345 lines
17 KiB
Markdown
345 lines
17 KiB
Markdown
---
|
|
stage: Verify
|
|
group: Pipeline Execution
|
|
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments
|
|
type: reference
|
|
---
|
|
|
|
# Troubleshooting CI/CD **(FREE)**
|
|
|
|
GitLab provides several tools to help make troubleshooting your pipelines easier.
|
|
|
|
This guide also lists common issues and possible solutions.
|
|
|
|
## Verify syntax
|
|
|
|
An early source of problems can be incorrect syntax. The pipeline shows a `yaml invalid`
|
|
badge and does not start running if any syntax or formatting problems are found.
|
|
|
|
### Edit `gitlab-ci.yml` with the pipeline editor
|
|
|
|
The [pipeline editor](pipeline_editor/index.md) is the recommended editing
|
|
experience (rather than the single file editor or the Web IDE). It includes:
|
|
|
|
- Code completion suggestions that ensure you are only using accepted keywords.
|
|
- Automatic syntax highlighting and validation.
|
|
- The [CI/CD configuration visualization](pipeline_editor/index.md#visualize-ci-configuration),
|
|
a graphical representation of your `.gitlab-ci.yml` file.
|
|
|
|
If you prefer to use another editor, you can use a schema like [the Schemastore `gitlab-ci` schema](https://json.schemastore.org/gitlab-ci)
|
|
with your editor of choice.
|
|
|
|
### Verify syntax with CI Lint tool
|
|
|
|
The [CI Lint tool](lint.md) is a simple way to ensure the syntax of a CI/CD configuration
|
|
file is correct. Paste in full `.gitlab-ci.yml` files or individual jobs configuration,
|
|
to verify the basic syntax.
|
|
|
|
When a `.gitlab-ci.yml` file is present in a project, you can also use the CI Lint
|
|
tool to [simulate the creation of a full pipeline](lint.md#simulate-a-pipeline).
|
|
It does deeper verification of the configuration syntax.
|
|
|
|
## Verify variables
|
|
|
|
A key part of troubleshooting CI/CD is to verify which variables are present in a
|
|
pipeline, and what their values are. A lot of pipeline configuration is dependent
|
|
on variables, and verifying them is one of the fastest ways to find the source of
|
|
a problem.
|
|
|
|
[Export the full list of variables](variables/index.md#list-all-environment-variables)
|
|
available in each problematic job. Check if the variables you expect are present,
|
|
and check if their values are what you expect.
|
|
|
|
## GitLab CI/CD documentation
|
|
|
|
The [complete `.gitlab-ci.yml` reference](yaml/index.md) contains a full list of
|
|
every keyword you can use to configure your pipelines.
|
|
|
|
You can also look at a large number of pipeline configuration [examples](examples/index.md)
|
|
and [templates](examples/index.md#cicd-templates).
|
|
|
|
### Documentation for pipeline types
|
|
|
|
Some pipeline types have their own detailed usage guides that you should read
|
|
if you are using that type:
|
|
|
|
- [Multi-project pipelines](pipelines/multi_project_pipelines.md): Have your pipeline trigger
|
|
a pipeline in a different project.
|
|
- [Parent/child pipelines](pipelines/parent_child_pipelines.md): Have your main pipeline trigger
|
|
and run separate pipelines in the same project. You can also
|
|
[dynamically generate the child pipeline's configuration](pipelines/parent_child_pipelines.md#dynamic-child-pipelines)
|
|
at runtime.
|
|
- [Merge request pipelines](pipelines/merge_request_pipelines.md): Run a pipeline
|
|
in the context of a merge request.
|
|
- [Merged results pipelines](pipelines/merged_results_pipelines.md):
|
|
Merge request pipelines that run on the combined source and target branch
|
|
- [Merge trains](pipelines/merge_trains.md):
|
|
Multiple merged results pipelines that queue and run automatically before
|
|
changes are merged.
|
|
|
|
### Troubleshooting Guides for CI/CD features
|
|
|
|
Troubleshooting guides are available for some CI/CD features and related topics:
|
|
|
|
- [Container Registry](../user/packages/container_registry/index.md#troubleshooting-the-gitlab-container-registry)
|
|
- [GitLab Runner](https://docs.gitlab.com/runner/faq/)
|
|
- [Merge Trains](pipelines/merge_trains.md#troubleshooting)
|
|
- [Docker Build](docker/using_docker_build.md#troubleshooting)
|
|
- [Environments](environments/deployment_safety.md#ensure-only-one-deployment-job-runs-at-a-time)
|
|
|
|
## Common CI/CD issues
|
|
|
|
A lot of common pipeline issues can be fixed by analyzing the behavior of the `rules`
|
|
or `only/except` configuration. You shouldn't use these two configurations in the same
|
|
pipeline, as they behave differently. It's hard to predict how a pipeline runs with
|
|
this mixed behavior.
