gitlab-org--gitlab-foss/doc/development/integrations/secure.md

20 KiB

Security scanner integration

Integrating a security scanner into GitLab consists of providing end users with a CI job definition they can add to their CI configuration files, to scan their GitLab projects. The scanning job is usually based on a Docker image that contains the scanner and all its dependencies in a self-contained environment. This page documents requirements and guidelines for writing CI jobs implementing a security scanner, as well as requirements and guidelines for the Docker image itself.

Job definition

Name

For consistency, scanning jobs should be named after the scanner, in lower case. The job name is suffixed after the type of scanning: _dependency_scanning, _container_scanning, _dast, and _sast. For instance, the dependency scanning job based on the "MySec" scanner would be named mysec_dependency_scanning.

Image

The image keyword is used to specify the Docker image containing the security scanner.

Script

The script keyword is used to specify the command that the job runs. Because the script cannot be left empty, it must be set to the command that performs the scan. It is not possible to rely on the predefined ENTRYPOINT and CMD of the Docker image to perform the scan automatically, without passing any command.

The before_script should not be used in the job definition because users may rely on this to prepare their projects before performing the scan. For instance, it is common practice to use before_script to install system libraries a particular project needs before performing SAST or Dependency Scanning.

Similarly, after_script should not not be used in the job definition, because it may be overridden by users.

Stage

For consistency, scanning jobs should belong to the test stage when possible. The stage keyword can be omitted because test is the default value.

Fail-safe

To be aligned with the GitLab Security paradigm, scanning jobs should not block the pipeline when they fail, so the allow_failure parameter should be set to true.

Artifacts

Scanning jobs must declare a report that corresponds to the type of scanning they perform, using the artifacts:reports keyword. Valid reports are: dependency_scanning, container_scanning, dast, and sast.

For example, here is the definition of a SAST job that generates a file named gl-sast-report.json, and uploads it as a SAST report:

mysec_dependency_scanning:
  image: registry.gitlab.com/secure/mysec
  artifacts:
    reports:
      sast: gl-sast-report.json

gl-sast-report.json is an example file path. See the Output file section for more details. It is processed as a SAST report because it is declared as such in the job definition.

Rules

Scanning jobs should be skipped unless the corresponding feature is listed in the GITLAB_FEATURES variable (comma-separated list of values). So Dependency Scanning, Container Scanning, SAST, and DAST should be skipped unless GITLAB_FEATURES contains dependency_scanning, container_scanning, sast, and dast, respectively. See GitLab CI/CD predefined variables.

Also, scanning jobs should be skipped when the corresponding variable prefixed with _DISABLED is present. See DEPENDENCY_SCANNING_DISABLED, CONTAINER_SCANNING_DISABLED, SAST_DISABLED, and DAST_DISABLED in Auto DevOps documentation.

Finally, SAST and Dependency Scanning job definitions should use CI_PROJECT_REPOSITORY_LANGUAGES (comma-separated list of values) in order to skip the job when the language or technology is not supported. Language detection currently relies on the linguist Ruby gem. See GitLab CI/CD prefined variables.

For instance, here is how to skip the Dependency Scanning job mysec_dependency_scanning unless the project repository contains Java source code, and the dependency_scanning feature is enabled:

mysec_dependency_scanning:
  except:
    variables:
      - $DEPENDENCY_SCANNING_DISABLED
  only:
    variables:
      - $GITLAB_FEATURES =~ /\bdependency_scanning\b/ &&
        $CI_PROJECT_REPOSITORY_LANGUAGES =~ /\bjava\b/

The only/except keywords as well as the new rules keyword make possible to trigger the job depending on the branch, or when some particular file changes. Such rules should be defined by users based on their needs, and should not be predefined in the job definition of the scanner.

Docker image

The Docker image is a self-contained environment that combines the scanner with all the libraries and tools it depends on.

Image size

Depending on the CI infrastructure, the CI may have to fetch the Docker image every time the job runs. To make the scanning job run fast, and to avoid wasting bandwidth, it is important to make Docker images as small as possible, ideally smaller than 50 MB.

If the scanner requires a fully functional Linux environment, it is recommended to use a Debian "slim" distribution or Alpine Linux. If possible, it is recommended to build the image from scratch, using the FROM scratch instruction, and to compile the scanner with all the libraries it needs. Multi-stage builds might also help with keeping the image small.

Image tag

As documented in the Docker Official Images project, it is strongly encouraged that version number tags be given aliases which allows the user to easily refer to the "most recent" release of a particular series. See also Docker Tagging: Best practices for tagging and versioning docker images.

Command line

A scanner is a command line tool that takes environment variables as inputs, and generates a file that is uploaded as a report (based on the job definition). It also generates text output on the standard output and standard error streams, and exits with a status code.

Variables

All CI variables are passed to the scanner as environment variables. The scanned project is described by the predefined CI variables.

