54 KiB
Active Record Validations and Callbacks
This guide teaches you how to hook into the life cycle of your Active Record objects. You will learn how to validate the state of objects before they go into the database, and how to perform custom operations at certain points in the object life cycle.
After reading this guide and trying out the presented concepts, we hope that you'll be able to:
- Understand the life cycle of Active Record objects
- Use the built-in Active Record validation helpers
- Create your own custom validation methods
- Work with the error messages generated by the validation process
- Create callback methods that respond to events in the object life cycle
- Create special classes that encapsulate common behavior for your callbacks
- Create Observers that respond to life cycle events outside of the original class
The Object Life Cycle
During the normal operation of a Rails application, objects may be created, updated, and destroyed. Active Record provides hooks into this object life cycle so that you can control your application and its data.
Validations allow you to ensure that only valid data is stored in your database. Callbacks and observers allow you to trigger logic before or after an alteration of an object's state.
Validations Overview
Before you dive into the detail of validations in Rails, you should understand a bit about how validations fit into the big picture.
Why Use Validations?
Validations are used to ensure that only valid data is saved into your database. For example, it may be important to your application to ensure that every user provides a valid email address and mailing address.
There are several ways to validate data before it is saved into your database, including native database constraints, client-side validations, controller-level validations, and model-level validations:
- Database constraints and/or stored procedures make the validation mechanisms database-dependent and can make testing and maintenance more difficult. However, if your database is used by other applications, it may be a good idea to use some constraints at the database level. Additionally, database-level validations can safely handle some things (such as uniqueness in heavily-used tables) that can be difficult to implement otherwise.
- Client-side validations can be useful, but are generally unreliable if used alone. If they are implemented using JavaScript, they may be bypassed if JavaScript is turned off in the user's browser. However, if combined with other techniques, client-side validation can be a convenient way to provide users with immediate feedback as they use your site.
- Controller-level validations can be tempting to use, but often become unwieldy and difficult to test and maintain. Whenever possible, it's a good idea to keep your controllers skinny, as it will make your application a pleasure to work with in the long run.
- Model-level validations are the best way to ensure that only valid data is saved into your database. They are database agnostic, cannot be bypassed by end users, and are convenient to test and maintain. Rails makes them easy to use, provides built-in helpers for common needs, and allows you to create your own validation methods as well.
When Does Validation Happen?
There are two kinds of Active Record objects: those that correspond to a row inside your database and those that do not. When you create a fresh object, for example using the new
method, that object does not belong to the database yet. Once you call save
upon that object it will be saved into the appropriate database table. Active Record uses the new_record?
instance method to determine whether an object is already in the database or not. Consider the following simple Active Record class:
class Person < ActiveRecord::Base
end
We can see how it works by looking at some rails console
output:
$ rails console
>> p = Person.new(name: "John Doe")
=> #<Person id: nil, name: "John Doe", created_at: nil, updated_at: nil>
>> p.new_record?
=> true
>> p.save
=> true
>> p.new_record?
=> false
TIP: All lines starting with a dollar sign $
are intended to be run on the command line.
Creating and saving a new record will send an SQL INSERT
operation to the database. Updating an existing record will send an SQL UPDATE
operation instead. Validations are typically run before these commands are sent to the database. If any validations fail, the object will be marked as invalid and Active Record will not perform the INSERT
or UPDATE
operation. This helps to avoid storing an invalid object in the database. You can choose to have specific validations run when an object is created, saved, or updated.
CAUTION: There are many ways to change the state of an object in the database. Some methods will trigger validations, but some will not. This means that it's possible to save an object in the database in an invalid state if you aren't careful.
The following methods trigger validations, and will save the object to the database only if the object is valid:
create
create!
save
save!
update
update_attributes
update_attributes!
The bang versions (e.g. save!
) raise an exception if the record is invalid. The non-bang versions don't: save
and update_attributes
return false
, create
and update
just return the objects.
Skipping Validations
The following methods skip validations, and will save the object to the database regardless of its validity. They should be used with caution.
decrement!
decrement_counter
increment!
increment_counter
toggle!
touch
update_all
update_attribute
update_column
update_columns
update_counters
Note that save
also has the ability to skip validations if passed validate: false
as argument. This technique should be used with caution.
save(validate: false)
valid?
and invalid?
To verify whether or not an object is valid, Rails uses the valid?
method. You can also use this method on your own. valid?
triggers your validations and returns true if no errors were found in the object, and false otherwise.
class Person < ActiveRecord::Base
validates :name, presence: true
end
Person.create(name: "John Doe").valid? # => true
Person.create(name: nil).valid? # => false
After Active Record has performed validations, any errors found can be accessed through the errors
instance method, which returns a collection of errors. By definition, an object is valid if this collection is empty after running validations.
Note that an object instantiated with new
will not report errors even if it's technically invalid, because validations are not run when using new
.
class Person < ActiveRecord::Base
validates :name, presence: true
end
>> p = Person.new
#=> #<Person id: nil, name: nil>
>> p.errors
#=> {}
>> p.valid?
#=> false
>> p.errors
#=> {name:["can't be blank"]}
>> p = Person.create
#=> #<Person id: nil, name: nil>
>> p.errors
#=> {name:["can't be blank"]}
>> p.save
#=> false
>> p.save!