|
|
|
|
If your `rules` or `only/except` configuration makes use of [predefined variables](variables/predefined_variables.md)
|
|
like `CI_PIPELINE_SOURCE`, `CI_MERGE_REQUEST_ID`, you should [verify them](#verify-variables)
|
|
as the first troubleshooting step.
|
|
|
|
### Jobs or pipelines don't run when expected
|
|
|
|
The `rules` or `only/except` keywords are what determine whether or not a job is
|
|
added to a pipeline. If a pipeline runs, but a job is not added to the pipeline,
|
|
it's usually due to `rules` or `only/except` configuration issues.
|
|
|
|
If a pipeline does not seem to run at all, with no error message, it may also be
|
|
due to `rules` or `only/except` configuration, or the `workflow: rules` keyword.
|
|
|
|
If you are converting from `only/except` to the `rules` keyword, you should check
|
|
the [`rules` configuration details](yaml/index.md#rules) carefully. The behavior
|
|
of `only/except` and `rules` is different and can cause unexpected behavior when migrating
|
|
between the two.
|
|
|
|
The [common `if` clauses for `rules`](jobs/job_control.md#common-if-clauses-for-rules)
|
|
can be very helpful for examples of how to write rules that behave the way you expect.
|
|
|
|
#### Two pipelines run at the same time
|
|
|
|
Two pipelines can run when pushing a commit to a branch that has an open merge request
|
|
associated with it. Usually one pipeline is a merge request pipeline, and the other
|
|
is a branch pipeline.
|
|
|
|
This situation is usually caused by the `rules` configuration, and there are several ways to
|
|
[prevent duplicate pipelines](jobs/job_control.md#avoid-duplicate-pipelines).
|
|
|
|
#### A job is not in the pipeline
|
|
|
|
GitLab determines if a job is added to a pipeline based on the [`only/except`](yaml/index.md#only--except)
|
|
or [`rules`](yaml/index.md#rules) defined for the job. If it didn't run, it's probably
|
|
not evaluating as you expect.
|
|
|
|
#### No pipeline or the wrong type of pipeline runs
|
|
|
|
Before a pipeline can run, GitLab evaluates all the jobs in the configuration and tries
|
|
to add them to all available pipeline types. A pipeline does not run if no jobs are added
|
|
to it at the end of the evaluation.
|
|
|
|
If a pipeline did not run, it's likely that all the jobs had `rules` or `only/except` that
|
|
blocked them from being added to the pipeline.
|
|
|
|
If the wrong pipeline type ran, then the `rules` or `only/except` configuration should
|
|
be checked to make sure the jobs are added to the correct pipeline type. For
|
|
example, if a merge request pipeline did not run, the jobs may have been added to
|
|
a branch pipeline instead.
|
|
|
|
It's also possible that your [`workflow: rules`](yaml/index.md#workflow) configuration
|
|
blocked the pipeline, or allowed the wrong pipeline type.
|
|
|
|
### A job runs unexpectedly
|
|
|
|
A common reason a job is added to a pipeline unexpectedly is because the `changes`
|
|
keyword always evaluates to true in certain cases. For example, `changes` is always
|
|
true in certain pipeline types, including scheduled pipelines and pipelines for tags.
|
|
|
|
The `changes` keyword is used in combination with [`only/except`](yaml/index.md#onlychanges--exceptchanges)
|
|
or [`rules`](yaml/index.md#ruleschanges)). It's recommended to use `changes` with
|
|
`rules` or `only/except` configuration that ensures the job is only added to branch
|
|
pipelines or merge request pipelines.
|
|
|
|
### "fatal: reference is not a tree" error
|
|
|
|
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/17043) in GitLab 12.4.
|
|
|
|
Previously, you'd have encountered unexpected pipeline failures when you force-pushed
|
|
a branch to its remote repository. To illustrate the problem, suppose you've had the current workflow:
|
|
|
|
1. A user creates a feature branch named `example` and pushes it to a remote repository.
|
|
1. A new pipeline starts running on the `example` branch.
|
|
1. A user rebases the `example` branch on the latest default branch and force-pushes it to its remote repository.
|
|
1. A new pipeline starts running on the `example` branch again, however,
|
|
the previous pipeline (2) fails because of `fatal: reference is not a tree:` error.
