246 lines
12 KiB
Markdown
246 lines
12 KiB
Markdown
# Elasticsearch knowledge **(STARTER ONLY)**
|
|
|
|
This area is to maintain a compendium of useful information when working with elasticsearch.
|
|
|
|
Information on how to enable Elasticsearch and perform the initial indexing is kept in ../integration/elasticsearch.md#enabling-elasticsearch
|
|
|
|
## Deep Dive
|
|
|
|
In June 2019, Mario de la Ossa hosted a [Deep Dive] on GitLab's [Elasticsearch integration] to share his domain specific knowledge with anyone who may work in this part of the code base in the future. You can find the [recording on YouTube], and the slides on [Google Slides] and in [PDF]. Everything covered in this deep dive was accurate as of GitLab 12.0, and while specific details may have changed since then, it should still serve as a good introduction.
|
|
|
|
[Deep Dive]: https://gitlab.com/gitlab-org/create-stage/issues/1
|
|
[Elasticsearch integration]: ../integration/elasticsearch.md
|
|
[recording on YouTube]: https://www.youtube.com/watch?v=vrvl-tN2EaA
|
|
[Google Slides]: https://docs.google.com/presentation/d/1H-pCzI_LNrgrL5pJAIQgvLX8Ji0-jIKOg1QeJQzChug/edit
|
|
[PDF]: https://gitlab.com/gitlab-org/create-stage/uploads/c5aa32b6b07476fa8b597004899ec538/Elasticsearch_Deep_Dive.pdf
|
|
|
|
## Initial installation on OS X
|
|
|
|
It is recommended to use the Docker image. After installing docker you can immediately spin up an instance with
|
|
|
|
```
|
|
docker run --name elastic56 -p 9200:9200 -p 9300:9300 -e "discovery.type=single-node" docker.elastic.co/elasticsearch/elasticsearch:5.6.12
|
|
```
|
|
|
|
and use `docker stop elastic56` and `docker start elastic56` to stop/start it.
|
|
|
|
### Installing on the host
|
|
|
|
We currently only support Elasticsearch [5.6 to 6.x](../integration/elasticsearch.md#version-requirements)
|
|
|
|
Version 5.6 is available on homebrew and is the recommended version to use in order to test compatibility.
|
|
|
|
```
|
|
brew install elasticsearch@5.6
|
|
```
|
|
|
|
There is no need to install any plugins
|
|
|
|
## New repo indexer (beta)
|
|
|
|
If you're interested on working with the new beta repo indexer, all you need to do is:
|
|
|
|
```sh
|
|
git clone git@gitlab.com:gitlab-org/gitlab-elasticsearch-indexer.git
|
|
make
|
|
make install
|
|
```
|
|
|
|
this adds `gitlab-elasticsearch-indexer` to `$GOPATH/bin`, please make sure that is in your `$PATH`. After that GitLab will find it and you'll be able to enable it in the admin settings area.
|
|
|
|
**note:** `make` will not recompile the executable unless you do `make clean` beforehand
|
|
|
|
## Helpful rake tasks
|
|
|
|
- `gitlab:elastic:test:index_size`: Tells you how much space the current index is using, as well as how many documents are in the index.
|
|
- `gitlab:elastic:test:index_size_change`: Outputs index size, reindexes, and outputs index size again. Useful when testing improvements to indexing size.
|
|
|
|
Additionally, if you need large repos or multiple forks for testing, please consider [following these instructions](rake_tasks.md#extra-project-seed-options)
|
|
|
|
## How does it work?
|
|
|
|
The Elasticsearch integration depends on an external indexer. We ship an [indexer written in Go](https://gitlab.com/gitlab-org/gitlab-elasticsearch-indexer). The user must trigger the initial indexing via a rake task but, after this is done, GitLab itself will trigger reindexing when required via `after_` callbacks on create, update, and destroy that are inherited from [/ee/app/models/concerns/elastic/application_search.rb](https://gitlab.com/gitlab-org/gitlab/blob/cc723071ad337573e0360a879cbf99bc4fb7adb9/ee/app/models/concerns/elastic/application_versioned_search.rb).
|
|
|
|
All indexing after the initial one is done via `ElasticIndexerWorker` (sidekiq jobs).
|
|
|
|
Search queries are generated by the concerns found in [ee/app/models/concerns/elastic](https://gitlab.com/gitlab-org/gitlab/tree/master/ee/app/models/concerns/elastic). These concerns are also in charge of access control, and have been a historic source of security bugs so please pay close attention to them!
|
|
|
|
## Existing Analyzers/Tokenizers/Filters
|
|
|
|
These are all defined in <https://gitlab.com/gitlab-org/gitlab/blob/master/ee/lib/elasticsearch/git/model.rb>
|
|
|
|
### Analyzers
|
|
|
|
#### `path_analyzer`
|
|
|
|
Used when indexing blobs' paths. Uses the `path_tokenizer` and the `lowercase` and `asciifolding` filters.
|
|
|
|
Please see the `path_tokenizer` explanation below for an example.