#=> ActiveRecord::RecordInvalid: Validation failed: Name can't be blank
>> Person.create!
#=> ActiveRecord::RecordInvalid: Validation failed: Name can't be blank
invalid?
is simply the inverse of valid?
. It triggers your validations, returning true if any errors were found in the object, and false otherwise.
errors[]
To verify whether or not a particular attribute of an object is valid, you can use errors[:attribute]
. It returns an array of all the errors for :attribute
. If there are no errors on the specified attribute, an empty array is returned.
This method is only useful after validations have been run, because it only inspects the errors collection and does not trigger validations itself. It's different from the ActiveRecord::Base#invalid?
method explained above because it doesn't verify the validity of the object as a whole. It only checks to see whether there are errors found on an individual attribute of the object.
class Person < ActiveRecord::Base
validates :name, presence: true
end
>> Person.new.errors[:name].any? # => false
>> Person.create.errors[:name].any? # => true
We'll cover validation errors in greater depth in the Working with Validation Errors section. For now, let's turn to the built-in validation helpers that Rails provides by default.
Validation Helpers
Active Record offers many pre-defined validation helpers that you can use directly inside your class definitions. These helpers provide common validation rules. Every time a validation fails, an error message is added to the object's errors
collection, and this message is associated with the attribute being validated.
Each helper accepts an arbitrary number of attribute names, so with a single line of code you can add the same kind of validation to several attributes.
All of them accept the :on
and :message
options, which define when the validation should be run and what message should be added to the errors
collection if it fails, respectively. The :on
option takes one of the values :save
(the default), :create
or :update
. There is a default error message for each one of the validation helpers. These messages are used when the :message
option isn't specified. Let's take a look at each one of the available helpers.
acceptance
Validates that a checkbox on the user interface was checked when a form was submitted. This is typically used when the user needs to agree to your application's terms of service, confirm reading some text, or any similar concept. This validation is very specific to web applications and this 'acceptance' does not need to be recorded anywhere in your database (if you don't have a field for it, the helper will just create a virtual attribute).
class Person < ActiveRecord::Base
validates :terms_of_service, acceptance: true
end
The default error message for this helper is "must be accepted".
It can receive an :accept
option, which determines the value that will be considered acceptance. It defaults to "1" and can be easily changed.
class Person < ActiveRecord::Base
validates :terms_of_service, acceptance: { accept: 'yes' }
end
validates_associated
You should use this helper when your model has associations with other models and they also need to be validated. When you try to save your object, valid?
will be called upon each one of the associated objects.
class Library < ActiveRecord::Base
has_many :books
validates_associated :books
end
This validation will work with all of the association types.
CAUTION: Don't use validates_associated
on both ends of your associations. They would call each other in an infinite loop.
The default error message for validates_associated
is "is invalid". Note that each associated object will contain its own errors
collection; errors do not bubble up to the calling model.
confirmation
You should use this helper when you have two text fields that should receive exactly the same content. For example, you may want to confirm an email address or a password. This validation creates a virtual attribute whose name is the name of the field that has to be confirmed with "_confirmation" appended.
class Person < ActiveRecord::Base
validates :email, confirmation: true
end
In your view template you could use something like
<%= text_field :person, :email %>
<%= text_field :person, :email_confirmation %>
This check is performed only if email_confirmation
is not nil
. To require confirmation, make sure to add a presence check for the confirmation attribute (we'll take a look at presence
later on this guide):
class Person < ActiveRecord::Base
validates :email, confirmation: true
validates :email_confirmation, presence: true
end
The default error message for this helper is "doesn't match confirmation".
exclusion
This helper validates that the attributes' values are not included in a given set. In fact, this set can be any enumerable object.
class Account < ActiveRecord::Base
validates :subdomain, exclusion: { in: %w(www us ca jp),
message: "Subdomain %{value} is reserved." }
end
The exclusion
helper has an option :in
that receives the set of values that will not be accepted for the validated attributes. The :in
option has an alias called :within
that you can use for the same purpose, if you'd like to. This example uses the :message
option to show how you can include the attribute's value.
The default error message is "is reserved".
format
This helper validates the attributes' values by testing whether they match a given regular expression, which is specified using the :with
option.
class Product < ActiveRecord::Base
validates :legacy_code, format: { with: /\A[a-zA-Z]+\z/,
message: "Only letters allowed" }
end
The default error message is "is invalid".
inclusion
This helper validates that the attributes' values are included in a given set. In fact, this set can be any enumerable object.
class Coffee < ActiveRecord::Base
validates :size, inclusion: { in: %w(small medium large),
message: "%{value} is not a valid size" }
end
The inclusion
helper has an option :in
that receives the set of values that will be accepted. The :in
option has an alias called :within
that you can use for the same purpose, if you'd like to. The previous example uses the :message
option to show how you can include the attribute's value.
