kotovalexarian-likes-gitlab/gitlab-org--gitlab-foss
1
0
Fork 0
Code Releases Activity
gitlab-org--gitlab-foss/doc/administration/reference_architectures/2k_users.md

1130 lines
53 KiB
Markdown
Raw Blame History

---
stage: Systems
group: Distribution
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/product/ux/technical-writing/#assignments
---
# Reference architecture: up to 2,000 users **(FREE SELF)**
This page describes GitLab reference architecture for up to 2,000 users.
For a full list of reference architectures, see
[Available reference architectures](index.md#available-reference-architectures).
> - **Supported users (approximate):** 2,000
> - **High Availability:** No. For a highly-available environment, you can
> follow a modified [3K reference architecture](3k_users.md#supported-modifications-for-lower-user-counts-ha).
> - **Estimated Costs:** [See cost table](index.md#cost-to-run)
> - **Cloud Native Hybrid:** [Yes](#cloud-native-hybrid-reference-architecture-with-helm-charts-alternative)
> - **Validation and test results:** The Quality Engineering team does [regular smoke and performance tests](index.md#validation-and-test-results) to ensure the reference architectures remain compliant
> - **Test requests per second (RPS) rates:** API: 40 RPS, Web: 4 RPS, Git (Pull): 4 RPS, Git (Push): 1 RPS
> - **[Latest Results](https://gitlab.com/gitlab-org/quality/performance/-/wikis/Benchmarks/Latest/2k)**
> - **Unsure which Reference Architecture to use?** [Go to this guide for more info](index.md#deciding-which-architecture-to-use).
| Service | Nodes | Configuration | GCP | AWS | Azure |
|----------------------------|-------|------------------------|-----------------|--------------|----------|
| Load balancer<sup>3</sup> | 1 | 2 vCPU, 1.8 GB memory | `n1-highcpu-2` | `c5.large` | `F2s v2` |
| PostgreSQL<sup>1</sup> | 1 | 2 vCPU, 7.5 GB memory | `n1-standard-2` | `m5.large` | `D2s v3` |
| Redis<sup>2</sup> | 1 | 1 vCPU, 3.75 GB memory | `n1-standard-1` | `m5.large` | `D2s v3` |
| Gitaly | 1 | 4 vCPU, 15 GB memory | `n1-standard-4` | `m5.xlarge` | `D4s v3` |
| GitLab Rails | 2 | 8 vCPU, 7.2 GB memory | `n1-highcpu-8` | `c5.2xlarge` | `F8s v2` |
| Monitoring node | 1 | 2 vCPU, 1.8 GB memory | `n1-highcpu-2` | `c5.large` | `F2s v2` |
| Object storage<sup>4</sup> | - | - | - | - | - |
| NFS server (non-Gitaly) | 1 | 4 vCPU, 3.6 GB memory | `n1-highcpu-4` | `c5.xlarge` | `F4s v2` |
<!-- markdownlint-disable MD029 -->
1. Can be optionally run on reputable third-party external PaaS PostgreSQL solutions. See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
- [Google Cloud SQL](https://cloud.google.com/sql/docs/postgres/high-availability#normal) and [Amazon RDS](https://aws.amazon.com/rds/) are known to work.
- [Google AlloyDB](https://cloud.google.com/alloydb) and [Amazon RDS Multi-AZ DB clusters](https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/multi-az-db-clusters-concepts.html) have not been tested and are not recommended. Both solutions are specifically not expected to work with GitLab Geo.
- [Amazon Aurora](https://aws.amazon.com/rds/aurora/) is **incompatible** with load balancing enabled by default in [14.4.0](../../update/index.md#1440), and [Azure Database for PostgreSQL](https://azure.microsoft.com/en-gb/services/postgresql/) is **not recommended** due to [performance issues](https://gitlab.com/gitlab-org/quality/reference-architectures/-/issues/61).
- Consul is primarily used for Omnibus PostgreSQL high availability so can be ignored when using a PostgreSQL PaaS setup. However, Consul is also used optionally by Prometheus for Omnibus auto host discovery.
2. Can be optionally run on reputable third-party external PaaS Redis solutions. See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
- [Google Memorystore](https://cloud.google.com/memorystore) and [Amazon ElastiCache](https://aws.amazon.com/elasticache/) are known to work.
3. Can be optionally run on reputable third-party load balancing services (LB PaaS). See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
- [Google Cloud Load Balancing](https://cloud.google.com/load-balancing) and [Amazon Elastic Load Balancing](https://aws.amazon.com/elasticloadbalancing/) are known to work.
4. Should be run on reputable Cloud Provider or Self Managed solutions. More information can be found in the [Configure the object storage](#configure-the-object-storage) section.
<!-- markdownlint-enable MD029 -->
NOTE:
For all PaaS solutions that involve configuring instances, it is strongly recommended to implement a minimum of three nodes in three different availability zones to align with resilient cloud architecture practices.
```plantuml
@startuml 2k
skinparam linetype ortho
card "**External Load Balancer**" as elb #6a9be7
collections "**GitLab Rails** x3" as gitlab #32CD32
card "**Prometheus + Grafana**" as monitor #7FFFD4
card "**Gitaly**" as gitaly #FF8C00
card "**PostgreSQL**" as postgres #4EA7FF
card "**Redis**" as redis #FF6347
cloud "**Object Storage**" as object_storage #white
elb -[#6a9be7]-> gitlab
elb -[#6a9be7]--> monitor
gitlab -[#32CD32]--> gitaly
gitlab -[#32CD32]--> postgres
gitlab -[#32CD32]-> object_storage
gitlab -[#32CD32]--> redis
monitor .[#7FFFD4]u-> gitlab
monitor .[#7FFFD4]-> gitaly
monitor .[#7FFFD4]-> postgres
monitor .[#7FFFD4,norank]--> redis
monitor .[#7FFFD4,norank]u--> elb
@enduml
```
## Requirements
Before starting, you should take note of the following requirements / guidance for this reference architecture.
### Supported CPUs
This reference architecture was built and tested on Google Cloud Platform (GCP) using the
[Intel Xeon E5 v3 (Haswell)](https://cloud.google.com/compute/docs/cpu-platforms)
CPU platform as a baseline ([Sysbench benchmark](https://gitlab.com/gitlab-org/quality/performance/-/wikis/Reference-Architectures/GCP-CPU-Benchmarks)).
Newer, similarly sized CPUs are supported and may have improved performance as a result. For Omnibus environments, ARM-based equivalents are also supported.
