11 KiB
| stage | group | info |
|---|---|---|
| Enablement | Distribution | To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments |
Integrity check Rake task (FREE SELF)
GitLab provides Rake tasks to check the integrity of various components.
Repository integrity
Even though Git is very resilient and tries to prevent data integrity issues, there are times when things go wrong. The following Rake tasks intend to help GitLab administrators diagnose problem repositories so they can be fixed.
These Rake tasks use three different methods to determine the integrity of Git repositories.
- Git repository file system check (
git fsck). This step verifies the connectivity and validity of objects in the repository. - Check for
config.lockin the repository directory. - Check for any branch/references lock files in
refs/heads.
The existence of config.lock or reference locks
alone do not necessarily indicate a problem. Lock files are routinely created
and removed as Git and GitLab perform operations on the repository. They serve
to prevent data integrity issues. However, if a Git operation is interrupted these
locks may not be cleaned up properly.
The following symptoms may indicate a problem with repository integrity. If users experience these symptoms you may use the Rake tasks described below to determine exactly which repositories are causing the trouble.
- Receiving an error when trying to push code -
remote: error: cannot lock ref - A 500 error when viewing the GitLab dashboard or when accessing a specific project.
Check project code repositories
This task loops through the project code repositories and runs the integrity check described previously. If a project uses a pool repository, that is also checked. Other types of Git repositories are not checked.
Omnibus Installation
sudo gitlab-rake gitlab:git:fsck
Source Installation
sudo -u git -H bundle exec rake gitlab:git:fsck RAILS_ENV=production
Checksum of repository refs
One Git repository can be compared to another by checksumming all refs of each repository. If both repositories have the same refs, and if both repositories pass an integrity check, then we can be confident that both repositories are the same.
For example, this can be used to compare a backup of a repository against the source repository.
Check all GitLab repositories
This task loops through all repositories on the GitLab server and outputs
checksums in the format <PROJECT ID>,<CHECKSUM>.
- If a repository doesn't exist, the project ID is a blank checksum.
- If a repository exists but is empty, the output checksum is
0000000000000000000000000000000000000000. - Projects which don't exist are skipped.
Omnibus Installation
sudo gitlab-rake gitlab:git:checksum_projects
Source Installation
sudo -u git -H bundle exec rake gitlab:git:checksum_projects RAILS_ENV=production
For example, if:
- Project with ID#2 doesn't exist, it is skipped.
- Project with ID#4 doesn't have a repository, its checksum is blank.
- Project with ID#5 has an empty repository, its checksum is
0000000000000000000000000000000000000000.
The output would then look something like:
1,cfa3f06ba235c13df0bb28e079bcea62c5848af2
3,3f3fb58a8106230e3a6c6b48adc2712fb3b6ef87
4,
5,0000000000000000000000000000000000000000
6,6c6b48adc2712fb3b6ef87cfa3f06ba235c13df0
Check specific GitLab repositories
Optionally, specific project IDs can be checksummed by setting an environment
variable CHECKSUM_PROJECT_IDS with a list of comma-separated integers, for example:
sudo CHECKSUM_PROJECT_IDS="1,3" gitlab-rake gitlab:git:checksum_projects
Uploaded files integrity
Various types of files can be uploaded to a GitLab installation by users. These integrity checks can detect missing files. Additionally, for locally stored files, checksums are generated and stored in the database upon upload, and these checks verify them against current files.
Integrity checks are supported for the following types of file:
- CI artifacts (Available from version 10.7.0)
- LFS objects (Available from version 10.6.0)
- User uploads (Available from version 10.6.0)
Omnibus Installation
sudo gitlab-rake gitlab:artifacts:check
sudo gitlab-rake gitlab:lfs:check
sudo gitlab-rake gitlab:uploads:check
Source Installation
sudo -u git -H bundle exec rake gitlab:artifacts:check RAILS_ENV=production
sudo -u git -H bundle exec rake gitlab:lfs:check RAILS_ENV=production
sudo -u git -H bundle exec rake gitlab:uploads:check RAILS_ENV=production
These tasks also accept some environment variables which you can use to override certain values:
| Variable | Type | Description |
|---|---|---|
BATCH |
integer | Specifies the size of the batch. Defaults to 200. |
ID_FROM |
integer | Specifies the ID to start from, inclusive of the value. |
ID_TO |
integer | Specifies the ID value to end at, inclusive of the value. |
VERBOSE |
boolean | Causes failures to be listed individually, rather than being summarized. |
sudo gitlab-rake gitlab:artifacts:check BATCH=100 ID_FROM=50 ID_TO=250
sudo gitlab-rake gitlab:lfs:check BATCH=100 ID_FROM=50 ID_TO=250
sudo gitlab-rake gitlab:uploads:check BATCH=100 ID_FROM=50 ID_TO=250
Example output:
$ sudo gitlab-rake gitlab:uploads:check
Checking integrity of Uploads
- 1..1350: Failures: 0
- 1351..2743: Failures: 0
- 2745..4349: Failures: 2
- 4357..5762: Failures: 1
- 5764..7140: Failures: 2
- 7142..8651: Failures: 0
- 8653..10134: Failures: 0
- 10135..11773: Failures: 0
- 11777..13315: Failures: 0
Done!