|
|
|
|
#### `sha_analyzer`
|
|
|
|
Used in blobs and commits. Uses the `sha_tokenizer` and the `lowercase` and `asciifolding` filters.
|
|
|
|
Please see the `sha_tokenizer` explanation later below for an example.
|
|
|
|
#### `code_analyzer`
|
|
|
|
Used when indexing a blob's filename and content. Uses the `whitespace` tokenizer and the filters: `code`, `edgeNGram_filter`, `lowercase`, and `asciifolding`
|
|
|
|
The `whitespace` tokenizer was selected in order to have more control over how tokens are split. For example the string `Foo::bar(4)` needs to generate tokens like `Foo` and `bar(4)` in order to be properly searched.
|
|
|
|
Please see the `code` filter for an explanation on how tokens are split.
|
|
|
|
#### `code_search_analyzer`
|
|
|
|
Not directly used for indexing, but rather used to transform a search input. Uses the `whitespace` tokenizer and the `lowercase` and `asciifolding` filters.
|
|
|
|
### Tokenizers
|
|
|
|
#### `sha_tokenizer`
|
|
|
|
This is a custom tokenizer that uses the [`edgeNGram` tokenizer](https://www.elastic.co/guide/en/elasticsearch/reference/5.5/analysis-edgengram-tokenizer.html) to allow SHAs to be searcheable by any sub-set of it (minimum of 5 chars).
|
|
|
|
Example:
|
|
|
|
`240c29dc7e` becomes:
|
|
|
|
- `240c2`
|
|
- `240c29`
|
|
- `240c29d`
|
|
- `240c29dc`
|
|
- `240c29dc7`
|
|
- `240c29dc7e`
|
|
|
|
#### `path_tokenizer`
|
|
|
|
This is a custom tokenizer that uses the [`path_hierarchy` tokenizer](https://www.elastic.co/guide/en/elasticsearch/reference/5.5/analysis-pathhierarchy-tokenizer.html) with `reverse: true` in order to allow searches to find paths no matter how much or how little of the path is given as input.
|
|
|
|
Example:
|
|
|
|
`'/some/path/application.js'` becomes:
|
|
|
|
- `'/some/path/application.js'`
|
|
- `'some/path/application.js'`
|
|
- `'path/application.js'`
|
|
- `'application.js'`
|
|
|
|
### Filters
|
|
|
|
#### `code`
|
|
|
|
Uses a [Pattern Capture token filter](https://www.elastic.co/guide/en/elasticsearch/reference/5.5/analysis-pattern-capture-tokenfilter.html) to split tokens into more easily searched versions of themselves.
|
|
|
|
Patterns:
|
|
|
|
- `"(\\p{Ll}+|\\p{Lu}\\p{Ll}+|\\p{Lu}+)"`: captures CamelCased and lowedCameCased strings as separate tokens
|
|
- `"(\\d+)"`: extracts digits
|
|
- `"(?=([\\p{Lu}]+[\\p{L}]+))"`: captures CamelCased strings recursively. Ex: `ThisIsATest` => `[ThisIsATest, IsATest, ATest, Test]`
|
|
- `'"((?:\\"|[^"]|\\")*)"'`: captures terms inside quotes, removing the quotes
|
|
- `"'((?:\\'|[^']|\\')*)'"`: same as above, for single-quotes
|
|
- `'\.([^.]+)(?=\.|\s|\Z)'`: separate terms with periods in-between
|
|
- `'\/?([^\/]+)(?=\/|\b)'`: separate path terms `like/this/one`
|
|
|
|
#### `edgeNGram_filter`
|
|
|
|
Uses an [Edge NGram token filter](https://www.elastic.co/guide/en/elasticsearch/reference/5.5/analysis-edgengram-tokenfilter.html) to allow inputs with only parts of a token to find the token. For example it would turn `glasses` into permutations starting with `gl` and ending with `glasses`, which would allow a search for "`glass`" to find the original token `glasses`
|
|
|
|
## Gotchas
|
|
|
|
- Searches can have their own analyzers. Remember to check when editing analyzers
|
|
- `Character` filters (as opposed to token filters) always replace the original character, so they're not a good choice as they can hinder exact searches
|
|
|
|
## Zero downtime reindexing with multiple indices
|
|
|
|
Currently GitLab can only handle a single version of setting. Any setting/schema changes would require reindexing everything from scratch. Since reindexing can take a long time, this can cause search functionality downtime.
|
|
|
|
To avoid downtime, GitLab is working to support multiple indices that
|
|
can function at the same time. Whenever the schema changes, the admin
|
|
will be able to create a new index and reindex to it, while searches
|
|
continue to go to the older, stable index. Any data updates will be
|
|
forwarded to both indices. Once the new index is ready, an admin can
|
|
mark it active, which will direct all searches to it, and remove the old
|
|
index.
|
|
|
|
This is also helpful for migrating to new servers, e.g. moving to/from AWS.
|
|
|
|
Currently we are on the process of migrating to this new design. Everything is hardwired to work with one single version for now.
