moby--moby/docs/sources/articles/security.md

page_title: Docker Security
page_description: Review of the Docker Daemon attack surface
page_keywords: Docker, Docker documentation, security

# Docker Security

> *Adapted from* [Containers & Docker: How Secure are
> They?](http://blog.docker.com/2013/08/containers-docker-how-secure-are-they/)

There are three major areas to consider when reviewing Docker security:

 - the intrinsic security of containers, as implemented by kernel
   namespaces and cgroups;
 - the attack surface of the Docker daemon itself;
 - the "hardening" security features of the kernel and how they
   interact with containers.

## Kernel Namespaces

Docker containers are very similar to LXC containers, and they come with
the similar security features. When you start a container with `docker
run`, behind the scenes Docker creates a set of namespaces and control
groups for the container.

**Namespaces provide the first and most straightforward form of
isolation**: processes running within a container cannot see, and even
less affect, processes running in another container, or in the host
system.

**Each container also gets its own network stack**, meaning that a
container doesn't get a privileged access to the sockets or interfaces
of another container. Of course, if the host system is setup
accordingly, containers can interact with each other through their
respective network interfaces — just like they can interact with
external hosts. When you specify public ports for your containers or use
[*links*](/userguide/dockerlinks/#working-with-links-names)
then IP traffic is allowed between containers. They can ping each other,
send/receive UDP packets, and establish TCP connections, but that can be
restricted if necessary. From a network architecture point of view, all
containers on a given Docker host are sitting on bridge interfaces. This
means that they are just like physical machines connected through a
common Ethernet switch; no more, no less.

How mature is the code providing kernel namespaces and private
networking? Kernel namespaces were introduced [between kernel version
2.6.15 and
2.6.26](http://lxc.sourceforge.net/index.php/about/kernel-namespaces/).
This means that since July 2008 (date of the 2.6.26 release, now 5 years
ago), namespace code has been exercised and scrutinized on a large
number of production systems. And there is more: the design and
inspiration for the namespaces code are even older. Namespaces are
actually an effort to reimplement the features of [OpenVZ](
http://en.wikipedia.org/wiki/OpenVZ) in such a way that they could be
merged within the mainstream kernel. And OpenVZ was initially released
in 2005, so both the design and the implementation are pretty mature.

## Control Groups

Control Groups are the other key component of Linux Containers. They
implement resource accounting and limiting. They provide a lot of very
useful metrics, but they also help to ensure that each container gets
its fair share of memory, CPU, disk I/O; and, more importantly, that a
single container cannot bring the system down by exhausting one of those
resources.

So while they do not play a role in preventing one container from
accessing or affecting the data and processes of another container, they
are essential to fend off some denial-of-service attacks. They are
particularly important on multi-tenant platforms, like public and
private PaaS, to guarantee a consistent uptime (and performance) even
when some applications start to misbehave.

Control Groups have been around for a while as well: the code was
started in 2006, and initially merged in kernel 2.6.24.

## Docker Daemon Attack Surface

Running containers (and applications) with Docker implies running the
Docker daemon. This daemon currently requires `root` privileges, and you
should therefore be aware of some important details.

First of all, **only trusted users should be allowed to control your
Docker daemon**. This is a direct consequence of some powerful Docker
features. Specifically, Docker allows you to share a directory between
the Docker host and a guest container; and it allows you to do so
without limiting the access rights of the container. This means that you
can start a container where the `/host` directory will be the `/` directory
on your host; and the container will be able to alter your host filesystem
without any restriction. This sounds crazy? Well, you have to know that
**all virtualization systems allowing filesystem resource sharing behave the
same way**. Nothing prevents you from sharing your root filesystem (or
even your root block device) with a virtual machine.

This has a strong security implication: for example, if you instrument Docker
from a web server to provision containers through an API, you should be
even more careful than usual with parameter checking, to make sure that
a malicious user cannot pass crafted parameters causing Docker to create
arbitrary containers.

For this reason, the REST API endpoint (used by the Docker CLI to
communicate with the Docker daemon) changed in Docker 0.5.2, and now
uses a UNIX socket instead of a TCP socket bound on 127.0.0.1 (the
latter being prone to cross-site-scripting attacks if you happen to run
Docker directly on your local machine, outside of a VM). You can then
use traditional UNIX permission checks to limit access to the control
socket.

You can also expose the REST API over HTTP if you explicitly decide so.
However, if you do that, being aware of the above mentioned security
implication, you should ensure that it will be reachable only from a
trusted network or VPN; or protected with e.g., `stunnel` and client SSL
certificates. You can also secure them with [HTTPS and
certificates](/articles/https/).

Recent improvements in Linux namespaces will soon allow to run
full-featured containers without root privileges, thanks to the new user
namespace. This is covered in detail [here](
http://s3hh.wordpress.com/2013/07/19/creating-and-using-containers-without-privilege/).
Moreover, this will solve the problem caused by sharing filesystems
between host and guest, since the user namespace allows users within
containers (including the root user) to be mapped to other users in the
host system.