NOTE:
Any "burstable" instance types are not recommended due to inconsistent performance.
### Supported infrastructure
As a general guidance, GitLab should run on most infrastructure such as reputable Cloud Providers (AWS, GCP, Azure) and their services, or self managed (ESXi) that meet both the specs detailed above, as well as any requirements in this section. However, this does not constitute a guarantee for every potential permutation.
See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
## Setup components
To set up GitLab and its components to accommodate up to 2,000 users:
1. [Configure the external load balancing node](#configure-the-external-load-balancer)
to handle the load balancing of the GitLab application services nodes.
1. [Configure PostgreSQL](#configure-postgresql), the database for GitLab.
1. [Configure Redis](#configure-redis).
1. [Configure Gitaly](#configure-gitaly), which provides access to the Git
repositories.
1. [Configure the main GitLab Rails application](#configure-gitlab-rails)
to run Puma, Workhorse, GitLab Shell, and to serve all frontend
requests (which include UI, API, and Git over HTTP/SSH).
1. [Configure Prometheus](#configure-prometheus) to monitor your GitLab
environment.
1. [Configure the object storage](#configure-the-object-storage) used for
shared data objects.
1. [Configure NFS](#configure-nfs-optional) (optional, and not recommended)
to have shared disk storage service as an alternative to Gitaly or object
storage.
1. [Configure Advanced Search](#configure-advanced-search) (optional) for faster,
more advanced code search across your entire GitLab instance.
## Configure the external load balancer
In a multi-node GitLab configuration, you'll need a load balancer to route
traffic to the application servers. The specifics on which load balancer to use
or its exact configuration is beyond the scope of GitLab documentation. We assume
that if you're managing multi-node systems like GitLab, you already have a load
balancer of choice and that the routing methods used are distributing calls evenly
between all nodes. Some load balancer examples include HAProxy (open-source),
F5 Big-IP LTM, and Citrix Net Scaler. This documentation outline the ports and
protocols needed for use with GitLab.
This architecture has been tested and validated with [HAProxy](https://www.haproxy.org/)
as the load balancer. Although other load balancers with similar feature sets
could also be used, those load balancers have not been validated.
The next question is how you will handle SSL in your environment. There are
several different options:
- [The application node terminates SSL](#application-node-terminates-ssl).
- [The load balancer terminates SSL without backend SSL](#load-balancer-terminates-ssl-without-backend-ssl)
and communication is not secure between the load balancer and the application node.
- [The load balancer terminates SSL with backend SSL](#load-balancer-terminates-ssl-with-backend-ssl)
and communication is *secure* between the load balancer and the application node.
### Application node terminates SSL
Configure your load balancer to pass connections on port 443 as `TCP` instead
of `HTTP(S)`. This will pass the connection unaltered to the application node's
NGINX service, which has the SSL certificate and listens to port 443.
For details about managing SSL certificates and configuring NGINX, see the
[HTTPS documentation](https://docs.gitlab.com/omnibus/settings/ssl.html)
### Load balancer terminates SSL without backend SSL
Configure your load balancer to use the `HTTP(S)` protocol instead of `TCP`.
The load balancer will be responsible for both managing SSL certificates and
terminating SSL.
Due to communication between the load balancer and GitLab not being secure,
you'll need to complete some additional configuration. For details, see the
[proxied SSL documentation](https://docs.gitlab.com/omnibus/settings/ssl.html#configure-a-reverse-proxy-or-load-balancer-ssl-termination).
### Load balancer terminates SSL with backend SSL
Configure your load balancers (or single balancer, if you have only one) to use
the `HTTP(S)` protocol rather than `TCP`. The load balancers will be
responsible for the managing SSL certificates for end users.
Traffic will be secure between the load balancers and NGINX in this scenario,
and there's no need to add a configuration for proxied SSL. However, you'll
need to add a configuration to GitLab to configure SSL certificates. For
details about managing SSL certificates and configuring NGINX, see the
[HTTPS documentation](https://docs.gitlab.com/omnibus/settings/ssl.html).
### Readiness checks
Ensure the external load balancer only routes to working services with built
in monitoring endpoints. The [readiness checks](../../user/admin_area/monitoring/health_check.md)
all require [additional configuration](../monitoring/ip_allowlist.md)
on the nodes being checked, otherwise, the external load balancer will not be able to
connect.
### Ports
The basic load balancer ports you should use are described in the following
table:
| Port | Backend Port | Protocol |
| ------- | ------------ | ------------------------ |
| 80 | 80 | HTTP (*1*) |
| 443 | 443 | TCP or HTTPS (*1*) (*2*) |
| 22 | 22 | TCP |
- (*1*): [Web terminal](../../ci/environments/index.md#web-terminals-deprecated) support
requires your load balancer to correctly handle WebSocket connections.
When using HTTP or HTTPS proxying, your load balancer must be configured
to pass through the `Connection` and `Upgrade` hop-by-hop headers. For
details, see the [web terminal](../integration/terminal.md) integration guide.
- (*2*): When using the HTTPS protocol for port 443, you'll need to add an SSL
certificate to the load balancers. If you need to terminate SSL at the
GitLab application server, use the TCP protocol.
If you're using GitLab Pages with custom domain support you will need some
additional port configurations. GitLab Pages requires a separate virtual IP
address. Configure DNS to point the `pages_external_url` from
`/etc/gitlab/gitlab.rb` to the new virtual IP address. For more information,
see the [GitLab Pages documentation](../pages/index.md).
| Port | Backend Port | Protocol |
| ------- | ------------- | --------- |
| 80 | Varies (*1*) | HTTP |
| 443 | Varies (*1*) | TCP (*2*) |
- (*1*): The backend port for GitLab Pages depends on the
`gitlab_pages['external_http']` and `gitlab_pages['external_https']`
settings. For details, see the [GitLab Pages documentation](../pages/index.md).
- (*2*): Port 443 for GitLab Pages must use the TCP protocol. Users can
configure custom domains with custom SSL, which wouldn't be possible if SSL
was terminated at the load balancer.
#### Alternate SSH Port
Some organizations have policies against opening SSH port 22. In this case,
it may be helpful to configure an alternate SSH hostname that instead allows
users to use SSH over port 443. An alternate SSH hostname requires a new
virtual IP address compared to the previously described GitLab HTTP
configuration.