SAST, Dependency Scanning

SAST and Dependency Scanning scanners must scan the files in the project directory, given by the CI_PROJECT_DIR variable.

Container Scanning

In order to be consistent with the official Container Scanning for GitLab, scanners must scan the Docker image whose name and tag are given by CI_APPLICATION_REPOSITORY and CI_APPLICATION_TAG, respectively.

If not provided, CI_APPLICATION_REPOSITORY should default to $CI_REGISTRY_IMAGE/$CI_COMMIT_REF_SLUG, which is a combination of predefined CI variables. CI_APPLICATION_TAG should default to CI_COMMIT_SHA.

The scanner should sign in the Docker registry using the variables DOCKER_USER and DOCKER_PASSWORD. If these are not defined, then the scanner should use CI_REGISTRY_USER and CI_REGISTRY_PASSWORD as default values.

Configuration files

While scanners may use CI_PROJECT_DIR to load specific configuration files, it is recommended to expose configuration as environment variables, not files.

Output file

Like any artifact uploaded to the GitLab CI, the Secure report generated by the scanner must be written in the project directory, given by the CI_PROJECT_DIR environment variable.

It is recommended to name the output file after the type of scanning, and to use gl- as a prefix. Since all Secure reports are JSON files, it is recommended to use .json as a file extension. For instance, a suggested file name for a Dependency Scanning report is gl-dependency-scanning.json.

The artifacts:reports keyword of the job definition must be consistent with the file path where the Security report is written. For instance, if a Dependency Scanning analyzer writes its report to the CI project directory, and if this report file name is depscan.json, then artifacts:reports:dependency_scanning must be set to depscan.json.

Exit code

Following the POSIX exit code standard, the scanner will exit with 0 for success and any number from 1 to 255 for anything else. Success also includes the case when vulnerabilities are found.

Logging

The scanner should log error messages and warnings so that users can easily investigate misconfiguration and integration issues by looking at the log of the CI scanning job.

Scanners may use ANSI escape codes to colorize the messages they write to the Unix standard output and standard error streams. We recommend using red to report errors, yellow for warnings, and green for notices. Also, we recommend prefixing error messages with [ERRO], warnings with [WARN], and notices with [INFO].

Report

The report is a JSON document that combines vulnerabilities with possible remediations.

This documentation gives an overview of the report JSON format, as well as recommendations and examples to help integrators set its fields. The format is extensively described in the documentation of SAST, Dependency Scanning, and Container Scanning.

The DAST variant of the report JSON format is not documented at the moment.

Version

The documentation of SAST, Dependency Scanning, and Container Scanning describes the Secure report format version.

Vulnerabilities

The vulnerabilities field of the report is an array of vulnerability objects.

Category

The value of the category field matches the report type: dependency_scanning, container_scanning, sast, and dast.

Scanner

The scanner field is an object that embeds a human-readable name and a technical id. The id should not collide with any other scanner another integrator would provide.

Name, message, and description

The name and message fields contain a short description of the vulnerability, whereas the description field provides more details.

The name is context-free and contains no information on where the vulnerability has been found, whereas the message may repeat the location.

For instance, a message for a vulnerability reported by Dependency Scanning gives information on the vulnerable dependency, which is redundant with the location field of the vulnerability. The name field is preferred but the message field is used when the context/location cannot be removed from the title of the vulnerability.

To illustrate, here is an example vulnerability object reported by a Dependency Scanning scanner, and where the message repeats the location field:

{
    "location": {
        "dependency": {
            "package": {
            "name": "debug"
          }
        }
    },
    "name": "Regular Expression Denial of Service",
    "message": "Regular Expression Denial of Service in debug",
    "description": "The debug module is vulnerable to regular expression denial of service
        when untrusted user input is passed into the `o` formatter.
        It takes around 50k characters to block for 2 seconds making this a low severity issue."
}

The description might explain how the vulnerability works or give context about the exploit. It should not repeat the other fields of the vulnerability object. In particular, the description should not repeat the location (what is affected) or the solution (how to mitigate the risk).

There is a proposal to remove either the name or the message, to remove ambiguities. See issue #36779.

Solution

The solution field may contain instructions users should follow to fix the vulnerability or to mitigate the risk. It is intended for users whereas the remediations objects are processed automatically by GitLab.

Identifiers

The identifiers array describes the vulnerability flaw that has been detected. An identifier object has a type and a value; these technical fields are used to tell if two identifiers are the same. It also has a name and a url; these fields are used to display the identifier in the user interface.