The default error message for this helper is "is not included in the list".
length
This helper validates the length of the attributes' values. It provides a variety of options, so you can specify length constraints in different ways:
class Person < ActiveRecord::Base
validates :name, length: { minimum: 2 }
validates :bio, length: { maximum: 500 }
validates :password, length: { in: 6..20 }
validates :registration_number, length: { is: 6 }
end
The possible length constraint options are:
:minimum
- The attribute cannot have less than the specified length.:maximum
- The attribute cannot have more than the specified length.:in
(or:within
) - The attribute length must be included in a given interval. The value for this option must be a range.:is
- The attribute length must be equal to the given value.
The default error messages depend on the type of length validation being performed. You can personalize these messages using the :wrong_length
, :too_long
, and :too_short
options and %{count}
as a placeholder for the number corresponding to the length constraint being used. You can still use the :message
option to specify an error message.
class Person < ActiveRecord::Base
validates :bio, length: { maximum: 1000,
too_long: "%{count} characters is the maximum allowed" }
end
This helper counts characters by default, but you can split the value in a different way using the :tokenizer
option:
class Essay < ActiveRecord::Base
validates :content, length: {
minimum: 300,
maximum: 400,
tokenizer: lambda { |str| str.scan(/\w+/) },
too_short: "must have at least %{count} words",
too_long: "must have at most %{count} words"
}
end
Note that the default error messages are plural (e.g., "is too short (minimum is %{count} characters)"). For this reason, when :minimum
is 1 you should provide a personalized message or use validates_presence_of
instead. When :in
or :within
have a lower limit of 1, you should either provide a personalized message or call presence
prior to length
.
The size
helper is an alias for length
.
numericality
This helper validates that your attributes have only numeric values. By default, it will match an optional sign followed by an integral or floating point number. To specify that only integral numbers are allowed set :only_integer
to true.
If you set :only_integer
to true
, then it will use the
/\A[+-]?\d+\Z/
regular expression to validate the attribute's value. Otherwise, it will try to convert the value to a number using Float
.
WARNING. Note that the regular expression above allows a trailing newline character.
class Player < ActiveRecord::Base
validates :points, numericality: true
validates :games_played, numericality: { only_integer: true }
end
Besides :only_integer
, this helper also accepts the following options to add constraints to acceptable values:
:greater_than
- Specifies the value must be greater than the supplied value. The default error message for this option is "must be greater than %{count}".:greater_than_or_equal_to
- Specifies the value must be greater than or equal to the supplied value. The default error message for this option is "must be greater than or equal to %{count}".:equal_to
- Specifies the value must be equal to the supplied value. The default error message for this option is "must be equal to %{count}".:less_than
- Specifies the value must be less than the supplied value. The default error message for this option is "must be less than %{count}".:less_than_or_equal_to
- Specifies the value must be less than or equal the supplied value. The default error message for this option is "must be less than or equal to %{count}".:odd
- Specifies the value must be an odd number if set to true. The default error message for this option is "must be odd".:even
- Specifies the value must be an even number if set to true. The default error message for this option is "must be even".
The default error message is "is not a number".
presence
This helper validates that the specified attributes are not empty. It uses the blank?
method to check if the value is either nil
or a blank string, that is, a string that is either empty or consists of whitespace.
class Person < ActiveRecord::Base
validates :name, :login, :email, presence: true
end
If you want to be sure that an association is present, you'll need to test the associated object itself, and not whether the foreign key used to map the association is present:
class LineItem < ActiveRecord::Base
belongs_to :order
validates :order, presence: true
end
You should also be sure to have a proper :inverse_of
as well:
class Order < ActiveRecord::Base
has_many :line_items, inverse_of: :order
end
If you validate the presence of an object associated via a has_one
or has_many
relationship, it will check that the object is neither blank?
nor marked_for_destruction?
.
Since false.blank?
is true, if you want to validate the presence of a boolean field you should use validates :field_name, inclusion: { in: [true, false] }
.
The default error message is "can't be empty".
uniqueness
This helper validates that the attribute's value is unique right before the object gets saved. It does not create a uniqueness constraint in the database, so it may happen that two different database connections create two records with the same value for a column that you intend to be unique. To avoid that, you must create a unique index in your database.
class Account < ActiveRecord::Base
validates :email, uniqueness: true
end
The validation happens by performing an SQL query into the model's table, searching for an existing record with the same value in that attribute.
There is a :scope
option that you can use to specify other attributes that are used to limit the uniqueness check:
class Holiday < ActiveRecord::Base
validates :name, uniqueness: { scope: :year,
message: "should happen once per year" }
end
There is also a :case_sensitive
option that you can use to define whether the uniqueness constraint will be case sensitive or not. This option defaults to true.
class Person < ActiveRecord::Base
validates :name, uniqueness: { case_sensitive: false }
end
WARNING. Note that some databases are configured to perform case-insensitive searches anyway.
The default error message is "has already been taken".
validates_with
This helper passes the record to a separate class for validation.
class Person < ActiveRecord::Base
validates_with GoodnessValidator
end
class GoodnessValidator < ActiveModel::Validator
def validate(record)
if record.first_name == "Evil"
record.errors[:base] << "This person is evil"
end
end
end
NOTE: Errors added to record.errors[:base]
relate to the state of the record as a whole, and not to a specific attribute.
The validates_with
helper takes a class, or a list of classes to use for validation. There is no default error message for validates_with
. You must manually add errors to the record's errors collection in the validator class.
To implement the validate method, you must have a record
parameter defined, which is the record to be validated.
