gitlab-org--gitlab-foss/doc/development/internal_api.md

stage	group	info	type
Create	Source Code	To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#designated-technical-writers	reference, api

Internal API

The internal API is used by different GitLab components, it can not be used by other consumers. This documentation is intended for people working on the GitLab codebase.

This documentation does not yet include the internal API used by GitLab Pages.

Authentication

These methods are all authenticated using a shared secret. This secret is stored in a file at the path configured in config/gitlab.yml by default this is in the root of the rails app named .gitlab_shell_secret

To authenticate using that token, clients read the contents of that file, and include the token Base64 encoded in a secret_token parameter or in the Gitlab-Shared-Secret header.

NOTE: Note: The internal API used by GitLab Pages, and GitLab Kubernetes Agent Server (kas) uses JSON Web Token (JWT) authentication, which is different from GitLab Shell.

Git Authentication

This is called by Gitaly and GitLab Shell to check access to a repository.

When called from GitLab Shell no changes are passed and the internal API replies with the information needed to pass the request on to Gitaly.

When called from Gitaly in a pre-receive hook the changes are passed and those are validated to determine if the push is allowed.

POST /internal/allowed

Attribute	Type	Required	Description
key_id	string	no	ID of the SSH-key used to connect to GitLab Shell
username	string	no	Username from the certificate used to connect to GitLab Shell
project	string	no (if gl_repository is passed)	Path to the project
gl_repository	string	no (if project is passed)	Repository identifier (e.g. project-7)
protocol	string	yes	SSH when called from GitLab Shell, HTTP or SSH when called from Gitaly
action	string	yes	Git command being run (git-upload-pack, git-receive-pack, git-upload-archive)
changes	string	yes	<oldrev> <newrev> <refname> when called from Gitaly, the magic string _any when called from GitLab Shell
check_ip	string	no	IP address from which call to GitLab Shell was made

Example request:

curl --request POST --header "Gitlab-Shared-Secret: <Base64 encoded token>" --data "key_id=11&project=gnuwget/wget2&action=git-upload-pack&protocol=ssh" http://localhost:3001/api/v4/internal/allowed

Example response:

{
  "status": true,
  "gl_repository": "project-3",
  "gl_project_path": "gnuwget/wget2",
  "gl_id": "user-1",
  "gl_username": "root",
  "git_config_options": [],
  "gitaly": {
    "repository": {
      "storage_name": "default",
      "relative_path": "@hashed/4e/07/4e07408562bedb8b60ce05c1decfe3ad16b72230967de01f640b7e4729b49fce.git",
      "git_object_directory": "",
      "git_alternate_object_directories": [],
      "gl_repository": "project-3",
      "gl_project_path": "gnuwget/wget2"
    },
    "address": "unix:/Users/bvl/repos/gitlab/gitaly.socket",
    "token": null
  },
  "gl_console_messages": []
}

Known consumers

• Gitaly
• GitLab Shell

LFS Authentication

This is the endpoint that gets called from GitLab Shell to provide information for LFS clients when the repository is accessed over SSH.

Attribute	Type	Required	Description
key_id	string	no	ID of the SSH-key used to connect to GitLab Shell
username	string	no	Username from the certificate used to connect to GitLab Shell
project	string	no	Path to the project

Example request:

curl --request POST --header "Gitlab-Shared-Secret: <Base64 encoded token>" --data "key_id=11&project=gnuwget/wget2" http://localhost:3001/api/v4/internal/lfs_authenticate

{
  "username": "root",
  "lfs_token": "eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJkYXRhIjp7ImFjdG9yIjoicm9vdCJ9LCJqdGkiOiIyYWJhZDcxZC0xNDFlLTQ2NGUtOTZlMi1mODllYWRiMGVmZTYiLCJpYXQiOjE1NzAxMTc2NzYsIm5iZiI6MTU3MDExNzY3MSwiZXhwIjoxNTcwMTE5NDc2fQ.g7atlBw1QMY7QEBVPE0LZ8ZlKtaRzaMRmNn41r2YITM",
  "repository_http_path": "http://localhost:3001/gnuwget/wget2.git",
  "expires_in": 1800
}

Known consumers

• GitLab Shell

Authorized Keys Check

This endpoint is called by the GitLab Shell authorized keys check. Which is called by OpenSSH for fast SSH key lookup.