The end goal for Docker is therefore to implement two additional
security improvements:

 - map the root user of a container to a non-root user of the Docker
   host, to mitigate the effects of a container-to-host privilege
   escalation;
 - allow the Docker daemon to run without root privileges, and delegate
   operations requiring those privileges to well-audited sub-processes,
   each with its own (very limited) scope: virtual network setup,
   filesystem management, etc.

Finally, if you run Docker on a server, it is recommended to run
exclusively Docker in the server, and move all other services within
containers controlled by Docker. Of course, it is fine to keep your
favorite admin tools (probably at least an SSH server), as well as
existing monitoring/supervision processes (e.g., NRPE, collectd, etc).

## Linux Kernel Capabilities

By default, Docker starts containers with a very restricted set of
capabilities. What does that mean?

Capabilities turn the binary "root/non-root" dichotomy into a
fine-grained access control system. Processes (like web servers) that
just need to bind on a port below 1024 do not have to run as root: they
can just be granted the `net_bind_service` capability instead. And there
are many other capabilities, for almost all the specific areas where root
privileges are usually needed.

This means a lot for container security; let's see why!

Your average server (bare metal or virtual machine) needs to run a bunch
of processes as root. Those typically include SSH, cron, syslogd;
hardware management tools (e.g., load modules), network configuration
tools (e.g., to handle DHCP, WPA, or VPNs), and much more. A container is
very different, because almost all of those tasks are handled by the
infrastructure around the container:

 - SSH access will typically be managed by a single server running in
   the Docker host;
 - `cron`, when necessary, should run as a user
   process, dedicated and tailored for the app that needs its
   scheduling service, rather than as a platform-wide facility;
 - log management will also typically be handed to Docker, or by
   third-party services like Loggly or Splunk;
 - hardware management is irrelevant, meaning that you never need to
   run `udevd` or equivalent daemons within
   containers;
 - network management happens outside of the containers, enforcing
   separation of concerns as much as possible, meaning that a container
   should never need to perform `ifconfig`,
   `route`, or ip commands (except when a container
   is specifically engineered to behave like a router or firewall, of
   course).

This means that in most cases, containers will not need "real" root
privileges *at all*. And therefore, containers can run with a reduced
capability set; meaning that "root" within a container has much less
privileges than the real "root". For instance, it is possible to:

 - deny all "mount" operations;
 - deny access to raw sockets (to prevent packet spoofing);
 - deny access to some filesystem operations, like creating new device
   nodes, changing the owner of files, or altering attributes (including
   the immutable flag);
 - deny module loading;
 - and many others.

This means that even if an intruder manages to escalate to root within a
container, it will be much harder to do serious damage, or to escalate
to the host.

This won't affect regular web apps; but malicious users will find that
the arsenal at their disposal has shrunk considerably! By default Docker
drops all capabilities except [those
needed](https://github.com/docker/docker/blob/master/daemon/execdriver/native/template/default_template.go),
a whitelist instead of a blacklist approach. You can see a full list of
available capabilities in [Linux
manpages](http://man7.org/linux/man-pages/man7/capabilities.7.html).

Of course, you can always enable extra capabilities if you really need
them (for instance, if you want to use a FUSE-based filesystem), but by
default, Docker containers use only a
[whitelist](https://github.com/docker/docker/blob/master/daemon/execdriver/native/template/default_template.go)
of kernel capabilities by default.

## Other Kernel Security Features

Capabilities are just one of the many security features provided by
modern Linux kernels. It is also possible to leverage existing,
well-known systems like TOMOYO, AppArmor, SELinux, GRSEC, etc. with
Docker.

While Docker currently only enables capabilities, it doesn't interfere
with the other systems. This means that there are many different ways to
harden a Docker host. Here are a few examples.

 - You can run a kernel with GRSEC and PAX. This will add many safety
   checks, both at compile-time and run-time; it will also defeat many
   exploits, thanks to techniques like address randomization. It doesn't
   require Docker-specific configuration, since those security features
   apply system-wide, independently of containers.
 - If your distribution comes with security model templates for
   Docker containers, you can use them out of the box. For instance, we
   ship a template that works with AppArmor and Red Hat comes with SELinux
   policies for Docker. These templates provide an extra safety net (even
   though it overlaps greatly with capabilities).
 - You can define your own policies using your favorite access control
   mechanism.

Just like there are many third-party tools to augment Docker containers
with e.g., special network topologies or shared filesystems, you can
expect to see tools to harden existing Docker containers without
affecting Docker's core.

## Conclusions

Docker containers are, by default, quite secure; especially if you take
care of running your processes inside the containers as non-privileged
users (i.e. non-`root`).

You can add an extra layer of safety by enabling Apparmor, SELinux,
GRSEC, or your favorite hardening solution.

Last but not least, if you see interesting security features in other
containerization systems, you will be able to implement them as well
with Docker, since everything is provided by the kernel anyway.

For more context and especially for comparisons with VMs and other
container systems, please also see the [original blog post](
http://blog.docker.com/2013/08/containers-docker-how-secure-are-they/).