7.3 KiB
Configuring GitLab for HA
Assuming you have already configured a database, Redis, and NFS, you can configure the GitLab application server(s) now. Complete the steps below for each GitLab application server in your environment.
Note: There is some additional configuration near the bottom for additional GitLab application servers. It's important to read and understand these additional steps before proceeding with GitLab installation.
-
If necessary, install the NFS client utility packages using the following commands:
# Ubuntu/Debian apt-get install nfs-common # CentOS/Red Hat yum install nfs-utils nfs-utils-lib
-
Specify the necessary NFS shares. Mounts are specified in
/etc/fstab
. The exact contents of/etc/fstab
will depend on how you chose to configure your NFS server. See NFS documentation for the various options. Here is an example snippet to add to/etc/fstab
:10.1.0.1:/var/opt/gitlab/.ssh /var/opt/gitlab/.ssh nfs4 defaults,soft,rsize=1048576,wsize=1048576,noatime,nofail,lookupcache=positive 0 2 10.1.0.1:/var/opt/gitlab/gitlab-rails/uploads /var/opt/gitlab/gitlab-rails/uploads nfs4 defaults,soft,rsize=1048576,wsize=1048576,noatime,nofail,lookupcache=positive 0 2 10.1.0.1:/var/opt/gitlab/gitlab-rails/shared /var/opt/gitlab/gitlab-rails/shared nfs4 defaults,soft,rsize=1048576,wsize=1048576,noatime,nofail,lookupcache=positive 0 2 10.1.0.1:/var/opt/gitlab/gitlab-ci/builds /var/opt/gitlab/gitlab-ci/builds nfs4 defaults,soft,rsize=1048576,wsize=1048576,noatime,nofail,lookupcache=positive 0 2 10.1.0.1:/var/opt/gitlab/git-data /var/opt/gitlab/git-data nfs4 defaults,soft,rsize=1048576,wsize=1048576,noatime,nofail,lookupcache=positive 0 2
-
Create the shared directories. These may be different depending on your NFS mount locations.
mkdir -p /var/opt/gitlab/.ssh /var/opt/gitlab/gitlab-rails/uploads /var/opt/gitlab/gitlab-rails/shared /var/opt/gitlab/gitlab-ci/builds /var/opt/gitlab/git-data
-
Download/install GitLab Omnibus using steps 1 and 2 from GitLab downloads. Do not complete other steps on the download page.
-
Create/edit
/etc/gitlab/gitlab.rb
and use the following configuration. Be sure to change theexternal_url
to match your eventual GitLab front-end URL. Depending your the NFS configuration, you may need to change some GitLab data locations. See NFS documentation for/etc/gitlab/gitlab.rb
configuration values for various scenarios. The example below assumes you've added NFS mounts in the default data locations. Additionally the UID and GIDs given are just examples and you should configure with your preferred values.external_url 'https://gitlab.example.com' # Prevent GitLab from starting if NFS data mounts are not available high_availability['mountpoint'] = '/var/opt/gitlab/git-data' # Disable components that will not be on the GitLab application server roles ['application_role'] nginx['enable'] = true # PostgreSQL connection details gitlab_rails['db_adapter'] = 'postgresql' gitlab_rails['db_encoding'] = 'unicode' gitlab_rails['db_host'] = '10.1.0.5' # IP/hostname of database server gitlab_rails['db_password'] = 'DB password' # Redis connection details gitlab_rails['redis_port'] = '6379' gitlab_rails['redis_host'] = '10.1.0.6' # IP/hostname of Redis server gitlab_rails['redis_password'] = 'Redis Password' # Ensure UIDs and GIDs match between servers for permissions via NFS user['uid'] = 9000 user['gid'] = 9000 web_server['uid'] = 9001 web_server['gid'] = 9001 registry['uid'] = 9002 registry['gid'] = 9002
Note: To maintain uniformity of links across HA clusters, the
external_url
on the first application server as well as the additional application servers should point to the external url that users will use to access GitLab. In a typical HA setup, this will be the url of the load balancer which will route traffic to all GitLab application servers in the HA cluster.Note: When you specify
https
in theexternal_url
, as in the example above, GitLab assumes you have SSL certificates in/etc/gitlab/ssl/
. If certificates are not present, Nginx will fail to start. See Nginx documentation for more information.Note: It is best to set the
uid
andgid
s prior to the initial reconfigure of GitLab. Omnibus will not recursivelychown
directories if set after the initial reconfigure.
First GitLab application server
As a final step, run the setup rake task only on the first GitLab application server. Do not run this on additional application servers.
- Initialize the database by running
sudo gitlab-rake gitlab:setup
. - Run
sudo gitlab-ctl reconfigure
to compile the configuration.
WARNING: Only run this setup task on NEW GitLab instances because it will wipe any existing data.
Extra configuration for additional GitLab application servers
Additional GitLab servers (servers configured after the first GitLab server) need some extra configuration.
-
Configure shared secrets. These values can be obtained from the primary GitLab server in
/etc/gitlab/gitlab-secrets.json
. Copy this file to the secondary servers prior to running the firstreconfigure
in the steps above.gitlab_shell['secret_token'] = 'fbfb19c355066a9afb030992231c4a363357f77345edd0f2e772359e5be59b02538e1fa6cae8f93f7d23355341cea2b93600dab6d6c3edcdced558fc6d739860' gitlab_rails['otp_key_base'] = 'b719fe119132c7810908bba18315259ed12888d4f5ee5430c42a776d840a396799b0a5ef0a801348c8a357f07aa72bbd58e25a84b8f247a25c72f539c7a6c5fa' gitlab_rails['secret_key_base'] = '6e657410d57c71b4fc3ed0d694e7842b1895a8b401d812c17fe61caf95b48a6d703cb53c112bc01ebd197a85da81b18e29682040e99b4f26594772a4a2c98c6d' gitlab_rails['db_key_base'] = 'bf2e47b68d6cafaef1d767e628b619365becf27571e10f196f98dc85e7771042b9203199d39aff91fcb6837c8ed83f2a912b278da50999bb11a2fbc0fba52964'
-
Run
touch /etc/gitlab/skip-auto-reconfigure
to prevent database migrations from running on upgrade. Only the primary GitLab application server should handle migrations. -
Optional Configure host keys. Copy all contents(primary and public keys) inside
/etc/ssh/
on the primary application server to/etc/ssh
on all secondary servers. This prevents false man-in-the-middle-attack alerts when accessing servers in your High Availability cluster behind a load balancer. -
Run
sudo gitlab-ctl reconfigure
to compile the configuration.
Troubleshooting
mount: wrong fs type, bad option, bad superblock on
You have not installed the necessary NFS client utilities. See step 1 above.
mount: mount point /var/opt/gitlab/... does not exist
This particular directory does not exist on the NFS server. Ensure the share is exported and exists on the NFS server and try to remount.
Read more on high-availability configuration: