mirror of https://github.com/moby/moby.git synced 2022-11-09 12:21:53 -05:00

Charles Smith 6f0502b89b Merge pull request #26156 from mstanleyjones/24905_swarm_noun_usage

Sanitize uses of Swarm as a proper and improper noun (Fixes #24905)

2016-09-07 10:38:59 -07:00

15 KiB

Raw Blame History

Get started with multi-host networking

This article uses an example to explain the basics of creating a multi-host network. Docker Engine supports multi-host networking out-of-the-box through the overlay network driver. Unlike bridge networks, overlay networks require some pre-existing conditions before you can create one:

Docker Engine running in swarm mode

A cluster of hosts using a key value store

Overlay networking and swarm mode

Using docker engine running in swarm mode, you can create an overlay network on a manager node.

The swarm makes the overlay network available only to nodes in the swarm that require it for a service. When you create a service that uses an overlay network, the manager node automatically extends the overlay network to nodes that run service tasks.

To learn more about running Docker Engine in swarm mode, refer to the Swarm mode overview.

The example below shows how to create a network and use it for a service from a manager node in the swarm:

# Create an overlay network `my-multi-host-network`.
$ docker network create \
  --driver overlay \
  --subnet 10.0.9.0/24 \
  my-multi-host-network

400g6bwzd68jizzdx5pgyoe95

# Create an nginx service and extend the my-multi-host-network to nodes where
# the service's tasks run.
$ docker service create --replicas 2 --network my-multi-host-network --name my-web nginx

716thylsndqma81j6kkkb5aus

Overlay networks for a swarm are not available to unmanaged containers. For more information refer to Docker swarm mode overlay network security model.

Overlay networking with an external key-value store

To use an Docker engine with an external key-value store, you need the following:

Access to the key-value store. Docker supports Consul, Etcd, and ZooKeeper (Distributed store) key-value stores.
A cluster of hosts with connectivity to the key-value store.
A properly configured Engine daemon on each host in the cluster.
Hosts within the cluster must have unique hostnames because the key-value store uses the hostnames to identify cluster members.

Though Docker Machine and Docker Swarm are not mandatory to experience Docker multi-host networking with a key-value store, this example uses them to illustrate how they are integrated. You'll use Machine to create both the key-value store server and the host cluster. This example creates a swarm cluster.

Note: Docker Engine running in swarm mode is not compatible with networking with an external key-value store.

Prerequisites

Before you begin, make sure you have a system on your network with the latest version of Docker Engine and Docker Machine installed. The example also relies on VirtualBox. If you installed on a Mac or Windows with Docker Toolbox, you have all of these installed already.

If you have not already done so, make sure you upgrade Docker Engine and Docker Machine to the latest versions.

Set up a key-value store

An overlay network requires a key-value store. The key-value store holds information about the network state which includes discovery, networks, endpoints, IP addresses, and more. Docker supports Consul, Etcd, and ZooKeeper key-value stores. This example uses Consul.

Log into a system prepared with the prerequisite Docker Engine, Docker Machine, and VirtualBox software.
Provision a VirtualBox machine called mh-keystore.
```
 $ docker-machine create -d virtualbox mh-keystore
```
When you provision a new machine, the process adds Docker Engine to the host. This means rather than installing Consul manually, you can create an instance using the consul image from Docker Hub. You'll do this in the next step.
Set your local environment to the mh-keystore machine.
```
 $  eval "$(docker-machine env mh-keystore)"
```
Start a progrium/consul container running on the mh-keystore machine.
```
 $  docker run -d \
 	-p "8500:8500" \
 	-h "consul" \
 	progrium/consul -server -bootstrap
```
The client starts a progrium/consul image running in the mh-keystore machine. The server is called consul and is listening on port 8500.

Run the docker ps command to see the consul container.

 $ docker ps

 CONTAINER ID        IMAGE               COMMAND                  CREATED             STATUS              PORTS                                                                            NAMES
 4d51392253b3        progrium/consul     "/bin/start -server -"   25 minutes ago      Up 25 minutes       53/tcp, 53/udp, 8300-8302/tcp, 0.0.0.0:8500->8500/tcp, 8400/tcp, 8301-8302/udp   admiring_panini

Keep your terminal open and move onto the next step.

Create a Swarm cluster

In this step, you use docker-machine to provision the hosts for your network. At this point, you won't actually create the network. You'll create several machines in VirtualBox. One of the machines will act as the swarm master; you'll create that first. As you create each host, you'll pass the Engine on that machine options that are needed by the overlay network driver.