Like all other validations, validates_with
takes the :if
, :unless
and :on
options. If you pass any other options, it will send those options to the validator class as options
:
class Person < ActiveRecord::Base
validates_with GoodnessValidator, fields: [:first_name, :last_name]
end
class GoodnessValidator < ActiveModel::Validator
def validate(record)
if options[:fields].any?{|field| record.send(field) == "Evil" }
record.errors[:base] << "This person is evil"
end
end
end
validates_each
This helper validates attributes against a block. It doesn't have a predefined validation function. You should create one using a block, and every attribute passed to validates_each
will be tested against it. In the following example, we don't want names and surnames to begin with lower case.
class Person < ActiveRecord::Base
validates_each :name, :surname do |record, attr, value|
record.errors.add(attr, 'must start with upper case') if value =~ /\A[a-z]/
end
end
The block receives the record, the attribute's name and the attribute's value. You can do anything you like to check for valid data within the block. If your validation fails, you should add an error message to the model, therefore making it invalid.
Common Validation Options
These are common validation options:
:allow_nil
The :allow_nil
option skips the validation when the value being validated is nil
.
class Coffee < ActiveRecord::Base
validates :size, inclusion: { in: %w(small medium large),
message: "%{value} is not a valid size" }, allow_nil: true
end
TIP: :allow_nil
is ignored by the presence validator.
:allow_blank
The :allow_blank
option is similar to the :allow_nil
option. This option will let validation pass if the attribute's value is blank?
, like nil
or an empty string for example.
class Topic < ActiveRecord::Base
validates :title, length: { is: 5 }, allow_blank: true
end
Topic.create("title" => "").valid? # => true
Topic.create("title" => nil).valid? # => true
TIP: :allow_blank
is ignored by the presence validator.
:message
As you've already seen, the :message
option lets you specify the message that will be added to the errors
collection when validation fails. When this option is not used, Active Record will use the respective default error message for each validation helper.
:on
The :on
option lets you specify when the validation should happen. The default behavior for all the built-in validation helpers is to be run on save (both when you're creating a new record and when you're updating it). If you want to change it, you can use on: :create
to run the validation only when a new record is created or on: :update
to run the validation only when a record is updated.
class Person < ActiveRecord::Base
# it will be possible to update email with a duplicated value
validates :email, uniqueness: true, on: :create
# it will be possible to create the record with a non-numerical age
validates :age, numericality: true, on: :update
# the default (validates on both create and update)
validates :name, presence: true, on: :save
end
Strict Validations
You can also specify validations to be strict and raise ActiveModel::StrictValidationFailed
when the object is invalid.
class Person < ActiveRecord::Base
validates :name, presence: { strict: true }
end
Person.new.valid? #=> ActiveModel::StrictValidationFailed: Name can't be blank
There is also an ability to pass custom exception to :strict
option
class Person < ActiveRecord::Base
validates :token, presence: true, uniqueness: true, strict: TokenGenerationException
end
Person.new.valid? #=> TokenGenerationException: Token can't be blank
Conditional Validation
Sometimes it will make sense to validate an object just when a given predicate is satisfied. You can do that by using the :if
and :unless
options, which can take a symbol, a string, a Proc
or an Array
. You may use the :if
option when you want to specify when the validation should happen. If you want to specify when the validation should not happen, then you may use the :unless
option.
Using a Symbol with :if
and :unless
You can associate the :if
and :unless
options with a symbol corresponding to the name of a method that will get called right before validation happens. This is the most commonly used option.
class Order < ActiveRecord::Base
validates :card_number, presence: true, if: :paid_with_card?
def paid_with_card?
payment_type == "card"
end
end
Using a String with :if
and :unless
You can also use a string that will be evaluated using eval
and needs to contain valid Ruby code. You should use this option only when the string represents a really short condition.
class Person < ActiveRecord::Base
validates :surname, presence: true, if: "name.nil?"
end
Using a Proc with :if
and :unless
Finally, it's possible to associate :if
and :unless
with a Proc
object which will be called. Using a Proc
object gives you the ability to write an inline condition instead of a separate method. This option is best suited for one-liners.
class Account < ActiveRecord::Base
validates :password, confirmation: true,
unless: Proc.new { |a| a.password.blank? }
end
Grouping conditional validations
Sometimes it is useful to have multiple validations use one condition, it can be easily achieved using with_options
.
class User < ActiveRecord::Base
with_options if: :is_admin? do |admin|
admin.validates :password, length: { minimum: 10 }
admin.validates :email, presence: true
end
end
All validations inside of with_options
block will have automatically passed the condition if: :is_admin?
Combining validation conditions
On the other hand, when multiple conditions define whether or not a validation should happen, an Array
can be used. Moreover, you can apply both :if
and :unless
to the same validation.
class Computer < ActiveRecord::Base
validates :mouse, presence: true,
if: ["market.retail?", :desktop?]
unless: Proc.new { |c| c.trackpad.present? }
end
The validation only runs when all the :if
conditions and none of the :unless
conditions are evaluated to true
.
Performing Custom Validations
When the built-in validation helpers are not enough for your needs, you can write your own validators or validation methods as you prefer.