Configure DNS for an alternate SSH hostname, such as `altssh.gitlab.example.com`:
| LB Port | Backend Port | Protocol |
| ------- | ------------ | -------- |
| 443 | 22 | TCP |
<div align="right">
<a type="button" class="btn btn-default" href="#setup-components">
Back to setup components <i class="fa fa-angle-double-up" aria-hidden="true"></i>
</a>
</div>
## Configure PostgreSQL
In this section, you'll be guided through configuring an external PostgreSQL database
to be used with GitLab.
### Provide your own PostgreSQL instance
If you're hosting GitLab on a cloud provider, you can optionally use a
managed service for PostgreSQL.
A reputable provider or solution should be used for this. [Google Cloud SQL](https://cloud.google.com/sql/docs/postgres/high-availability#normal) and [Amazon RDS](https://aws.amazon.com/rds/) are known to work. However, Amazon Aurora is **incompatible** with load balancing enabled by default in [14.4.0](../../update/index.md#1440), and Azure Database for PostgreSQL is **not recommended** due to [performance issues](https://gitlab.com/gitlab-org/quality/reference-architectures/-/issues/61). See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
If you use a cloud-managed service, or provide your own PostgreSQL:
1. Set up PostgreSQL according to the
[database requirements document](../../install/requirements.md#database).
1. Create a `gitlab` username with a password of your choice. The `gitlab` user
needs privileges to create the `gitlabhq_production` database.
1. Configure the GitLab application servers with the appropriate details.
This step is covered in [Configuring the GitLab Rails application](#configure-gitlab-rails).
See [Configure GitLab using an external PostgreSQL service](../postgresql/external.md) for
further configuration steps.
### Standalone PostgreSQL using Omnibus GitLab
1. SSH in to the PostgreSQL server.
1. [Download and install](https://about.gitlab.com/install/) the Omnibus GitLab
package of your choice. Be sure to follow _only_ installation steps 1 and 2
on the page.
1. Generate a password hash for PostgreSQL. This assumes you will use the default
username of `gitlab` (recommended). The command will request a password
and confirmation. Use the value that is output by this command in the next
step as the value of `POSTGRESQL_PASSWORD_HASH`.
```shell
sudo gitlab-ctl pg-password-md5 gitlab
```
1. Edit `/etc/gitlab/gitlab.rb` and add the contents below, updating placeholder
values appropriately.
- `POSTGRESQL_PASSWORD_HASH` - The value output from the previous step
- `APPLICATION_SERVER_IP_BLOCKS` - A space delimited list of IP subnets or IP
addresses of the GitLab application servers that will connect to the
database. Example: `%w(123.123.123.123/32 123.123.123.234/32)`
```ruby
# Disable all components except PostgreSQL related ones
roles(['postgres_role'])
# Set the network addresses that the exporters used for monitoring will listen on
node_exporter['listen_address'] = '0.0.0.0:9100'
postgres_exporter['listen_address'] = '0.0.0.0:9187'
postgres_exporter['dbname'] = 'gitlabhq_production'
postgres_exporter['password'] = 'POSTGRESQL_PASSWORD_HASH'
# Set the PostgreSQL address and port
postgresql['listen_address'] = '0.0.0.0'
postgresql['port'] = 5432
# Replace POSTGRESQL_PASSWORD_HASH with a generated md5 value
postgresql['sql_user_password'] = 'POSTGRESQL_PASSWORD_HASH'
# Replace APPLICATION_SERVER_IP_BLOCK with the CIDR address of the application node
postgresql['trust_auth_cidr_addresses'] = %w(127.0.0.1/32 APPLICATION_SERVER_IP_BLOCK)
# Prevent database migrations from running on upgrade automatically
gitlab_rails['auto_migrate'] = false
```
1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the first Omnibus node you configured and add or replace
the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.
1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
1. Note the PostgreSQL node's IP address or hostname, port, and
plain text password. These will be necessary when configuring the
[GitLab application server](#configure-gitlab-rails) later.
Advanced [configuration options](https://docs.gitlab.com/omnibus/settings/database.html)
are supported and can be added if needed.
<div align="right">
<a type="button" class="btn btn-default" href="#setup-components">
Back to setup components <i class="fa fa-angle-double-up" aria-hidden="true"></i>
</a>
</div>
## Configure Redis
In this section, you'll be guided through configuring an external Redis instance
to be used with GitLab.
### Provide your own Redis instance
Redis version 5.0 or higher is required, as this is what ships with
Omnibus GitLab packages starting with GitLab 13.0. Older Redis versions
do not support an optional count argument to SPOP which is now required for
[Merge Trains](../../ci/pipelines/merge_trains.md).
In addition, GitLab makes use of certain commands like `UNLINK` and `USAGE` which
were introduced only in Redis 4.
Managed Redis from cloud providers such as AWS ElastiCache will work. If these
services support high availability, be sure it is not the Redis Cluster type.
Note the Redis node's IP address or hostname, port, and password (if required).
These will be necessary when configuring the
[GitLab application servers](#configure-gitlab-rails) later.
### Standalone Redis using Omnibus GitLab
The Omnibus GitLab package can be used to configure a standalone Redis server.
The steps below are the minimum necessary to configure a Redis server with
Omnibus:
1. SSH in to the Redis server.
1. [Download and install](https://about.gitlab.com/install/) the Omnibus GitLab
package of your choice. Be sure to follow _only_ installation steps 1 and 2
on the page.
1. Edit `/etc/gitlab/gitlab.rb` and add the contents:
```ruby
## Enable Redis
roles(["redis_master_role"])
redis['bind'] = '0.0.0.0'
redis['port'] = 6379
redis['password'] = 'SECRET_PASSWORD_HERE'
gitlab_rails['enable'] = false
# Set the network addresses that the exporters used for monitoring will listen on
node_exporter['listen_address'] = '0.0.0.0:9100'
redis_exporter['listen_address'] = '0.0.0.0:9121'
redis_exporter['flags'] = {
'redis.addr' => 'redis://0.0.0.0:6379',
'redis.password' => 'SECRET_PASSWORD_HERE',
}
```
1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the first Omnibus node you configured and add or replace
the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.
1. [Reconfigure Omnibus GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
1. Note the Redis node's IP address or hostname, port, and
Redis password. These will be necessary when
[configuring the GitLab application servers](#configure-gitlab-rails) later.
Advanced [configuration options](https://docs.gitlab.com/omnibus/settings/redis.html)
are supported and can be added if needed.