Attribute	Type	Required	Description
key	string	yes	SSH key as passed by OpenSSH to GitLab Shell

GET /internal/authorized_keys

Example request:

curl --request GET --header "Gitlab-Shared-Secret: <Base64 encoded secret>""http://localhost:3001/api/v4/internal/authorized_keys?key=<key as passed by OpenSSH>"

Example response:

{
  "id": 11,
  "title": "admin@example.com",
  "key": "ssh-rsa ...",
  "created_at": "2019-06-27T15:29:02.219Z"
}

Known consumers

• GitLab Shell

Get user for user ID or key

This endpoint is used when a user performs ssh git@gitlab.com. It discovers the user associated with an SSH key.

Attribute	Type	Required	Description
key_id	integer	no	The ID of the SSH key used as found in the authorized-keys file or through the /authorized_keys check
username	string	no	Username of the user being looked up, used by GitLab Shell when authenticating using a certificate

GET /internal/discover

Example request:

curl --request GET --header "Gitlab-Shared-Secret: <Base64 encoded secret>" "http://localhost:3001/api/v4/internal/discover?key_id=7"

Example response:

{
  "id": 7,
  "name": "Dede Eichmann",
  "username": "rubi"
}

Known consumers

• GitLab Shell

Instance information

This gets some generic information about the instance. This is used by Geo nodes to get information about each other.

GET /internal/check

Example request:

curl --request GET --header "Gitlab-Shared-Secret: <Base64 encoded secret>" "http://localhost:3001/api/v4/internal/check"

Example response:

{
  "api_version": "v4",
  "gitlab_version": "12.3.0-pre",
  "gitlab_rev": "d69c988e6a6",
  "redis": true
}

Known consumers

• GitLab Geo
• GitLab Shell's bin/check
• Gitaly

Get new 2FA recovery codes using an SSH key

This is called from GitLab Shell and allows users to get new 2FA recovery codes based on their SSH key.

Attribute	Type	Required	Description
key_id	integer	no	The ID of the SSH key used as found in the authorized-keys file or through the /authorized_keys check
user_id	integer	no	Deprecated User_id for which to generate new recovery codes

GET /internal/two_factor_recovery_codes

Example request:

curl --request POST --header "Gitlab-Shared-Secret: <Base64 encoded secret>" --data "key_id=7" http://localhost:3001/api/v4/internal/two_factor_recovery_codes

Example response:

{
  "success": true,
  "recovery_codes": [
    "d93ee7037944afd5",
    "19d7b84862de93dd",
    "1e8c52169195bf71",
    "be50444dddb7ca84",
    "26048c77d161d5b7",
    "482d5c03d1628c47",
    "d2c695e309ce7679",
    "dfb4748afc4f12a7",
    "0e5f53d1399d7979",
    "af04d5622153b020"
  ]
}

Known consumers

• GitLab Shell

Get new personal access-token

This is called from GitLab Shell and allows users to generate a new personal access token.

Attribute	Type	Required	Description
name	string	yes	The name of the new token
scopes	string array	yes	The authorization scopes for the new token, these must be valid token scopes
expires_at	string	no	The expiry date for the new token
key_id	integer	no	The ID of the SSH key used as found in the authorized-keys file or through the /authorized_keys check
user_id	integer	no	User_id for which to generate the new token

POST /internal/personal_access_token

Example request:

curl --request POST --header "Gitlab-Shared-Secret: <Base64 encoded secret>" --data "user_id=29&name=mytokenname&scopes[]=read_user&scopes[]=read_repository&expires_at=2020-07-24" http://localhost:3001/api/v4/internal/personal_access_token

Example response:

{
  "success": true,
  "token": "Hf_79B288hRv_3-TSD1R",
  "scopes": ["read_user","read_repository"],
  "expires_at": "2020-07-24"
}

Known consumers

• GitLab Shell

Incrementing counter on pre-receive

This is called from the Gitaly hooks increasing the reference counter for a push that might be accepted.