|
|
|
|
This occurs because the previous pipeline cannot find a checkout-SHA (which is associated with the pipeline record)
|
|
from the `example` branch that the commit history has already been overwritten by the force-push.
|
|
Similarly, [Merged results pipelines](pipelines/merged_results_pipelines.md)
|
|
might have failed intermittently due to [the same reason](pipelines/merged_results_pipelines.md#pipelines-fail-intermittently-with-a-fatal-reference-is-not-a-tree-error).
|
|
|
|
As of GitLab 12.4, we've improved this behavior by persisting pipeline refs exclusively.
|
|
To illustrate its life cycle:
|
|
|
|
1. A pipeline is created on a feature branch named `example`.
|
|
1. A persistent pipeline ref is created at `refs/pipelines/<pipeline-id>`,
|
|
which retains the checkout-SHA of the associated pipeline record.
|
|
This persistent ref stays intact during the pipeline execution,
|
|
even if the commit history of the `example` branch has been overwritten by force-push.
|
|
1. The runner fetches the persistent pipeline ref and gets source code from the checkout-SHA.
|
|
1. When the pipeline finishes, its persistent ref is cleaned up in a background process.
|
|
|
|
### Merge request pipeline messages
|
|
|
|
The merge request pipeline widget shows information about the pipeline status in
|
|
a merge request. It's displayed above the [ability to merge status widget](#merge-request-status-messages).
|
|
|
|
#### "Checking ability to merge automatically" message
|
|
|
|
There is a [known issue](https://gitlab.com/gitlab-org/gitlab/-/issues/229352)
|
|
where a merge request can be stuck with the `Checking ability to merge automatically`
|
|
message.
|
|
|
|
If your merge request has this message and it does not disappear after a few minutes,
|
|
you can try one of these workarounds:
|
|
|
|
- Refresh the merge request page.
|
|
- Close & Re-open the merge request.
|
|
- Rebase the merge request with the `/rebase` [quick action](../user/project/quick_actions.md).
|
|
- If you have already confirmed the merge request is ready to be merged, you can merge
|
|
it with the `/merge` quick action.
|
|
|
|
#### "Checking pipeline status" message
|
|
|
|
This message is shown when the merge request has no pipeline associated with the
|
|
latest commit yet. This might be because:
|
|
|
|
- GitLab hasn't finished creating the pipeline yet.
|
|
- You are using an external CI service and GitLab hasn't heard back from the service yet.
|
|
- You are not using CI/CD pipelines in your project.
|
|
- You are using CI/CD pipelines in your project, but your configuration prevented a pipeline from running on the source branch for your merge request.
|
|
- The latest pipeline was deleted (this is a [known issue](https://gitlab.com/gitlab-org/gitlab/-/issues/214323)).
|
|
- The source branch of the merge request is on a private fork.
|
|
|
|
After the pipeline is created, the message updates with the pipeline status.
|
|
|
|
### Merge request status messages
|
|
|
|
The merge request status widget shows the **Merge** button and whether or not a merge
|
|
request is ready to merge. If the merge request can't be merged, the reason for this
|
|
is displayed.
|
|
|
|
If the pipeline is still running, the **Merge** button is replaced with the
|
|
**Merge when pipeline succeeds** button.
|
|
|
|
If [**Merge Trains**](pipelines/merge_trains.md)
|
|
are enabled, the button is either **Add to merge train** or **Add to merge train when pipeline succeeds**. **(PREMIUM)**
|
|
|
|
#### "A CI/CD pipeline must run and be successful before merge" message
|
|
|
|
This message is shown if the [Pipelines must succeed](../user/project/merge_requests/merge_when_pipeline_succeeds.md#only-allow-merge-requests-to-be-merged-if-the-pipeline-succeeds)
|
|
setting is enabled in the project and a pipeline has not yet run successfully.
|
|
This also applies if the pipeline has not been created yet, or if you are waiting
|
|
for an external CI service. If you don't use pipelines for your project, then you
|
|
should disable **Pipelines must succeed** so you can accept merge requests.
|
|
|
|
#### "Merge blocked: pipeline must succeed. Push a new commit that fixes the failure" message
|
|
|
|
This message is shown if the [merge request pipeline](pipelines/merge_request_pipelines.md),
|
|
[merged results pipeline](pipelines/merged_results_pipelines.md),
|
|
or [merge train pipeline](pipelines/merge_trains.md)
|
|
has failed or been canceled.
|
|
|
|
If a merge request pipeline or merged result pipeline was canceled or failed, you can:
|
|
|
|
- Re-run the entire pipeline by clicking **Run pipeline** in the pipeline tab in the merge request.