Custom Validators
Custom validators are classes that extend ActiveModel::Validator
. These classes must implement a validate
method which takes a record as an argument and performs the validation on it. The custom validator is called using the validates_with
method.
class MyValidator < ActiveModel::Validator
def validate(record)
unless record.name.starts_with? 'X'
record.errors[:name] << 'Need a name starting with X please!'
end
end
end
class Person
include ActiveModel::Validations
validates_with MyValidator
end
The easiest way to add custom validators for validating individual attributes is with the convenient ActiveModel::EachValidator
. In this case, the custom validator class must implement a validate_each
method which takes three arguments: record, attribute and value which correspond to the instance, the attribute to be validated and the value of the attribute in the passed instance.
class EmailValidator < ActiveModel::EachValidator
def validate_each(record, attribute, value)
unless value =~ /\A([^@\s]+)@((?:[-a-z0-9]+\.)+[a-z]{2,})\z/i
record.errors[attribute] << (options[:message] || "is not an email")
end
end
end
class Person < ActiveRecord::Base
validates :email, presence: true, email: true
end
As shown in the example, you can also combine standard validations with your own custom validators.
Custom Methods
You can also create methods that verify the state of your models and add messages to the errors
collection when they are invalid. You must then register these methods by using the validate
class method, passing in the symbols for the validation methods' names.
You can pass more than one symbol for each class method and the respective validations will be run in the same order as they were registered.
class Invoice < ActiveRecord::Base
validate :expiration_date_cannot_be_in_the_past,
:discount_cannot_be_greater_than_total_value
def expiration_date_cannot_be_in_the_past
if expiration_date.present? && expiration_date < Date.today
errors.add(:expiration_date, "can't be in the past")
end
end
def discount_cannot_be_greater_than_total_value
if discount > total_value
errors.add(:discount, "can't be greater than total value")
end
end
end
By default such validations will run every time you call valid?
. It is also possible to control when to run these custom validations by giving an :on
option to the validate
method, with either: :create
or :update
.
class Invoice < ActiveRecord::Base
validate :active_customer, on: :create
def active_customer
errors.add(:customer_id, "is not active") unless customer.active?
end
end
You can even create your own validation helpers and reuse them in several different models. For example, an application that manages surveys may find it useful to express that a certain field corresponds to a set of choices:
ActiveRecord::Base.class_eval do
def self.validates_as_choice(attr_name, n, options={})
validates attr_name, inclusion: { { in: 1..n }.merge!(options) }
end
end
Simply reopen ActiveRecord::Base
and define a class method like that. You'd typically put this code somewhere in config/initializers
. You can use this helper like this:
class Movie < ActiveRecord::Base
validates_as_choice :rating, 5
end
Working with Validation Errors
In addition to the valid?
and invalid?
methods covered earlier, Rails provides a number of methods for working with the errors
collection and inquiring about the validity of objects.
The following is a list of the most commonly used methods. Please refer to the ActiveModel::Errors
documentation for a list of all the available methods.
errors
Returns an instance of the class ActiveModel::Errors
containing all errors. Each key is the attribute name and the value is an array of strings with all errors.
class Person < ActiveRecord::Base
validates :name, presence: true, length: { minimum: 3 }
end
person = Person.new
person.valid? # => false
person.errors
# => {:name=>["can't be blank", "is too short (minimum is 3 characters)"]}
person = Person.new(name: "John Doe")
person.valid? # => true
person.errors # => []
errors[]
errors[]
is used when you want to check the error messages for a specific attribute. It returns an array of strings with all error messages for the given attribute, each string with one error message. If there are no errors related to the attribute, it returns an empty array.
class Person < ActiveRecord::Base
validates :name, presence: true, length: { minimum: 3 }
end
person = Person.new(name: "John Doe")
person.valid? # => true
person.errors[:name] # => []
person = Person.new(name: "JD")
person.valid? # => false
person.errors[:name] # => ["is too short (minimum is 3 characters)"]
person = Person.new
person.valid? # => false
person.errors[:name]
# => ["can't be blank", "is too short (minimum is 3 characters)"]
errors.add
The add
method lets you manually add messages that are related to particular attributes. You can use the errors.full_messages
or errors.to_a
methods to view the messages in the form they might be displayed to a user. Those particular messages get the attribute name prepended (and capitalized). add
receives the name of the attribute you want to add the message to, and the message itself.
class Person < ActiveRecord::Base
def a_method_used_for_validation_purposes
errors.add(:name, "cannot contain the characters !@#%*()_-+=")
end
end
person = Person.create(name: "!@#")
person.errors[:name]
# => ["cannot contain the characters !@#%*()_-+="]
person.errors.full_messages
# => ["Name cannot contain the characters !@#%*()_-+="]
Another way to do this is using []=
setter
class Person < ActiveRecord::Base
def a_method_used_for_validation_purposes
errors[:name] = "cannot contain the characters !@#%*()_-+="
end
end
person = Person.create(name: "!@#")
person.errors[:name]
# => ["cannot contain the characters !@#%*()_-+="]
person.errors.to_a
# => ["Name cannot contain the characters !@#%*()_-+="]
errors[:base]
You can add error messages that are related to the object's state as a whole, instead of being related to a specific attribute. You can use this method when you want to say that the object is invalid, no matter the values of its attributes. Since errors[:base]
is an array, you can simply add a string to it and it will be used as an error message.