Attribute	Type	Required	Description
gl_repository	string	yes	repository identifier for the repository receiving the push

POST /internal/pre_receive

Example request:

curl --request POST --header "Gitlab-Shared-Secret: <Base64 encoded secret>" --data "gl_repository=project-7" http://localhost:3001/api/v4/internal/pre_receive

Example response:

{
  "reference_counter_increased": true
}

PostReceive

Called from Gitaly after a receiving a push. This triggers the PostReceive-worker in Sidekiq, processes the passed push options and builds the response including messages that need to be displayed to the user.

Attribute	Type	Required	Description
identifier	string	yes	user-[id] or key-[id] Identifying the user performing the push
gl_repository	string	yes	identifier of the repository being pushed to
push_options	string array	no	array of push options
changes	string	no	refs to be updated in the push in the format oldrev newrev refname\n.

POST /internal/post_receive

Example Request:

curl --request POST --header "Gitlab-Shared-Secret: <Base64 encoded secret>" --data "gl_repository=project-7" --data "identifier=user-1" --data "changes=0000000000000000000000000000000000000000 fd9e76b9136bdd9fe217061b497745792fe5a5ee gh-pages\n"  http://localhost:3001/api/v4/internal/post_receive

Example response:

{
  "messages": [
    {
      "message": "Hello from post-receive",
      "type": "alert"
    }
  ],
  "reference_counter_decreased": true
}

Kubernetes agent endpoints

• Introduced in GitLab 13.4.
• This feature is not deployed on GitLab.com
• It's not recommended for production use.

The following endpoints are used by the GitLab Kubernetes Agent Server (kas) for various purposes.

These endpoints are all authenticated using JWT. The JWT secret is stored in a file specified in config/gitlab.yml. By default, the location is in the root of the GitLab Rails app in a file called .gitlab_kas_secret.

CAUTION: Caution: The Kubernetes agent is under development and is not recommended for production use.

Kubernetes agent information

Called from GitLab Kubernetes Agent Server (kas) to retrieve agent information for the given agent token. This returns the Gitaly connection information for the agent's project in order for kas to fetch and update the agent's configuration.

GET /internal/kubernetes/agent_info

Example Request:

curl --request GET --header "Gitlab-Kas-Api-Request: <JWT token>" --header "Authorization: Bearer <agent token>" "http://localhost:3000/api/v4/internal/kubernetes/agent_info"

Kubernetes agent project information

Called from GitLab Kubernetes Agent Server (kas) to retrieve project information for the given agent token. This returns the Gitaly connection for the requested project. GitLab kas uses this to configure the agent to fetch Kubernetes resources from the project repository to sync.

Only public projects are currently supported. For private projects, the ability for the agent to be authorized is not yet implemented.

Attribute	Type	Required	Description
id	integer/string	yes	The ID or URL-encoded path of the project

GET /internal/kubernetes/project_info

Example Request:

curl --request GET --header "Gitlab-Kas-Api-Request: <JWT token>" --header "Authorization: Bearer <agent token>" "http://localhost:3000/api/v4/internal/kubernetes/project_info?id=7"

Kubernetes agent usage metrics

Called from GitLab Kubernetes Agent Server (kas) to increase the usage metric counters.

Attribute	Type	Required	Description
gitops_sync_count	integer	yes	The number to increase the gitops_sync_count counter by

POST /internal/kubernetes/usage_metrics

Example Request:

curl --request POST --header "Gitlab-Kas-Api-Request: <JWT token>" --header "Content-Type: application/json" --data '{"gitops_sync_count":1}' "http://localhost:3000/api/v4/internal/kubernetes/usage_metrics"