succeeds it will return the name of the container it has just stopped.

Let's check it worked with the docker ps command.

$ docker ps
CONTAINER ID  IMAGE         COMMAND               CREATED        STATUS       PORTS NAMES

Excellent. Our container has been stopped.

Next steps

Now we've seen how simple it is to get started with Docker. Let's learn how to do some more advanced tasks.

Go to Working With Containers.