|
|
- [Retry only the jobs that failed](pipelines/index.md#view-pipelines). If you re-run the entire pipeline, this is not necessary.
|
|
- Push a new commit to fix the failure.
|
|
|
|
If the merge train pipeline has failed, you can:
|
|
|
|
- Check the failure and determine if you can use the [`/merge` quick action](../user/project/quick_actions.md) to immediately add the merge request to the train again.
|
|
- Re-run the entire pipeline by clicking **Run pipeline** in the pipeline tab in the merge request, then add the merge request to the train again.
|
|
- Push a commit to fix the failure, then add the merge request to the train again.
|
|
|
|
If the merge train pipeline was canceled before the merge request was merged, without a failure, you can:
|
|
|
|
- Add it to the train again.
|
|
|
|
### Project `group/project` not found or access denied
|
|
|
|
This message is shown if configuration is added with [`include`](yaml/index.md#include) and one of the following:
|
|
|
|
- The configuration refers to a project that can't be found.
|
|
- The user that is running the pipeline is unable to access any included projects.
|
|
|
|
To resolve this, check that:
|
|
|
|
- The path of the project is in the format `my-group/my-project` and does not include
|
|
any folders in the repository.
|
|
- The user running the pipeline is a [member of the projects](../user/project/members/index.md#add-users-to-a-project)
|
|
that contain the included files. Users must also have the [permission](../user/permissions.md#job-permissions)
|
|
to run CI/CD jobs in the same projects.
|
|
|
|
### "The parsed YAML is too big" message
|
|
|
|
This message displays when the YAML configuration is too large or nested too deeply.
|
|
YAML files with a large number of includes, and thousands of lines overall, are
|
|
more likely to hit this memory limit. For example, a YAML file that is 200kb is
|
|
likely to hit the default memory limit.
|
|
|
|
To reduce the configuration size, you can:
|
|
|
|
- Check the length of the expanded CI/CD configuration in the pipeline editor's
|
|
[merged YAML](pipeline_editor/index.md#view-expanded-configuration) tab. Look for
|
|
duplicated configuration that can be removed or simplified.
|
|
- Move long or repeated `script` sections into standalone scripts in the project.
|
|
- Use [parent and child pipelines](pipelines/parent_child_pipelines.md) to move some
|
|
work to jobs in an independent child pipeline.
|
|
|
|
On a self-managed instance, you can [increase the size limits](../administration/instance_limits.md#maximum-size-and-depth-of-cicd-configuration-yaml-files).
|
|
|
|
## Pipeline warnings
|
|
|
|
Pipeline configuration warnings are shown when you:
|
|
|
|
- [Validate configuration with the CI Lint tool](yaml/index.md).
|
|
- [Manually run a pipeline](pipelines/index.md#run-a-pipeline-manually).
|
|
|
|
### "Job may allow multiple pipelines to run for a single action" warning
|
|
|
|
When you use [`rules`](yaml/index.md#rules) with a `when` clause without an `if`
|
|
clause, multiple pipelines may run. Usually this occurs when you push a commit to
|
|
a branch that has an open merge request associated with it.
|
|
|
|
To [prevent duplicate pipelines](jobs/job_control.md#avoid-duplicate-pipelines), use
|
|
[`workflow: rules`](yaml/index.md#workflow) or rewrite your rules to control
|
|
which pipelines can run.
|
|
|
|
### Console workaround if job using resource_group gets stuck **(FREE SELF)**
|
|
|
|
```ruby
|
|
# find resource group by name
|
|
resource_group = Project.find_by_full_path('...').resource_groups.find_by(key: 'the-group-name')
|
|
busy_resources = resource_group.resources.where('build_id IS NOT NULL')
|
|
|
|
# identify which builds are occupying the resource
|
|
# (I think it should be 1 as of today)
|
|
busy_resources.pluck(:build_id)
|
|
|
|
# it's good to check why this build is holding the resource.
|
|
# Is it stuck? Has it been forcefully dropped by the system?
|
|
# free up busy resources
|
|
busy_resources.update_all(build_id: nil)
|
|
```
|
|
|
|
### Job log slow to update
|
|
|
|
When you visit the job log page for a running job, there could be a delay of up to
|
|
60 seconds before the log updates. The default refresh time is 60 seconds, but after
|
|
the log is viewed in the UI, the following log updates should occur every 3 seconds.
|
|
|
|
## How to get help
|
|
|
|
If you are unable to resolve pipeline issues, you can get help from:
|
|
|
|
- The [GitLab community forum](https://forum.gitlab.com/)
|
|
- GitLab [Support](https://about.gitlab.com/support/)
|