class Person < ActiveRecord::Base
def a_method_used_for_validation_purposes
errors[:base] << "This person is invalid because ..."
end
end
errors.clear
The clear
method is used when you intentionally want to clear all the messages in the errors
collection. Of course, calling errors.clear
upon an invalid object won't actually make it valid: the errors
collection will now be empty, but the next time you call valid?
or any method that tries to save this object to the database, the validations will run again. If any of the validations fail, the errors
collection will be filled again.
class Person < ActiveRecord::Base
validates :name, presence: true, length: { minimum: 3 }
end
person = Person.new
person.valid? # => false
person.errors[:name]
# => ["can't be blank", "is too short (minimum is 3 characters)"]
person.errors.clear
person.errors.empty? # => true
p.save # => false
p.errors[:name]
# => ["can't be blank", "is too short (minimum is 3 characters)"]
errors.size
The size
method returns the total number of error messages for the object.
class Person < ActiveRecord::Base
validates :name, presence: true, length: { minimum: 3 }
end
person = Person.new
person.valid? # => false
person.errors.size # => 2
person = Person.new(name: "Andrea", email: "andrea@example.com")
person.valid? # => true
person.errors.size # => 0
Displaying Validation Errors in the View
DynamicForm provides helpers to display the error messages of your models in your view templates.
You can install it as a gem by adding this line to your Gemfile:
gem "dynamic_form"
Now you will have access to the two helper methods error_messages
and error_messages_for
in your view templates.
error_messages
and error_messages_for
When creating a form with the form_for
helper, you can use the error_messages
method on the form builder to render all failed validation messages for the current model instance.
class Product < ActiveRecord::Base
validates :description, :value, presence: true
validates :value, numericality: true, allow_nil: true
end
<%= form_for(@product) do |f| %>
<%= f.error_messages %>
<p>
<%= f.label :description %><br />
<%= f.text_field :description %>
</p>
<p>
<%= f.label :value %><br />
<%= f.text_field :value %>
</p>
<p>
<%= f.submit "Create" %>
</p>
<% end %>
If you submit the form with empty fields, the result will be similar to the one shown below:
NOTE: The appearance of the generated HTML will be different from the one shown, unless you have used scaffolding. See Customizing the Error Messages CSS.
You can also use the error_messages_for
helper to display the error messages of a model assigned to a view template. It is very similar to the previous example and will achieve exactly the same result.
<%= error_messages_for :product %>
The displayed text for each error message will always be formed by the capitalized name of the attribute that holds the error, followed by the error message itself.
Both the form.error_messages
and the error_messages_for
helpers accept options that let you customize the div
element that holds the messages, change the header text, change the message below the header, and specify the tag used for the header element. For example,
<%= f.error_messages header_message: "Invalid product!",
message: "You'll need to fix the following fields:",
header_tag: :h3 %>
results in:
If you pass nil
in any of these options, the corresponding section of the div
will be discarded.
Customizing the Error Messages CSS
The selectors used to customize the style of error messages are:
.field_with_errors
- Style for the form fields and labels with errors.#errorExplanation
- Style for thediv
element with the error messages.#errorExplanation h2
- Style for the header of thediv
element.#errorExplanation p
- Style for the paragraph holding the message that appears right below the header of thediv
element.#errorExplanation ul li
- Style for the list items with individual error messages.
If scaffolding was used, file app/assets/stylesheets/scaffolds.css.scss
will have been generated automatically. This file defines the red-based styles you saw in the examples above.
The name of the class and the id can be changed with the :class
and :id
options, accepted by both helpers.
Customizing the Error Messages HTML
By default, form fields with errors are displayed enclosed by a div
element with the field_with_errors
CSS class. However, it's possible to override that.
The way form fields with errors are treated is defined by ActionView::Base.field_error_proc
. This is a Proc
that receives two parameters:
- A string with the HTML tag
- An instance of
ActionView::Helpers::InstanceTag
.
Below is a simple example where we change the Rails behavior to always display the error messages in front of each of the form fields in error. The error messages will be enclosed by a span
element with a validation-error
CSS class. There will be no div
element enclosing the input
element, so we get rid of that red border around the text field. You can use the validation-error
CSS class to style it anyway you want.
ActionView::Base.field_error_proc = Proc.new do |html_tag, instance|
if html_tag =~ /\<label/
html_tag
else
errors = Array(instance.error_message).join(',')
%(#{html_tag}<span class="validation-error"> #{errors}</span>).html_safe
end
end
The result looks like the following:
Callbacks Overview
Callbacks are methods that get called at certain moments of an object's life cycle. With callbacks it is possible to write code that will run whenever an Active Record object is created, saved, updated, deleted, validated, or loaded from the database.