|
|
|
|
### Architecture
|
|
|
|
The traditional setup, provided by `elasticsearch-rails`, is to communicate through its internal proxy classes. Developers would write model-specific logic in a module for the model to include in (e.g. `SnippetsSearch`). The `__elasticsearch__` methods would return a proxy object, e.g.:
|
|
|
|
- `Issue.__elasticsearch__` returns an instance of `Elasticsearch::Model::Proxy::ClassMethodsProxy`
|
|
- `Issue.first.__elasticsearch__` returns an instance of `Elasticsearch::Model::Proxy::InstanceMethodsProxy`.
|
|
|
|
These proxy objects would talk to Elasticsearch server directly (see top half of the diagram).
|
|
|
|
![Elasticsearch Architecture](img/elasticsearch_architecture.svg)
|
|
|
|
In the planned new design, each model would have a pair of corresponding subclassed proxy objects, in which model-specific logic is located. For example, `Snippet` would have `SnippetClassProxy` and `SnippetInstanceProxy` (being subclass of `Elasticsearch::Model::Proxy::ClassMethodsProxy` and `Elasticsearch::Model::Proxy::InstanceMethodsProxy`, respectively).
|
|
|
|
`__elasticsearch__` would represent another layer of proxy object, keeping track of multiple actual proxy objects. It would forward method calls to the appropriate index. For example:
|
|
|
|
- `model.__elasticsearch__.search` would be forwarded to the one stable index, since it is a read operation.
|
|
- `model.__elasticsearch__.update_document` would be forwarded to all indices, to keep all indices up-to-date.
|
|
|
|
The global configurations per version are now in the `Elastic::(Version)::Config` class. You can change mappings there.
|
|
|
|
### Creating new version of schema
|
|
|
|
NOTE: **Note:** this is not applicable yet as multiple indices functionality is not fully implemented.
|
|
|
|
Folders like `ee/lib/elastic/v12p1` contain snapshots of search logic from different versions. To keep a continuous Git history, the latest version lives under `ee/lib/elastic/latest`, but its classes are aliased under an actual version (e.g. `ee/lib/elastic/v12p3`). When referencing these classes, never use the `Latest` namespace directly, but use the actual version (e.g. `V12p3`).
|
|
|
|
The version name basically follows GitLab's release version. If setting is changed in 12.3, we will create a new namespace called `V12p3` (p stands for "point"). Raise an issue if there is a need to name a version differently.
|
|
|
|
If the current version is `v12p1`, and we need to create a new version for `v12p3`, the steps are as follows:
|
|
|
|
1. Copy the entire folder of `v12p1` as `v12p3`
|
|
1. Change the namespace for files under `v12p3` folder from `V12p1` to `V12p3` (which are still aliased to `Latest`)
|
|
1. Delete `v12p1` folder
|
|
1. Copy the entire folder of `latest` as `v12p1`
|
|
1. Change the namespace for files under `v12p1` folder from `Latest` to `V12p1`
|
|
1. Make changes to files under the `latest` folder as needed
|
|
|
|
## Troubleshooting
|
|
|
|
### Getting `flood stage disk watermark [95%] exceeded`
|
|
|
|
You might get an error such as
|
|
|
|
```
|
|
[2018-10-31T15:54:19,762][WARN ][o.e.c.r.a.DiskThresholdMonitor] [pval5Ct]
|
|
flood stage disk watermark [95%] exceeded on
|
|
[pval5Ct7SieH90t5MykM5w][pval5Ct][/usr/local/var/lib/elasticsearch/nodes/0] free: 56.2gb[3%],
|
|
all indices on this node will be marked read-only
|
|
```
|
|
|
|
This is because you've exceeded the disk space threshold - it thinks you don't have enough disk space left, based on the default 95% threshold.
|
|
|
|
In addition, the `read_only_allow_delete` setting will be set to `true`. It will block indexing, `forcemerge`, etc
|
|
|
|
```
|
|
curl "http://localhost:9200/gitlab-development/_settings?pretty"
|
|
```
|
|
|
|
Add this to your `elasticsearch.yml` file:
|
|
|
|
```
|
|
# turn off the disk allocator
|
|
cluster.routing.allocation.disk.threshold_enabled: false
|
|
```
|
|
|
|
_or_
|
|
|
|
```
|
|
# set your own limits
|
|
cluster.routing.allocation.disk.threshold_enabled: true
|
|
cluster.routing.allocation.disk.watermark.flood_stage: 5gb # ES 6.x only
|
|
cluster.routing.allocation.disk.watermark.low: 15gb
|
|
cluster.routing.allocation.disk.watermark.high: 10gb
|
|
```
|
|
|
|
Restart Elasticsearch, and the `read_only_allow_delete` will clear on it's own.
|
|
|
|
_from "Disk-based Shard Allocation | Elasticsearch Reference" [5.6](https://www.elastic.co/guide/en/elasticsearch/reference/5.6/disk-allocator.html#disk-allocator) and [6.x](https://www.elastic.co/guide/en/elasticsearch/reference/6.x/disk-allocator.html)_
|