Create a swarm master.
```
 $ docker-machine create \
 -d virtualbox \
 --swarm --swarm-master \
 --swarm-discovery="consul://$(docker-machine ip mh-keystore):8500" \
 --engine-opt="cluster-store=consul://$(docker-machine ip mh-keystore):8500" \
 --engine-opt="cluster-advertise=eth1:2376" \
 mhs-demo0
```
At creation time, you supply the Engine daemon with the --cluster-store option. This option tells the Engine the location of the key-value store for the overlay network. The bash expansion $(docker-machine ip mh-keystore) resolves to the IP address of the Consul server you created in "STEP 1". The --cluster-advertise option advertises the machine on the network.

Create another host and add it to the swarm cluster.

 $ docker-machine create -d virtualbox \
 	--swarm \
 	--swarm-discovery="consul://$(docker-machine ip mh-keystore):8500" \
 	--engine-opt="cluster-store=consul://$(docker-machine ip mh-keystore):8500" \
 	--engine-opt="cluster-advertise=eth1:2376" \
   mhs-demo1

List your machines to confirm they are all up and running.

 $ docker-machine ls

 NAME         ACTIVE   DRIVER       STATE     URL                         SWARM
 default      -        virtualbox   Running   tcp://192.168.99.100:2376
 mh-keystore  *        virtualbox   Running   tcp://192.168.99.103:2376
 mhs-demo0    -        virtualbox   Running   tcp://192.168.99.104:2376   mhs-demo0 (master)
 mhs-demo1    -        virtualbox   Running   tcp://192.168.99.105:2376   mhs-demo0

At this point you have a set of hosts running on your network. You are ready to create a multi-host network for containers using these hosts.

Leave your terminal open and go onto the next step.

Create the overlay Network

To create an overlay network

Set your docker environment to the swarm master.
```
 $ eval $(docker-machine env --swarm mhs-demo0)
```
Using the --swarm flag with docker-machine restricts the docker commands to swarm information alone.

Use the docker info command to view the swarm.

 $ docker info

 Containers: 3
 Images: 2
 Role: primary
 Strategy: spread
 Filters: affinity, health, constraint, port, dependency
 Nodes: 2
 mhs-demo0: 192.168.99.104:2376
 └ Containers: 2
 └ Reserved CPUs: 0 / 1
 └ Reserved Memory: 0 B / 1.021 GiB
 └ Labels: executiondriver=native-0.2, kernelversion=4.1.10-boot2docker, operatingsystem=Boot2Docker 1.9.0 (TCL 6.4); master : 4187d2c - Wed Oct 14 14:00:28 UTC 2015, provider=virtualbox, storagedriver=aufs
 mhs-demo1: 192.168.99.105:2376
 └ Containers: 1
 └ Reserved CPUs: 0 / 1
 └ Reserved Memory: 0 B / 1.021 GiB
 └ Labels: executiondriver=native-0.2, kernelversion=4.1.10-boot2docker, operatingsystem=Boot2Docker 1.9.0 (TCL 6.4); master : 4187d2c - Wed Oct 14 14:00:28 UTC 2015, provider=virtualbox, storagedriver=aufs
 CPUs: 2
 Total Memory: 2.043 GiB
 Name: 30438ece0915

From this information, you can see that you are running three containers and two images on the Master.

Create your overlay network.
```
 $ docker network create --driver overlay --subnet=10.0.9.0/24 my-net
```
You only need to create the network on a single host in the cluster. In this case, you used the swarm master but you could easily have run it on any host in the cluster.

Note

: It is highly recommended to use the --subnet option when creating a network. If the --subnet is not specified, the docker daemon automatically chooses and assigns a subnet for the network and it could overlap with another subnet in your infrastructure that is not managed by docker. Such overlaps can cause connectivity issues or failures when containers are connected to that network.

Check that the network is running:

 $ docker network ls

 NETWORK ID          NAME                DRIVER
 412c2496d0eb        mhs-demo1/host      host
 dd51763e6dd2        mhs-demo0/bridge    bridge
 6b07d0be843f        my-net              overlay
 b4234109bd9b        mhs-demo0/none      null
 1aeead6dd890        mhs-demo0/host      host
 d0bb78cbe7bd        mhs-demo1/bridge    bridge
 1c0eb8f69ebb        mhs-demo1/none      null

As you are in the swarm master environment, you see all the networks on all the swarm agents: the default networks on each engine and the single overlay network. Notice that each NETWORK ID is unique.

Switch to each swarm agent in turn and list the networks.