Callback Registration
In order to use the available callbacks, you need to register them. You can implement the callbacks as ordinary methods and use a macro-style class method to register them as callbacks:
class User < ActiveRecord::Base
validates :login, :email, presence: true
before_validation :ensure_login_has_a_value
protected
def ensure_login_has_a_value
if login.nil?
self.login = email unless email.blank?
end
end
end
The macro-style class methods can also receive a block. Consider using this style if the code inside your block is so short that it fits in a single line:
class User < ActiveRecord::Base
validates :login, :email, presence: true
before_create do |user|
user.name = user.login.capitalize if user.name.blank?
end
end
Callbacks can also be registered to only fire on certain lifecycle events:
class User < ActiveRecord::Base
before_validation :normalize_name, on: :create
# :on takes an array as well
after_validation :set_location, on: [ :create, :update ]
protected
def normalize_name
self.name = self.name.downcase.titleize
end
def set_location
self.location = LocationService.query(self)
end
end
It is considered good practice to declare callback methods as protected or private. If left public, they can be called from outside of the model and violate the principle of object encapsulation.
Available Callbacks
Here is a list with all the available Active Record callbacks, listed in the same order in which they will get called during the respective operations:
Creating an Object
before_validation
after_validation
before_save
around_save
before_create
around_create
after_create
after_save
Updating an Object
before_validation
after_validation
before_save
around_save
before_update
around_update
after_update
after_save
Destroying an Object
before_destroy
around_destroy
after_destroy
WARNING. after_save
runs both on create and update, but always after the more specific callbacks after_create
and after_update
, no matter the order in which the macro calls were executed.
after_initialize
and after_find
The after_initialize
callback will be called whenever an Active Record object is instantiated, either by directly using new
or when a record is loaded from the database. It can be useful to avoid the need to directly override your Active Record initialize
method.
The after_find
callback will be called whenever Active Record loads a record from the database. after_find
is called before after_initialize
if both are defined.
The after_initialize
and after_find
callbacks have no before_*
counterparts, but they can be registered just like the other Active Record callbacks.
class User < ActiveRecord::Base
after_initialize do |user|
puts "You have initialized an object!"
end
after_find do |user|
puts "You have found an object!"
end
end
>> User.new
You have initialized an object!
=> #<User id: nil>
>> User.first
You have found an object!
You have initialized an object!
=> #<User id: 1>
Running Callbacks
The following methods trigger callbacks:
create
create!
decrement!
destroy
destroy_all
increment!
save
save!
save(validate: false)
toggle!
update
update_attribute
update_attributes
update_attributes!
valid?
Additionally, the after_find
callback is triggered by the following finder methods:
all
first
find
find_all_by_*
find_by_*
find_by_*!
find_by_sql
last
The after_initialize
callback is triggered every time a new object of the class is initialized.
NOTE: The find_all_by_*
, find_by_*
and find_by_*!
methods are dynamic finders generated automatically for every attribute. Learn more about them at the Dynamic finders section
Skipping Callbacks
Just as with validations, it is also possible to skip callbacks. These methods should be used with caution, however, because important business rules and application logic may be kept in callbacks. Bypassing them without understanding the potential implications may lead to invalid data.
decrement
decrement_counter
delete
delete_all
increment
increment_counter
toggle
touch
update_column
update_columns
update_all
update_counters
Halting Execution
As you start registering new callbacks for your models, they will be queued for execution. This queue will include all your model's validations, the registered callbacks, and the database operation to be executed.
The whole callback chain is wrapped in a transaction. If any before callback method returns exactly false
or raises an exception, the execution chain gets halted and a ROLLBACK is issued; after callbacks can only accomplish that by raising an exception.
WARNING. Raising an arbitrary exception may break code that expects save
and its friends not to fail like that. The ActiveRecord::Rollback
exception is thought precisely to tell Active Record a rollback is going on. That one is internally captured but not reraised.
Relational Callbacks
Callbacks work through model relationships, and can even be defined by them. Suppose an example where a user has many posts. A user's posts should be destroyed if the user is destroyed. Let's add an after_destroy
callback to the User
model by way of its relationship to the Post
model:
class User < ActiveRecord::Base
has_many :posts, dependent: :destroy
end
class Post < ActiveRecord::Base
after_destroy :log_destroy_action
def log_destroy_action
puts 'Post destroyed'
end
end
>> user = User.first
=> #<User id: 1>
>> user.posts.create!
=> #<Post id: 1, user_id: 1>
>> user.destroy
Post destroyed
=> #<User id: 1>
Conditional Callbacks
As with validations, we can also make the calling of a callback method conditional on the satisfaction of a given predicate. We can do this using the :if
and :unless
options, which can take a symbol, a string, a Proc
or an Array
. You may use the :if
option when you want to specify under which conditions the callback should be called. If you want to specify the conditions under which the callback should not be called, then you may use the :unless
option.
