moby--moby/docs/articles/basics.md

Get started with containers

This guide assumes you have a working installation of Docker. To verify Docker is installed, use the following command:

# Check that you have a working install
$ docker info

If you get docker: command not found or something like /var/lib/docker/repositories: permission denied you may have an incomplete Docker installation or insufficient privileges to access Docker on your machine. With the default installation of Docker docker commands need to be run by a user that is in the docker group or by the root user.

Depending on your Docker system configuration, you may be required to preface each docker command with sudo. One way to avoid having to use sudo with the docker commands is to create a Unix group called docker and add users that will be entering docker commands to the 'docker' group.

For more information about installing Docker or sudo configuration, refer to the installation instructions for your operating system.

Download a pre-built image

# Download an ubuntu image
$ docker pull ubuntu

This will find the ubuntu image by name on Docker Hub and download it from Docker Hub to a local image cache.

Note

: When the image is successfully downloaded, you see a 12 character hash 539c0211cd76: Download complete which is the short form of the image ID. These short image IDs are the first 12 characters of the full image ID - which can be found using docker inspect or docker images --no-trunc=true.

Running an interactive shell

To run an interactive shell in the Ubuntu image:

$ docker run -i -t ubuntu /bin/bash       

The -i flag starts an interactive container. The -t flag creates a pseudo-TTY that attaches stdin and stdout.

To detach the tty without exiting the shell, use the escape sequence Ctrl-p + Ctrl-q. The container will continue to exist in a stopped state once exited. To list all containers, stopped and running, use the docker ps -a command.

Bind Docker to another host/port or a Unix socket

Warning

: Changing the default docker daemon binding to a TCP port or Unix docker user group will increase your security risks by allowing non-root users to gain root access on the host. Make sure you control access to docker. If you are binding to a TCP port, anyone with access to that port has full Docker access; so it is not advisable on an open network.

With -H it is possible to make the Docker daemon to listen on a specific IP and port. By default, it will listen on unix:///var/run/docker.sock to allow only local connections by the root user. You could set it to 0.0.0.0:2375 or a specific host IP to give access to everybody, but that is not recommended because then it is trivial for someone to gain root access to the host where the daemon is running.

Similarly, the Docker client can use -H to connect to a custom port.

-H accepts host and port assignment in the following format:

tcp://[host][:port][path] or unix://path

For example:

• tcp://host:2375 -> TCP connection on host:2375
• tcp://host:2375/path -> TCP connection on host:2375 and prepend path to all requests
• unix://path/to/socket -> Unix socket located at path/to/socket

-H, when empty, will default to the same value as when no -H was passed in.

-H also accepts short form for TCP bindings:

host[:port] or :port

Run Docker in daemon mode:

$ sudo <path to>/docker daemon -H 0.0.0.0:5555 &

Download an ubuntu image:

$ docker -H :5555 pull ubuntu

You can use multiple -H, for example, if you want to listen on both TCP and a Unix socket

# Run docker in daemon mode
$ sudo <path to>/docker daemon -H tcp://127.0.0.1:2375 -H unix:///var/run/docker.sock &
# Download an ubuntu image, use default Unix socket
$ docker pull ubuntu
# OR use the TCP port
$ docker -H tcp://127.0.0.1:2375 pull ubuntu

Starting a long-running worker process

# Start a very useful long-running process
$ JOB=$(docker run -d ubuntu /bin/sh -c "while true; do echo Hello world; sleep 1; done")

# Collect the output of the job so far
$ docker logs $JOB

# Kill the job
$ docker kill $JOB

Listing containers

$ docker ps # Lists only running containers
$ docker ps -a # Lists all containers

Controlling containers

# Start a new container
$ JOB=$(docker run -d ubuntu /bin/sh -c "while true; do echo Hello world; sleep 1; done")

# Stop the container
$ docker stop $JOB

# Start the container
$ docker start $JOB

# Restart the container
$ docker restart $JOB

# SIGKILL a container
$ docker kill $JOB

# Remove a container
$ docker stop $JOB # Container must be stopped to remove it
$ docker rm $JOB

Bind a service on a TCP port

# Bind port 4444 of this container, and tell netcat to listen on it
$ JOB=$(docker run -d -p 4444 ubuntu:12.10 /bin/nc -l 4444)

# Which public port is NATed to my container?
$ PORT=$(docker port $JOB 4444 | awk -F: '{ print $2 }')

# Connect to the public port
$ echo hello world | nc 127.0.0.1 $PORT

# Verify that the network connection worked
$ echo "Daemon received: $(docker logs $JOB)"

Committing (saving) a container state

Save your containers state to an image, so the state can be re-used.

When you commit your container, Docker only stores the diff (difference) between the source image and the current state of the container's image. To list images you already have, use the docker images command.

# Commit your container to a new named image
$ docker commit <container> <some_name>

# List your images
$ docker images

You now have an image state from which you can create new instances.

Read more about Share Images via Repositories or continue to the complete Command Line