 $ eval $(docker-machine env mhs-demo0)

 $ docker network ls

 NETWORK ID          NAME                DRIVER
 6b07d0be843f        my-net              overlay
 dd51763e6dd2        bridge              bridge
 b4234109bd9b        none                null
 1aeead6dd890        host                host

 $ eval $(docker-machine env mhs-demo1)

 $ docker network ls

 NETWORK ID          NAME                DRIVER
 d0bb78cbe7bd        bridge              bridge
 1c0eb8f69ebb        none                null
 412c2496d0eb        host                host
 6b07d0be843f        my-net              overlay

Both agents report they have the my-net network with the 6b07d0be843f ID. You now have a multi-host container network running!

Run an application on your Network

Once your network is created, you can start a container on any of the hosts and it automatically is part of the network.

Point your environment to the swarm master.

 $ eval $(docker-machine env --swarm mhs-demo0)

Start an Nginx web server on the mhs-demo0 instance.

 $ docker run -itd --name=web --network=my-net --env="constraint:node==mhs-demo0" nginx

Run a BusyBox instance on the mhs-demo1 instance and get the contents of the Nginx server's home page.

 $ docker run -it --rm --network=my-net --env="constraint:node==mhs-demo1" busybox wget -O- http://web

 Unable to find image 'busybox:latest' locally
 latest: Pulling from library/busybox
 ab2b8a86ca6c: Pull complete
 2c5ac3f849df: Pull complete
 Digest: sha256:5551dbdfc48d66734d0f01cafee0952cb6e8eeecd1e2492240bf2fd9640c2279
 Status: Downloaded newer image for busybox:latest
 Connecting to web (10.0.0.2:80)
 <!DOCTYPE html>
 <html>
 <head>
 <title>Welcome to nginx!</title>
 <style>
 body {
 		width: 35em;
 		margin: 0 auto;
 		font-family: Tahoma, Verdana, Arial, sans-serif;
 }
 </style>
 </head>
 <body>
 <h1>Welcome to nginx!</h1>
 <p>If you see this page, the nginx web server is successfully installed and
 working. Further configuration is required.</p>

 <p>For online documentation and support please refer to
 <a href="http://nginx.org/">nginx.org</a>.<br/>
 Commercial support is available at
 <a href="http://nginx.com/">nginx.com</a>.</p>

 <p><em>Thank you for using nginx.</em></p>
 </body>
 </html>
 -                    100% |*******************************|   612   0:00:00 ETA

Check external connectivity

As you've seen, Docker's built-in overlay network driver provides out-of-the-box connectivity between the containers on multiple hosts within the same network. Additionally, containers connected to the multi-host network are automatically connected to the docker_gwbridge network. This network allows the containers to have external connectivity outside of their cluster.

Change your environment to the swarm agent.
```
 $ eval $(docker-machine env mhs-demo1)
```

View the docker_gwbridge network, by listing the networks.

 $ docker network ls

 NETWORK ID          NAME                DRIVER
 6b07d0be843f        my-net              overlay
 dd51763e6dd2        bridge              bridge
 b4234109bd9b        none                null
 1aeead6dd890        host                host
 e1dbd5dff8be        docker_gwbridge     bridge

Repeat steps 1 and 2 on the swarm master.

 $ eval $(docker-machine env mhs-demo0)

 $ docker network ls

 NETWORK ID          NAME                DRIVER
 6b07d0be843f        my-net              overlay
 d0bb78cbe7bd        bridge              bridge
 1c0eb8f69ebb        none                null
 412c2496d0eb        host                host
 97102a22e8d2        docker_gwbridge     bridge

Check the Nginx container's network interfaces.

 $ docker exec web ip addr

 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
 inet 127.0.0.1/8 scope host lo
     valid_lft forever preferred_lft forever
 inet6 ::1/128 scope host
     valid_lft forever preferred_lft forever
 22: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UP group default
 link/ether 02:42:0a:00:09:03 brd ff:ff:ff:ff:ff:ff
 inet 10.0.9.3/24 scope global eth0
     valid_lft forever preferred_lft forever
 inet6 fe80::42:aff:fe00:903/64 scope link
     valid_lft forever preferred_lft forever
 24: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
 link/ether 02:42:ac:12:00:02 brd ff:ff:ff:ff:ff:ff
 inet 172.18.0.2/16 scope global eth1
     valid_lft forever preferred_lft forever
 inet6 fe80::42:acff:fe12:2/64 scope link
     valid_lft forever preferred_lft forever

The eth0 interface represents the container interface that is connected to the my-net overlay network. While the eth1 interface represents the container interface that is connected to the docker_gwbridge network.

Extra Credit with Docker Compose

Please refer to the Networking feature introduced in [Compose V2 format] (https://docs.docker.com/compose/networking/) and execute the multi-host networking scenario in the swarm cluster used above.

15 KiB Raw Blame History