<div align="right">
<a type="button" class="btn btn-default" href="#setup-components">
Back to setup components <i class="fa fa-angle-double-up" aria-hidden="true"></i>
</a>
</div>
## Configure Gitaly
[Gitaly](../gitaly/index.md) server node requirements are dependent on data size,
specifically the number of projects and those projects' sizes.
NOTE:
The Reference Architecture specs have been designed with good headroom in mind
but for Gitaly, increased specs or switching to Gitaly Cluster
may be required for notably large data sets or load.
Due to Gitaly having notable input and output requirements, we strongly
recommend that all Gitaly nodes use solid-state drives (SSDs). These SSDs
should have a throughput of at least 8,000
input/output operations per second (IOPS) for read operations and 2,000 IOPS
for write operations. These IOPS values are initial recommendations, and may be
adjusted to greater or lesser values depending on the scale of your
environment's workload. If you're running the environment on a Cloud provider,
refer to their documentation about how to configure IOPS correctly.
Be sure to note the following items:
- The GitLab Rails application shards repositories into
[repository storage paths](../repository_storage_paths.md).
- A Gitaly server can host one or more storage paths.
- A GitLab server can use one or more Gitaly server nodes.
- Gitaly addresses must be specified to be correctly resolvable for *all*
Gitaly clients.
- Gitaly servers must not be exposed to the public internet, as Gitaly's network
traffic is unencrypted by default. The use of a firewall is highly recommended
to restrict access to the Gitaly server. Another option is to
[use TLS](#gitaly-tls-support).
NOTE:
The token referred to throughout the Gitaly documentation is an arbitrary
password selected by the administrator. This token is unrelated to tokens
created for the GitLab API or other similar web API tokens.
The following procedure describes how to configure a single Gitaly server named
`gitaly1.internal` with the secret token `gitalysecret`. We assume your GitLab
installation has two repository storages: `default` and `storage1`.
To configure the Gitaly server, on the server node you want to use for Gitaly:
1. [Download and install](https://about.gitlab.com/install/) the Omnibus GitLab
package of your choice. Be sure to follow _only_ installation steps 1 and 2
on the page, and _do not_ provide the `EXTERNAL_URL` value.
1. Edit the Gitaly server node's `/etc/gitlab/gitlab.rb` file to configure
storage paths, enable the network listener, and to configure the token:
NOTE:
You can't remove the `default` entry from `git_data_dirs` because [GitLab requires it](../gitaly/configure_gitaly.md#gitlab-requires-a-default-repository-storage).
<!--
Updates to example must be made at:
- https://gitlab.com/gitlab-org/charts/gitlab/blob/master/doc/advanced/external-gitaly/external-omnibus-gitaly.md#configure-omnibus-gitlab
- https://gitlab.com/gitlab-org/gitlab/blob/master/doc/administration/gitaly/index.md#gitaly-server-configuration
- all reference architecture pages
-->
```ruby
# Avoid running unnecessary services on the Gitaly server
postgresql['enable'] = false
redis['enable'] = false
nginx['enable'] = false
puma['enable'] = false
sidekiq['enable'] = false
gitlab_workhorse['enable'] = false
prometheus['enable'] = false
alertmanager['enable'] = false
grafana['enable'] = false
gitlab_exporter['enable'] = false
gitlab_kas['enable'] = false
# Prevent database migrations from running on upgrade automatically
gitlab_rails['auto_migrate'] = false
# Configure the gitlab-shell API callback URL. Without this, `git push` will
# fail. This can be your 'front door' GitLab URL or an internal load
# balancer.
gitlab_rails['internal_api_url'] = 'https://gitlab.example.com'
# Gitaly
gitaly['enable'] = true
# Make Gitaly accept connections on all network interfaces. You must use
# firewalls to restrict access to this address/port.
# Comment out following line if you only want to support TLS connections
gitaly['listen_addr'] = "0.0.0.0:8075"
gitaly['prometheus_listen_addr'] = "0.0.0.0:9236"
# Gitaly and GitLab use two shared secrets for authentication, one to authenticate gRPC requests
# to Gitaly, and a second for authentication callbacks from GitLab-Shell to the GitLab internal API.
# The following two values must be the same as their respective values
# of the GitLab Rails application setup
gitaly['auth_token'] = 'gitalysecret'
gitlab_shell['secret_token'] = 'shellsecret'
# Set the network addresses that the exporters used for monitoring will listen on
node_exporter['listen_address'] = '0.0.0.0:9100'
git_data_dirs({
'default' => {
'path' => '/var/opt/gitlab/git-data'
},
'storage1' => {
'path' => '/mnt/gitlab/git-data'
},
})
```
1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the first Omnibus node you configured and add or replace
the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.
1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
1. Confirm that Gitaly can perform callbacks to the internal API:
- For GitLab 15.3 and later, run `sudo /opt/gitlab/embedded/bin/gitaly check /var/opt/gitlab/gitaly/config.toml`.
- For GitLab 15.2 and earlier, run `sudo /opt/gitlab/embedded/bin/gitaly-hooks check /var/opt/gitlab/gitaly/config.toml`.
### Gitaly TLS support
Gitaly supports TLS encryption. To be able to communicate
with a Gitaly instance that listens for secure connections you will need to use `tls://` URL
scheme in the `gitaly_address` of the corresponding storage entry in the GitLab configuration.
You will need to bring your own certificates as this isn't provided automatically.
The certificate, or its certificate authority, must be installed on all Gitaly
nodes (including the Gitaly node using the certificate) and on all client nodes
that communicate with it following the procedure described in
[GitLab custom certificate configuration](https://docs.gitlab.com/omnibus/settings/ssl.html#install-custom-public-certificates).
NOTE:
The self-signed certificate must specify the address you use to access the
Gitaly server. If you are addressing the Gitaly server by a hostname, add it as a Subject Alternative
Name. If you are addressing the Gitaly server by its IP address, you must add it
as a Subject Alternative Name to the certificate.
It's possible to configure Gitaly servers with both an unencrypted listening
address (`listen_addr`) and an encrypted listening address (`tls_listen_addr`)
at the same time. This allows you to do a gradual transition from unencrypted to
encrypted traffic, if necessary.