It is recommended to reuse the identifiers the GitLab scanners already define:

Identifier Type Example value
CVE cve CVE-2019-10086
CWE cwe CWE-1026
OSVD osvdb OSVDB-113928
USN usn USN-4234-1
WASC wasc WASC-19
RHSA rhsa RHSA-2020:0111
ELSA elsa ELSA-2020-0085

The generic identifiers listed above are defined in the common library; this library is shared by the analyzers maintained by GitLab, and this is where you can contribute new generic identifiers. Analyzers may also produce vendor-specific or product-specific identifiers; these do not belong to the common library.

The first item of the identifiers array is called the primary identifier. The primary identifier is particularly important, because it is used to track vulnerabilities as new commits are pushed to the repository.

Identifiers are used to merge duplicate vulnerabilities reported for the same commit, except for CWE and WASC.

Location

The location indicates where the vulnerability has been detected. The format of the location depends on the type of scanning.

Internally GitLab extracts some attributes of the location to generate the location fingerprint, which is used to track vulnerabilities as new commits are pushed to the repository. The attributes used to generate the location fingerprint also depend on the type of scanning.

Dependency Scanning

The location of a Dependency Scanning vulnerability is composed of a dependency and a file. The dependency object describes the affected package and the dependency version. package embeds the name of the affected library/module. file is the path of the dependency file that declares the affected dependency.

For instance, here is the location object for a vulnerability affecting version 4.0.11 of npm package handlebars:

{
    "file": "client/package.json",
    "dependency": {
        "package": {
            "name": "handlebars"
        },
        "version": "4.0.11"
    }
}

This affected dependency is listed in client/package.json, a dependency file processed by npm or yarn.

The location fingerprint of a Dependency Scanning vulnerability combines the file and the package name, so these attributes are mandatory. All other attributes are optional.

Container Scanning

Similar to Dependency Scanning, the location of a Container Scanning vulnerability has a dependency and a file. It also has an operating_system field.

For instance, here is the location object for a vulnerability affecting version 2.50.3-2+deb9u1 of Debian package glib2.0:

{
    "dependency": {
        "package": {
            "name": "glib2.0"
        },
    },
    "version": "2.50.3-2+deb9u1",
    "operating_system": "debian:9",
    "image": "registry.gitlab.com/example/app:latest"
}

The affected package is found when scanning the Docker image registry.gitlab.com/example/app:latest. The Docker image is based on debian:9 (Debian Stretch).

The location fingerprint of a Container Scanning vulnerability combines the operating_system and the package name, so these attributes are mandatory. The image is also mandatory. All other attributes are optional.

SAST

The location of a SAST vulnerability must have a file and a start_line field, giving the path of the affected file, and the affected line number, respectively. It may also have an end_line, a class, and a method.

For instance, here is the location object for a security flaw found at line 41 of src/main/java/com/gitlab/example/App.java, in the the generateSecretToken method of the com.gitlab.security_products.tests.App Java class:

{
    "file": "src/main/java/com/gitlab/example/App.java",
    "start_line": 41,
    "end_line": 41,
    "class": "com.gitlab.security_products.tests.App",
    "method": "generateSecretToken1"
}

The location fingerprint of a SAST vulnerability combines file, start_line, and end_line, so these attributes are mandatory. All other attributes are optional.

Tracking, merging vulnerabilities

Users may give feedback on a vulnerability:

  • they may dismiss a vulnerability if it does not apply to their projects
  • or they may create an issue for a vulnerability, if there is a possible threat

GitLab tracks vulnerabilities so that user feedback is not lost when new Git commits are pushed to the repository. Vulnerabilities are tracked using a combination of three attributes:

Right now, GitLab cannot track a vulnerability if its location changes as new Git commits are pushed, and this results in user feedback being lost. For instance, user feedback on a SAST vulnerability is lost if the affected file is renamed or the affected line moves down. This is addressed in issue #7586.

In some cases, the multiple scans executed in the same CI pipeline result in duplicates that are automatically merged using the vulnerability location and identifiers. Two vulnerabilities are considered to be the same if they share the same location fingerprint and at least one identifier. Two identifiers are the same if they share the same type and id. CWE and WASC identifiers are not considered because they describe categories of vulnerability flaws, but not specific security flaws.

Severity and confidence

The severity field describes how much the vulnerability impacts the software, whereas the confidence field describes how reliable the assessment of the vulnerability is. The severity is used to sort the vulnerabilities in the security dashboard.

The severity ranges from Info to Critical, but it can also be Unknown. Valid values are: Unknown, Info, Low, Medium, High, or Critical

The confidence ranges from Low to Confirmed, but it can also be Unknown, Experimental or even Ignore if the vulnerability is to be ignored. Valid values are: Ignore, Unknown, Experimental, Low, Medium, High, or Confirmed

Remediations

The remediations field of the report is an array of remediation objects. Each remediation describes a patch that can be applied to automatically fix a set of vulnerabilities.

Currently, remediations rely on a deprecated field named cve to reference vulnerabilities, so it is recommended not to use them until a new format has been defined. See issue #36777.