Using :if
and :unless
with a Symbol
You can associate the :if
and :unless
options with a symbol corresponding to the name of a predicate method that will get called right before the callback. When using the :if
option, the callback won't be executed if the predicate method returns false; when using the :unless
option, the callback won't be executed if the predicate method returns true. This is the most common option. Using this form of registration it is also possible to register several different predicates that should be called to check if the callback should be executed.
class Order < ActiveRecord::Base
before_save :normalize_card_number, if: :paid_with_card?
end
Using :if
and :unless
with a String
You can also use a string that will be evaluated using eval
and hence needs to contain valid Ruby code. You should use this option only when the string represents a really short condition:
class Order < ActiveRecord::Base
before_save :normalize_card_number, if: "paid_with_card?"
end
Using :if
and :unless
with a Proc
Finally, it is possible to associate :if
and :unless
with a Proc
object. This option is best suited when writing short validation methods, usually one-liners:
class Order < ActiveRecord::Base
before_save :normalize_card_number,
if: Proc.new { |order| order.paid_with_card? }
end
Multiple Conditions for Callbacks
When writing conditional callbacks, it is possible to mix both :if
and :unless
in the same callback declaration:
class Comment < ActiveRecord::Base
after_create :send_email_to_author, if: :author_wants_emails?,
unless: Proc.new { |comment| comment.post.ignore_comments? }
end
Callback Classes
Sometimes the callback methods that you'll write will be useful enough to be reused by other models. Active Record makes it possible to create classes that encapsulate the callback methods, so it becomes very easy to reuse them.
Here's an example where we create a class with an after_destroy
callback for a PictureFile
model:
class PictureFileCallbacks
def after_destroy(picture_file)
if File.exists?(picture_file.filepath)
File.delete(picture_file.filepath)
end
end
end
When declared inside a class, as above, the callback methods will receive the model object as a parameter. We can now use the callback class in the model:
class PictureFile < ActiveRecord::Base
after_destroy PictureFileCallbacks.new
end
Note that we needed to instantiate a new PictureFileCallbacks
object, since we declared our callback as an instance method. This is particularly useful if the callbacks make use of the state of the instantiated object. Often, however, it will make more sense to declare the callbacks as class methods:
class PictureFileCallbacks
def self.after_destroy(picture_file)
if File.exists?(picture_file.filepath)
File.delete(picture_file.filepath)
end
end
end
If the callback method is declared this way, it won't be necessary to instantiate a PictureFileCallbacks
object.
class PictureFile < ActiveRecord::Base
after_destroy PictureFileCallbacks
end
You can declare as many callbacks as you want inside your callback classes.
Observers
Observers are similar to callbacks, but with important differences. Whereas callbacks can pollute a model with code that isn't directly related to its purpose, observers allow you to add the same functionality without changing the code of the model. For example, it could be argued that a User
model should not include code to send registration confirmation emails. Whenever you use callbacks with code that isn't directly related to your model, you may want to consider creating an observer instead.
Creating Observers
For example, imagine a User
model where we want to send an email every time a new user is created. Because sending emails is not directly related to our model's purpose, we should create an observer to contain the code implementing this functionality.
$ rails generate observer User
generates app/models/user_observer.rb
containing the observer class UserObserver
:
class UserObserver < ActiveRecord::Observer
end
You may now add methods to be called at the desired occasions:
class UserObserver < ActiveRecord::Observer
def after_create(model)
# code to send confirmation email...
end
end
As with callback classes, the observer's methods receive the observed model as a parameter.
Registering Observers
Observers are conventionally placed inside of your app/models
directory and registered in your application's config/application.rb
file. For example, the UserObserver
above would be saved as app/models/user_observer.rb
and registered in config/application.rb
this way:
# Activate observers that should always be running.
config.active_record.observers = :user_observer
As usual, settings in config/environments
take precedence over those in config/application.rb
. So, if you prefer that an observer doesn't run in all environments, you can simply register it in a specific environment instead.
Sharing Observers
By default, Rails will simply strip "Observer" from an observer's name to find the model it should observe. However, observers can also be used to add behavior to more than one model, and thus it is possible to explicitly specify the models that our observer should observe:
class MailerObserver < ActiveRecord::Observer
observe :registration, :user
def after_create(model)
# code to send confirmation email...
end
end
In this example, the after_create
method will be called whenever a Registration
or User
is created. Note that this new MailerObserver
would also need to be registered in config/application.rb
in order to take effect:
# Activate observers that should always be running.
config.active_record.observers = :mailer_observer
Transaction Callbacks
There are two additional callbacks that are triggered by the completion of a database transaction: after_commit
and after_rollback
. These callbacks are very similar to the after_save
callback except that they don't execute until after database changes have either been committed or rolled back. They are most useful when your active record models need to interact with external systems which are not part of the database transaction.
Consider, for example, the previous example where the PictureFile
model needs to delete a file after the corresponding record is destroyed. If anything raises an exception after the after_destroy
callback is called and the transaction rolls back, the file will have been deleted and the model will be left in an inconsistent state. For example, suppose that picture_file_2
in the code below is not valid and the save!
method raises an error.
PictureFile.transaction do
picture_file_1.destroy
picture_file_2.save!
end
By using the after_commit
callback we can account for this case.
class PictureFile < ActiveRecord::Base
attr_accessor :delete_file
after_destroy do |picture_file|
picture_file.delete_file = picture_file.filepath
end
after_commit do |picture_file|
if picture_file.delete_file && File.exist?(picture_file.delete_file)
File.delete(picture_file.delete_file)
picture_file.delete_file = nil
end
end
end
The after_commit
and after_rollback
callbacks are guaranteed to be called for all models created, updated, or destroyed within a transaction block. If any exceptions are raised within one of these callbacks, they will be ignored so that they don't interfere with the other callbacks. As such, if your callback code could raise an exception, you'll need to rescue it and handle it appropriately within the callback.