To configure Gitaly with TLS:
1. Create the `/etc/gitlab/ssl` directory and copy your key and certificate there:
```shell
sudo mkdir -p /etc/gitlab/ssl
sudo chmod 755 /etc/gitlab/ssl
sudo cp key.pem cert.pem /etc/gitlab/ssl/
sudo chmod 644 key.pem cert.pem
```
1. Copy the cert to `/etc/gitlab/trusted-certs` so Gitaly will trust the cert when
calling into itself:
```shell
sudo cp /etc/gitlab/ssl/cert.pem /etc/gitlab/trusted-certs/
```
1. Edit `/etc/gitlab/gitlab.rb` and add:
<!-- Updates to following example must also be made at https://gitlab.com/gitlab-org/charts/gitlab/blob/master/doc/advanced/external-gitaly/external-omnibus-gitaly.md#configure-omnibus-gitlab -->
```ruby
gitaly['tls_listen_addr'] = "0.0.0.0:9999"
gitaly['certificate_path'] = "/etc/gitlab/ssl/cert.pem"
gitaly['key_path'] = "/etc/gitlab/ssl/key.pem"
```
1. Delete `gitaly['listen_addr']` to allow only encrypted connections.
1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
<div align="right">
<a type="button" class="btn btn-default" href="#setup-components">
Back to setup components <i class="fa fa-angle-double-up" aria-hidden="true"></i>
</a>
</div>
## Configure GitLab Rails
This section describes how to configure the GitLab application (Rails) component.
In our architecture, we run each GitLab Rails node using the Puma webserver, and
have its number of workers set to 90% of available CPUs, with four threads. For
nodes running Rails with other components, the worker value should be reduced
accordingly. We've determined that a worker value of 50% achieves a good balance,
but this is dependent on workload.
On each node perform the following:
1. If you're [using NFS](#configure-nfs-optional):
1. If necessary, install the NFS client utility packages using the following
commands:
```shell
# Ubuntu/Debian
apt-get install nfs-common
# CentOS/Red Hat
yum install nfs-utils nfs-utils-lib
```
1. Specify the necessary NFS mounts in `/etc/fstab`.
The exact contents of `/etc/fstab` will depend on how you chose
to configure your NFS server. See the [NFS documentation](../nfs.md)
for examples and the various options.
1. Create the shared directories. These may be different depending on your NFS
mount locations.
```shell
mkdir -p /var/opt/gitlab/.ssh /var/opt/gitlab/gitlab-rails/uploads /var/opt/gitlab/gitlab-rails/shared /var/opt/gitlab/gitlab-ci/builds /var/opt/gitlab/git-data
```
1. [Download and install](https://about.gitlab.com/install/) the Omnibus GitLab
package of your choice. Be sure to follow _only_ installation steps 1 and 2
on the page.
1. Create or edit `/etc/gitlab/gitlab.rb` and use the following configuration.
To maintain uniformity of links across nodes, the `external_url`
on the application server should point to the external URL that users will use
to access GitLab. This would be the URL of the [load balancer](#configure-the-external-load-balancer)
which will route traffic to the GitLab application server:
```ruby
external_url 'https://gitlab.example.com'
# Gitaly and GitLab use two shared secrets for authentication, one to authenticate gRPC requests
# to Gitaly, and a second for authentication callbacks from GitLab-Shell to the GitLab internal API.
# The following two values must be the same as their respective values
# of the Gitaly setup
gitlab_rails['gitaly_token'] = 'gitalysecret'
gitlab_shell['secret_token'] = 'shellsecret'
git_data_dirs({
'default' => { 'gitaly_address' => 'tcp://gitaly1.internal:8075' },
'storage1' => { 'gitaly_address' => 'tcp://gitaly1.internal:8075' },
'storage2' => { 'gitaly_address' => 'tcp://gitaly2.internal:8075' },
})
## Disable components that will not be on the GitLab application server
roles(['application_role'])
gitaly['enable'] = false
nginx['enable'] = true
## PostgreSQL connection details
gitlab_rails['db_adapter'] = 'postgresql'
gitlab_rails['db_encoding'] = 'unicode'
gitlab_rails['db_host'] = '10.1.0.5' # IP/hostname of database server
gitlab_rails['db_password'] = 'DB password'
## Redis connection details
gitlab_rails['redis_port'] = '6379'
gitlab_rails['redis_host'] = '10.1.0.6' # IP/hostname of Redis server
gitlab_rails['redis_password'] = 'Redis Password'
# Set the network addresses that the exporters used for monitoring will listen on
node_exporter['listen_address'] = '0.0.0.0:9100'
gitlab_workhorse['prometheus_listen_addr'] = '0.0.0.0:9229'
puma['listen'] = '0.0.0.0'
sidekiq['listen_address'] = "0.0.0.0"
# Configure Sidekiq with 2 workers and 10 max concurrency
sidekiq['max_concurrency'] = 10
sidekiq['queue_groups'] = ['*'] * 2
# Add the monitoring node's IP address to the monitoring whitelist and allow it to
# scrape the NGINX metrics. Replace placeholder `monitoring.gitlab.example.com` with
# the address and/or subnets gathered from the monitoring node
gitlab_rails['monitoring_whitelist'] = ['<MONITOR NODE IP>/32', '127.0.0.0/8']
nginx['status']['options']['allow'] = ['<MONITOR NODE IP>/32', '127.0.0.0/8']
# Object Storage
# This is an example for configuring Object Storage on GCP
# Replace this config with your chosen Object Storage provider as desired
gitlab_rails['object_store']['enabled'] = true
gitlab_rails['object_store']['connection'] = {
'provider' => 'Google',
'google_project' => '<gcp-project-name>',
'google_json_key_location' => '<path-to-gcp-service-account-key>'
}
gitlab_rails['object_store']['objects']['artifacts']['bucket'] = "<gcp-artifacts-bucket-name>"
gitlab_rails['object_store']['objects']['external_diffs']['bucket'] = "<gcp-external-diffs-bucket-name>"
gitlab_rails['object_store']['objects']['lfs']['bucket'] = "<gcp-lfs-bucket-name>"
gitlab_rails['object_store']['objects']['uploads']['bucket'] = "<gcp-uploads-bucket-name>"
gitlab_rails['object_store']['objects']['packages']['bucket'] = "<gcp-packages-bucket-name>"
gitlab_rails['object_store']['objects']['dependency_proxy']['bucket'] = "<gcp-dependency-proxy-bucket-name>"
gitlab_rails['object_store']['objects']['terraform_state']['bucket'] = "<gcp-terraform-state-bucket-name>"
gitlab_rails['backup_upload_connection'] = {
'provider' => 'Google',
'google_project' => '<gcp-project-name>',
'google_json_key_location' => '<path-to-gcp-service-account-key>'
}
gitlab_rails['backup_upload_remote_directory'] = "<gcp-backups-state-bucket-name>"
## Uncomment and edit the following options if you have set up NFS
##
## Prevent GitLab from starting if NFS data mounts are not available
##
#high_availability['mountpoint'] = '/var/opt/gitlab/git-data'
##
## Ensure UIDs and GIDs match between servers for permissions via NFS
##
#user['uid'] = 9000
#user['gid'] = 9000
#web_server['uid'] = 9001
#web_server['gid'] = 9001
#registry['uid'] = 9002
#registry['gid'] = 9002
```
1. If you're using [Gitaly with TLS support](#gitaly-tls-support), make sure the
`git_data_dirs` entry is configured with `tls` instead of `tcp`:
```ruby
git_data_dirs({
'default' => { 'gitaly_address' => 'tls://gitaly1.internal:9999' },
'storage1' => { 'gitaly_address' => 'tls://gitaly1.internal:9999' },
'storage2' => { 'gitaly_address' => 'tls://gitaly2.internal:9999' },
})
```
1. Copy the cert into `/etc/gitlab/trusted-certs`:
```shell
sudo cp cert.pem /etc/gitlab/trusted-certs/
```
1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the first Omnibus node you configured and add or replace
the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.