Example verbose output:
$ sudo gitlab-rake gitlab:uploads:check VERBOSE=1
Checking integrity of Uploads
- 1..1350: Failures: 0
- 1351..2743: Failures: 0
- 2745..4349: Failures: 2
- Upload: 3573: #<Errno::ENOENT: No such file or directory @ rb_sysopen - /opt/gitlab/embedded/service/gitlab-rails/public/uploads/user-foo/project-bar/7a77cc52947bfe188adeff42f890bb77/image.png>
- Upload: 3580: #<Errno::ENOENT: No such file or directory @ rb_sysopen - /opt/gitlab/embedded/service/gitlab-rails/public/uploads/user-foo/project-bar/2840ba1ba3b2ecfa3478a7b161375f8a/pug.png>
- 4357..5762: Failures: 1
- Upload: 4636: #<Google::Apis::ServerError: Server error>
- 5764..7140: Failures: 2
- Upload: 5812: #<NoMethodError: undefined method `hashed_storage?' for nil:NilClass>
- Upload: 5837: #<NoMethodError: undefined method `hashed_storage?' for nil:NilClass>
- 7142..8651: Failures: 0
- 8653..10134: Failures: 0
- 10135..11773: Failures: 0
- 11777..13315: Failures: 0
Done!
LDAP check
The LDAP check Rake task tests the bind DN and password credentials
(if configured) and lists a sample of LDAP users. This task is also
executed as part of the gitlab:check task, but can run independently.
See LDAP Rake Tasks - LDAP Check for details.
Troubleshooting
The following are solutions to problems you might discover using the Rake tasks documented above.
Dangling objects
The gitlab-rake gitlab:git:fsck task can find dangling objects such as:
dangling blob a12...
dangling commit b34...
dangling tag c56...
dangling tree d78...
To delete them, try running housekeeping.
If the issue persists, try triggering garbage collection via the Rails Console:
p = Project.find_by_path("project-name")
Repositories::HousekeepingService.new(p, :gc).execute
If the dangling objects are younger than the 2 weeks default grace period, and you don't want to wait until they expire automatically, run:
Repositories::HousekeepingService.new(p, :prune).execute
Delete references to missing remote uploads
gitlab-rake gitlab:uploads:check VERBOSE=1 detects remote objects that do not exist because they were
deleted externally but their references still exist in the GitLab database.
Example output with error message:
$ sudo gitlab-rake gitlab:uploads:check VERBOSE=1
Checking integrity of Uploads
- 100..434: Failures: 2
- Upload: 100: Remote object does not exist
- Upload: 101: Remote object does not exist
Done!
To delete these references to remote uploads that were deleted externally, open the GitLab Rails Console and run:
uploads_deleted=0
Upload.find_each do |upload|
next if upload.retrieve_uploader.file.exists?
uploads_deleted=uploads_deleted + 1
p upload ### allow verification before destroy
# p upload.destroy! ### uncomment to actually destroy
end
p "#{uploads_deleted} remote objects were destroyed."
Delete references to missing artifacts
gitlab-rake gitlab:artifacts:check VERBOSE=1 detects when artifacts (or job.log files):
- Are deleted outside of GitLab.
- Have references still in the GitLab database.
When this scenario is detected, the Rake task displays an error message. For example:
Checking integrity of Job artifacts
- 3..8: Failures: 2
- Job artifact: 3: #<Errno::ENOENT: No such file or directory @ rb_sysopen - /var/opt/gitlab/gitlab-rails/shared/artifacts/4e/07/4e07408562bedb8b60ce05c1decfe3ad16b72230967de01f640b7e4729b49fce/2021_05_26/5/3/job.log>
- Job artifact: 8: #<Errno::ENOENT: No such file or directory @ rb_sysopen - /var/opt/gitlab/gitlab-rails/shared/artifacts/4e/07/4e07408562bedb8b60ce05c1decfe3ad16b72230967de01f640b7e4729b49fce/2021_05_26/6/8/job.log>
Done!
To delete these references to missing local artifacts (job.log files):
-
Open the GitLab Rails Console.
-
Run the following Ruby code:
artifacts_deleted = 0 ::Ci::JobArtifact.find_each do |artifact| ### Iterate artifacts # next if artifact.file.filename != "job.log" ### Uncomment if only `job.log` files' references are to be processed next if artifact.file.exists? ### Skip if the file reference is valid artifacts_deleted += 1 puts "#{artifact.id} #{artifact.file.path} is missing." ### Allow verification before destroy # artifact.destroy! ### Uncomment to actually destroy end puts "Count of identified/destroyed invalid references: #{artifacts_deleted}"
Delete references to missing LFS objects
If gitlab-rake gitlab:lfs:check VERBOSE=1 detects LFS objects that exist in the database
but not on disk, follow the procedure in the LFS documentation
to remove the database entries.