1. To ensure database migrations are only run during reconfigure and not automatically on upgrade, run:
```shell
sudo touch /etc/gitlab/skip-auto-reconfigure
```
Only a single designated node should handle migrations as detailed in the
[GitLab Rails post-configuration](#gitlab-rails-post-configuration) section.
1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
1. If you're not using NFS, [enable incremental logging](#enable-incremental-logging).
1. Run `sudo gitlab-rake gitlab:gitaly:check` to confirm the node can connect to Gitaly.
1. Tail the logs to see the requests:
```shell
sudo gitlab-ctl tail gitaly
```
When you specify `https` in the `external_url`, as in the previous example,
GitLab expects that the SSL certificates are in `/etc/gitlab/ssl/`. If the
certificates aren't present, NGINX will fail to start. For more information, see
the [HTTPS documentation](https://docs.gitlab.com/omnibus/settings/ssl.html).
### GitLab Rails post-configuration
1. Designate one application node for running database migrations during
installation and updates. Initialize the GitLab database and ensure all
migrations ran:
```shell
sudo gitlab-rake gitlab:db:configure
```
If you encounter a `rake aborted!` error message stating that PgBouncer is
failing to connect to PostgreSQL, it may be that your PgBouncer node's IP
address is missing from PostgreSQL's `trust_auth_cidr_addresses` in `gitlab.rb`
on your database nodes. Before proceeding, see
[PgBouncer error `ERROR: pgbouncer cannot connect to server`](../postgresql/replication_and_failover.md#pgbouncer-error-error-pgbouncer-cannot-connect-to-server).
1. [Configure fast lookup of authorized SSH keys in the database](../operations/fast_ssh_key_lookup.md).
<div align="right">
<a type="button" class="btn btn-default" href="#setup-components">
Back to setup components <i class="fa fa-angle-double-up" aria-hidden="true"></i>
</a>
</div>
## Configure Prometheus
The Omnibus GitLab package can be used to configure a standalone Monitoring node
running [Prometheus](../monitoring/prometheus/index.md) and
[Grafana](../monitoring/performance/grafana_configuration.md):
1. SSH in to the Monitoring node.
1. [Download and install](https://about.gitlab.com/install/) the Omnibus GitLab
package of your choice. Be sure to follow _only_ installation steps 1 and 2
on the page.
1. Edit `/etc/gitlab/gitlab.rb` and add the contents:
```ruby
roles(['monitoring_role'])
external_url 'http://gitlab.example.com'
# Prometheus
prometheus['listen_address'] = '0.0.0.0:9090'
prometheus['monitor_kubernetes'] = false
# Grafana
grafana['enable'] = true
grafana['admin_password'] = '<grafana_password>'
grafana['disable_login_form'] = false
# Nginx - For Grafana access
nginx['enable'] = true
```
1. Prometheus also needs some scrape configurations to pull all the data from the various
nodes where we configured exporters. Assuming that your nodes' IPs are:
```plaintext
1.1.1.1: postgres
1.1.1.2: redis
1.1.1.3: gitaly1
1.1.1.4: rails1
1.1.1.5: rails2
```
Add the following to `/etc/gitlab/gitlab.rb`:
```ruby
prometheus['scrape_configs'] = [
{
'job_name': 'postgres',
'static_configs' => [
'targets' => ['1.1.1.1:9187'],
],
},
{
'job_name': 'redis',
'static_configs' => [
'targets' => ['1.1.1.2:9121'],
],
},
{
'job_name': 'gitaly',
'static_configs' => [
'targets' => ['1.1.1.3:9236'],
],
},
{
'job_name': 'gitlab-nginx',
'static_configs' => [
'targets' => ['1.1.1.4:8060', '1.1.1.5:8060'],
],
},
{
'job_name': 'gitlab-workhorse',
'static_configs' => [
'targets' => ['1.1.1.4:9229', '1.1.1.5:9229'],
],
},
{
'job_name': 'gitlab-rails',
'metrics_path': '/-/metrics',
'static_configs' => [
'targets' => ['1.1.1.4:8080', '1.1.1.5:8080'],
],
},
{
'job_name': 'gitlab-sidekiq',
'static_configs' => [
'targets' => ['1.1.1.4:8082', '1.1.1.5:8082'],
],
},
{
'job_name': 'node',
'static_configs' => [
'targets' => ['1.1.1.1:9100', '1.1.1.2:9100', '1.1.1.3:9100', '1.1.1.4:9100', '1.1.1.5:9100'],
],
},
]
```
1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
1. In the GitLab UI, set `admin/application_settings/metrics_and_profiling` > Metrics - Grafana to `/-/grafana` to
`http[s]://<MONITOR NODE>/-/grafana`
<div align="right">
<a type="button" class="btn btn-default" href="#setup-components">
Back to setup components <i class="fa fa-angle-double-up" aria-hidden="true"></i>
</a>
</div>
## Configure the object storage
GitLab supports using an object storage service for holding numerous types of data.
It's recommended over [NFS](#configure-nfs-optional) and in general it's better
in larger setups as object storage is typically much more performant, reliable,
and scalable.
GitLab has been tested on a number of object storage providers:
- [Amazon S3](https://aws.amazon.com/s3/)
- [Google Cloud Storage](https://cloud.google.com/storage)
- [Digital Ocean Spaces](https://www.digitalocean.com/products/spaces)
- [Oracle Cloud Infrastructure](https://docs.cloud.oracle.com/en-us/iaas/Content/Object/Tasks/s3compatibleapi.htm)
- [OpenStack Swift (S3 compatibility mode)](https://docs.openstack.org/swift/latest/s3_compat.html)
- [Azure Blob storage](https://learn.microsoft.com/en-us/azure/storage/blobs/storage-blobs-introduction)
- MinIO. We have [a guide to deploying this](https://docs.gitlab.com/charts/advanced/external-object-storage/minio.html) within our Helm Chart documentation.
There are two ways of specifying object storage configuration in GitLab:
- [Consolidated form](../object_storage.md#consolidated-object-storage-configuration): A single credential is
shared by all supported object types.
- [Storage-specific form](../object_storage.md#storage-specific-configuration): Every object defines its
own object storage [connection and configuration](../object_storage.md#connection-settings).
The consolidated form is used in the following examples when available.
NOTE:
When using the [storage-specific form](../object_storage.md#storage-specific-configuration)
in GitLab 14.x and earlier, you should enable [direct upload mode](../../development/uploads/index.md#direct-upload).
The previous [background upload](../../development/uploads/index.md#direct-upload) mode,
which was deprecated in 14.9, requires shared storage such as [NFS](#configure-nfs-optional).
Using separate buckets for each data type is the recommended approach for GitLab.
This ensures there are no collisions across the various types of data GitLab stores.
There are plans to [enable the use of a single bucket](https://gitlab.com/gitlab-org/gitlab/-/issues/292958)
in the future.
<div align="right">
<a type="button" class="btn btn-default" href="#setup-components">
Back to setup components <i class="fa fa-angle-double-up" aria-hidden="true"></i>
</a>
</div>
### Enable incremental logging
GitLab Runner returns job logs in chunks which Omnibus GitLab caches temporarily on disk in `/var/opt/gitlab/gitlab-ci/builds` by default, even when using consolidated object storage. With default configuration, this directory needs to be shared through NFS on any GitLab Rails and Sidekiq nodes.
While sharing the job logs through NFS is supported, it's recommended to avoid the need to use NFS by enabling [incremental logging](../job_logs.md#incremental-logging-architecture) (required when no NFS node has been deployed). Incremental logging uses Redis instead of disk space for temporary caching of job logs.
## Configure NFS (optional)
For improved performance, [object storage](#configure-the-object-storage),
along with [Gitaly](#configure-gitaly), are recommended over using NFS whenever
possible.
See how to [configure NFS](../nfs.md).
WARNING:
Engineering support for NFS for Git repositories is deprecated, and [technical support is scheduled to be unavailable](../nfs.md#gitaly-and-nfs-deprecation)
after the release of GitLab 15.6. No further enhancements are planned for this feature.
Read:
- [Gitaly and NFS Deprecation](../nfs.md#gitaly-and-nfs-deprecation).
- About the [correct mount options to use](../nfs.md#upgrade-to-gitaly-cluster-or-disable-caching-if-experiencing-data-loss).
## Configure Advanced Search **(PREMIUM SELF)**
You can leverage Elasticsearch and [enable Advanced Search](../../integration/advanced_search/elasticsearch.md)
for faster, more advanced code search across your entire GitLab instance.
Elasticsearch cluster design and requirements are dependent on your specific
data. For recommended best practices about how to set up your Elasticsearch
cluster alongside your instance, read how to
[choose the optimal cluster configuration](../../integration/advanced_search/elasticsearch.md#guidance-on-choosing-optimal-cluster-configuration).
<div align="right">
<a type="button" class="btn btn-default" href="#setup-components">
Back to setup components <i class="fa fa-angle-double-up" aria-hidden="true"></i>
</a>
</div>
## Cloud Native Hybrid reference architecture with Helm Charts (alternative)
As an alternative approach, you can also run select components of GitLab as Cloud Native
in Kubernetes via our official [Helm Charts](https://docs.gitlab.com/charts/).
In this setup, we support running the equivalent of GitLab Rails and Sidekiq nodes
in a Kubernetes cluster, named Webservice and Sidekiq respectively. In addition,
the following other supporting services are supported: NGINX, Task Runner, Migrations,
Prometheus, and Grafana.
Hybrid installations leverage the benefits of both cloud native and traditional
compute deployments. With this, _stateless_ components can benefit from cloud native
workload management benefits while _stateful_ components are deployed in compute VMs
with Omnibus to benefit from increased permanence.
The 2,000 reference architecture is not a highly-available setup. To achieve HA, you can follow a modified [3K reference architecture](3k_users.md#cloud-native-hybrid-reference-architecture-with-helm-charts-alternative).
NOTE:
This is an **advanced** setup. Running services in Kubernetes is well known
to be complex. **This setup is only recommended** if you have strong working
knowledge and experience in Kubernetes. The rest of this
section assumes this.
NOTE:
**Gitaly Cluster is not supported to be run in Kubernetes**.
Refer to [epic 6127](https://gitlab.com/groups/gitlab-org/-/epics/6127) for more details.
### Cluster topology
The following tables and diagram detail the hybrid environment using the same formats
as the normal environment above.
First are the components that run in Kubernetes. The recommendation at this time is to
use Google Cloud's Kubernetes Engine (GKE) or AWS Elastic Kubernetes Service (EKS) and associated machine types, but the memory
and CPU requirements should translate to most other providers. We hope to update this in the
future with further specific cloud provider details.
| Service | Nodes | Configuration | GCP | AWS | Min Allocatable CPUs and Memory |
|---------------------|-------|------------------------|-----------------|--------------|---------------------------------|
| Webservice | 3 | 8 vCPU, 7.2 GB memory | `n1-highcpu-8` | `c5.2xlarge` | 23.7 vCPU, 16.9 GB memory |
| Sidekiq | 2 | 4 vCPU, 15 GB memory | `n1-standard-4` | `m5.xlarge` | 7.8 vCPU, 25.9 GB memory |
| Supporting services | 2 | 2 vCPU, 7.5 GB memory | `n1-standard-2` | `m5.large` | 1.9 vCPU, 5.5 GB memory |
- For this setup, we **recommend** and regularly [test](index.md#validation-and-test-results)
[Google Kubernetes Engine (GKE)](https://cloud.google.com/kubernetes-engine) and [Amazon Elastic Kubernetes Service (EKS)](https://aws.amazon.com/eks/). Other Kubernetes services may also work, but your mileage may vary.
- Nodes configuration is shown as it is forced to ensure pod vCPU / memory ratios and avoid scaling during **performance testing**.
- In production deployments, there is no need to assign pods to nodes. A minimum of three nodes in three different availability zones is strongly recommended to align with resilient cloud architecture practices.
Next are the backend components that run on static compute VMs via Omnibus (or External PaaS
services where applicable):
| Service | Nodes | Configuration | GCP | AWS |
|----------------------------|-------|------------------------|-----------------|-------------|
| PostgreSQL<sup>1</sup> | 1 | 2 vCPU, 7.5 GB memory | `n1-standard-2` | `m5.large` |
| Redis<sup>2</sup> | 1 | 1 vCPU, 3.75 GB memory | `n1-standard-1` | `m5.large` |
| Gitaly | 1 | 4 vCPU, 15 GB memory | `n1-standard-4` | `m5.xlarge` |
| Object storage<sup>3</sup> | - | - | - | - |
<!-- Disable ordered list rule https://github.com/DavidAnson/markdownlint/blob/main/doc/Rules.md#md029---ordered-list-item-prefix -->
<!-- markdownlint-disable MD029 -->
1. Can be optionally run on reputable third-party external PaaS PostgreSQL solutions. See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
- [Google Cloud SQL](https://cloud.google.com/sql/docs/postgres/high-availability#normal) and [Amazon RDS](https://aws.amazon.com/rds/) are known to work.
- [Google AlloyDB](https://cloud.google.com/alloydb) and [Amazon RDS Multi-AZ DB clusters](https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/multi-az-db-clusters-concepts.html) have not been tested and are not recommended. Both solutions are specifically not expected to work with GitLab Geo.
- [Amazon Aurora](https://aws.amazon.com/rds/aurora/) is **incompatible** with load balancing enabled by default in [14.4.0](../../update/index.md#1440), and [Azure Database for PostgreSQL](https://azure.microsoft.com/en-gb/services/postgresql/) is **not recommended** due to [performance issues](https://gitlab.com/gitlab-org/quality/reference-architectures/-/issues/61).
- Consul is primarily used for Omnibus PostgreSQL high availability so can be ignored when using a PostgreSQL PaaS setup. However, Consul is also used optionally by Prometheus for Omnibus auto host discovery.
2. Can be optionally run on reputable third-party external PaaS Redis solutions. See [Recommended cloud providers and services](index.md#recommended-cloud-providers-and-services) for more information.
- [Google Memorystore](https://cloud.google.com/memorystore) and [Amazon ElastiCache](https://aws.amazon.com/elasticache/) are known to work.
3. Should be run on reputable Cloud Provider or Self Managed solutions. More information can be found in the [Configure the object storage](#configure-the-object-storage) section.
<!-- markdownlint-enable MD029 -->
NOTE:
For all PaaS solutions that involve configuring instances, it is strongly recommended to implement a minimum of three nodes in three different availability zones to align with resilient cloud architecture practices.
```plantuml
@startuml 2k
skinparam linetype ortho
card "Kubernetes via Helm Charts" as kubernetes {
card "**External Load Balancer**" as elb #6a9be7
together {
collections "**Webservice** x3" as gitlab #32CD32
collections "**Sidekiq** x2" as sidekiq #ff8dd1
}
collections "**Supporting Services** x2" as support
}
card "**Gitaly**" as gitaly #FF8C00
card "**PostgreSQL**" as postgres #4EA7FF
card "**Redis**" as redis #FF6347
cloud "**Object Storage**" as object_storage #white
elb -[#6a9be7]-> gitlab
gitlab -[#32CD32]--> gitaly
gitlab -[#32CD32]--> postgres
gitlab -[#32CD32]-> object_storage
gitlab -[#32CD32]--> redis
sidekiq -[#ff8dd1]--> gitaly
sidekiq -[#ff8dd1]-> object_storage
sidekiq -[#ff8dd1]--> postgres
sidekiq -[#ff8dd1]--> redis
@enduml
```
### Resource usage settings
The following formulas help when calculating how many pods may be deployed within resource constraints.
The [2k reference architecture example values file](https://gitlab.com/gitlab-org/charts/gitlab/-/blob/master/examples/ref/2k.yaml)
documents how to apply the calculated configuration to the Helm Chart.
#### Webservice
Webservice pods typically need about 1 CPU and 1.25 GB of memory _per worker_.
Each Webservice pod consumes roughly 4 CPUs and 5 GB of memory using
the [recommended topology](#cluster-topology) because two worker processes
are created by default and each pod has other small processes running.
For 2,000 users we recommend a total Puma worker count of around 12.
With the [provided recommendations](#cluster-topology) this allows the deployment of up to 3
Webservice pods with 4 workers per pod and 1 pod per node. Expand available resources using
the ratio of 1 CPU to 1.25 GB of memory _per each worker process_ for each additional
Webservice pod.
For further information on resource usage, see the [Webservice resources](https://docs.gitlab.com/charts/charts/gitlab/webservice/#resources).
#### Sidekiq
Sidekiq pods should generally have 0.9 CPU and 2 GB of memory.
[The provided starting point](#cluster-topology) allows the deployment of up to
4 Sidekiq pods. Expand available resources using the 0.9 CPU to 2 GB memory
ratio for each additional pod.
For further information on resource usage, see the [Sidekiq resources](https://docs.gitlab.com/charts/charts/gitlab/sidekiq/#resources).
### Supporting
The Supporting Node Pool is designed to house all supporting deployments that don't need to be
on the Webservice and Sidekiq pools.
This includes various deployments related to the Cloud Provider's implementation and supporting
GitLab deployments such as NGINX or [GitLab Shell](https://docs.gitlab.com/charts/charts/gitlab/gitlab-shell/).
If you wish to make any additional deployments, such as for Monitoring, it's recommended
to deploy these in this pool where possible and not in the Webservice or Sidekiq pools, as the Supporting pool has been designed
specifically to accommodate several additional deployments. However, if your deployments don't fit into the
pool as given, you can increase the node pool accordingly.
<div align="right">
<a type="button" class="btn btn-default" href="#setup-components">
Back to setup components <i class="fa fa-angle-double-up" aria-hidden="true"></i>
</a>
</div>
View git blame Copy permalink